>Please try compiling a GENERIC kernel from a -current src tree but
>uncommenting the azalia device in the config..
Almost ... ;-)
Azalia causes a panic during the boot process, right after loading the azalia
driver.
Here is some output (rewritten by hand) as the thinkbad X60s has no serial port:
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 11
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Analog Devices AD1981HD (rev.2.0)
azalia0: codec: High Definition Audio rev. 1.0
uvm_fault (0xd06f3720, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at 0:uvm_fault(0xd06f3720, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at db_read_bytes+0x14: movb 0(%edx), %al
ddb>ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80204 swapper
For "trace" please .... see the question below:
(I'm a beginner, so please apologize)
How do you get a kernel panic output to the console without a serial port?
I have tried with an USB-Serial Controller (here a snip, concerning the
controller):
ublcom0 at uhub2 port1
uplcom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
ucom0 at uplcom0
While booting I tried at the boot prompt:
set tty ucom0
I get: "ucom0 not a console device"
After the OS is loaded, I can use without problems a dump terminal
Regards
Didier
P.S here a /var/run/dmesg.boot (without azalia compiled) + USB-serial
Controller connected
OpenBSD 3.9-current (GENERIC) #728: Tue May 9 00:02:22 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2
cpu0: Enhanced SpeedStep 600 MHz (1004 mV): unknown EST cpu, no changes possible
real mem = 2137419776 (2087324K)
avail mem = 1942142976 (1896624K)
using 4256 buffers containing 106975232 bytes (104468K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b6) BIOS, date 03/13/06, BIOS32 rev. 0 @ 0xfd690,
SMBIOS rev. 2.4 @ 0xe0010 (67 entries)
bios0: LENOVO 17025PG
pcibios0 at bios0: rev 2.1 @ 0xfd620/0x9e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0xe400! 0xce800/0x1000 0xcf800/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
0xee100000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: irq 11,
address 00:16:d3:21:4b:b6
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
"Intel PRO/Wireless 3945ABG" rev 0x02 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: irq 11
"Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
"Ricoh 5C822 SD/MMC" rev 0x18 at pci5 dev 0 function 2 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HTS541010G9SA00>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: irq 11
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uplcom0 at uhub0 port 1ugen0 at uhub3 port 2
uplcom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
ucom0 at uplcom0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
