Re: AR5424 diffirent errors before and after recompiling same kernel
From binary kernel -- Forwarded message -- From: Sergey Kish sergey.k...@gmail.com Date: Wed, Jan 26, 2011 at 5:18 PM Subject: Acer Aspire One 751, Atheros AR5424 doesn't work To: dm...@openbsd.org OpenBSD 4.8 (GENERIC) #1: Wed Jan 26 12:03:41 EET 2011 r...@sergeykish.my.domain:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz (GenuineIntel 686-class) 1.25 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,xTPR, PDCM,MOVBE real mem = 1063514112 (1014MB) avail mem = 1036156928 (988MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 09/22/09, BIOS32 rev. 0 @ 0xfda50, SMBIOS rev. 2.5 @ 0x3f6bf000 (35 entries) bios0: vendor Acer version V0.3210 date 09/22/2009 bios0: Acer AO751h acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET MCFG TCPA TMOR APIC BOOT SLIC SSDT acpi0: wakeup devices PWRB(S3) PXS1(S5) PXS2(S3) USB1(S3) USB2(S3) EHC1(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 124MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (RP01) acpiprt2 at acpi0: bus 3 (RP02) acpiec0 at acpi0 acpicpu0 at acpi0: C1, PSS acpitz0 at acpi0: critical temperature 95 degC acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT1 not present acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PWRB acpibtn2 at acpi0: SLPB acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD01 acpivout1 at acpivideo0: DD02 acpivout2 at acpivideo0: DD04 acpivout3 at acpivideo0: DD05 acpivout4 at acpivideo0: DD04 acpivout5 at acpivideo0: DD05 bios0: ROM list: 0xc/0xe600! 0xce800/0x1000 0xe/0x1800! cpu0: Enhanced SpeedStep 1242 MHz: speeds: 1333, 1067, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel US15W Host rev 0x07 vga1 at pci0 dev 2 function 0 Intel US15W Video rev 0x07 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp at vga1 not configured azalia0 at pci0 dev 27 function 0 Intel SCH HD Audio rev 0x07: apic 2 int 22 (irq 10) azalia0: codecs: Realtek ALC272 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel SCH PCIE rev 0x07: apic 2 int 17 (irq 4) pci1 at ppb0 bus 2 re0 at pci1 dev 0 function 0 Realtek 8101E rev 0x02: RTL8102EL (0x2480), apic 2 int 16 (irq 7), address 00:23:8b:b3:c4:e7 rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ppb1 at pci0 dev 28 function 1 Intel SCH PCIE rev 0x07: apic 2 int 16 (irq 7) pci2 at ppb1 bus 3 mem address conflict 0xd000/0x1 ath0 at pci2 dev 0 function 0 Atheros AR5424 rev 0x01: apic 2 int 17 (irq 4) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2c:6f:ab:c0 uhci0 at pci0 dev 29 function 0 Intel SCH USB rev 0x07: apic 2 int 23 (irq 10) uhci1 at pci0 dev 29 function 1 Intel SCH USB rev 0x07: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2 Intel SCH USB rev 0x07: apic 2 int 18 (irq 3) ehci0 at pci0 dev 29 function 7 Intel SCH USB rev 0x07: apic 2 int 21 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel SCH LPC rev 0x07 pciide0 at pci0 dev 31 function 1 Intel SCH IDE rev 0x07: DMA, channel 0 wired to compatibility wd0 at pciide0 channel 0 drive 0: OCZ-VERTEX wd0: 1-sector PIO, LBA48, 61057MB, 125045424 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uvideo0 at uhub0 port 4 configuration 1 interface 0 SuYin WebCam rev 2.00/2.22 addr 2 video0 at uvideo0 umass0 at uhub0 port 7 configuration 1 interface 0 Generic USB2.0-CRW rev 2.00/58.88 addr 3 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: Generic-, Multi-Card, 1.00 SCSI0 0/direct removable sd0: 15193MB, 512 bytes/sec, 31116288 sec total softraid0 at root root on sd0a swap on sd0b dump on sd0b hw.sensors.acpitz0.temp0=55.00 degC (zone temperature) hw.sensors.acpiac0.indicator0=On (power supply) hw.sensors.acpibat0.volt0=11.10 VDC (voltage)
Re: AR5424 diffirent errors before and after recompiling same kernel
