Re: HP ProLiant DL320 v. Sun Fire V125
Hi, sorry for the late response, the mail just got marked as junk :( KM enabling acpi How exactly do you do it? Mine acpi-related lines are its already in the default kernel, not sure if its enabled by default. # config -ef /bsd.mp ... ukc enable acpi 414 acpi0 enabled KM enabling write cache for wd0 in the system with: KM # atactl wd0 writecacheenable Where do you put these command? For now I just ran it manually (and tested the result). I think it makes sense to activate the write cache before checking (and possibly recovering) RAIDframe devices, but rc.secure and rc.local are being called after that. Is it a good idea to put these atactl commands to /etc/rc right before #Configure ccd devices line? i ran it manually as well, and i guess you're right, even though i would not touch /etc/rc, since its part of the core system and i guess its not supposed to be changed by the user dunno if there is a sysctl and or other way to enable it at boot time, maybe also config -ef /bsd? KM Compaq iLO rev 0x03 at pci6 dev 4 function 0 not configured KM Compaq iLO rev 0x03 at pci6 dev 4 function 2 not configured KM uhci4 at pci6 dev 4 function 4 Hewlett-Packard USB rev 0x00: apic 8 int 23 (irq 11) KM Hewlett-Packard IPMI rev 0x00 at pci6 dev 4 function 6 not configured KM usb1 at uhci4: USB revision 1.0 KM uhub1 at usb1 Hewlett-Packard UHCI root hub rev 1.00/1.00 addr 1 Did you do something special about uhci*? Mine is giving errors on two computers already. Sometimes it even crashes to ddb: maybe try to disable it in the kernel config # config -ef /bsd.mp ... ukc disable uhci 139 uhci* disabled Also, does iLO 2 Remote Console (a Java one) work for you? we dont use it. sorry. Best Kai
Re: HP ProLiant DL320 v. Sun Fire V125
Hello Kai, Thank you very much for the reply. It's helpful. Wednesday, October 31, 2007, 8:57:53 AM, you wrote: KM We run quite fine here with 4.2-current from today on a DL320G5, after: KM enabling write cache in the HP Bios ! It looks like that BIOS write cache settings don't change anything (atactl does it). KM enabling amd64 bsd.mp Your CPU is Xeon, mine is Pentium D. Don't think amd64 will work for me. KM enabling acpi How exactly do you do it? Mine acpi-related lines are #option ACPIVERBOSE #option ACPI_ENABLE acpi0 at mainbus? acpitimer* at acpi? #acpihpet* at acpi? #acpiac*at acpi? #acpibat* at acpi? #acpibtn* at acpi? acpicpu*at acpi? #acpidock* at acpi? acpiec* at acpi? acpiprt*at acpi? acpitz* at acpi? Do I need to uncomment options or they are active by default anyway? Is there any documents about it? KM enabling write cache for wd0 in the system with: KM # atactl wd0 writecacheenable Where do you put these command? For now I just ran it manually (and tested the result). I think it makes sense to activate the write cache before checking (and possibly recovering) RAIDframe devices, but rc.secure and rc.local are being called after that. Is it a good idea to put these atactl commands to /etc/rc right before #Configure ccd devices line? KM Before we had horrible 2MByte write speed, now we have 67MByte. I'm getting an about 16 times speed increase on copying a 1.2 gig file. Is there any performance tests for the OpenBSD, BTW? KM The bge interfaces also seem to run fine. Have you tried to boot with a network cable unplugged and than plug it? My bge* (on two computers so far) detects a media of 10 megabit in that case (ifconfig down/up makes it to detect the right media - 100 or 1000 megabit). em* devices don't have that (minor?) bug. KM Compaq iLO rev 0x03 at pci6 dev 4 function 0 not configured KM Compaq iLO rev 0x03 at pci6 dev 4 function 2 not configured KM uhci4 at pci6 dev 4 function 4 Hewlett-Packard USB rev 0x00: apic 8 int 23 (irq 11) KM Hewlett-Packard IPMI rev 0x00 at pci6 dev 4 function 6 not configured KM usb1 at uhci4: USB revision 1.0 KM uhub1 at usb1 Hewlett-Packard UHCI root hub rev 1.00/1.00 addr 1 Did you do something special about uhci*? Mine is giving errors on two computers already. Sometimes it even crashes to ddb: uhci4 at pci7 dev 4 function 4 Hewlett-Packard USB rev 0x00: irq 11 uhci4: cannot stop Hewlett-Packard IPMI rev 0x00 at pci7 