ciss on hp DL385 G5?
Hi, We're trying to install OpenBSD on a HP ProLiant DL385 G5. But as shown in the dmesg below, the RAID controller (HP Smart Array P400) is not detected. According to the ciss(4) man page it should be supported. Has anyone got OpenBSD to install on such a machine? -martin OpenBSD 4.3-current (RAMDISK_CD) #9: Mon Jun 2 12:57:51 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/ RAMDISK_CD real mem = 2134159360 (2035MB) avail mem = 2072326144 (1976MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xee000 (66 entries) bios0: vendor HP version A09 date 03/27/2008 bios0: HP ProLiant DL385 G5 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SPCR MCFG HPET SPMI ERST APIC SRAT BERT HEST acpiprt0 at acpi0: bus 5 (EXB0) acpiprt1 at acpi0: bus 8 (EXB1) acpiprt2 at acpi0: bus 11 (EXB3) acpiprt3 at acpi0: bus 3 (EXB4) acpiprt4 at acpi0: bus 0 (PCI0) acpiprt5 at acpi0: bus 67 (EXBA) acpiprt6 at acpi0: bus 70 (EXBB) acpiprt7 at acpi0: bus 65 (EXBD) acpiprt8 at acpi0: bus 64 (PCI1) cpu0 at mainbus0: (uniprocessor) cpu0: Quad-Core AMD Opteron(tm) Processor 2356, 2300.37 MHz cpu0: FPU ,VME ,DE ,PSE ,TSC ,MSR ,PAE ,MCE ,CX8 ,APIC ,SEP ,MTRR ,PGE ,MCA ,CMOV ,PAT ,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,MMXX,FFXSR,LONG, 3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative pci0 at mainbus0 bus 0: configuration mode 1 vga1 at pci0 dev 3 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) Compaq iLO rev 0x03 at pci0 dev 4 function 0 not configured Compaq iLO rev 0x03 at pci0 dev 4 function 2 not configured uhci0 at pci0 dev 4 function 4 Hewlett-Packard USB rev 0x00: irq 11 Hewlett-Packard IPMI rev 0x00 at pci0 dev 4 function 6 not configured ppb0 at pci0 dev 5 function 0 ServerWorks HT-1000 PCI rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci1 dev 13 function 0 ServerWorks HT-1000 PCIX rev 0xc0 pci2 at ppb1 bus 2 pchb0 at pci0 dev 6 function 0 ServerWorks HT-1000 rev 0x00 pciide0 at pci0 dev 6 function 1 ServerWorks HT-1000 IDE rev 0x00: DMA atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: TEAC, DW-224E-V, C.CA ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 0 ServerWorks HT-1000 LPC rev 0x00 at pci0 dev 6 function 2 not configured ohci0 at pci0 dev 7 function 0 ServerWorks HT-1000 USB rev 0x01: irq 5, version 1.0, legacy support ohci1 at pci0 dev 7 function 1 ServerWorks HT-1000 USB rev 0x01: irq 5, version 1.0, legacy support ehci0 at pci0 dev 7 function 2 ServerWorks HT-1000 USB rev 0x01: irq 5 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 ServerWorks EHCI root hub rev 2.00/1.00 addr 1 ppb2 at pci0 dev 15 function 0 ServerWorks HT-2100 PCIE rev 0xa2 pci3 at ppb2 bus 5 ppb3 at pci0 dev 16 function 0 ServerWorks HT-2100 PCIE rev 0xa2 pci4 at ppb3 bus 8 ppb4 at pci0 dev 17 function 0 ServerWorks HT-2100 PCIE rev 0xa2 pci5 at ppb4 bus 14 ppb5 at pci0 dev 18 function 0 ServerWorks HT-2100 PCIE rev 0xa2 pci6 at ppb5 bus 11 ppb6 at pci0 dev 19 function 0 ServerWorks HT-2100 PCIE rev 0xa2 pci7 at ppb6 bus 3 ppb7 at pci7 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci8 at ppb7 bus 4 bnx0 at pci8 dev 0 function 0 Broadcom BCM5708 rev 0x12: irq 11 pchb1 at pci0 dev 24 function 0 AMD AMD64 10h HyperTransport rev 0x00 pchb2 at pci0 dev 24 function 1 AMD AMD64 10h Address Map rev 0x00 pchb3 at pci0 dev 24 function 2 AMD AMD64 10h DRAM Cfg rev 0x00 pchb4 at pci0 dev 24 function 3 AMD AMD64 10h Misc Cfg rev 0x00 pchb5 at pci0 dev 24 function 4 AMD AMD64 10h Link Cfg rev 0x00 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 Hewlett-Packard UHCI root hub rev 1.00/1.00 addr 1 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 ServerWorks OHCI root hub rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 ServerWorks OHCI root hub rev 1.00/1.00 addr 1 isa0 at mainbus0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo com1: probed fifo depth: 0 bytes pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 rd0: fixed, 4480 blocks uhub4 at uhub3 port 1 vendor 0x04b4 product 0x6560 rev 2.00/0.07 addr 2 uhidev0 at uhub1 port 1 configuration 1 interface 0 HP Virtual Keyboard rev 1.10/0.02 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 HP Virtual Keyboard rev 1.10/0.02 addr 2 uhidev1: iclass 3/1 uhid at uhidev1 not configured uhub5 at uhub1 port 2 HP Virtual Hub rev 1.10/0.01 addr 3 root on rd0a swap on rd0b dump on rd0b bnx0: address 00:1e:0b:c3:ae:4e
Re: ciss on hp DL385 G5?
