Re: The keyboard doesn't work in X after the most recent update
On 2011-11-05, Norman Golisz li...@zcat.de wrote:
On Sat Nov 5 2011 22:39, tkdchen wrote:
Hi all,
My keyboard does not work in fvwm, GNOME or KDE after the most recent
update. No key response except the Fn+brightness-up and down.
I run 5.0-current on Thinkpad x201i. Thanks a lot for your help.
This is a known bug in xkb. As suggested on tech@:
_symbols_dir=/usr/X11R6/share/X11/xkb/symbols/srvr_ctrl/srvr_ctrl
mv ${_symbols_dir}/srvr_ctrl ${_symbols_dir}/_srvr_ctrl
mv ${_symbols_dir}/_srvr_ctrl/srvr_ctrl ${_symbols_dir}
rmdir ${_symbols_dir}/_srvr_ctrl
As also suggested on tech@, the file you are mv'ing here is not the
right version. You should remove the directory and reinstall xshare50.tgz.
The simplest way on a system where you have console access is to boot
the install kernel and select 'upgrade'.
Re: The keyboard doesn't work in X after the most recent update
Hello Norman, On 11/05/11 20:13, Norman Golisz wrote: ... since 5.0, xenocara uses xkeyboard-config instead of the old /etc/X11/xkb. In the last couple of days, some code has been changed in xkeyboard-config, however, and made keyboards in X non-functional, when the /usr/X11R6/share/X11/xkb/symbols/srvr_ctrl directory was present. This directory was removed and replaced by a bare file [1]. So, chances are, older versions are not affected on your netbook. Thx -- I suppose I missed the part with the single file. The keyboard works now under Xorg on current. Best Regards Andreas
Re: The keyboard doesn't work in X after the most recent update
On Sat, Nov 5, 2011 at 5:45 PM, Andreas Bartelt o...@bartula.de wrote: On 11/05/11 15:39, tkdchen wrote: Hi all, My keyboard does not work in fvwm, GNOME or KDE after the most recent update. No key response except the Fn+brightness-up and down. I run 5.0-current on Thinkpad x201i. Thanks a lot for your help. I've noticed that the keyboard of an Asus EEE 701 also doesn't work with Xorg on current (I followed the steps from current.html). However, I didn't test any older versions of OpenBSD on this netbook. Does anybody know if this a known or a new problem with this model? I'm not aware of any specific problem to this model. Without more details it's hard to give you any useful advice. Also, normally, the install/upgrade script in binary snapshots includes code to remove the extra directory. If you upgraded by using bsd.rd and a snapshot, you should not be affected. -- Matthieu Herrb
The keyboard doesn't work in X after the most recent update
Hi all, My keyboard does not work in fvwm, GNOME or KDE after the most recent update. No key response except the Fn+brightness-up and down. I run 5.0-current on Thinkpad x201i. Thanks a lot for your help. My dmesg is: OpenBSD 5.0-current (GENERIC) #16: Sat Nov 5 13:14:54 CST 2011 c...@chen-laptop.my.domain:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz (GenuineIntel 686-class) 2.27 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,LAHF real mem = 1998626816 (1906MB) avail mem = 1955852288 (1865MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/07/10, BIOS32 rev. 0 @ 0xfdbe0, SMBIOS rev. 2.6 @ 0xe0010 (78 entries) bios0: vendor LENOVO version 6QET46WW (1.16 ) date 06/07/2010 bios0: LENOVO 32493DC acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 2, remapped to apid 1 acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG_) acpiprt2 at acpi0: bus 13 (EXP1) acpiprt3 at acpi0: bus -1 (EXP2) acpiprt4 at acpi0: bus -1 (EXP3) acpiprt5 at acpi0: bus 5 (EXP4) acpiprt6 at acpi0: bus 2 (EXP5) acpicpu0 at acpi0: C3, C1, PSS acpipwrres0 at acpi0: PUBS acpitz0 at acpi0: critical temperature is 100 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model 42T4835 serial40 type LION oem SANYO acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: GDCK not docked (0) bios0: ROM list: 0xc/0x1! 0xd/0x1000 0xd1000/0x1000 0xdd000/0x3000! 