I assume its related, but when I plug in a CF-PCMCIA adapter, it
attaches as com(4). This is a known good card that attaches properly
on macppc pcmcia.
on amd64:
com2 at pcmcia0 function 0: can't allocate i/o space
ppc:
wdc3 at pcmcia0 function 0 "LEXAR ATA FLASH CARD, ATA FLASH, " port 0x0/16
wd1 at wdc3 channel 0 drive 0: <LEXAR ATA FLASH>
wd1: 1-sector PIO, LBA, 3915MB, 8018640 sectors
wd1(wdc3:0:0): using BIOS timings
On 2007 Jun 03 (Sun) at 08:32:31 -0700 (-0700), Peter Hessler wrote:
:I have a pcmcia malo(4) card that I would like to use, and when I plug
:it in it gives me "malo0: timeout at boot firmware load!". The card is
:a NetGear WG511 v2, and yes, I did pkg_add the firmware. dmesg with
:acpi and MALO_DEBUG/CMALO_DEBUG defined below.
:
:
:
:
:--
:On a paper submitted by a physicist colleague:
:
:"This isn't right. This isn't even wrong."
: -- Wolfgang Pauli
:
:
:OpenBSD 4.1-current (ACPI) #3: Sat Jun 2 19:40:48 PDT 2007
: [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/ACPI
:real mem = 2012672000 (1919MB)
:avail mem = 1931935744 (1842MB)
:mainbus0 at root
:bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfc68f (23 entries)
:bios0: Hewlett-Packard HP Compaq nx6125 (PZ895UA#ABA)
:acpi0 at mainbus0: rev 0
:acpi0: tables DSDT FACP APIC MCFG SSDT
:acpitimer0 at acpi0: 3579545 Hz, 32 bits
:acpimadt0 at acpi0 addr 0xfec01000: PC-AT compat
:cpu0 at mainbus0: apid 0 (boot processor)
:cpu0: AMD Turion(tm) 64 Mobile ML-37 , 1995.33 MHz
:cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
:cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
:64b/line 16-way L2 cache
:cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
:associative
:cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully
:associative
:cpu0: AMD erratum 89 present, BIOS upgrade may be required
:cpu0: apic clock running at 199MHz
:ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 21, 24 pins
:ioapic0: misconfigured as apic 0, remapped to apid 1
:acpiprt0 at acpi0: bus 1 (C048)
:acpiprt1 at acpi0: bus 2 (C0AB)
:acpiprt2 at acpi0: bus 0 (C047)
:acpiec0 at acpi0: C111
:acpicpu at acpi0 not configured
:acpitz0 at acpi0, critical temperature: 94 degC
:acpitz1 at acpi0, critical temperature: 100 degC
:acpitz2 at acpi0, critical temperature: 100 degC
:acpibat0 at acpi0: C179: not present
:acpibat1 at acpi0: C178: not present
:acpiac0 at acpi0: AC unit online
:acpibtn0 at acpi0: C1F0
:acpibtn1 at acpi0: C1F1
:couldnt fetch acpicpu_softc
:cpu0: PowerNow! K8 1995 MHz: speeds: 2000 1800 1600 800 MHz
:pci0 at mainbus0 bus 0: configuration mode 1
:pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x01
:ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
:pci1 at ppb0 bus 1
:vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200M" rev 0x00
:wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
:wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
:ppb1 at pci0 dev 4 function 0 "ATI RS480 PCIE" rev 0x00
:pci2 at ppb1 bus 16
:ppb2 at pci0 dev 5 function 0 "ATI RS480 PCIE" rev 0x00
:pci3 at ppb2 bus 32
:ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x00: apic 1 int
:19 (irq 10), version 1.0, legacy support
:ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x00: apic 1 int
:19 (irq 10), version 1.0, legacy support
:ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x00: apic 1 int
:19 (irq 10)
:usb0 at ehci0: USB revision 2.0
:uhub0 at usb0
:uhub0: ATI EHCI root hub, rev 2.00/1.00, addr 1
