D-Link DWL-650 CardBus crash report
Hello all, I bought D-Link G650 (ath) - which is present in http://openbsd.org/i386.html list. When I put this card into my laptop (Toshiba Satellite S6157) and try boot -current (GENERIC) I get panic message at the end of boot. = panic message = # panic: pmap_remove_ptes: managed page without PG_PVLIST for 0xe6481000 Stopped at Debugger+0x4: leave = panic message = = show registers = ds 0x10 es 0xd210 kernel_text+0x10 fs 0xe6430058 gs 0xe643 edi 0xd06a2200 i386_cpuid_ecxfeatures+0x780 esi 0xe6436b08 ebp 0xe6436adc ebx 0 edx 0 ecx 0xd074fa64 kprintf_mutex eax 0x1 eip 0xd045ee6c Debugger+0x4 cs 0x8 eflags 0x202 esp 0xe6436adc ss 0xe6430010 Debugger+0x4: leave = show registers = I don't have serial console for trace and ps output, but I have Photo Camera :) = ps = ps output there http://eject.name/openbsd/ps.jpg = trace = trace output there http://eject.name/openbsd/ps.jpg Please give me know if I can help more in resolving this bug. -- Best regards, Evgeniy mailto:[EMAIL PROTECTED]
Re: D-Link DWL-650 CardBus crash report
Hello Miod, Thursday, September 13, 2007, 10:58:21 AM, you wrote: I bought D-Link G650 (ath) - which is present in http://openbsd.org/i386.html list. When I put this card into my laptop (Toshiba Satellite S6157) and try boot -current (GENERIC) I get panic message at the end of boot. [...] Please give me know if I can help more in resolving this bug. Could you also provide a complete dmesg as well? Miod # dmesg OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (GenuineIntel 686-class) 1.68 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR real mem = 2137157632 (2038MB) avail mem = 2058887168 (1963MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/22/06, BIOS32 rev. 0 @ 0xfd4a0, SMBIOS rev. 2.4 @ 0xdf010 (30 entries) bios0: vendor TOSHIBA version V3.30date 12/22/2006 bios0: TOSHIBA Satellite P105 pcibios0 at bios0: rev 2.1 @ 0xfd4a0/0xb60 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd70/224 (12 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82371FB ISA rev 0x00) pcibios0: PCI bus #11 is the last bus bios0: ROM list: 0xc/0xea00! 0xcf000/0x1800 0xdf000/0x1000! 0xe/0x1800! acpi at mainbus0 not configured cpu0 at mainbus0 cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a2806000a28 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1667 MHz (1340 mV): speeds: 1667, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 82945GM MCH rev 0x03 vga1 at pci0 dev 2 function 0 Intel 82945GM Video rev 0x03: aperture at 0xc000 , size 0x1000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) Intel 82945GM Video rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x02: irq 11 azalia0: host: High Definition Audio rev. 1.0 azalia0: codec: Conexant/0x5045 (rev. 1.0), HDA version 1.0 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x02 pci1 at ppb0 bus 2 ppb1 at pci0 dev 28 function 1 Intel 82801GB PCIE rev 0x02 pci2 at ppb1 bus 3 wpi0 at pci2 dev 0 function 0 Intel PRO/Wireless 3945ABG rev 0x02: irq 11, MoW 1, address 00:19:d2:22:62:fd ppb2 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x02 pci3 at ppb2 bus 4 uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x02: irq 7 uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x02: irq 11 uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x02: irq 11 uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x02: irq 11 ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x02: irq 7 ehci0: timed out waiting for BIOS usb0 at ehci0: USB revision 2.0 uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1 ppb3 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xe2 pci4 at ppb3 bus 10 cbb0 at pci4 dev 4 function 0 TI PCIXX12 CardBus rev 0x00: irq 11 TI PCIXX12 FireWire rev 0x00 at pci4 dev 4 function 1 not configured TI PCIXX12 Multimedia Card Reader rev 0x00 at pci4 dev 4 function 2 not config ured sdhc0 at pci4 dev 4 function 3 TI PCIXX12 Secure Data rev 0x00: irq 11 sdmmc0 at sdhc0 fxp0 at pci4 dev 8 function 0 Intel PRO/100 VM rev 0x02, i82562: irq 11, addre ss 00:16:36:d1:9e:4e inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 11 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 Intel 82801GBM LPC rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 Intel 82801GBM SATA rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: FUJITSU MHV2200BT PL wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: MATSHITA, DVD-RAM UJ-850S, 1.10 SCSI0 5/cdrom re movable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 Intel 82801GB SMBus rev 0x02: irq 11 iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at
Re: D-Link DWL-650 CardBus crash report