Now with recompiled kernel OpenBSD 4.8 (GENERIC) #3: Fri Jan 28 10:04:06 EET 2011 r...@sergeykish.my.domain:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz (GenuineIntel 686-class) 1.25 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,xTPR, PDCM,MOVBE real mem = 1063514112 (1014MB) avail mem = 1036156928 (988MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 09/22/09, BIOS32 rev. 0 @ 0xfda50, SMBIOS rev. 2.5 @ 0x3f6bf000 (35 entries) bios0: vendor Acer version V0.3210 date 09/22/2009 bios0: Acer AO751h acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET MCFG TCPA TMOR APIC BOOT SLIC SSDT acpi0: wakeup devices PWRB(S3) PXS1(S5) PXS2(S3) USB1(S3) USB2(S3) EHC1(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 124MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (RP01) acpiprt2 at acpi0: bus 3 (RP02) acpiec0 at acpi0 acpicpu0 at acpi0: C1, PSS acpitz0 at acpi0: critical temperature 95 degC acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT1 not present acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PWRB acpibtn2 at acpi0: SLPB acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD01 acpivout1 at acpivideo0: DD02 acpivout2 at acpivideo0: DD04 acpivout3 at acpivideo0: DD05 acpivout4 at acpivideo0: DD04 acpivout5 at acpivideo0: DD05 bios0: ROM list: 0xc/0xe600! 0xce800/0x1000 0xe/0x1800! cpu0: Enhanced SpeedStep 1242 MHz: speeds: 1333, 1067, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel US15W Host rev 0x07 vga1 at pci0 dev 2 function 0 Intel US15W Video rev 0x07 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp at vga1 not configured azalia0 at pci0 dev 27 function 0 Intel SCH HD Audio rev 0x07: apic 2 int 22 (irq 10) azalia0: codecs: Realtek ALC272 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel SCH PCIE rev 0x07: apic 2 int 17 (irq 4) pci1 at ppb0 bus 2 re0 at pci1 dev 0 function 0 Realtek 8101E rev 0x02: RTL8102EL (0x2480), apic 2 int 16 (irq 7), address 00:23:8b:b3:c4:e7 rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ppb1 at pci0 dev 28 function 1 Intel SCH PCIE rev 0x07: apic 2 int 16 (irq 7) pci2 at ppb1 bus 3 mem address conflict 0xd000/0x1 ath0 at pci2 dev 0 function 0 Atheros AR5424 rev 0x01: apic 2 int 17 (irq 4) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2c:6f:ab:c0 uhci0 at pci0 dev 29 function 0 Intel SCH USB rev 0x07: apic 2 int 23 (irq 10) uhci1 at pci0 dev 29 function 1 Intel SCH USB rev 0x07: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2 Intel SCH USB rev 0x07: apic 2 int 18 (irq 3) ehci0 at pci0 dev 29 function 7 Intel SCH USB rev 0x07: apic 2 int 21 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel SCH LPC rev 0x07 pciide0 at pci0 dev 31 function 1 Intel SCH IDE rev 0x07: DMA, channel 0 wired to compatibility wd0 at pciide0 channel 0 drive 0: OCZ-VERTEX wd0: 1-sector PIO, LBA48, 61057MB, 125045424 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uvideo0 at uhub0 port 4 configuration 1 interface 0 SuYin WebCam rev 2.00/2.22 addr 2 video0 at uvideo0 umass0 at uhub0 port 7 configuration 1 interface 0 Generic USB2.0-CRW rev 2.00/58.88 addr 3 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: Generic-, Multi-Card, 1.00 SCSI0 0/direct removable sd0: 15193MB, 512 bytes/sec, 31116288 sec total softraid0 at root root on sd0a swap on sd0b dump on sd0b ath0: unable to reset hardware; hal status 200 ath0: unable to reset hardware; hal status 3692322188
Re: AR5424 diffirent errors before and after recompiling same kernel
ath0 at pci2 dev 0 function 0 Atheros AR5424 rev 0x01: apic 2 int 17 (irq 4) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2c:6f:ab:c0 First, why do you not think you have an AR5424 chipset? I ask because you've said so elsewhere. ath0: unable to reset hardware; hal status 200 ath0: unable to reset hardware; hal status 3692322188 Second, I wonder if you have that card marked as 'up after the recompile. I have the same card and when I have it marked as 'down' there is no problem. In fact, I wonder if compiling the kernal has anything to do with it, because I've done that too with no unable to reset hardware mesage. that message only occurs when I mark the card 'up' and try to use it. So, to fix the issue (if it is what I think it is), mark your card as 'down' (i.e., ifconfig ath0 down). It's not supported (yet), anyway. -Neal
Re: AR5424 diffirent errors before and after recompiling same kernel
First, why do you not think you have an AR5424 chipset? I ask because you've said so elsewhere. It is not AR5424. My question is simple Why is it different?, maybe What else can be different? So, to fix the issue ... mark your card as 'down' No, my issue isn't few lines in dmesg then I try to use hardware. But working hardware.
