Re: 1440x900 resolution problem
On 9/21/07, Marius ROMAN [EMAIL PROTECTED] wrote: Like Darrin suggested try matching Modelines and Modes : On xorg.conf Enable only this (comment the rest of the modellines) : Modeline 1680x1050_60.00 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync Modify the screen section : Section Screen Identifier Screen0 Device Card0 MonitorMonitor0 DefaultDepth 24 SubSection Display Depth 24 Modes 1680x1050_60.00 EndSubSection EndSection How many times should I repeat that the current i810 and vesa drivers can only use the modes that the BIOS knows about? You need to use the i915resolution from ports to fix your bios for now. In the future, Xenocara will be updated to use the intel 2.x driver which doesn't rely on the BIOS for defining the modes anymore, it should make things easier. (Although the BIOS is still needed for other informations, and it turns out that there are also lots of quirks there,,,)
Re: 1440x900 resolution problem
Like Darrin suggested try matching Modelines and Modes : On xorg.conf Enable only this (comment the rest of the modellines) : Modeline 1680x1050_60.00 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync Modify the screen section : Section Screen Identifier Screen0 Device Card0 MonitorMonitor0 DefaultDepth 24 SubSection Display Depth 24 Modes 1680x1050_60.00 EndSubSection EndSection Marius On 9/21/07, Genadijus Paleckis [EMAIL PROTECTED] wrote: I have similar problem and it is still unresolved. My video card Intel i810 and monitor is Samsung SyncMaster 226CW, I'm trying to use 1680x1050 with no success. What I found is that I cannot force to use 60Hz vertrefresh and card uses 75Hz instead. gtf's suggestion boo$ gtf 1680 1050 60 # 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz Modeline 1680x1050_60.00 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync xorg.conf's monitor and screen sections: Section Monitor Identifier Monitor0 Option DPMS # from Xorg.0.log HorizSync30-81 VertRefresh 56-75 # GTF suggestion Modeline 1680x1050_1 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync # numbers from Xorg.0.log ModeLine 1680x1050_2 119.0 1680 1728 1760 1840 1050 1053 1059 1080 EndSection Section Screen Identifier Screen0 Device Card0 MonitorMonitor0 DefaultDepth 24 SubSection Display Depth 24 Modes 1680x1050_1 1680x1050_2 EndSubSection EndSection
Re: 1440x900 resolution problem
Tried and as before it stuck at 75Hz resulting in 1280x1024. Some time ago I've somewhere read that on linux with Xorg 7.2 someone also had this problem (I don't know if I can call it same problem, it has widescreen LCD, i810 driver) and solved it by updating i810 driver, xrandr to 1.2 and some other libs from Xorg's git tree. Because 7.3 is already released and Matthieu Herrb is doing his hard work to move xenocara to 7.3 I guess that in near future I also will be pleased with 1680x1050 :) Marius ROMAN wrote: Like Darrin suggested try matching Modelines and Modes : On xorg.conf Enable only this (comment the rest of the modellines) : Modeline 1680x1050_60.00 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync Modify the screen section : Section Screen Identifier Screen0 Device Card0 MonitorMonitor0 DefaultDepth 24 SubSection Display Depth 24 Modes 1680x1050_60.00 EndSubSection EndSection Marius On 9/21/07, Genadijus Paleckis [EMAIL PROTECTED] wrote: I have similar problem and it is still unresolved. My video card Intel i810 and monitor is Samsung SyncMaster 226CW, I'm trying to use 1680x1050 with no success. What I found is that I cannot force to use 60Hz vertrefresh and card uses 75Hz instead. gtf's suggestion boo$ gtf 1680 1050 60 # 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz Modeline 1680x1050_60.00 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync xorg.conf's monitor and screen sections: Section Monitor Identifier Monitor0 Option DPMS # from Xorg.0.log HorizSync30-81 VertRefresh 56-75 # GTF suggestion Modeline 1680x1050_1 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync # numbers from Xorg.0.log ModeLine 1680x1050_2 119.0 1680 1728 1760 1840 1050 1053 1059 1080 EndSection Section Screen Identifier Screen0 Device Card0 MonitorMonitor0 DefaultDepth 24 SubSection Display Depth 24 Modes 1680x1050_1 1680x1050_2 EndSubSection EndSection