:uhub0: 8 ports with 8 removable, self powered
:piixpm0 at pci0 dev 20 function 0 "ATI IXP400 SMBus" rev 0x11: SMI
:iic0 at piixpm0
:admtemp0 at iic0 addr 0x4c: adm1032
:pciide0 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x00: DMA,
:channel 0 configured to compatibility, channel 1 configured to
:compatibility
:wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2060AH>
:wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
:wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
:atapiscsi0 at pciide0 channel 1 drive 0
:scsibus0 at atapiscsi0: 2 targets
:cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJ-840D, 1.02> SCSI0 5/cdrom
:removable
:cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
:pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x00
:ppb3 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x00
:pci4 at ppb3 bus 2
:bge0 at pci4 dev 1 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3
:(0x3003): apic 1 int 23 (irq 10), address 00:0f:b0:f6:46:19
:brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
:"Broadcom BCM4319" rev 0x02 at pci4 dev 2 function 0 not configured
:cbb0 at pci4 dev 4 function 0 "TI PCI7XX1 CardBus" rev 0x00: apic 1 int
:20 (irq 11)
:"TI PCI7XX1 FireWire" rev 0x00 at pci4 dev 4 function 2 not configured
:"TI PCI7XX1 Flash" rev 0x00 at pci4 dev 4 function 3 not configured
:sdhc0 at pci4 dev 4 function 4 "TI PCI7XX1 Secure Data" rev 0x00: apic
:1 int 21 (irq 9)
:sdmmc0 at sdhc0
:sdmmc1 at sdhc0
:sdmmc2 at sdhc0
:cardslot0 at cbb0 slot 0 flags 0
:cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
:pcmcia0 at cardslot0
:auixp0 at pci0 dev 20 function 5 "ATI IXP400 AC97" rev 0x02: apic 1 int
:17 (irq 5)
:auixp0: soft resetting aclink
:"ATI IXP400 Modem" rev 0x02 at pci0 dev 20 function 6 not configured
:pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
:pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
:pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
:pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
:usb1 at ohci0: USB revision 1.0
:uhub1 at usb1
:uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
:uhub1: 4 ports with 4 removable, self powered
:usb2 at ohci1: USB revision 1.0
:uhub2 at usb2
:uhub2: ATI OHCI root hub, rev 1.00/1.00, addr 1
:uhub2: 4 ports with 4 removable, self powered
:isa0 at pcib0
:isadma0 at isa0
:pckbc0 at isa0 port 0x60/5
:pckbd0 at pckbc0 (kbd slot)
:pckbc0: using irq 1 for kbd slot
:wskbd0 at pckbd0: console keyboard, using wsdisplay0
:pmsi0 at pckbc0 (aux slot)
:pckbc0: using irq 12 for aux slot
:wsmouse0 at pmsi0 mux 0
:pcppi0 at isa0 port 0x61
:midi0 at pcppi0: <PC speaker>
:spkr0 at pcppi0
:lpt0 at isa0 port 0x378/4 irq 7
:ugen0 at uhub2 port 1
:ugen0: AuthenTec Fingerprint Sensor, rev 1.10/6.21, addr 2
:softraid0 at root
:dkcsum: wd0 matches BIOS drive 0x80
:root on wd0a swap on wd0b dump on wd0b
:ac97: codec id 0x43585430 (Conexant CX?????)
:ac97: codec features reserved, headphone, 18 bit DAC, 18 bit ADC, No 3D
:Stereo
:audio0 at auixp0
:malo0 at cardbus0 dev 0 function 0: irq 11, address ff:ff:ff:ff:ff:ff
:malo0: malo_init
:malo0: loading boot firmware
:malo0: timeout at boot firmware load!
:malo0: malo_init failed, reseting card
:malo0: malo_init
:malo0: loading boot firmware
:malo0: timeout at boot firmware load!
:malo0: malo_init failed, reseting card
:
--
Aquadextrous, adj.:
Possessing the ability to turn the bathtub faucet on and off
with your toes.
-- Rich Hall, "Sniglets"