4 jun 2008 kl. 14.19 skrev Martin Hedenfalk: Hi, We're trying to install OpenBSD on a HP ProLiant DL385 G5. But as shown in the dmesg below, the RAID controller (HP Smart Array P400) is not detected. According to the ciss(4) man page it should be supported. Has anyone got OpenBSD to install on such a machine? As a followup I installed FreeBSD 7.0-RELEASE on this machine without any trouble. See dmesg below. However, I would love to be able to run OpenBSD instead :-) -martin Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Quad-Core AMD Opteron(tm) Processor 2356 (2300.09-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x100f23 Stepping = 3 Features = 0x178bfbff FPU ,VME ,DE ,PSE ,TSC ,MSR ,PAE ,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT Features2=0x802009SSE3,MON,CX16,b23 AMD Features=0xee400800SYSCALL,MMX+,FFXSR,b26,RDTSCP,LM,3DNow!+, 3DNow! AMD Features2 =0x7ffLAHF,CMP,SVM,ExtAPIC,CR8,b5,b6,b7,Prefetch,b9,b10 Cores per package: 4 real memory = 2145705984 (2046 MB) avail memory = 2090188800 (1993 MB) ACPI APIC Table: HP ProLiant FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 Version 1.1 irqs 0-15 on motherboard ioapic1 Version 1.1 irqs 16-31 on motherboard ioapic2 Version 1.1 irqs 32-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) acpi0: HP ProLiant on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter ACPI-safe frequency 3579545 Hz quality 850 acpi_timer0: 32-bit timer at 3.579545MHz port 0x920-0x923 on acpi0 acpi_hpet0: High Precision Event Timer iomem 0xfed0-0xfed003ff on acpi0 Timecounter HPET frequency 14318180 Hz quality 900 cpu0: ACPI CPU on acpi0 cpu1: ACPI CPU on acpi0 cpu2: ACPI CPU on acpi0 cpu3: ACPI CPU on acpi0 pcib0: ACPI Host-PCI bridge on acpi0 pci0: ACPI PCI bus on pcib0 vgapci0: VGA-compatible display port 0x1000-0x10ff mem 0xe800-0xefff,0xf7ff-0xf7ff irq 44 at device 3.0 on pci0 pci0: base peripheral at device 4.0 (no driver attached) pci0: base peripheral at device 4.2 (no driver attached) uhci0: UHCI (generic) USB controller port 0x1800-0x181f irq 45 at device 4.4 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: UHCI (generic) USB controller on uhci0 usb0: USB revision 1.0 uhub0: (0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 on usb0 uhub0: 2 ports with 2 removable, self powered pci0: serial bus at device 4.6 (no driver attached) pcib1: ACPI PCI-PCI bridge at device 5.0 on pci0 pci1: ACPI PCI bus on pcib1 pcib2: ACPI PCI-PCI bridge at device 13.0 on pci1 pci2: ACPI PCI bus on pcib2 atapci0: ServerWorks HT1000 UDMA100 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 6.1 on pci0 ata0: ATA channel 0 on atapci0 ata0: [ITHREAD] ata1: ATA channel 1 on atapci0 ata1: [ITHREAD] isab0: PCI-ISA bridge at device 6.2 on pci0 isa0: ISA bus on isab0 ohci0: OHCI (generic) USB controller port 0x1c00-0x1cff mem 0xf7ee-0xf7ee0fff irq 5 at device 7.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: OHCI (generic) USB controller on ohci0 usb1: USB revision 1.0 uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 on usb1 uhub1: 2 ports with 2 removable, self powered ohci1: OHCI (generic) USB controller port 0x3000-0x30ff mem 0xf7ed-0xf7ed0fff irq 5 at device 7.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: OHCI (generic) USB controller on ohci1 usb2: USB revision 1.0 uhub2: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: EHCI (generic) USB 2.0 controller port 0x3400-0x34ff mem 0xf7ec-0xf7ec0fff irq 5 at device 7.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb1 usb2 usb3: EHCI (generic) USB 2.0 controller on ehci0 usb3: USB revision 2.0 uhub3: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 on usb3 uhub3: 4 ports with 4 removable, self powered pcib3: ACPI PCI-PCI bridge irq 42 at device 15.0 on pci0 pci5: ACPI PCI bus on pcib3 pcib4: ACPI PCI-PCI bridge irq 38 at device 16.0 on pci0 pci8: ACPI PCI bus on pcib4 pcib5: PCI-PCI bridge irq 39 at device 17.0 on pci0 pci14: PCI
Re: ciss on hp DL385 G5?
Martin Hedenfalk wrote: We're trying to install OpenBSD on a HP ProLiant DL385 G5. But as shown in the dmesg below, the RAID controller (HP Smart Array P400) is not detected. According to the ciss(4) man page it should be supported. Has anyone got OpenBSD to install on such a machine? I don't have any DL385s, but maybe try disabling acpi and see if it works. It looks like OpenBSD isn't seeing the bus that ciss sits on.