1440x900 resolution problem
Hi misc, I can't get the 1440x900 resolution on my Samsung 940BW flat panel screen to work. I searched the lists but found nothing that could help me. Xorg.0.log says something like this : (II) ATI(0): Not using mode 1440x900 (no mode of this name) Using gtf (gtf 1440 900 60) I have added : Modeline 1440x900_60.00 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync to the Monitor section on xorg.conf. Any ideas ? /var/log/Xorg.0.log = (--) checkDevMem: using aperture driver /dev/xf86 (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) (WW) xf86AcquireGART: AGPIOC_ACQUIRE failed (Device not configured) (WW) GARTInit: AGPIOC_INFO failed (Device not configured) X Window System Version 6.9.0 (for OpenBSD) Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release 6.9 Build Operating System: OpenBSD 4.1 i386 [ELF] Current Operating System: OpenBSD localhost 4.1 GENERIC#1450 i386 Build Date: 07 March 2007 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Tue Sep 18 21:14:49 2007 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout X.org Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Card0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11 /fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (**) ModulePath set to /usr/X11R6/lib/modules (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.8 X.Org XInput driver : 0.5 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on openbsd (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so (II) Module bitmap: vendor=X.Org Foundation compiled for 6.9.0, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1166,0009 card , rev 06 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 1166,0009 card , rev 06 class 06,00,00 hdr 80 (II) PCI: 00:02:0: chip 8086,1229 card 1028,009b rev 08 class 02,00,00 hdr 00 (II) PCI: 00:06:0: chip 125d,1969 card 125d, rev 01 class 04,01,00 hdr 00 (II) PCI: 00:0e:0: chip 1002,4752 card 1028,00ce rev 27 class 03,00,00 hdr 00 (II) PCI: 00:0f:0: chip 1166,0200 card 1166,0200 rev 50 class 06,01,00 hdr 80 (II) PCI: 00:0f:1: chip 1166,0211 card , rev 00 class 01,01,8a hdr 80 (II) PCI: 00:0f:2: chip 1166,0220 card 1166,0220 rev 04 class 0c,03,10 hdr 80 (II) PCI: 01:02:0: chip 9005,00cf card 1028,00ce rev 01 class 01,00,00 hdr 80 (II) PCI: 01:02:1: chip 9005,00cf card 1028,00ce rev 01 class 01,00,00 hdr 80 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:15:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Host-to-PCI bridge: (II) Bus 1: bridge is at (0:0:0), (1,1,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (--) PCI:*(0:14:0) ATI Technologies Inc Rage XL rev 39, Mem @ 0xfc00/24, 0xfe101000/12, I/O @ 0xe800/8 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [1] -1 0 0x000f - 0x000f (0x1) MX[B] [2] -1 0 0x000c - 0x000e (0x3) MX[B] [3] -1 0 0x - 0x0009 (0xa) MX[B] [4] -1 0 0x -
Re: 1440x900 resolution problem
On Tue, Sep 18, 2007 at 09:44:14PM +0300, Marius ROMAN wrote: (II) ATI(0): Not using mode 1440x900 (no mode of this name) Using gtf (gtf 1440 900 60) I have added : Modeline 1440x900_60.00 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync to the Monitor section on xorg.conf. Try matching the name in the Modeline and the one you use in Modes. IOW, use 1440x900_60.00 in both places. Or use 1400x900 in both places. -- Darrin Chandler| Phoenix BSD User Group | MetaBUG [EMAIL PROTECTED] | http://phxbug.org/ | http://metabug.org/ http://www.stilyagin.com/ | Daemons in the Desert | Global BUG Federation
