I am running OBSD 4.0-release (i386) on Toshiba Satellite A30.
I started apmd and here's my ps output
root 10023 0.0 0.1 240 316 ?? Ss 5:57AM0:00.00 apmd
But when I do apm it says
Battery state: unknown, 0% remaining, unknown life estimate
A/C adapter state: not known
Performance adjustment mode: manual (3200 MHz)
Also, halt -p doesn't work and I need to hard-shutdown. I got powerdown=YES
in /etc/rc.shutdown.
Here's my dmesg -
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz (GenuineIntel
686-class) 3.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 468676608 (457692K)
avail mem = 419454976 (409624K)
using 4256 buffers containing 23535616 bytes (22984K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(4a) BIOS, date 04/07/05, BIOS32 rev. 0 @
0xfd700, SMBIOS rev. 2.31 @ 0xd6010 (31 entries)
bios0: TOSHIBA Satellite A30
pcibios0 at bios0: rev 2.1 @ 0xfd700/0x900
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/224 (12 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1002 product 0x434c
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc/0xf000 0xd/0x6000! 0xd6000/0x800! 0xd8000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 ATI RS300_133 Host rev 0x02
ppb0 at pci0 dev 1 function 0 ATI Radeon IGP 9100 AGP rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 ATI Radeon Mobility IGP 9100 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 19 function 0 ATI SB200 USB rev 0x01: irq 11,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 19 function 1 ATI SB200 USB rev 0x01: irq 11,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 19 function 2 ATI SB200 USB2 rev 0x01: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
piixpm0 at pci0 dev 20 function 0 ATI SB200 SMBus rev 0x17: SMI
iic0 at piixpm0
pciide0 at pci0 dev 20 function 1 ATI IXP200 IDE rev 0x00: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: HITACHI_DK23FA-60
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: TOSHIBA, DVD-ROM SD-R6112, 1031 SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pcib0 at pci0 dev 20 function 3 ATI SB200 PCI-ISA rev 0x00
ppb1 at pci0 dev 20 function 4 ATI SB200 PCI-PCI rev 0x00
pci2 at ppb1 bus 2
TI TSB43AB21 FireWire rev 0x00 at pci2 dev 0 function 0 not configured
ath0 at pci2 dev 2 function 0 Atheros AR5212 rev 0x01: irq 11
ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR4W, address 00:90:96:72:4d:f1
rl0 at pci2 dev 3 function 0 Realtek 8139 rev 0x10: irq 11, address
00:02:3f:d3:3a:7b
rlphy0 at rl0 phy 0: RTL internal PHY
cbb0 at pci2 dev 4 function 0 ENE CB-1410 CardBus rev 0x01: irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
auixp0 at pci0 dev 20 function 5 ATI IXP200 AC97 rev 0x00: irq 11
auixp0: soft resetting aclink
auixp0: not up; resetting aclink hardware
auixp0: not up; resetting aclink hardware
auixp0: aclink hardware reset successful
ATI IXP200 Modem rev 0x01 at pci0 dev 20 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ef75 netmask ef75 ttymask fff7
pctr: user-level cycle counter enabled
ath1 at cardbus0 dev 0 function 0 Atheros Communications, Inc.,
AR5001--, Wireless LAN Reference Card: irq 11
ath1: AR5213 7.9 phy 4.5 rf2112a 5.6: RF radio not supported
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ac97: codec id 0x414c4740 (Avance Logic ALC202)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auixp0
ath0: device timeout
