hello misc@ I have the results of a dmesg below
on -current I could boot GENERIC i386 from a snapshot build that was dated 3-10-2007 however when I did a fresh install of -current based on the snapshot I just downloaded from ftp.openbsd.org, I can not boot GENERIC i386, however GENERIC.MP w/ acpi enabled works Maybe there are bigger changes at work here and this is supposed to be broken. Thank you OpenBSD developers for all your great work. Sam Fourman Jr. 8 ports with 8 removable, self powered ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd4 pci5 at ppb4 bus 1 malo0 at pci5 dev 0 function 0 "Marvell Libertas 88W8310" rev 0x07: irq 6, address 00:00:00:00:00:00 vendor "TI", unknown product 0x8025 (class serial bus subclass Firewire, rev 0x01) at pci5 dev 3 function 0 not configured pciide0 at pci5 dev 4 function 0 "ITExpress IT8212F" rev 0x13: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using irq 11 for native-PCI interrupt pciide1 at pci5 dev 5 function 0 "CMD Technology SiI3114 SATA" rev 0x02: DMA pciide1: using irq 11 for native-PCI interrupt ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x04: PM disabled pciide2 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide2 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DW-D22A, BYS2> SCSI0 5/cdrom removable atapiscsi1 at pciide2 channel 0 drive 1 scsibus1 at atapiscsi1: 2 targets cd1 at scsibus1 targ 0 lun 0: <SONY, CD-RW CRX320E, NYK5> SCSI0 5/cdrom removable cd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 4 cd1(pciide2:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide2: channel 1 disabled (no drives) pciide3 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x04: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide3: using irq 3 for native-PCI interrupt wd0 at pciide3 channel 0 drive 0: <HDS722580VLSA80> wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors wd0(pciide3:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1 at pciide3 channel 1 drive 0: <HDS722580VLSA80> wd1: 16-sector PIO, LBA48, 78533MB, 160836480 sectors wd1(pciide3:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: irq 3 iic0 at ichiic0 lm1 at iic0 addr 0x2f: W83791SD iic0: addr 0x4e 05=80 06=0f 0a=ff usb1 at uhci0: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered usb2 at uhci1: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered usb3 at uhci2: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered OpenBSD 4.1-current (GENERIC.MP) #1238: Wed Mar 21 17:32:34 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.22 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR real mem = 2146725888 (2096412K) avail mem = 1951940608 (1906192K) using 4278 buffers containing 107458560 bytes (104940K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 03/23/05, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xf04d0 (79 entries) bios0: ASUSTeK Computer INC. P5AD2-E-Premium apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8160/352 (20 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00) pcibios0: PCI bus #5 is the last bus bios0: ROM list: 0xc0000/0xee00! 0xcf000/0x4800 acpi at mainbus0 not configured mainbus0: Intel MP Specification (Version 1.4) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200 MHz mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type PCI mainbus0: bus 3 is type PCI mainbus0: bus 4 is type PCI mainbus0: bus 5 is type PCI mainbus0: bus 6 is type ISA ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82925X MCH Host" rev 0x0e ppb0 at pci0 dev 1 function 0 "Intel 82925X PCIE" rev 0x0e pci1 at ppb0 bus 5 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6800 GT" rev 0xa2 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: apic 2 int 16 (irq 10) azalia0: host: High Definition Audio rev. 1.0 azalia0: codec: CMedia CMI9880 (rev. 0.2), HDA version 0.9 azalia0: /usr/src/sys/dev/pci/azalia.c/1159 invalid PCM format: 0x00000000 delete_encodings... ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04 pci2 at ppb1 bus 4 ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04 pci3 at ppb2 bus 3 mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Yukon-2 EC rev. A2 (0x1): apic 2 int 17 (irq 11) msk0 at mskc0 port A, address 00:11:d8:55:58:e8 eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 ppb3 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04 pci4 at ppb3 bus 2 mskc1 at pci4 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Yukon-2 EC rev. A2 (0x1): apic 2 int 18 (irq 5) msk1 at mskc1 port A, address 00:11:d8:55:55:64 eephy1 at msk1 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 2 int 23 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 2 int 19 (irq 3) uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 2 int 18 (irq 5) uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 2 int 16 (irq 10) ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 2 int 23 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd4 pci5 at ppb4 bus 1 malo0 at pci5 dev 0 function 0 "Marvell Libertas 88W8310" rev 0x07: apic 2 int 20 (irq 6), address 00:00:00:00:00:00 vendor "TI", unknown product 0x8025 (class serial bus subclass Firewire, rev 0x01) at pci5 dev 3 function 0 not configured pciide0 at pci5 dev 4 function 0 "ITExpress IT8212F" rev 0x13: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 2 int 23 (irq 11) for native-PCI interrupt pciide1 at pci5 dev 5 function 0 "CMD Technology SiI3114 SATA" rev 0x02: DMA pciide1: using apic 2 int 22 (irq 11) for native-PCI interrupt ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x04: PM disabled pciide2 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide2 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DW-D22A, BYS2> SCSI0 5/cdrom removable atapiscsi1 at pciide2 channel 0 drive 1 scsibus1 at atapiscsi1: 2 targets cd1 at scsibus1 targ 0 lun 0: <SONY, CD-RW CRX320E, NYK5> SCSI0 5/cdrom removable cd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 4 cd1(pciide2:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide2: channel 1 disabled (no drives) pciide3 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x04: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide3: using apic 2 int 19 (irq 3) for native-PCI interrupt wd0 at pciide3 channel 0 drive 0: <HDS722580VLSA80> wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors wd0(pciide3:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1 at pciide3 channel 1 drive 0: <HDS722580VLSA80> wd1: 16-sector PIO, LBA48, 78533MB, 160836480 sectors wd1(pciide3:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 2 int 19 (irq 0) iic0 at ichiic0 lm1 at iic0 addr 0x2f: W83791SD iic0: addr 0x4e 05=80 06=0f 0a=ff usb1 at uhci0: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered usb2 at uhci1: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered usb3 at uhci2: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered usb4 at uhci3: USB revision 1.0 uhub4 at usb4 uhub4: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0x88) npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pctr: user-level cycle counter enabled dkcsum: wd0 matches BIOS drive 0x80 dkcsum: wd1 matches BIOS drive 0x81 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 syncing disks... OpenBSD 4.1-current (GENERIC.MP) #1238: Wed Mar 21 17:32:34 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.22 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR real mem = 2146725888 (2096412K) avail mem = 1951940608 (1906192K) using 4278 buffers containing 107458560 bytes (104940K) of memory User Kernel Config UKC> enable acpi 389 acpi0 enabled UKC> quit Continuing... mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 03/23/05, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xf04d0 (79 entries) bios0: ASUSTeK Computer INC. P5AD2-E-Premium apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8160/352 (20 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00) pcibios0: PCI bus #5 is the last bus bios0: ROM list: 0xc0000/0xee00! 0xcf000/0x4800 acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP APIC OEMB MCFG acpitimer at acpi0 not configured acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.22 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 5 (P0P1) acpiprt2 at acpi0: bus 1 (P0P3) acpiprt3 at acpi0: bus 4 (P0P4) acpiprt4 at acpi0: bus 3 (P0P5) acpiprt5 at acpi0: bus 2 (P0P6) acpiprt6 at acpi0: bus 0 (P0P7) acpibtn at acpi0 not configured acpibtn at acpi0 not configured pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82925X MCH Host" rev 0x0e ppb0 at pci0 dev 1 function 0 "Intel 82925X PCIE" rev 0x0e pci1 at ppb0 bus 5 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6800 GT" rev 0xa2 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: apic 2 int 16 (irq 10) azalia0: host: High Definition Audio rev. 1.0 azalia0: codec: CMedia CMI9880 (rev. 0.2), HDA version 0.9 azalia0: /usr/src/sys/dev/pci/azalia.c/1159 invalid PCM format: 0x00000000 delete_encodings... ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04 pci2 at ppb1 bus 4 ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04 pci3 at ppb2 bus 3 mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Yukon-2 EC rev. A2 (0x1): apic 2 int 17 (irq 11) msk0 at mskc0 port A, address 00:11:d8:55:58:e8 eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 ppb3 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04 pci4 at ppb3 bus 2 mskc1 at pci4 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Yukon-2 EC rev. A2 (0x1): apic 2 int 18 (irq 5) msk1 at mskc1 port A, address 00:11:d8:55:55:64 eephy1 at msk1 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 2 int 23 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 2 int 19 (irq 3) uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 2 int 18 (irq 5) uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 2 int 16 (irq 10) ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 2 int 23 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd4 pci5 at ppb4 bus 1 malo0 at pci5 dev 0 function 0 "Marvell Libertas 88W8310" rev 0x07: apic 2 int 20 (irq 6), address 00:00:00:00:00:00 vendor "TI", unknown product 0x8025 (class serial bus subclass Firewire, rev 0x01) at pci5 dev 3 function 0 not configured pciide0 at pci5 dev 4 function 0 "ITExpress IT8212F" rev 0x13: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 2 int 23 (irq 11) for native-PCI interrupt pciide1 at pci5 dev 5 function 0 "CMD Technology SiI3114 SATA" rev 0x02: DMA pciide1: using apic 2 int 22 (irq 11) for native-PCI interrupt ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x04: PM disabled pciide2 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide2 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DW-D22A, BYS2> SCSI0 5/cdrom removable atapiscsi1 at pciide2 channel 0 drive 1 scsibus1 at atapiscsi1: 2 targets cd1 at scsibus1 targ 0 lun 0: <SONY, CD-RW CRX320E, NYK5> SCSI0 5/cdrom removable cd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 4 cd1(pciide2:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide2: channel 1 disabled (no drives) pciide3 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x04: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide3: using apic 2 int 19 (irq 3) for native-PCI interrupt wd0 at pciide3 channel 0 drive 0: <HDS722580VLSA80> wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors wd0(pciide3:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1 at pciide3 channel 1 drive 0: <HDS722580VLSA80> wd1: 16-sector PIO, LBA48, 78533MB, 160836480 sectors wd1(pciide3:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 2 int 19 (irq 0) iic0 at ichiic0 lm1 at iic0 addr 0x2f: W83791SD iic0: addr 0x4e 05=80 06=0f 0a=ff usb1 at uhci0: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered usb2 at uhci1: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered usb3 at uhci2: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered usb4 at uhci3: USB revision 1.0 uhub4 at usb4 uhub4: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0x88) npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pctr: user-level cycle counter enabled apm0: disconnected dkcsum: wd0 matches BIOS drive 0x80 dkcsum: wd1 matches BIOS drive 0x81 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302