Re: AR5424 diffirent errors before and after recompiling same kernel
On Fri, Jan 28, 2011 at 6:48 AM, sergey.k...@gmail.com wrote: First, why do you not think you have an AR5424 chipset? I ask because you've said so elsewhere. It is not AR5424. Sorry, got confused by your dmesg, the subject to this thread, and the subject of the message you sent to dmesg@ . . . quote -- Forwarded message -- From: Sergey Kish sergey.k...@gmail.com Date: Wed, Jan 26, 2011 at 5:18 PM Subject: Acer Aspire One 751, Atheros AR5424 doesn't work To: dm...@openbsd.org /quote My question is simple Why is it different?, maybe What else can be different? So, to fix the issue ... mark your card as 'down' No, my issue isn't few lines in dmesg then I try to use hardware. But working hardware. You want to know why those lines are added to your dmesg, no? You want to know what the difference is. I'm suggesting that, after you did something (not necessarily the kernel compile), the difference is that your system is now trying to use a card that is unsupported.
Re: AR5424 diffirent errors before and after recompiling same kernel
But why? There was no changes except kernel! Indeed. Thanks.
Re: AR5424 diffirent errors before and after recompiling same kernel
I've found that Luis Henriques was able to use it year ago http://www.mail-archive.com/tech@openbsd.org/msg01613.html Short answer, it doesn't work. As you can see I've already red it. But here I'm not asking how to make AR5424 work. My point is different. No changes were applied, clean src.tar.gz and sys.tar.gz which I get from the same place as distribution CD... I've made no changes and wait for no changes. But behaviour changed! -ath0: unable to reset hardware: hal status 3 +ath0: unable to reset hardware; hal status 200 +ath0: unable to reset hardware; hal status 3692322168 Why? Does install binaries were made not from provided source?
Re: AR5424 diffirent errors before and after recompiling same kernel
But why? There was no changes except kernel! Indeed. Thanks. Jan, please read the message No changes were applied, clean src.tar.gz and sys.tar.gz which I get from the same place as distribution CD Once again. The only change I've made - recompiled kernel. Same release kernel. Same as (I thought) was used to make distribution. But it gives me other errors. And the only way I know to make other erros is different source code. Is it true?
Re: AR5424 diffirent errors before and after recompiling same kernel
On 2011-01-26, sergey.k...@gmail.com sergey.k...@gmail.com wrote: My Acer Aspire One 751 shipped with Atheros AR5424. It isn't supported, but was found during boot ath0 at pci2 dev 0 function 0 Atheros AR5424 rev 0x01: apic 2 int 17 (irq 4) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2c:6f:ab:c0 It fails to scan network: $ ifconfig ath0 scan debug ath0: unable to reset hardware: hal status 3 I've found that Luis Henriques was able to use it year ago http://www.mail-archive.com/tech@openbsd.org/msg01613.html No, that is for an AR5424 10.2 phy 6.1, this will not work with your AR5424 14.2 phy 7.0 Why? I've made no changes in kernel and I was waiting for same error (status 3)! Possibly the card is in a different state (cold boot vs warm boot)? Could be lots of possible reasons. I would suggest one of the mini-USB devices (or swapping the internal card, but the mini-USB ones are much cheaper+easier to buy).
Re: AR5424 diffirent errors before and after recompiling same kernel
Why? I've made no changes in kernel and I was waiting for same error (status 3)! Possibly the card is in a different state (cold boot vs warm boot)? Could be lots of possible reasons. No, same state. I've copied binary kernel bsd from mirror and it returns error 3 again. What's why I've posted here.
