Re: Asus EEEPC 900
Ok, thanks.
Has to be a BIOS thing then, because 4.8 dont recognize
any NICs at all, internal or USB. I kind of expected the
WLAN to be unusable, as it was on the 700.
Any ideas as to what BIOS settings to fiddle with?
On Mon, 28 Nov 2011 08:47:42 +0100, Christian StC wrote:
> On Fri, Nov 25, 2011 at 11:50 AM, Henrik Engmark wrote:
>> I was wondering if anyone out there is using the eee pc 900 to run
>> OpenBSD.
>
>> If anyone is using a successful combination of eee pc 900 and OpenBSD,
>> please
>> let me know.
>
> I use OpenBSD on my Eee PC 900, but I've had stability problems using
> 4.9 with the internal SSD and the Atheros AR5424 was unusable. I don't
> know if that changed with 5.0.
> lii and axe work fine.
>
> ---
> OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class)
> 901 MHz
> cpu0:
>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
> real mem = 2138107904 (2039MB)
> avail mem = 2093076480 (1996MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 03/03/09, BIOS32 rev. 0 @
> 0xf0010, SMBIOS rev. 2.5 @ 0xf06f0 (37 entries)
> bios0: vendor American Megatrends Inc. version "1006" date 03/03/2009
> bios0: ASUSTeK Computer INC. 900
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC OEMB MCFG
> acpi0: wakeup devices P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4)
> MC97(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 100MHz
> ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xe000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 5 (P0P3)
> acpiprt2 at acpi0: bus 3 (P0P5)
> acpiprt3 at acpi0: bus 1 (P0P6)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2
> acpitz0 at acpi0: critical temperature is 90 degC
> acpibat0 at acpi0: BAT0 model "900" serial type LION oem "ASUS"
> acpiac0 at acpi0: AC unit online
> acpiasus0 at acpi0
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibtn2 at acpi0: PWRB
> acpivideo0 at acpi0: VGA_
> bios0: ROM list: 0xc/0xf800!
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
> vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd000, size 0x1000
> inteldrm0 at vga1: apic 1 int 16
> drm0 at inteldrm0
> "Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek ALC662
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int
16
> pci1 at ppb0 bus 4
> ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int
17
> pci2 at ppb1 bus 3
> lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic
> 1 int 17, address 00:22:15:0f:f8:a6
> atphy0 at lii0 phy 1: F2 10/100 PHY, rev. 2
> ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int
18
> pci3 at ppb2 bus 1
> ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 18
> ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:b5:93:a1
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int
23
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int
19
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int
18
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int
16
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int
23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
> pci4 at ppb3 bus 5
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 1 drive 0:
> wd0: 1-sector PIO, LBA, 3847MB, 7880544 sectors
> wd1 at pciide0 channel 1 drive 1:
> wd1: 1-sector PIO, LBA, 30783MB, 63045360 sectors
> wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
> wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4
> ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1
> int 19
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
Re: Asus EEEPC 900
Am 25.11.11 17:15, schrieb Stuart Henderson: On 2011-11-25, Henrik Engmark wrote: I was wondering if anyone out there is using the eee pc 900 to run OpenBSD. I used an early 700 for many years as a firewall without problems, but that one died on me. Now when I try and replace it with my 900, with the same version OpenBSD (4.8), the installation does not find any network adapters at all. I also tried a usb nic which worked flawlessly on the 700, but with no success on the 900. When I attach the usb nic, it says something along the lines of usb not initialized. If anyone is using a successful combination of eee pc 900 and OpenBSD, please let me know. Could this be a BIOS settings issue? I can boot from usb cdrom without issues. Don't know about 900 but 5.0 and -current work fine on an Eee 901. Installed 5.0 on eee 900 last week. Onboard network adapter just worked. (can provide dmesg week)
Re: Asus EEEPC 900
On 2011-11-25, Henrik Engmark wrote: > I was wondering if anyone out there is using the eee pc 900 to run > OpenBSD. > > I used an early 700 for many years as a firewall without problems, > but that one died on me. > > Now when I try and replace it with my 900, with the same version OpenBSD > (4.8), > the installation does not find any network adapters at all. I also tried a > usb nic which worked flawlessly on the 700, but with no success on the > 900. > When I attach the usb nic, it says something along the lines of usb not > initialized. > > If anyone is using a successful combination of eee pc 900 and OpenBSD, > please > let me know. > > Could this be a BIOS settings issue? I can boot from usb cdrom without > issues. > > Don't know about 900 but 5.0 and -current work fine on an Eee 901.
