4.1 upgrade problem - im apps logout

2007-07-09 Thread Joe S

After I upgraded to 4.1, I have noticed a new problem. Instant
messaging applications will get randomly disconnected for no apparent
reason. It seems as though the sessions are timing out somewhere
between 30-60 minutes of non-use.

Has anyone else ran into this?


OpenBSD 4.1-stable (GENERIC) #0: Mon Jun 18 15:37:09 PDT 2007
   [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 1500MHz (CentaurHauls 686-class) 1.50 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
real mem  = 469254144 (458256K)
avail mem = 420294656 (410444K)
using 4278 buffers containing 23588864 bytes (23036K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 01/02/06, BIOS32 rev. 0 @
0xf9350, SMBIOS rev. 2.3 @ 0xf0800 (39 entries)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf/0xc4e4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc440/160 (8 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 8 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 10 11 15
pcibios0: PCI Interrupt Router at 000:17:0 (VIA VT8237 ISA rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc/0xfc00 0xd/0x8000! 0xd8000/0x4400!
0xdd000/0x1000 0xde000/0x1800 0xe/0x1800
acpi at mainbus0 not configured
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100f1308000f13
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1500 MHz (1004 mV): speeds: 1500, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 VIA CN700 Host rev 0x00
pchb1 at pci0 dev 0 function 1 VIA CN700 Host rev 0x00
pchb2 at pci0 dev 0 function 2 VIA CN700 Host rev 0x00
pchb3 at pci0 dev 0 function 3 VIA PT890 Host rev 0x00
pchb4 at pci0 dev 0 function 4 VIA CN700 Host rev 0x00
pchb5 at pci0 dev 0 function 7 VIA CN700 Host rev 0x00
ppb0 at pci0 dev 1 function 0 VIA VT8377 AGP rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 VIA S3 Unichrome PRO IGP rev 0x01:
aperture at 0xf400, size 0x1000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
VIA VT6306 FireWire rev 0x80 at pci0 dev 13 function 0 not configured
vge0 at pci0 dev 14 function 0 VIA VT612x rev 0x11: irq 10, address
00:40:63:e6:8d:d4
ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 2
pciide0 at pci0 dev 15 function 0 VIA VT6420 SATA rev 0x80: DMA
pciide0: using irq 15 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: ST98823AS
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
uhci0 at pci0 dev 16 function 0 VIA VT83C572 USB rev 0x81: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 VIA VT83C572 USB rev 0x81: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 VIA VT83C572 USB rev 0x81: irq 15
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 VIA VT83C572 USB rev 0x81: irq 15
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 VIA VT6202 USB rev 0x86: irq 10
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viapm0 at pci0 dev 17 function 0 VIA VT8237 ISA rev 0x00
iic0 at viapm0
fxp0 at pci0 dev 19 function 0 Intel 8255x rev 0x10, i82551: irq 11,
address 00:0e:0c:a2:be:dd
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci0 dev 20 function 0 Intel 8255x rev 0x10, i82551: irq 15,
address 00:0e:0c:a2:be:e1
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask efe5 netmask efe5 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302



/etc/pf.conf

# Firewall Ruleset

# OBJECTS
ext_if  = fxp0
lan_if  = vlan0

Re: 4.1 upgrade problem

2007-06-25 Thread Arnaud Bergeron

For the archives:

After a lot of head scratching, I discovered that symlinking /var/www
to somewhere else using an absolute path causes problems such as what
I was seeing during install.  It is normal since the root location
changes.  Use relative symlinks.