Re: 1440x900 resolution problem
I'm no pro, and anyone please correct me if I'm wrong, but this might work... in xorg.conf under section monitor... paste this before endsection: Modeline1440x900 134.52 1440 1536 1688 1936 900 901 904 939 Modeline1440x900 132.71 1440 1536 1688 1936 900 901 904 939 Modeline1440x900 130.75 1440 1536 1688 1936 900 901 904 938 up above it where you have horiz vert, you might try: HorizSync31-81 VertRefresh 56-76 ...or maybe... HorizSync 30-92 (I might be off on that) VertRefresh 60-170 (I might be off on that too) And in section screen under subsection display you might want to update to something like... SubSection Display Depth 16 Modes 1440x900 1280x960 1366x768 1280x800 1152x864 1280x768 1024x768 1280x600 1024x600 800x600 768x576 640x480 EndSubSection SubSection Display Depth 24 Modes 1440x900 1280x960 1366x768 1280x800 1152x864 1280x768 1024x768 1280x600 1024x600 800x600 768x576 640x480 EndSubSection SubSection Display Depth 8 Modes 1440x900 1280x960 1366x768 1280x800 1152x864 1280x768 1024x768 1280x600 1024x600 800x600 768x576 640x480 EndSubSection Again, apologies in advance if my inexperience has provided incorrect information. I've adjusted my 1680x1050 resolution settings similarly to that above and it worked. Though it might be different for you depending on what all you are using, I'm not sure. -Sean On Tue, Sep 18, 2007 at 09:44:14PM +0300, Marius ROMAN wrote: Hi misc, I can't get the 1440x900 resolution on my Samsung 940BW flat panel screen to work. I searched the lists but found nothing that could help me. Xorg.0.log says something like this : (II) ATI(0): Not using mode 1440x900 (no mode of this name) Using gtf (gtf 1440 900 60) I have added : Modeline 1440x900_60.00 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync to the Monitor section on xorg.conf. Any ideas ? /var/log/Xorg.0.log = (--) checkDevMem: using aperture driver /dev/xf86 (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) (WW) xf86AcquireGART: AGPIOC_ACQUIRE failed (Device not configured) (WW) GARTInit: AGPIOC_INFO failed (Device not configured) X Window System Version 6.9.0 (for OpenBSD) Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release 6.9 Build Operating System: OpenBSD 4.1 i386 [ELF] Current Operating System: OpenBSD localhost 4.1 GENERIC#1450 i386 Build Date: 07 March 2007 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Tue Sep 18 21:14:49 2007 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout X.org Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Card0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/ X11/fonts/Type1/,/usr/X11R6/lib/X11 /fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (**) ModulePath set to /usr/X11R6/lib/modules (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.8 X.Org XInput driver : 0.5 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on openbsd (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so (II) Module bitmap: vendor=X.Org Foundation compiled for 6.9.0, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1166,0009 card , rev 06 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 1166,0009 card , rev 06 class 06,00,00 hdr 80 (II) PCI: 00:02:0: chip 8086,1229 card 1028,009b rev 08 class 02,00,00 hdr 00 (II) PCI: 00:06:0: chip 125d,1969 card 125d, rev 01 class 04,01,00 hdr 00 (II) PCI: 00:0e:0: chip 1002,4752 card 1028,00ce rev 27 class 03,00,00 hdr 00 (II) PCI: 00:0f:0: chip 1166,0200 card 1166,0200 rev 50 class 06,01,00 hdr 80 (II) PCI: 00:0f:1: chip 1166,0211 card , rev 00 class 01,01,8a hdr 80 (II) PCI: 00:0f:2: chip 1166,0220 card 1166,0220 rev 04 class 0c,03,10 hdr 80 (II) PCI: 01:02:0: chip 9005,00cf card 1028,00ce rev 01 class 01,00,00 hdr 80 (II) PCI: 01:02:1: chip