dev 4 function 6 not configured Stopped at uvm_pglistalloc_simple+0xc5:addl$0x1000,0xffec(%ebp) uvm_pglistalloc_simple(1,100,3fe64000,d08c7af0,d07ac860) at uvm_pglistalloc_simple+0xc5 uvm_pglistalloc(1000,100,3fe64000,1000,0,d08c7af0,1,0) at uvm_pglistalloc+0x35c _bus_dmamem_alloc_range(d075d900,1000,10,0,d18f6b4c) at _bus_dmamem_alloc_range+0x52 _bus_dmamem_alloc(d075d900,1000,10,0,d18f6b4c,1,d18f6b54,1) at _bus_dmamem_alloc+0x30 usb_block_allocmem(d075d900,1000,10,d08c7bd0) at usb_block_allocmem+0xa1 usb_allocmem(d191f000,1000,10,d08c7bd0) at usb_allocmem+0x39 uhci_alloc_sqh(d191f000,1000,1000,d191f274,d18f7234) at uhci_alloc_sqh+0x4a uhci_init(d191f000,4,d078ebe0,80072000) at uhci_init+0x130 uhci_pci_attach_deferred(d191f000,8007f800,c,0,20) at uhci_pci_attach_deferred+0x24 config_process_deferred_children(d18f7180,0,0,d18f7200,20) at config_process_deferred_children+0x59 ddb c usb1 at uhci4: USB revision 1.0 uhub1 at usb1: Hewlett-Packard UHCI root hub, rev 1.00/1.00, addr 1 Also, does iLO 2 Remote Console (a Java one) work for you? -- Best regards, Borismailto:[EMAIL PROTECTED]
Re: HP ProLiant DL320 v. Sun Fire V125
Hi, We run quite fine here with 4.2-current from today on a DL320G5, after: enabling write cache in the HP Bios ! enabling amd64 bsd.mp enabling acpi enabling write cache for wd0 in the system with: # atactl wd0 writecacheenable Before we had horrible 2MByte write speed, now we have 67MByte. The bge interfaces also seem to run fine. cheers Kai manam:~ # dmesg OpenBSD 4.2-current (GENERIC.MP) #1436: Mon Oct 29 23:01:38 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2145415168 (2046MB) avail mem = 2071965696 (1975MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xee000 (47 entries) bios0: vendor HP version W04 date 03/10/2007 bios0: HP ProLiant DL320 G5 acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP SPCR MCFG HPET SPMI APIC acpitimer at acpi0 not configured acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz, 1866.98 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 266MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz, 1866.74 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 8 pa 0xfec0, version 20, 24 pins acpiprt0 at acpi0: bus 1 (IP2P) acpiprt1 at acpi0: bus 4 (PCXS) acpiprt2 at acpi0: bus 3 (PCXA) acpiprt3 at acpi0: bus 2 (ICHE) acpiprt3: no apic found for irq 47 acpiprt4 at acpi0: bus 7 (IPE4) acpiprt5 at acpi0: bus 10 (PTA0) acpiprt6 at acpi0: bus 0 (PCI0) acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpitz at acpi0 not configured ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 Intel E7230 MCH rev 0xc0 ppb0 at pci0 dev 1 function 0 Intel E7230 PCIE rev 0xc0 pci1 at ppb0 bus 10 ppb1 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xb5 pci3 at ppb2 bus 3 bge0 at pci3 dev 4 function 0 Broadcom BCM5714 rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 16 (irq 11), address 00:1b:78:7a:c8:68 brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0 bge1 at pci3 dev 4 function 1 Broadcom BCM5714 rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 17 (irq 10), address 00:1b:78:7a:c8:69 brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0 ppb3 at pci3 dev 8 function 0 ServerWorks HT-1000 PCIX rev 0xb4 pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01 pci5 at ppb4 bus 7 ppb5 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01 ppb5: not configured by system firmware uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic 8 int 21 (irq 5) uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: apic 8 int 21 (irq 5) uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: apic 8 int 21 (irq 5) uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x01: apic 8 int 21 (irq 5) ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: apic 8 int 21 (irq 5) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb6 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xe1 pci6 at ppb6 bus 1 vga1 at pci6 dev 3 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) Compaq iLO rev 0x03 at pci6 dev 4 function 0 not configured Compaq iLO rev 0x03 at pci6 dev 4 function 2 not configured uhci4 at pci6 dev 4 function 4 Hewlett-Packard USB rev 0x00: apic 8 int 23 (irq 11) Hewlett-Packard IPMI rev 0x00 at pci6 dev 4 function 6 not configured usb1 at uhci4: USB revision 1.0 uhub1 at usb1 Hewlett-Packard UHCI root hub rev 1.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01 pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: TEAC, DV-28E-N, C.6B SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 Intel 82801GB SATA rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 8 int 20 (irq 7) for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: ST3808110AS wd0: 16-sector
