Re: Intel DQ35MP

2008-01-11 Thread Michał Koc 
Hi,

Using drive 0, partition 3.
Loading...
probing: pc0 apm mem[635K 3573M 16K a20=on]
disk: hd0+
  OpenBSD/i386 BOOT 3.01
boot machine memory
Region 0: type 1 at 0x1000 for 635KB
Region 1: type 2 at 0x9fc00 for 1KB
Region 2: type 2 at 0xe for 128KB
Region 3: type 1 at 0x10 for 3659244KB
Region 4: type 4 at 0xdf67b000 for 440KB
Region 5: type 1 at 0xdf6e9000 for 16KB
Region 6: type 3 at 0xdf6ed000 for 72KB
Region 7: type 1 at 0xdf6ff000 for 4KB
Low ram: 639KB  Hight ram: 3659260KB
Total free memory: 3659899KB
boot

this comes from Intel D945GTP which also shows this problem.

regards
M.K.

[EMAIL PROTECTED] pisze:
 In gmane.os.openbsd.misc, you wrote:
   
  I had same problem with DQ965GF, DSDT was overwritten by msgbuf.
  As a quick hack I changed msgbuf size and it solved my problem. I
  haven't had time to debug it further.

  Index: sys/arch/i386/include/param.h
  ===
  RCS file: /OpenBSD/src/sys/arch/i386/include/param.h,v
  retrieving revision 1.42
  diff -u -3 -p -r1.42 param.h
  --- sys/arch/i386/include/param.h   1 Oct 2007 12:10:55 -   1.42
  +++ sys/arch/i386/include/param.h   10 Jan 2008 19:13:18 -
  @@ -97,7 +97,7 @@
   #defineUSPACE_ALIGN(0) /* u-area alignment 0-none 
 */
   
   #ifndef MSGBUFSIZE
  -#define MSGBUFSIZE 4*NBPG  /* default message buffer size */
  +#define MSGBUFSIZE 2*NBPG  /* default message buffer size */
   #endif
 

 Please send me the output of 'machine memory' at the boot prompt
 for this machine.  I think I know what is causing this...

 -Toby.

Re: Intel DQ35MP

2008-01-11 Thread Marcos Laufer 
Here is the output from the Intel DQ35MP:

boot machine memory
Region 0: type 1 at 0x1000 for 630KB
Region 1: type 2 at 0x9e800 for 6kb
Region 2: type 2 at 0xe for 128KB
Region 3: type 1 at 0x10 for 998016KB
Region 4: type 4 at 0x3cfa for 772KB
Region 5: type 1 at 0x3d061000 for 16800KB
Region 6: type 2 at 0x3e0c9000 for 8KB
Region 7: type 1 at 0x3e0cb000 for 688KB
Region 8: type 4 at 0x3e177000 for 348KB
Region 9: type 1 at 0x3e1ce000 for 64KB
Region 10: type 4 at 0x3e1de000 for 28KB
Region 11: type 1 at 0x3e1e5000 for 12KB
Region 12: type 3 at 0x3e1e8000 for 44KB
Region 13: type 1 at 0x3e1f3000 for 4KB
Region 14: type 3 at 0x3e1f4000 for 44KB
Region 15: type 1 at 0x3e1ff000 for 4KB
Region 16: type 2 at 0x3e20 for 3072KB
Region 17: type 2 at 0x3e50 for 1024kb
Region 18: type 2 at 0x3e60 for 10240KB
Region 19: type 2 at 0xf000 for 131072KB
Region 20: type 2 at 0xffc0 for 4096KB
Low ram: 634KB High ram: 1015580KB
Total free memory: 1016218KB


Atentamente, Marcos Laufer Marcos Laufer - IPversion4.com * [EMAIL PROTECTED]
http://www.ipversion4.com ( 0800-444-HOSTING Rodriguez Peqa 468 1 C
- Original Message - 
From: [EMAIL PROTECTED]
To: rivo nurges [EMAIL PROTECTED]
Cc: misc@openbsd.org
Sent: Thursday, January 10, 2008 9:17 PM
Subject: Re: Intel DQ35MP


In gmane.os.openbsd.misc, you wrote:

  I had same problem with DQ965GF, DSDT was overwritten by msgbuf.
  As a quick hack I changed msgbuf size and it solved my problem. I
  haven't had time to debug it further.

