Hi Misc@,
I can't seem to use this syntax any more:
pass in quick log on vlan101 reply-to {(vlan101 a.b.c.14)} inet proto icmp
from internal_net to vlan101:0 keep state (sloppy source-track global)
flags any tag INTERNAL_IN
while this is working:
pass in quick log on vlan101 reply-to {(vlan101 a.b.c.14)}
I am on the new shiny 4 sept 2009 kernel, which has the new shiny PF.
Thanks,
Insan
dmesg:
OpenBSD 4.6-current (GENERIC.MP) #11: Fri Sep 4 23:34:01 WIT 2009
r...@greenrouter-jkt01.mygreenlinks.net:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 9fixed_disk
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz (GenuineIntel 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR
real mem = 2142744576 (2043MB)
avail mem = 2067689472 (1971MB)
RTC BIOS diagnostic error 9fixed_disk
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/13/07, SMBIOS rev. 2.4 @
0x7fbe4000 (43 entries)
bios0: vendor Intel Corporation version
S3000.86B.02.00.0051.091720081311 date 09/17/2008
bios0: Intel S3000AH
acpi0 at bios0: rev 2
acpi0: tables DSDT SLIC FACP APIC WDDT HPET MCFG ASF! SSDT SSDT SSDT SSDT
SSDT HEST BERT ERST EINJ
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S1) PEX4(S4) PEX5(S4)
UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) AC9M(S4) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz (GenuineIntel 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 5 pa 0xfec0, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 5
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus -1 (PEX1)
acpiprt4 at acpi0: bus -1 (PEX2)
acpiprt5 at acpi0: bus -1 (PEX3)
acpiprt6 at acpi0: bus 2 (PEX4)
acpiprt7 at acpi0: bus 3 (PEX5)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc/0x9000
cpu0: Enhanced SpeedStep 3000 MHz: speeds: 3000, 2400 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel E7230 Host rev 0x00
ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01: apic 5 int
17 (irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01: apic 5 int 17
(irq 255)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01: apic 5 int 16
(irq 255)
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 Intel PRO/1000MT (82573E) rev 0x03: apic 5
int 17 (irq 9), address 00:15:17:39:1c:bc
Intel 82573E Serial rev 0x03 at pci3 dev 0 function 3 not configured
Intel 82573E KCS rev 0x03 at pci3 dev 0 function 4 not configured
uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic 5 int
23 (irq 11)
uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: apic 5 int
19 (irq 10)
uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: apic 5 int
18 (irq 11)
uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x01: apic 5 int
16 (irq 11)
ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: apic 5 int
23 (irq 11)
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0xe1
pci4 at ppb3 bus 4
skc0 at pci4 dev 0 function 0 D-Link Systems DGE-530T B1 rev 0x11, Yukon
Lite (0x9): apic 5 int 21 (irq 11)
sk0 at skc0 port A: address 00:1e:58:9a:99:65
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5
skc1 at pci4 dev 1 function 0 D-Link Systems DGE-530T B1 rev 0x11, Yukon
Lite (0x9): apic 5 int 22 (irq 11)
sk1 at skc1 port A: address 00:1e:58:9a:98:f6
eephy1 at sk1 phy 0: 88E1011 Gigabit PHY, rev. 5
vga1 at pci4 dev 4 function 0 ATI ES1000 rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 5 int 18 (irq 11)
drm0 at radeondrm0
em1 at pci4 dev 5 function 0 Intel PRO/1000MT (82541GI) rev 0x05: apic 5
int 17 (irq 9), address 00:15:17:39:1c:bd
ichpcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configur
ed to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: HL-DT-ST, RW/DVD GCC-4522B, 1.01 ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