Hello Evgeniy, Thursday, September 13, 2007, 10:41:53 AM, you wrote: Hello all, I bought D-Link G650 (ath) - which is present in http://openbsd.org/i386.html list. When I put this card into my laptop (Toshiba Satellite S6157) and try boot -current (GENERIC) I get panic message at the end of boot. = panic message = # panic: pmap_remove_ptes: managed page without PG_PVLIST for 0xe6481000 Stopped at Debugger+0x4: leave = panic message = = show registers = ds 0x10 es 0xd210 kernel_text+0x10 fs 0xe6430058 gs 0xe643 edi 0xd06a2200 i386_cpuid_ecxfeatures+0x780 esi 0xe6436b08 ebp 0xe6436adc ebx 0 edx 0 ecx 0xd074fa64 kprintf_mutex eax 0x1 eip 0xd045ee6c Debugger+0x4 cs 0x8 eflags 0x202 esp 0xe6436adc ss 0xe6430010 Debugger+0x4: leave = show registers = I don't have serial console for trace and ps output, but I have Photo Camera :) = ps = ps output there http://eject.name/openbsd/ps.jpg = trace = trace output there http://eject.name/openbsd/ps.jpg sorry, trace output there http://eject.name/openbsd/trace.jpg Please give me know if I can help more in resolving this bug. -- Best regards, Evgeniymailto:[EMAIL PROTECTED]
Re: D-Link DWL-650 CardBus crash report
Hi, I got a panic recently, too, after trying to insert my CF card into the cf reader, which seems to be connected to pcmcia. As we discussed on IRC it seems to have something in common. Maybe it's the same reason? The trace seems identical. I submitted a bug report... maybe somebody can see some similarities or use this additional information for more hints how to try to fix it: http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yesnumbers=5577 Regards, Julian On 13:00 Thu 13 Sep , Evgeniy Sudyr wrote: Hello Evgeniy, Thursday, September 13, 2007, 10:41:53 AM, you wrote: Hello all, I bought D-Link G650 (ath) - which is present in http://openbsd.org/i386.html list. When I put this card into my laptop (Toshiba Satellite S6157) and try boot -current (GENERIC) I get panic message at the end of boot. = panic message = # panic: pmap_remove_ptes: managed page without PG_PVLIST for 0xe6481000 Stopped at Debugger+0x4: leave = panic message = = show registers = ds 0x10 es 0xd210 kernel_text+0x10 fs 0xe6430058 gs 0xe643 edi 0xd06a2200 i386_cpuid_ecxfeatures+0x780 esi 0xe6436b08 ebp 0xe6436adc ebx 0 edx 0 ecx 0xd074fa64 kprintf_mutex eax 0x1 eip 0xd045ee6c Debugger+0x4 cs 0x8 eflags 0x202 esp 0xe6436adc ss 0xe6430010 Debugger+0x4: leave = show registers = I don't have serial console for trace and ps output, but I have Photo Camera :) = ps = ps output there http://eject.name/openbsd/ps.jpg = trace = trace output there http://eject.name/openbsd/ps.jpg sorry, trace output there http://eject.name/openbsd/trace.jpg Please give me know if I can help more in resolving this bug. -- Best regards, Evgeniymailto:[EMAIL PROTECTED]
Re: D-Link DWL-650 CardBus crash report
Hello, I have a similar, if not identical, pcmcia problem on my lenovo thinkpad x60s: http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yesnumbers=5239 kind regards, - - Didier -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Julian Leyh Sent: 13 September 2007 14:59 To: misc@openbsd.org Subject: Re: D-Link DWL-650 CardBus crash report Hi, I got a panic recently, too, after trying to insert my CF card into the cf reader, which seems to be connected to pcmcia. As we discussed on IRC it seems to have something in common. Maybe it's the same reason? The trace seems identical. I submitted a bug report... maybe somebody can see some similarities or use this additional information for more hints how to try to fix it: http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yesnumbers=5577 Regards, Julian On 13:00 Thu 13 Sep , Evgeniy Sudyr wrote: Hello Evgeniy, Thursday, September 13, 2007, 10:41:53 AM, you wrote: Hello all, I bought D-Link G650 (ath) - which is present in http://openbsd.org/i386.html list. When I put this card into my laptop (Toshiba Satellite S6157) and try boot -current (GENERIC) I get panic message at the end of boot. = panic message = # panic: pmap_remove_ptes: managed page without PG_PVLIST for 0xe6481000 Stopped at Debugger+0x4: leave = panic message = = show registers = ds 0x10 es 0xd210 kernel_text+0x10 fs 0xe6430058 gs 0xe643 edi 0xd06a2200 i386_cpuid_ecxfeatures+0x780 esi 0xe6436b08 ebp 0xe6436adc ebx 0 edx 0 ecx 0xd074fa64 kprintf_mutex eax 0x1 eip 0xd045ee6c Debugger+0x4 cs 0x8 eflags 0x202 esp 0xe6436adc ss 0xe6430010 Debugger+0x4: leave = show registers = I don't have serial console for trace and ps output, but I have Photo Camera :) = ps = ps output there http://eject.name/openbsd/ps.jpg = trace = trace output there http://eject.name/openbsd/ps.jpg sorry, trace output there http://eject.name/openbsd/trace.jpg Please give me know if I can help more in resolving this bug. -- Best regards, Evgeniymailto:[EMAIL PROTECTED]