Re: HP ProLiant DL320 v. Sun Fire V125
Hello evo, Wednesday, October 24, 2007, 12:51:13 AM, you wrote: e I'm choosing firewall/proxy/mail-gateway hardware running (of course) e OpenBSD for medium office and my shortlist is: e (a) HP ProLiant DL320 and (b) Sun Fire V125 I'm upgrading my servers/firewalls to HP ProLiant DL320 G5, and the experience... isn't easy. First of all you need to allow acpi in an MP kernel, otherwise it's slow and unstable (it's disabled by default and not really documented). Then you have couple more issues I couldn't resolve yet: Fists - uhci (uhci4 in my case) giving an error during boot and shutdown: OpenBSD 4.2-stable (GENERIC) #1: Thu Oct 18 12:35:10 CDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) D CPU 3.00GHz (GenuineIntel 686-class) 3.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR real mem = 1071640576 (1021MB) avail mem = 1028595712 (980MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf, SMBIOS rev. 2.3 @ 0xee000 (47 entries) bios0: vendor HP version W04 date 04/06/2007 bios0: HP ProLiant DL320 G5 pcibios0 at bios0: rev 3.0 @ 0xf/0x2000 pcibios0: PCI BIOS has 7 Interrupt Routing table entries pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801GB LPC rev 0x00) pcibios0: PCI bus #7 is the last bus bios0: ROM list: 0xc/0xb000 0xcc400/0x1000 0xcd400/0x1000 0xce400/0x3400! 0xe6000/0x2000! acpi at mainbus0 not configured ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel E7230 MCH rev 0xc0 ppb0 at pci0 dev 1 function 0 Intel E7230 PCIE rev 0xc0 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xb5 pci3 at ppb2 bus 3 bge0 at pci3 dev 4 function 0 Broadcom BCM5714 rev 0xa3, BCM5715 A3 (0x9003): irq 11, address 00:1b:78:07:c9:9a brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0 bge1 at pci3 dev 4 function 1 Broadcom BCM5714 rev 0xa3, BCM5715 A3 (0x9003): irq 10, address 00:1b:78:07:c9:9b brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0 ppb3 at pci3 dev 8 function 0 ServerWorks HT-1000 PCIX rev 0xb4 pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01 pci5 at ppb4 bus 5 em0 at pci5 dev 0 function 0 Intel PRO/1000 PT (82571EB) rev 0x06: irq 11, address 00:1b:78:57:58:e0 em1 at pci5 dev 0 function 1 Intel PRO/1000 PT (82571EB) rev 0x06: irq 10, address 00:1b:78:57:58:e1 ppb5 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01 pci6 at ppb5 bus 6 uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: irq 5 uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: irq 5 uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: irq 5 uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x01: irq 5 ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: irq 5 usb0 at ehci0: USB revision 2.0 uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1 ppb6 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xe1 pci7 at ppb6 bus 7 vga1 at pci7 dev 3 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) Compaq iLO rev 0x03 at pci7 dev 4 function 0 not configured Compaq iLO rev 0x03 at pci7 dev 4 function 2 not configured uhci4 at pci7 dev 4 function 4 Hewlett-Packard USB rev 0x00: irq 11 uhci4: cannot stop Hewlett-Packard IPMI rev 0x00 at pci7 dev 4 function 6 not configured usb1 at uhci4: USB revision 1.0 uhub1 at usb1: Hewlett-Packard UHCI root hub, rev 1.00/1.00, addr 1 ichpcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 Intel 82801GB SATA rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 7 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: FB160C4081 wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5: Intel UHCI root hub, rev 1.00/1.00, addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard,