USB problem after time_t change

[Tristan Le Guern]

 hub rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 Intel 3400 HD Audio rev 0x05: msi
azalia0: codecs: IDT 92HD81B1X, Intel/0x2804, using IDT 92HD81B1X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 Intel 3400 PCIE rev 0x05: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 Intel 3400 PCIE rev 0x05: msi
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 Intel Centrino Advanced-N 6200 rev
0x35: msi, MIMO 2T2R, MoW, address 18:3d:a2:11:a8:c8
ppb2 at pci0 dev 28 function 2 Intel 3400 PCIE rev 0x05: msi
pci3 at ppb2 bus 3
cbb0 at pci3 dev 0 function 0 vendor Ricoh, unknown product 0xe476
rev 0x02: apic 2 int 18
sdhc0 at pci3 dev 0 function 1 Ricoh 5U822 SD/MMC rev 0x03: apic 2 int 19
sdmmc0 at sdhc0
Ricoh 5U832 Firewire rev 0x03 at pci3 dev 0 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ppb3 at pci0 dev 28 function 3 Intel 3400 PCIE rev 0x05: msi
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 5 Intel 3400 PCIE rev 0x05: msi
pci5 at ppb4 bus 11
bge0 at pci5 dev 0 function 0 Broadcom BCM5761E rev 0x10, BCM5761 A1
(0x5761100): apic 2 int 17, address 78:2b:cb:cc:e7:f1
brgphy0 at bge0 phy 1: BCM5761 10/100/1000baseT PHY, rev. 0
ehci1 at pci0 dev 29 function 0 Intel 3400 USB rev 0x05: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xa5
pci6 at ppb5 bus 12
pcib0 at pci0 dev 31 function 0 Intel HM55 LPC rev 0x05
ahci0 at pci0 dev 31 function 2 Intel 3400 AHCI rev 0x05: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: ATA, ST9250410AS, D005 SCSI3 0/direct
fixed naa.5000c5002f6bb427
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus0 targ 1 lun 0: PLDS, DVD+-RW DS-8A5SH, XD12 ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 Intel 3400 SMBus rev 0x05: apic 2 int 18
iic0 at ichiic0
lisa0 at iic0 addr 0x1d: lis331dl
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
itherm0 at pci0 dev 31 function 6 Intel 3400 Thermal rev 0x05
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
pci7 at mainbus0 bus 63
pchb1 at pci7 dev 0 function 0 Intel QuickPath rev 0x02
pchb2 at pci7 dev 0 function 1 Intel QuickPath rev 0x02
pchb3 at pci7 dev 2 function 0 Intel QPI Link rev 0x02
pchb4 at pci7 dev 2 function 1 Intel QPI Physical rev 0x02
pchb5 at pci7 dev 2 function 2 Intel Reserved rev 0x02
pchb6 at pci7 dev 2 function 3 Intel Reserved rev 0x02
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 Intel Rate Matching Hub rev 2.00/0.00 addr 2
uvideo0 at uhub2 port 4 configuration 1 interface 0
CN0VWKTR7248712IA1D4A00 Laptop_Integrated_Webcam_2M rev 2.00/9c.17
addr 3
video0 at uvideo0
uhub3 at uhub1 port 1 Intel Rate Matching Hub rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 3 configuration 1 interface 0 Logitech USB-PS/2
Optical Mouse rev 2.00/20.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (6d20ff977a075eb7.a) swap on sd0b dump on sd0b

usbdevs -dv:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x),
Intel(0x8086), rev 1.00
  uhub0
 port 1 addr 2: high speed, self powered, config 1, Rate Matching
Hub(0x0020), Intel(0x8087), rev 0.00
   uhub2
  port 1 powered
  port 2 powered
  port 3 powered
  port 4 addr 3: high speed, power 168 mA, config 1,
Laptop_Integrated_Webcam_2M(0x6419), CN0VWKTR7248712IA1D4A00(0x0c45),
rev 9c.17
uvideo0
  port 5 powered
  port 6 powered
 port 2 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x),
Intel(0x8086), rev 1.00
  uhub1
 port 1 addr 2: high speed, self powered, config 1, Rate Matching
Hub(0x0020), Intel(0x8087), rev 0.00
   uhub3
  port 1 powered
  port 2 powered
  port 3 powered
  port 4 addr 3: low speed, power 98 mA, config 1, USB-PS/2 Optical
Mouse(0xc03e), Logitech(0x046d), rev 20.00
uhidev0
  port 5 powered
  port 6 powered
  port 7 powered
  port 8 powered
 port 2 powered