Asus EEEPC 900
I was wondering if anyone out there is using the eee pc 900 to run OpenBSD. I used an early 700 for many years as a firewall without problems, but that one died on me. Now when I try and replace it with my 900, with the same version OpenBSD (4.8), the installation does not find any network adapters at all. I also tried a usb nic which worked flawlessly on the 700, but with no success on the 900. When I attach the usb nic, it says something along the lines of usb not initialized. If anyone is using a successful combination of eee pc 900 and OpenBSD, please let me know. Could this be a BIOS settings issue? I can boot from usb cdrom without issues. -- Henrik Engmark Systems Engineer TechTrade International AB Office: 08-754 09 90 P.O. Box 6044 SE-192 06 Sollentuna, Sweden
Re: Asus Eeepc 900
We looked at mbalmer's at the hackathon and we were relatively sure it
wasn't acpi related. If someone wants to loan/give me one for some time
I can try to figure out what is causing the hang.
Contact me off list if you are interested.
On Tue, Jul 01, 2008 at 10:28:53PM -0400, Curt Micol wrote:
> On Tue, Jul 1, 2008 at 2:31 PM, Eric Dillenseger
> <[EMAIL PROTECTED]> wrote:
> > I bought one of these and tried to install openbsd on it.
> > My first try was with 4.3 bsd booting over PXE.
> > As the ethernet wasn't recognized by the kernel I installed using a
> > usb thumb drive because I hadn't found how to boot from a usb device
> > at this moment.
> > Although the kernel claimed to recognize the atheros wireless card, I
> > couldn't use it (ath%d: ath_chan_set: unable to reset channel %u (%u
> > Mhz)).
> > Now I'm trying to boot bsd from a snapshot (as of yesterday 21:00
> > GMT+2) but the kernel hang on the sata driver apparently
> >
> > pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA,
> > channel 0 wired to compatibility, channel 1 wired to compatibility).
> >
> > Surprisingly, I tried and successfully booted bsd.mp a few times, but
> > it sometimes hang a little further on
> >
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16.
> >
> > And sometimes it inverts the SDCard slot and the usb disk so it's
> > kinda difficult to get a properly running box yet to test.
> >
> > I tried with bsd.rd and was able to install a working system and
> > again, booting bsd ain't working and bsd.mp often hangs on npx0 and
> > sometimes(rarely) boots successfully.
> >
> > Here's a dmesg:
> > OpenBSD 4.3-current (GENERIC.MP) #776: Sun Jun 29 11:34:39 MDT 2008
> >[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 901
> > MHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
> > real mem = 1064398848 (1015MB)
> > avail mem = 1020956672 (973MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 05/12/08, BIOS32 rev. 0 @
> > 0xf0010, SMBIOS rev. 2.5 @ 0xf06f0 (37 entries)
> > bios0: vendor American Megatrends Inc. version "0501" date 05/12/2008
> > bios0: ASUSTeK Computer INC. 900
> > apm0 at bios0: Power Management spec V1.2
> > apm0: AC on, battery charge unknown
> > acpi at bios0 function 0x0 not configured
> > pcibios0 at bios0: rev 3.0 @ 0xf/0x1
> > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7410/176 (9 entries)
> > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
> > pcibios0: PCI bus #5 is the last bus
> > bios0: ROM list: 0xc/0xf800!
