Re: Problem with current i386 snapshot
Same here on a Thinkpad x31. Mitja -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Emilio Perea Sent: Sunday, August 03, 2008 6:29 AM To: misc@openbsd.org Subject: Problem with current i386 snapshot This build seems to go into an endless reboot cycle, rebooting before anything shows up in the console of a Soekris net4801. The previous snapshot (build #1004) works fine. Unfortunately I have nothing to show for it as far as filing a proper bug report. BIOS screen followed by the changing console to com0 message followed by the BIOS screen etc. Problem build: OpenBSD 4.4-beta (GENERIC) #1010: Sat Aug 2 12:39:46 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC Last working version dmesg: OpenBSD 4.4-beta (GENERIC) #1004: Thu Jul 31 00:42:16 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC 586-class) 267 MHz cpu0: FPU,TSC,MSR,CX8,CMOV,MMX cpu0: TSC disabled real mem = 133787648 (127MB) avail mem = 120946688 (115MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 20/80/03, BIOS32 rev. 0 @ 0xf7840 pcibios0 at bios0: rev 2.0 @ 0xf/0x1 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0x9000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00 sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c2:9e:30 nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c2:9e:31 nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c2:9e:32 nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00 gpio0 at gscpcib0: 64 pins NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: SanDisk SDCFX-2048 wd0: 4-sector PIO, LBA, 1953MB, 4001760 sectors wd0(pciide0:0:0): using PIO mode 4 geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3 wdstatus 0 ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev 0x08: irq 11, version 1.0, legacy support isa0 at gscpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS gpio1 at nsclpcsio0: 29 pins gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 Compaq OHCI root hub rev 1.00/1.00 addr 1 biomask fbe5 netmask ffe5 ttymask softraid0 at root root on wd0a swap on wd0b dump on wd0b
Re: Problem with current i386 snapshot
I can confirm issues with the latest snapshot, but not the crashlooping. My Soekris 5501-70 does : boot booting hd0a:/bsd: 6238880+1041588 [52+319728+302648]=0x789824 entry point at 0x200120 and then stands there waiting for a powercycle. For reference, /bsd has md5 sum 3a62104b876b145d8e3c445c3ef27ff8 Cheers, Paul 'WEiRD' de Weerd On Sun, Aug 03, 2008 at 12:00:45PM +0200, Mitja Mu?eni? wrote: | Same here on a Thinkpad x31. | | Mitja | | -Original Message- | From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] | On Behalf Of Emilio Perea | Sent: Sunday, August 03, 2008 6:29 AM | To: misc@openbsd.org | Subject: Problem with current i386 snapshot | | This build seems to go into an endless reboot cycle, rebooting before | anything shows up in the console of a Soekris net4801. The previous | snapshot (build #1004) works fine. Unfortunately I have | nothing to show | for it as far as filing a proper bug report. BIOS screen followed by | the changing console to com0 message followed by the BIOS screen etc. | | Problem build: | OpenBSD 4.4-beta (GENERIC) #1010: Sat Aug 2 12:39:46 MDT 2008 | [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC | | Last working version dmesg: | OpenBSD 4.4-beta (GENERIC) #1004: Thu Jul 31 00:42:16 MDT 2008 | [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC | cpu0: Geode(TM) Integrated Processor by National Semi (Geode | by NSC 586-class) 267 MHz | cpu0: FPU,TSC,MSR,CX8,CMOV,MMX | cpu0: TSC disabled | real mem = 133787648 (127MB) | avail mem = 120946688 (115MB) | mainbus0 at root | bios0 at mainbus0: AT/286+ BIOS, date 20/80/03, BIOS32 rev. 0 | @ 0xf7840 | pcibios0 at bios0: rev 2.0 @ 0xf/0x1 | pcibios0: pcibios_get_intr_routing - function not supported | pcibios0: PCI IRQ Routing information unavailable. | pcibios0: PCI bus #0 is the last bus | bios0: ROM list: 0xc8000/0x9000 | cpu0 at mainbus0 | pci0 at mainbus0 bus 0: configuration mode 1 (bios) | pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00 | sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, | DP83816A: irq 10, address 00:00:24:c2:9e:30 | nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 | sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, | DP83816A: irq 10, address 00:00:24:c2:9e:31 | nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 | sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, | DP83816A: irq 10, address 00:00:24:c2:9e:32 | nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 | gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00 | gpio0 at gscpcib0: 64 pins | NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured | pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: | DMA, channel 0 wired to compatibility, channel 1 wired to | compatibility | wd0 at