this bioctl/dmesg were dumped from box using cheap LSI MEGARAID 150-4
(4-port Serial ATA RAID controller). it is ami(4) too.
$ sudo bioctl ami0
Password:
Volume Status Size Device
ami0 0 Online 240063086592 sd0 RAID5
0 Online 80021028864 0:0.0 noencl <SAMSUNG HD080HJ ZH10>
1 Online 80021028864 0:1.0 noencl <SAMSUNG HD080HJ ZH10>
2 Online 80021028864 0:2.0 noencl <SAMSUNG HD080HJ ZH10>
3 Online 80021028864 0:3.0 noencl <SAMSUNG HD080HJ ZH10>
$ dmesg
OpenBSD 3.8-stable (GENERIC) #1: Sat Jan 14 17:40:45 EET 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID
cpu0: Enhanced SpeedStep 1500 MHz (1420 mV): unknown EST cpu, no changes
possible
real mem = 2137497600 (2087400K)
avail mem = 1944379392 (1898808K)
using 4278 buffers containing 106979328 bytes (104472K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(d6) BIOS, date 10/07/05, BIOS32 rev. 0 @ 0xfa000
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcb84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfca20/336 (19 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 12
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2640
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x9400! 0xcc000/0x2200
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x05
ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
ami0 at pci2 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: irq 12 LSI 523
64b/lhc
ami0: FW 713N, BIOS vG119, 64MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 228942MB, 29186 cyl, 255 head, 63 sec, 512 bytes/sec, 468873216 sec total
scsibus1 at ami0: 16 targets
vendor "Intel", unknown product 0x0326 (class system subclass interrupt, rev 0x09) at pci1 dev 0
function 1 not configured
vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x05: aperture at
0xd0500000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 12 address
00:30:48:86:01:00
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03
pci4 at ppb3 bus 4
bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 5 address
00:30:48:86:01:01
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 12
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 9
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0 configured to
compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TEAC, CD-224E, 1.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA, channel 0 configured to
native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
"Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff45 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