Re: AR5424 diffirent errors before and after recompiling same kernel
On Thu, Jan 27, 2011 at 3:17 PM, Sergey Kish sergey.k...@gmail.com wrote: ... No, same state. I've copied binary kernel bsd from mirror and it returns error 3 again. What's why I've posted here. No dmesg, don't state what kernel you downloaded (snapshot? 4.8?), and don't state what source branch you built from. You didn't read the How to create a problem report section of the FAQ I guess. To head off a question: SNAPSHOTS OFTEN CONTAIN CODE THAT HASN'T BEEN COMMITTED. Similarly, there are often commits between when a snapshot build started and when it was posted. Failing to include dmesg output means you don't really want an answer. Philip Guenther
AR5424 diffirent errors before and after recompiling same kernel
My Acer Aspire One 751 shipped with Atheros AR5424. It isn't supported, but was found during boot ath0 at pci2 dev 0 function 0 Atheros AR5424 rev 0x01: apic 2 int 17 (irq 4) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2c:6f:ab:c0 It fails to scan network: $ ifconfig ath0 scan debug ath0: unable to reset hardware: hal status 3 I've found that Luis Henriques was able to use it year ago http://www.mail-archive.com/tech@openbsd.org/msg01613.html So I've started from recompiling my kernel. No changes applied just src.tar.gz by ftp and recompiled kernel Running same command gives me other errors: $ ifconfig ath0 scan debug ath0: unable to reset hardware; hal status 200 ath0: unable to reset hardware; hal status 3692322168 Running again gives only second: $ ifconfig ath0 scan debug ath0: unable to reset hardware; hal status 3692322168 Why? I've made no changes in kernel and I was waiting for same error (status 3)! there was no changes except recompiling kernel. I've downloaded src.tar.gz and sys.tar.gz from ftp://ftp.spline.de/pub/OpenBSD/4.8/ which is official ftp mirror 12:33 sergeykish then I've used instructions from http://openbsd.org/faq/faq5.html 5.3.4 - Building the kernel 12:36 sergeykish yes, AR5424 isn't supported, but I've found http://www.mail-archive.com/tech@openbsd.org/msg01613.html 12:36 sergeykish and first step is recompiling kernel and checking same behaviour 12:37 sergeykish but for some reason it is changed, why? 12:37 sergeykish (I've recompiled kernel without patch)
AR5424 diffirent errors before and after recompiling same kernel
Hello My Acer Aspire One 751 shipped with Atheros AR5424. It isn't supported, but was found during boot ath0 at pci2 dev 0 function 0 Atheros AR5424 rev 0x01: apic 2 int 17 (irq 4) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2c:6f:ab:c0 It fails to scan network: $ ifconfig ath0 scan debug ath0: unable to reset hardware: hal status 3 I've found that Luis Henriques was able to use it year ago http://www.mail-archive.com/tech@openbsd.org/msg01613.html So I've started from recompiling my kernel. No changes were applied, clean src.tar.gz and sys.tar.gz which I get from the same place as distribution CD ftp://ftp.spline.de/pub/OpenBSD/4.8/ by FTP. I've used 5.3.4 - Building the kernel FAQ insturctions http://openbsd.org/faq/faq5.html # cd /usr/src/sys/arch/i386/conf # config GENERIC # cd ../compile/GENERIC # make clean make depend make [...lots of output...] # make install # reboot Now running same command gives me other errors: $ ifconfig ath0 scan debug ath0: unable to reset hardware; hal status 200 ath0: unable to reset hardware; hal status 3692322168 Running again gives only second: $ ifconfig ath0 scan debug ath0: unable to reset hardware; hal status 3692322168 But why? There was no changes except kernel!
Re: AR5424 diffirent errors before and after recompiling same kernel
On 01/26/2011 12:35 PM, sergey.k...@gmail.com wrote: My Acer Aspire One 751 shipped with Atheros AR5424. It isn't supported, but was found during boot ath0 at pci2 dev 0 function 0 Atheros AR5424 rev 0x01: apic 2 int 17 (irq 4) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2c:6f:ab:c0 It fails to scan network: $ ifconfig ath0 scan debug ath0: unable to reset hardware: hal status 3 I've found that Luis Henriques was able to use it year ago http://www.mail-archive.com/tech@openbsd.org/msg01613.html So I've started from recompiling my kernel. No changes applied just src.tar.gz by ftp and recompiled kernel Running same command gives me other errors: $ ifconfig ath0 scan debug ath0: unable to reset hardware; hal status 200 ath0: unable to reset hardware; hal status 3692322168 Running again gives only second: $ ifconfig ath0 scan debug ath0: unable to reset hardware; hal status 3692322168 Why? I've made no changes in kernel and I was waiting for same error (status 3)! there was no changes except recompiling kernel. I've downloaded src.tar.gz and sys.tar.gz from ftp://ftp.spline.de/pub/OpenBSD/4.8/ which is official ftp mirror 12:33 sergeykish then I've used instructions from http://openbsd.org/faq/faq5.html 5.3.4 - Building the kernel 12:36 sergeykish yes, AR5424 isn't supported, but I've found http://www.mail-archive.com/tech@openbsd.org/msg01613.html 12:36 sergeykish and first step is recompiling kernel and checking same behaviour 12:37 sergeykish but for some reason it is changed, why? 12:37 sergeykish (I've recompiled kernel without patch) Short answer, it doesn't work. http://marc.info/?l=openbsd-miscm=129274716428603w=2 which just points to: http://marc.info/?l=openbsd-miscm=126420221716157w=2 -- Hugo Osvaldo Barrera