pciide0 channel 0 drive 0: SanDisk SDCFX-2048 | wd0: 4-sector PIO, LBA, 1953MB, 4001760 sectors | wd0(pciide0:0:0): using PIO mode 4 | geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev | 0x00: iid 6 revision 3 wdstatus 0 | ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev | 0x08: irq 11, version 1.0, legacy support | isa0 at gscpcib0 | isadma0 at isa0 | com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo | com0: console | com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo | pckbc0 at isa0 port 0x60/5 | pckbd0 at pckbc0 (kbd slot) | pckbc0: using irq 1 for kbd slot | wskbd0 at pckbd0: console keyboard | pcppi0 at isa0 port 0x61 | midi0 at pcppi0: PC speaker | spkr0 at pcppi0 | nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS | gpio1 at nsclpcsio0: 29 pins | gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1: | npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 | usb0 at ohci0: USB revision 1.0 | uhub0 at usb0 Compaq OHCI root hub rev 1.00/1.00 addr 1 | biomask fbe5 netmask ffe5 ttymask | softraid0 at root | root on wd0a swap on wd0b dump on wd0b | -- [++-]+++.+++[---].+++[+ +++-].++[-]+.--.[-] http://www.weirdnet.nl/
Re: Problem with current i386 snapshot
Hi, Paul de Weerd schrieb: I can confirm issues with the latest snapshot, but not the crashlooping. My Soekris 5501-70 does : boot booting hd0a:/bsd: 6238880+1041588 [52+319728+302648]=0x789824 entry point at 0x200120 and then stands there waiting for a powercycle. I got a different behaviour on my ALIX... it gets to where you get at your Soekris but instead of standing there the ALIX gets into a reboot cycle. /bsd md5: 3a62104b876b145d8e3c445c3ef27ff8 Michael
Re: Problem with current i386 snapshot
On Sun, Aug 03, 2008 at 09:46:23PM +0200, Paul de Weerd wrote: | I can confirm issues with the latest snapshot, but not the | crashlooping. My Soekris 5501-70 does : | | boot | booting hd0a:/bsd: 6238880+1041588 [52+319728+302648]=0x789824 | entry point at 0x200120 | | and then stands there waiting for a powercycle. | | For reference, /bsd has md5 sum 3a62104b876b145d8e3c445c3ef27ff8 I should add that bsd.rd boots just fine. For now, it looks like the kernel image is just broken, the md5 sum does not match what is listed in the MD5 file on the same mirror where I got the file (the MD5 file says bsd should have b9f0a5f5918ca5e115ea960c3bde8eeb as md5 sum). OpenBSD 4.4-beta (GENERIC) #1011: Sat Aug 2 21:46:49 MDT 2008 (the latest and greatest from ftp.openbsd.org) boots fine. Cheers, Paul 'WEiRD' de Weerd -- [++-]+++.+++[---].+++[+ +++-].++[-]+.--.[-] http://www.weirdnet.nl/
Re: Problem with current i386 snapshot
On Sun, Aug 03, 2008 at 10:26:54PM +0200, Paul de Weerd wrote: OpenBSD 4.4-beta (GENERIC) #1011: Sat Aug 2 21:46:49 MDT 2008 (the latest and greatest from ftp.openbsd.org) boots fine. Yes, that fixed the problem. (I was not able to try bsd.rd on my 4801 since I seem to have screwed up my settings and don't get a boot prompt. It's time to fix that now! :-)
Problem with current i386 snapshot
This build seems to go into an endless reboot cycle, rebooting before anything shows up in the console of a Soekris net4801. The previous snapshot (build #1004) works fine. Unfortunately I have nothing to show for it as far as filing a proper bug report. BIOS screen followed by the changing console to com0 message followed by the BIOS screen etc. Problem build: OpenBSD 4.4-beta (GENERIC) #1010: Sat Aug 2 12:39:46 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC Last working version dmesg: OpenBSD 4.4-beta (GENERIC) #1004: Thu Jul 31 00:42:16 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC 586-class) 267 MHz cpu0: FPU,TSC,MSR,CX8,CMOV,MMX cpu0: TSC disabled real mem = 133787648 (127MB) avail mem = 120946688 (115MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 20/80/03, BIOS32 rev. 0 @ 0xf7840 pcibios0 at bios0: rev 2.0 @ 0xf/0x1 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0x9000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00 sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c2:9e:30 nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c2:9e:31 nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c2:9e:32 nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00 gpio0 at gscpcib0: 64 pins NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: SanDisk SDCFX-2048 wd0: 4-sector PIO, LBA, 1953MB, 4001760 sectors wd0(pciide0:0:0): using PIO mode 4 geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3 wdstatus 0 ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev 0x08: irq 11, version 1.0, legacy support isa0 at gscpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS gpio1 at nsclpcsio0: 29 pins gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 Compaq OHCI root hub rev 1.00/1.00 addr 1 biomask fbe5 netmask ffe5 ttymask softraid0 at root root on wd0a swap on wd0b dump on wd0b