Re: monitoring raid with mpi
yeah, this is akward... i guess i should plug my mpi in again. On 05/04/2007, at 2:50 AM, Thierry Lacoste wrote: On Wednesday 04 April 2007 17:37, Chris Black wrote: Thierry Lacoste wrote: I installed OpenBSD on a Dell PowerEdge with a raid1 array controlled by a SAS 5iR controller thanks to the new mpi driver. mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: irq 5 scsibus0 at mpi0: 63 targets sd0 at scsibus0 targ 0 lun 0: SCSI3 0/ direct fixed sd0: 69618MB, 69618 cyl, 16 head, 128 sec, 512 bytes/sec, 142577664 sec total I would like to know if there is a way to monitor my array. Regards, Thierry. Have you tried bioctl? Yes. I use it with ami (4) but here it gives # bioctl mpi0 bioctl: Can't locate mpi0 device via /dev/bio The bio 4 manpage dosn't mention mpi0. Thierry.
Re: monitoring raid with mpi
On Wednesday 04 April 2007 17:37, Chris Black wrote: > Thierry Lacoste wrote: > > I installed OpenBSD on a Dell PowerEdge with > > a raid1 array controlled by a SAS 5iR controller > > thanks to the new mpi driver. > > > > mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: irq 5 > > scsibus0 at mpi0: 63 targets > > sd0 at scsibus0 targ 0 lun 0: SCSI3 0/direct > > fixed sd0: 69618MB, 69618 cyl, 16 head, 128 sec, 512 bytes/sec, 142577664 > > sec total > > > > I would like to know if there is a way to monitor my array. > > > > Regards, > > Thierry. > > Have you tried bioctl? Yes. I use it with ami (4) but here it gives # bioctl mpi0 bioctl: Can't locate mpi0 device via /dev/bio The bio 4 manpage dosn't mention mpi0. Thierry.
Re: monitoring raid with mpi
Thierry Lacoste wrote: > I installed OpenBSD on a Dell PowerEdge with > a raid1 array controlled by a SAS 5iR controller > thanks to the new mpi driver. > > mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: irq 5 > scsibus0 at mpi0: 63 targets > sd0 at scsibus0 targ 0 lun 0: SCSI3 0/direct fixed > sd0: 69618MB, 69618 cyl, 16 head, 128 sec, 512 bytes/sec, 142577664 sec total > > I would like to know if there is a way to monitor my array. > > Regards, > Thierry. > > Have you tried bioctl? Chris
monitoring raid with mpi
I installed OpenBSD on a Dell PowerEdge with a raid1 array controlled by a SAS 5iR controller thanks to the new mpi driver. mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: irq 5 scsibus0 at mpi0: 63 targets sd0 at scsibus0 targ 0 lun 0: SCSI3 0/direct fixed sd0: 69618MB, 69618 cyl, 16 head, 128 sec, 512 bytes/sec, 142577664 sec total I would like to know if there is a way to monitor my array. Regards, Thierry.