0xe/0x1 cpu0: Enhanced SpeedStep 2262 MHz: speeds: 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199, 1066, 933 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel Core Host rev 0x02 vga1 at pci0 dev 2 function 0 Intel Mobile HD graphics rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xd000, size 0x1000 inteldrm0 at vga1: apic 1 int 16 drm0 at inteldrm0 Intel 3400 MEI rev 0x06 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 Intel 82577LM rev 0x06: msi, address f0:de:f1:0a:4a:ee ehci0 at pci0 dev 26 function 0 Intel 3400 USB rev 0x06: apic 1 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 Intel 3400 HD Audio rev 0x06: msi azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 3400 PCIE rev 0x06: apic 1 int 20 pci1 at ppb0 bus 13 ppb1 at pci0 dev 28 function 3 Intel 3400 PCIE rev 0x06: apic 1 int 23 pci2 at ppb1 bus 5 ppb2 at pci0 dev 28 function 4 Intel 3400 PCIE rev 0x06: apic 1 int 20 pci3 at ppb2 bus 2 iwn0 at pci3 dev 0 function 0 Intel WiFi Link 1000 rev 0x00: msi, MIMO 1T2R, BGS, address 00:26:c7:5b:20:30 ehci1 at pci0 dev 29 function 0 Intel 3400 USB rev 0x06: apic 1 int 19 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xa6 pci4 at ppb3 bus 14 pcib0 at pci0 dev 31 function 0 Intel QM57 LPC rev 0x06 ahci0 at pci0 dev 31 function 2 Intel 3400 AHCI rev 0x06: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: ATA, WDC WD2500BEVT-0, 02.0 SCSI3 0/direct fixed naa.50014ee25a080d3b sd0: 238475MB, 512 bytes/sector, 488397168 sectors ichiic0 at pci0 dev 31 function 3 Intel 3400 SMBus rev 0x06: apic 1 int 23 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM itherm0 at pci0 dev 31 function 6 Intel 3400 Thermal rev 0x06 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 7.4 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhub2 at uhub0 port 1 Intel Rate Matching
Re: The keyboard doesn't work in X after the most recent update
On Sat Nov 5 2011 22:39, tkdchen wrote:
Hi all,
My keyboard does not work in fvwm, GNOME or KDE after the most recent
update. No key response except the Fn+brightness-up and down.
I run 5.0-current on Thinkpad x201i. Thanks a lot for your help.
This is a known bug in xkb. As suggested on tech@:
_symbols_dir=/usr/X11R6/share/X11/xkb/symbols/srvr_ctrl/srvr_ctrl
mv ${_symbols_dir}/srvr_ctrl ${_symbols_dir}/_srvr_ctrl
mv ${_symbols_dir}/_srvr_ctrl/srvr_ctrl ${_symbols_dir}
rmdir ${_symbols_dir}/_srvr_ctrl
Norman.
Re: The keyboard doesn't work in X after the most recent update
On Sat Nov 5 2011 22:39, tkdchen wrote: Hi all, My keyboard does not work in fvwm, GNOME or KDE after the most recent update. No key response except the Fn+brightness-up and down. I run 5.0-current on Thinkpad x201i. Thanks a lot for your help. Remember to read http://www.openbsd.org/faq/current.html, before applying snapshots or updating your local cvs checkout and compiling from it. Norman.
Re: The keyboard doesn't work in X after the most recent update
2011/11/5 Norman Golisz li...@zcat.de: On Sat Nov 5 2011 22:39, tkdchen wrote: Hi all, My keyboard does not work in fvwm, GNOME or KDE after the most recent update. No key response except the Fn+brightness-up and down. I run 5.0-current on Thinkpad x201i. Thanks a lot for your help. Remember to read http://www.openbsd.org/faq/current.html, before applying snapshots or updating your local cvs checkout and compiling from it. Solved. Thank you all. :) Norman.
Re: The keyboard doesn't work in X after the most recent update
On 11/05/11 15:39, tkdchen wrote: Hi all, My keyboard does not work in fvwm, GNOME or KDE after the most recent update. No key response except the Fn+brightness-up and down. I run 5.0-current on Thinkpad x201i. Thanks a lot for your help. I've noticed that the keyboard of an Asus EEE 701 also doesn't work with Xorg on current (I followed the steps from current.html). However, I didn't test any older versions of OpenBSD on this netbook. Does anybody know if this a known or a new problem with this model? Best Regards Andreas
Re: The keyboard doesn't work in X after the most recent update
Hi Andreas, On Sat Nov 5 2011 18:45, Andreas Bartelt wrote: On 11/05/11 15:39, tkdchen wrote: Hi all, My keyboard does not work in fvwm, GNOME or KDE after the most recent update. No key response except the Fn+brightness-up and down. I run 5.0-current on Thinkpad x201i. Thanks a lot for your help. I've noticed that the keyboard of an Asus EEE 701 also doesn't work with Xorg on current (I followed the steps from current.html). However, I didn't test any older versions of OpenBSD on this netbook. Does anybody know if this a known or a new problem with this model? since 5.0, xenocara uses xkeyboard-config instead of the old /etc/X11/xkb. In the last couple of days, some code has been changed in xkeyboard-config, however, and made keyboards in X non-functional, when the /usr/X11R6/share/X11/xkb/symbols/srvr_ctrl directory was present. This directory was removed and replaced by a bare file [1]. So, chances are, older versions are not affected on your netbook. Best regards, Norman.