> > mainbus0: Intel MP Specification (Version 1.4)
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 100MHz
> > mainbus0: bus 0 is type PCI
> > mainbus0: bus 1 is type PCI
> > mainbus0: bus 2 is type PCI
> > mainbus0: bus 3 is type PCI
> > mainbus0: bus 4 is type PCI
> > mainbus0: bus 5 is type PCI
> > mainbus0: bus 6 is type ISA
> > ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
> > vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > agp0 at vga1: aperture at 0xd000, size 0x1000
> > "Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
> > azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04:
> > apic 1 int 16 (irq 5)
> > azalia0: codec[s]: Realtek/0x0662
> > audio0 at azalia0
> > ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1
> > int 16 (irq 5)
> > pci_intr_map: bus 0 dev 28 func 0 pin 4; line 3
> > pci_intr_map: no MP mapping found
> > pci1 at ppb0 bus 4
> > ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1
> > int 17 (irq 11)
> > pci_intr_map: bus 0 dev 28 func 1 pin 4; line 3
> > pci_intr_map: no MP mapping found
> > pci2 at ppb1 bus 3
> > lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic
> > 1 int 17 (irq 11), address 00:1f:c6:8f:0d:ee
> > ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI
> > 0x001374, model 0x0002
> > ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1
> > int 18 (irq 10)
> > pci_intr_map: bus 0 dev 28 func 2 pin 4; line 3
> > pci_intr_map: no MP mapping found
> > pci3 at ppb2 bus 1
> > ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 18 (irq
> > 10)
> > ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:a7:3d:55
> > uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1
> > int 23 (irq 7)
> > uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1
> > int 19 (irq 3)
> > uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0
Re: Asus Eeepc 900
On Tue, Jul 1, 2008 at 2:31 PM, Eric Dillenseger
<[EMAIL PROTECTED]> wrote:
> I bought one of these and tried to install openbsd on it.
> My first try was with 4.3 bsd booting over PXE.
> As the ethernet wasn't recognized by the kernel I installed using a
> usb thumb drive because I hadn't found how to boot from a usb device
> at this moment.
> Although the kernel claimed to recognize the atheros wireless card, I
> couldn't use it (ath%d: ath_chan_set: unable to reset channel %u (%u
> Mhz)).
> Now I'm trying to boot bsd from a snapshot (as of yesterday 21:00
> GMT+2) but the kernel hang on the sata driver apparently
>
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility).
>
> Surprisingly, I tried and successfully booted bsd.mp a few times, but
> it sometimes hang a little further on
>
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16.
>
> And sometimes it inverts the SDCard slot and the usb disk so it's
> kinda difficult to get a properly running box yet to test.
>
> I tried with bsd.rd and was able to install a working system and
> again, booting bsd ain't working and bsd.mp often hangs on npx0 and
> sometimes(rarely) boots successfully.
>
> Here's a dmesg:
> OpenBSD 4.3-current (GENERIC.MP) #776: Sun Jun 29 11:34:39 MDT 2008
>[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 901
> MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
> real mem = 1064398848 (1015MB)
> avail mem = 1020956672 (973MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 05/12/08, BIOS32 rev. 0 @
> 0xf0010, SMBIOS rev. 2.5 @ 0xf06f0 (37 entries)
> bios0: vendor American Megatrends Inc. version "0501" date 05/12/2008
> bios0: ASUSTeK Computer INC. 900
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 3.0 @ 0xf/0x1
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7410/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
> pcibios0: PCI bus #5 is the last bus
> bios0: ROM list: 0xc/0xf800!