  Index: sys/arch/i386/include/param.h
  ===
  RCS file: /OpenBSD/src/sys/arch/i386/include/param.h,v
  retrieving revision 1.42
  diff -u -3 -p -r1.42 param.h
  --- sys/arch/i386/include/param.h   1 Oct 2007 12:10:55 -   1.42
  +++ sys/arch/i386/include/param.h   10 Jan 2008 19:13:18 -
  @@ -97,7 +97,7 @@
   #defineUSPACE_ALIGN(0) /* u-area alignment 0-none */

   #ifndef MSGBUFSIZE
  -#define MSGBUFSIZE 4*NBPG  /* default message buffer size */
  +#define MSGBUFSIZE 2*NBPG  /* default message buffer size */
   #endif

Please send me the output of 'machine memory' at the boot prompt
for this machine.  I think I know what is causing this...

-Toby.
-- 
 [100~Plax]sb16i0A2172656B63616820636420726568746F6E61207473754A[dZ1!=b]salax

Re: Intel DQ35MP

2008-01-10 Thread Michał Koc 
Hello

I've noticed this problem on many different INTEL motherboard models.
Debugging showed that under the address where acpi structures should be 
are actually zeros.
So there is probably some memory mapping problem.

regards
M.K.

Marcos Laufer pisze:
 Hello , i tried updating the BIOS to the newest one, removed one ram stick,  
 installed
 latest snapshot and also tried disabling APM as you adviced me.
 When booting with bsd it doesn't recognize the devices just like before.
 Now i also tried booting with bsd.mp instead of bsd , and i get this error:


 OpenBSD 4.2-current (GENERIC.MP) #539: Tue Jan 8 17:20:15 MST 2008
 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
 RTC BIOS diagnostic error 80clock_battery
 cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (GenuineIntel 686-class) 
 2.39 GHz
 cpu0: 
 FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
  
 H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, 
 xTPR
 real mem = 1040625664 (992mb)
 avail mem = 998227968 (951mb)
 RTC BIOS diagnostic error 80clock_battery
 mainbus0 at root
 bios0 at mainbus0: at/286+ BIOS, date 12/10/07, SMBIOS rev. 2.4 @ 0xe2440 (31 
 entries)
 bios0: vendor Intel Corp. version JOQ3510J.86A.0731.2007.1210.2204 date 
 12/10/2007
 bios0: Intel Corporation DQ35MP
 acpi0 at bios0: rev 0panic: malloc: allocation too large
 Stopped atDebugger+0x4:  leave
 Debugger(e3ff000,0,d0916b48,2,3ff7) at Debugger+0x4
 panic(d06b38ce,d0916b64,1000,d07b0a20,) at panic+0x63
 malloc(f000ff5b,2,1,d0680060) at malloc+0x76
 acpi_load_table(0,f000ff53,d19cce3c,de3fe000,d19c1f80) at acpi_load_table+0x19
 acpi_loadtables(d19cce00,de3fd020,5,e) at acpi_loadtables+0x95
 acpi_attach(d19cbf80,d19cce00,d0916d50,d19cbf80,0) at acpi_attach+0xb2
 config_attach(d19cbf80,d078b980,d0916d50,d0604eb4) at config_attach+0xfd
 biosattach(d19cbfc0,d19cbf80,d0916e80,d19cbfc0,d02032c9) at biosattach+0x34e
 config_attach(d19cbfc0,d078ab70,d0916e80,d04a6504,d06d6958) at 
 config_attach+0xfd
 mainbus_attach(0,d19cbfc0,0,de3f7000,d0915334) at mainbus_attach+0x3d
 RUN AT LEAST ...

 Regards,
 Marcos

 - Original Message - 
 From: Pierre Riteau [EMAIL PROTECTED]
 To: Marcos Laufer [EMAIL PROTECTED]
 Cc: misc@openbsd.org
 Sent: Thursday, December 13, 2007 8:55 PM
 Subject: Re: Intel DQ35MP


 On Dec 13, 2007 9:25 PM, Marcos Laufer [EMAIL PROTECTED] wrote:
   
 Hello,

 I've just installed OpenBSD current on an Intel DQ35MP motherboard with a 
 Quad
 processor, this is the
 dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)
 

 boot -c to go in UKC or config -ef /bsd and use 'disable apm'
 to get acpi to attach. Maybe it will help.
 Also, you can get a newer snapshot.