-- 
Tristan Le Guern
Epitech 2013

Re: X11 on Dell Latitude E5410

[Tristan Le Guern]

On Fri, Mar 22, 2013 at 10:07 PM, Matthieu Herrb mhe...@gmail.com wrote:
 Try a -current snapshot.  There is support for recent Intel HD graphics now.
Hi,

I have just updated and it works well, there is no more segfault of X
at startup and I can watch movies, launch Xephyr or play high
resolution Nethack in console.

Thanks :)
--
Tristan Le Guern

Re: X11 on Dell Latitude E5410

[Tristan Le Guern]

Hi,

I can have a working system using a striped down xorg.conf with the
vesa(4) driver, but it doesn't explain all the mess I had.

Sorry for the noise anyway.
---8---
Section Device
Identifier  Card0
Driver  vesa
BusID   PCI:0:2:0
EndSection

Section Monitor
Identifier   Monitor0
VendorName   Monitor Vendor
ModelNameMonitor Model
EndSection

Section Screen
Identifier Screen0
Device Card0
MonitorMonitor0
SubSection Display
Viewport   0 0
Depth 1
EndSubSection
SubSection Display
Viewport   0 0
Depth 4
EndSubSection
SubSection Display
Viewport   0 0
Depth 8
EndSubSection
SubSection Display
Viewport   0 0
Depth 15
EndSubSection
SubSection Display
Viewport   0 0
Depth 16
EndSubSection
SubSection Display
Viewport   0 0
Depth 24
EndSubSection
EndSection
---8---
--
Tristan Le Guern

Re: Help neede for 'pkgin'

[Tristan Le Guern]

On Tue, Jul 10, 2012 at 12:00 PM, srimanta kundu
srimanta_ku...@polarisnetworks.net wrote:
 Hello Sir,

 I have installed netBSD 5.1.2 via VMWare Player. But I cannot use
 the 'pkgin' command there. It is shown the command not found.
 Please tell how
 can get that command in my netBSD?
pkgin is not in NetBSD base system, you have to install it with pkg_add first.

 After installing that I want to update the
 openSSL from 0.9.9 to 1.0.1 using pkgin. So what will be the exact command to
 do that.
man pkgin

 With best regards.
You should ask question on the good mailing list.

-- 
Tristan Le Guern
Epitech 2013

urndis

[Tristan Le Guern]

I tested it on my loongson with my HTC Legend and it works well :)

[...]
umass1 at uhub1 port 3 configuration 1 interface 0 HTC Android Phone
rev 2.00/2.26 addr 4
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 1 targets
sd1 at scsibus3 targ 0 lun 0: HTC, Android Phone, 0100 SCSI2
0/direct removable serial.0bb40ff9SH0AGNX00011
sd1 detached
scsibus3 detached
umass1 detached
urndis0 at uhub1 port 3 configuration 1 interface 0 HTC Android
Phone rev 2.00/2.26 addr 4
urndis0: address d2:0e:6f:45:ab:58
[...]

-- 
Tristan Le Guern

Re: How does OpenBSD compare to Ubuntu Server?

[Tristan Le Guern]

On Thu, Jul 7, 2011 at 3:02 PM, Juan Miscaro jmisc...@gmail.com wrote:
 Was wondering what advantages OpenBSD has over a progressive Linux
 distribution such as Ubuntu (Server edition).  One thing I noticed is
 that they're having a hell of a time transitioning away from the
 traditional sysvinit-based system to the Upstart event-based init
 daemon system.

Advantages ? You don't fear to upgrade OpenBSD.

--
Tristan Le Guern
Epitech 2013