> mainbus0: Intel MP Specification (Version 1.4)
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 100MHz
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type PCI
> mainbus0: bus 4 is type PCI
> mainbus0: bus 5 is type PCI
> mainbus0: bus 6 is type ISA
> ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
> vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> agp0 at vga1: aperture at 0xd000, size 0x1000
> "Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04:
> apic 1 int 16 (irq 5)
> azalia0: codec[s]: Realtek/0x0662
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1
> int 16 (irq 5)
> pci_intr_map: bus 0 dev 28 func 0 pin 4; line 3
> pci_intr_map: no MP mapping found
> pci1 at ppb0 bus 4
> ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1
> int 17 (irq 11)
> pci_intr_map: bus 0 dev 28 func 1 pin 4; line 3
> pci_intr_map: no MP mapping found
> pci2 at ppb1 bus 3
> lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic
> 1 int 17 (irq 11), address 00:1f:c6:8f:0d:ee
> ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI
> 0x001374, model 0x0002
> ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1
> int 18 (irq 10)
> pci_intr_map: bus 0 dev 28 func 2 pin 4; line 3
> pci_intr_map: no MP mapping found
> pci3 at ppb2 bus 1
> ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 18 (irq
> 10)
> ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:a7:3d:55
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1
> int 23 (irq 7)
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1
> int 19 (irq 3)
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1
> int 18 (irq 10)
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1
> int 16 (irq 5)
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
> pci_intr_map: bus 0 dev 30 func 0 pin 1; line 11
> pci_intr_map: no MP mapping found
> pci_intr_map: bus 0 dev 30 func 0 pin 2; line 3
> pci_intr_map: no MP mapping found
> pci4 at ppb3 bus 5
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
> pciide0 at pci0 dev 31 function 2
Asus Eeepc 900
Hi,
I bought one of these and tried to install openbsd on it.
My first try was with 4.3 bsd booting over PXE.
As the ethernet wasn't recognized by the kernel I installed using a
usb thumb drive because I hadn't found how to boot from a usb device
at this moment.
Although the kernel claimed to recognize the atheros wireless card, I
couldn't use it (ath%d: ath_chan_set: unable to reset channel %u (%u
Mhz)).
Now I'm trying to boot bsd from a snapshot (as of yesterday 21:00
GMT+2) but the kernel hang on the sata driver apparently
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility).
Surprisingly, I tried and successfully booted bsd.mp a few times, but
it sometimes hang a little further on
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16.
And sometimes it inverts the SDCard slot and the usb disk so it's
kinda difficult to get a properly running box yet to test.
I tried with bsd.rd and was able to install a working system and
again, booting bsd ain't working and bsd.mp often hangs on npx0 and
sometimes(rarely) boots successfully.
Here's a dmesg:
OpenBSD 4.3-current (GENERIC.MP) #776: Sun Jun 29 11:34:39 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 901 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 1064398848 (1015MB)
avail mem = 1020956672 (973MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/12/08, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.5 @ 0xf06f0 (37 entries)
bios0: vendor American Megatrends Inc. version "0501" date 05/12/2008
bios0: ASUSTeK Computer INC. 900
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf/0x1
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7410/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc/0xf800!
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 100MHz
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd000, size 0x1000
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04:
apic 1 int 16 (irq 5)
azalia0: codec[s]: Realtek/0x0662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1
int 16 (irq 5)
pci_intr_map: bus 0 dev 28 func 0 pin 4; line 3
pci_intr_map: no MP mapping found
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1
int 17 (irq 11)
pci_intr_map: bus 0 dev 28 func 1 pin 4; line 3
pci_intr_map: no MP mapping found
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic
1 int 17 (irq 11), address 00:1f:c6:8f:0d:ee
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI
0x001374, model 0x0002
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1
int 18 (irq 10)
pci_intr_map: bus 0 dev 28 func 2 pin 4; line 3
pci_intr_map: no MP mapping found
pci3 at ppb2 bus 1
ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 18 (irq 10)
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:a7:3d:55
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1
int 23 (irq 7)
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1
int 19 (irq 3)
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1
int 18 (irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1
int 16 (irq 5)
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci_intr_map: bus 0 dev 30 func 0 pin 1; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 2; line 3
pci_intr_map: no MP mapping found
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0:
wd0: 1-sector PIO, LBA, 3847MB, 7880544 sectors
wd1 at pciide0 channel 1 drive 1:
wd1: 1-sector PIO, LBA, 7695MB, 15761088 sectors
wd0(pciide