   
 OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
 RTC BIOS diagnostic error 80clock_battery
 cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (GenuineIntel 686-class)
 2.39 GHz
 cpu0:
 FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
 H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
 xTPR
 real mem  = 2097643520 (2000MB)
 avail mem = 2020409344 (1926MB)
 RTC BIOS diagnostic error 80clock_battery
 mainbus0 at root
 bios0 at mainbus0: AT/286+ BIOS, date 07/26/07, SMBIOS rev. 2.4 @ 0xe2460 (30
 entries)
 bios0: vendor Intel Corp. version JOQ3510J.86A.0559.2007.0726.0425 date
 07/26/2007
 bios0: Intel Corporation DQ35MP
 apm0 at bios0: Power Management spec V1.2
 apm0: battery life expectancy 0%
 apm0: AC off, battery charge unknown, estimated 0:00 hours
 pcibios at bios0 function 0x1a not configured
 bios0: ROM list: 0xc/0xb400! 0xcb800/0x1e00! 0xcd800/0x1000
 0xce800/0x1000
 cpu0 at mainbus0
 pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
 pchb0 at pci0 dev 0 function 0 vendor Intel, unknown product 0x29b0 rev
 0x02
 vga1 at pci0 dev 2 function 0 vendor Intel, unknown product 0x29b2 rev 
 0x02:
 aperture at 0x9020, size 0x800
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
 wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
 vendor Intel, unknown product 0x29b4 (class communications subclass
 miscellaneous, rev 0x02) at pci0 dev 3 function 0 not configured
 pciide0 at pci0 dev 3 function 2 vendor Intel, unknown product 0x29b6 rev
 0x02: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to
 native-PCI
 pciide0: using irq 9 for native-PCI interrupt
 pciide0: channel 0 ignored (not responding; disabled or no drives?)
 pciide0: channel 1 ignored (not responding; disabled or no drives?)
 vendor Intel, unknown product 0x29b7 (class communications subclass serial,
 rev 0x02) at pci0 dev 3 function 3 not configured
 Intel ICH9 IGP AMT rev 0x02 at pci0 dev 25 function 0 not configured
 uhci0 at pci0 dev 26 function 0 Intel 82801I USB rev 0x02: irq 9
 uhci1 at pci0 dev 26 function 1 Intel 82801I USB rev

Re: Intel DQ35MP

2008-01-10 Thread rivo nurges 
Hi!

I had same problem with DQ965GF, DSDT was overwritten by msgbuf.
As a quick hack I changed msgbuf size and it solved my problem. I
haven't had time to debug it further.

Index: sys/arch/i386/include/param.h
===
RCS file: /OpenBSD/src/sys/arch/i386/include/param.h,v
retrieving revision 1.42
diff -u -3 -p -r1.42 param.h
--- sys/arch/i386/include/param.h   1 Oct 2007 12:10:55 -   1.42
+++ sys/arch/i386/include/param.h   10 Jan 2008 19:13:18 -
@@ -97,7 +97,7 @@
 #defineUSPACE_ALIGN(0) /* u-area alignment 0-none */
 
 #ifndef MSGBUFSIZE
-#define MSGBUFSIZE 4*NBPG  /* default message buffer size */
+#define MSGBUFSIZE 2*NBPG  /* default message buffer size */
 #endif

-- 
rix
http://www.ripe.net/perl/[EMAIL PROTECTED]

Re: Intel DQ35MP

2008-01-10 Thread weingart 
In gmane.os.openbsd.misc, you wrote:
 
  I had same problem with DQ965GF, DSDT was overwritten by msgbuf.
  As a quick hack I changed msgbuf size and it solved my problem. I
  haven't had time to debug it further.
 
  Index: sys/arch/i386/include/param.h
  ===
  RCS file: /OpenBSD/src/sys/arch/i386/include/param.h,v
  retrieving revision 1.42
  diff -u -3 -p -r1.42 param.h
  --- sys/arch/i386/include/param.h   1 Oct 2007 12:10:55 -   1.42
  +++ sys/arch/i386/include/param.h   10 Jan 2008 19:13:18 -
  @@ -97,7 +97,7 @@
   #defineUSPACE_ALIGN(0) /* u-area alignment 0-none */
   
   #ifndef MSGBUFSIZE
  -#define MSGBUFSIZE 4*NBPG  /* default message buffer size */
  +#define MSGBUFSIZE 2*NBPG  /* default message buffer size */
   #endif

Please send me the output of 'machine memory' at the boot prompt
for this machine.  I think I know what is causing this...

-Toby.
-- 
 [100~Plax]sb16i0A2172656B63616820636420726568746F6E61207473754A[dZ1!=b]salax

Re: Intel DQ35MP

2008-01-10 Thread Marcos Laufer 
Hello , i tried updating the BIOS to the newest one, removed one ram stick,  
installed
latest snapshot and also tried disabling APM as you adviced me.
When booting with bsd it doesn't recognize the devices just like before.
Now i also tried booting with bsd.mp instead of bsd , and i get this error:


OpenBSD 4.2-current (GENERIC.MP) #539: Tue Jan 8 17:20:15 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80clock_battery
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (GenuineIntel 686-class) 
2.39 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
 H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, 
xTPR
real mem = 1040625664 (992mb)
avail mem = 998227968 (951mb)
RTC BIOS diagnostic error 80clock_battery
mainbus0 at root
bios0 at mainbus0: at/286+ BIOS, date 12/10/07, SMBIOS rev. 2.4 @ 0xe2440 (31 
entries)
bios0: vendor Intel Corp. version JOQ3510J.86A.0731.2007.1210.2204 date 
12/10/2007
bios0: Intel Corporation DQ35MP
acpi0 at bios0: rev 0panic: malloc: allocation too large
Stopped atDebugger+0x4:  leave
Debugger(e3ff000,0,d0916b48,2,3ff7) at Debugger+0x4
panic(d06b38ce,d0916b64,1000,d07b0a20,) at panic+0x63
malloc(f000ff5b,2,1,d0680060) at malloc+0x76
acpi_load_table(0,f000ff53,d19cce3c,de3fe000,d19c1f80) at acpi_load_table+0x19
acpi_loadtables(d19cce00,de3fd020,5,e) at acpi_loadtables+0x95
acpi_attach(d19cbf80,d19cce00,d0916d50,d19cbf80,0) at acpi_attach+0xb2
config_attach(d19cbf80,d078b980,d0916d50,d0604eb4) at config_attach+0xfd
biosattach(d19cbfc0,d19cbf80,d0916e80,d19cbfc0,d02032c9) at biosattach+0x34e
config_attach(d19cbfc0,d078ab70,d0916e80,d04a6504,d06d6958) at 
config_attach+0xfd
mainbus_attach(0,d19cbfc0,0,de3f7000,d0915334) at mainbus_attach+0x3d
RUN AT LEAST ...

Regards,
Marcos

- Original Message - 
From: Pierre Riteau [EMAIL PROTECTED]
To: Marcos Laufer [EMAIL PROTECTED]
Cc: misc@openbsd.org
Sent: Thursday, December 13, 2007 8:55 PM
Subject: Re: Intel DQ35MP


On Dec 13, 2007 9:25 PM, Marcos Laufer [EMAIL PROTECTED] wrote:
 Hello,

 I've just installed OpenBSD current on an Intel DQ35MP motherboard with a Quad
 processor, this is the
 dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)

boot -c to go in UKC or config -ef /bsd and use 'disable apm'
to get acpi to attach. Maybe it will help.
Also, you can get a newer snapshot.


 OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
 RTC BIOS diagnostic error 80clock_battery
 cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (GenuineIntel 686-class)
 2.39 GHz
 cpu0:
 FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
 H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
 xTPR
 real mem  = 2097643520 (2000MB)
 avail mem = 2020409344 (1926MB)
 RTC BIOS diagnostic error 80clock_battery
 mainbus0 at root
 bios0 at mainbus0: AT/286+ BIOS, date 07/26/07, SMBIOS rev. 2.4 @ 0xe2460 (30
 entries)
 bios0: vendor Intel Corp. version JOQ3510J.86A.0559.2007.0726.0425 date
 07/26/2007
 bios0: Intel Corporation DQ35MP
 apm0 at bios0: Power Management spec V1.2
 apm0: battery life expectancy 0%
 apm0: AC off, battery charge unknown, estimated 0:00 hours
 pcibios at bios0 function 0x1a not configured
 bios0: ROM list: 0xc/0xb400! 0xcb800/0x1e00! 0xcd800/0x1000
 0xce800/0x1000
 cpu0 at mainbus0
 pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
 pchb0 at pci0 dev 0 function 0 vendor Intel, unknown product 0x29b0 rev
 0x02
 vga1 at pci0 dev 2 function 0 vendor Intel, unknown product 0x29b2 rev 0x02:
 aperture at 0x9020, size 0x800
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
 wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
 vendor Intel, unknown product 0x29b4 (class communications subclass
 miscellaneous, rev 0x02) at pci0 dev 3 function 0 not configured
 pciide0 at pci0 dev 3 function 2 vendor Intel, unknown product 0x29b6 rev
 0x02: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to
 native-PCI
 pciide0: using irq 9 for native-PCI interrupt
 pciide0: channel 0 ignored (not responding; disabled or no drives?)
 pciide0: channel 1 ignored (not responding; disabled or no drives?)
 vendor Intel, unknown product 0x29b7 (class communications subclass serial,
 rev 0x02) at pci0 dev 3 function 3 not configured
 Intel ICH9 IGP AMT rev 0x02 at pci0 dev 25 function 0 not configured
 uhci0 at pci0 dev 26 function 0 Intel 82801I USB rev 0x02: irq 9
 uhci1 at pci0 dev 26 function 1 Intel 82801I USB rev 0x02: irq 9
 uhci2 at pci0 dev 26 function 2 Intel 82801I USB rev 0x02: irq 10
 ehci0 at pci0 dev 26 function 7 Intel 82801I USB rev 0x02: irq 10
 usb0 at ehci0: USB revision 2.0
 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
 ppb0 at pci0 dev 28 function 0 Intel 82801I PCIE rev 0x02
 pci1 at ppb0 bus 1
 ppb1

Re: Intel DQ35MP

2007-12-14 Thread Marcos Laufer 
I'm sure i installed the install42.iso from december 6th , maybe there was 
something wrong
on that image?
I'll try burning the newest one

Thanks!


- Original Message - 
From: Jason George [EMAIL PROTECTED]
To: misc@openbsd.org
Sent: Thursday, December 13, 2007 8:42 PM
Subject: Re: Intel DQ35MP


Hello,

I've just installed OpenBSD current on an Intel DQ35MP motherboard with a Quad
processor, this is the
dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)

OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC


That isn't a current -CURRENT snapshot.  A lot has been changed in the 3+
weeks since that snapshot was released into the wild.

Re: Intel DQ35MP

2007-12-14 Thread Marcos Laufer 
I think the newest install42.iso is also wrong.
I open the .iso and the files inside have old dates (november 20 2007, and 
november 13
2007)
I'll make my own .iso with the rest of the files from the i386 snapshot 
directory

Regards,

- Original Message - 
From: Marcos Laufer [EMAIL PROTECTED]
To: Jason George [EMAIL PROTECTED]; misc@openbsd.org
Sent: Friday, December 14, 2007 3:39 PM
Subject: Re: Intel DQ35MP


I'm sure i installed the install42.iso from december 6th , maybe there was 
something wrong
on that image?
I'll try burning the newest one

Thanks!


- Original Message - 
From: Jason George [EMAIL PROTECTED]
To: misc@openbsd.org
Sent: Thursday, December 13, 2007 8:42 PM
Subject: Re: Intel DQ35MP


Hello,

I've just installed OpenBSD current on an Intel DQ35MP motherboard with a Quad
processor, this is the
dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)

OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC


That isn't a current -CURRENT snapshot.  A lot has been changed in the 3+
weeks since that snapshot was released into the wild.

Intel DQ35MP

2007-12-13 Thread Marcos Laufer 
Hello,

I've just installed OpenBSD current on an Intel DQ35MP motherboard with a Quad
processor, this is the
dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)

OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80clock_battery
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (GenuineIntel 686-class)
2.39 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem  = 2097643520 (2000MB)
avail mem = 2020409344 (1926MB)
RTC BIOS diagnostic error 80clock_battery
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/26/07, SMBIOS rev. 2.4 @ 0xe2460 (30
entries)
bios0: vendor Intel Corp. version JOQ3510J.86A.0559.2007.0726.0425 date
07/26/2007
bios0: Intel Corporation DQ35MP
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 0%
apm0: AC off, battery charge unknown, estimated 0:00 hours
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc/0xb400! 0xcb800/0x1e00! 0xcd800/0x1000
0xce800/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor Intel, unknown product 0x29b0 rev
0x02
vga1 at pci0 dev 2 function 0 vendor Intel, unknown product 0x29b2 rev 0x02:
aperture at 0x9020, size 0x800
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor Intel, unknown product 0x29b4 (class communications subclass
miscellaneous, rev 0x02) at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 vendor Intel, unknown product 0x29b6 rev
0x02: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using irq 9 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
vendor Intel, unknown product 0x29b7 (class communications subclass serial,
rev 0x02) at pci0 dev 3 function 3 not configured
Intel ICH9 IGP AMT rev 0x02 at pci0 dev 25 function 0 not configured
uhci0 at pci0 dev 26 function 0 Intel 82801I USB rev 0x02: irq 9
uhci1 at pci0 dev 26 function 1 Intel 82801I USB rev 0x02: irq 9
uhci2 at pci0 dev 26 function 2 Intel 82801I USB rev 0x02: irq 10
ehci0 at pci0 dev 26 function 7 Intel 82801I USB rev 0x02: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb0 at pci0 dev 28 function 0 Intel 82801I PCIE rev 0x02
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 Intel 82801I PCIE rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 Intel 82801I PCIE rev 0x02
pci3 at ppb2 bus 3
pciide1 at pci3 dev 0 function 0 Marvell 88SE6101 IDE rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide1: using irq 9 for native-PCI interrupt
pciide1: channel 0 ignored (not responding; disabled or no drives?)
pciide1: channel 1 ignored (not responding; disabled or no drives?)
ppb3 at pci0 dev 28 function 3 Intel 82801I PCIE rev 0x02
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 Intel 82801I PCIE rev 0x02
pci5 at ppb4 bus 5
uhci3 at pci0 dev 29 function 0 Intel 82801I USB rev 0x02: irq 10
uhci4 at pci0 dev 29 function 1 Intel 82801I USB rev 0x02: irq 11
uhci5 at pci0 dev 29 function 2 Intel 82801I USB rev 0x02: irq 9
ehci1 at pci0 dev 29 function 7 Intel 82801I USB rev 0x02: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0x92
pci6 at ppb5 bus 6
ichpcib0 at pci0 dev 31 function 0 Intel 82801IO LPC rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 vendor Intel, unknown product 0x2922 rev
0x02: irq 9, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: ATA, WDC WD3200AAKS-0, 12.0 SCSI2 0/direct
fixed
sd0: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec
total
ichiic0 at pci0 dev 31 function 3 Intel 82801I SMBus rev 0x02: irq 9
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 Intel UHCI root hub rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 Intel UHCI root hub rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 Intel UHCI root hub rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 Intel UHCI root hub rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0

Re: Intel DQ35MP

2007-12-13 Thread Jason George 
Hello,

I've just installed OpenBSD current on an Intel DQ35MP motherboard with a Quad
processor, this is the
dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)

OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC


That isn't a current -CURRENT snapshot.  A lot has been changed in the 3+ 
weeks since that snapshot was released into the wild.

Re: Intel DQ35MP

2007-12-13 Thread Pierre Riteau 
On Dec 13, 2007 9:25 PM, Marcos Laufer [EMAIL PROTECTED] wrote:
 Hello,

 I've just installed OpenBSD current on an Intel DQ35MP motherboard with a Quad
 processor, this is the
 dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)

boot -c to go in UKC or config -ef /bsd and use 'disable apm'
to get acpi to attach. Maybe it will help.
Also, you can get a newer snapshot.


 OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
 RTC BIOS diagnostic error 80clock_battery
 cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (GenuineIntel 686-class)
 2.39 GHz
 cpu0:
 FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
 H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
 xTPR
 real mem  = 2097643520 (2000MB)
 avail mem = 2020409344 (1926MB)
 RTC BIOS diagnostic error 80clock_battery
 mainbus0 at root
 bios0 at mainbus0: AT/286+ BIOS, date 07/26/07, SMBIOS rev. 2.4 @ 0xe2460 (30
 entries)
 bios0: vendor Intel Corp. version JOQ3510J.86A.0559.2007.0726.0425 date
 07/26/2007
 bios0: Intel Corporation DQ35MP
 apm0 at bios0: Power Management spec V1.2
 apm0: battery life expectancy 0%
 apm0: AC off, battery charge unknown, estimated 0:00 hours
 pcibios at bios0 function 0x1a not configured
 bios0: ROM list: 0xc/0xb400! 0xcb800/0x1e00! 0xcd800/0x1000
 0xce800/0x1000
 cpu0 at mainbus0
 pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
 pchb0 at pci0 dev 0 function 0 vendor Intel, unknown product 0x29b0 rev
 0x02
 vga1 at pci0 dev 2 function 0 vendor Intel, unknown product 0x29b2 rev 0x02:
 aperture at 0x9020, size 0x800
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
 wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
 vendor Intel, unknown product 0x29b4 (class communications subclass
 miscellaneous, rev 0x02) at pci0 dev 3 function 0 not configured
 pciide0 at pci0 dev 3 function 2 vendor Intel, unknown product 0x29b6 rev
 0x02: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to
 native-PCI
 pciide0: using irq 9 for native-PCI interrupt
 pciide0: channel 0 ignored (not responding; disabled or no drives?)
 pciide0: channel 1 ignored (not responding; disabled or no drives?)
 vendor Intel, unknown product 0x29b7 (class communications subclass serial,
 rev 0x02) at pci0 dev 3 function 3 not configured
 Intel ICH9 IGP AMT rev 0x02 at pci0 dev 25 function 0 not configured
 uhci0 at pci0 dev 26 function 0 Intel 82801I USB rev 0x02: irq 9
 uhci1 at pci0 dev 26 function 1 Intel 82801I USB rev 0x02: irq 9
 uhci2 at pci0 dev 26 function 2 Intel 82801I USB rev 0x02: irq 10
 ehci0 at pci0 dev 26 function 7 Intel 82801I USB rev 0x02: irq 10
 usb0 at ehci0: USB revision 2.0
 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
 ppb0 at pci0 dev 28 function 0 Intel 82801I PCIE rev 0x02
 pci1 at ppb0 bus 1
 ppb1 at pci0 dev 28 function 1 Intel 82801I PCIE rev 0x02
 pci2 at ppb1 bus 2
 ppb2 at pci0 dev 28 function 2 Intel 82801I PCIE rev 0x02
 pci3 at ppb2 bus 3
 pciide1 at pci3 dev 0 function 0 Marvell 88SE6101 IDE rev 0xb1: DMA
 (unsupported), channel 0 configured to native-PCI, channel 1 configured to
 native-PCI
 pciide1: using irq 9 for native-PCI interrupt
 pciide1: channel 0 ignored (not responding; disabled or no drives?)
 pciide1: channel 1 ignored (not responding; disabled or no drives?)
 ppb3 at pci0 dev 28 function 3 Intel 82801I PCIE rev 0x02
 pci4 at ppb3 bus 4
 ppb4 at pci0 dev 28 function 4 Intel 82801I PCIE rev 0x02
 pci5 at ppb4 bus 5
 uhci3 at pci0 dev 29 function 0 Intel 82801I USB rev 0x02: irq 10
 uhci4 at pci0 dev 29 function 1 Intel 82801I USB rev 0x02: irq 11
 uhci5 at pci0 dev 29 function 2 Intel 82801I USB rev 0x02: irq 9
 ehci1 at pci0 dev 29 function 7 Intel 82801I USB rev 0x02: irq 10
 usb1 at ehci1: USB revision 2.0
 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1
 ppb5 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0x92
 pci6 at ppb5 bus 6
 ichpcib0 at pci0 dev 31 function 0 Intel 82801IO LPC rev 0x02: PM disabled
 ahci0 at pci0 dev 31 function 2 vendor Intel, unknown product 0x2922 rev
 0x02: irq 9, AHCI 1.2
 scsibus0 at ahci0: 32 targets
 sd0 at scsibus0 targ 1 lun 0: ATA, WDC WD3200AAKS-0, 12.0 SCSI2 0/direct
 fixed
 sd0: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec
 total
 ichiic0 at pci0 dev 31 function 3 Intel 82801I SMBus rev 0x02: irq 9
 iic0 at ichiic0
 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
 spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
 usb2 at uhci0: USB revision 1.0
 uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1
 usb3 at uhci1: USB revision 1.0
 uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1
 usb4 at uhci2: USB revision 1.0
 uhub4 at usb4 Intel UHCI root hub rev 1.00/1.00 addr 1
 usb5 at uhci3: USB revision 1.0
 uhub5 at usb5 Intel UHCI root hub rev 1.00/1.00 addr 1
 usb6 at uhci4: USB revision 1.0
 uhub6