nfe0 issues on -current dated 20 Aug 2014
I recently installed OpenBSD-current snapshot onto a box that has an nvidia chipset, including integrated an integrated MCP51 10/100 nvidia network controller. I cannot seem to get the network to work under OpenBSD, although it worked quite well with FreeBSD. the related bits in dmesg are: nfe0 at pci0 dev 20 function 0 NVIDIA MCP51 LAN rev 0xa3: apic 2 int 20, address 00:18:f3:35:6d:d4 nfe0: could not load rx buf DMA mapnfe0: could not allocate Rx ring I tried searching via google.com for anything I could find even partially related to this, but I've come up empty handed. kern.version=OpenBSD 5.6-current (GENERIC) #284: Wed Aug 20 23:07:52 MDT 2014 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC -- Chuck Burns Audemus Jura Nostra Defendere
Re: nfe0 issues on -current dated 20 Aug 2014
Try a more recent snapshot, there was a fix that went in after that one: revision 1.107 date: 2014/08/20 23:56:57; author: dlg; state: Exp; lines: +3 -1; commitid: LKds0X7ar6JW3YqG; after allocating an mbuf and cluster you still need to init the length fields. found by steven roberts, who also tested this fix for me On Wed, Aug 27, 2014 at 10:18:31PM -0500, Chuck Burns wrote: I recently installed OpenBSD-current snapshot onto a box that has an nvidia chipset, including integrated an integrated MCP51 10/100 nvidia network controller. I cannot seem to get the network to work under OpenBSD, although it worked quite well with FreeBSD. the related bits in dmesg are: nfe0 at pci0 dev 20 function 0 NVIDIA MCP51 LAN rev 0xa3: apic 2 int 20, address 00:18:f3:35:6d:d4 nfe0: could not load rx buf DMA mapnfe0: could not allocate Rx ring I tried searching via google.com for anything I could find even partially related to this, but I've come up empty handed. kern.version=OpenBSD 5.6-current (GENERIC) #284: Wed Aug 20 23:07:52 MDT 2014 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC -- Chuck Burns Audemus Jura Nostra Defendere
Re: nfe0 issues on -current dated 20 Aug 2014
On Thursday, August 28, 2014 2:01:10 PM Jonathan Gray wrote: Try a more recent snapshot, there was a fix that went in after that one: revision 1.107 date: 2014/08/20 23:56:57; author: dlg; state: Exp; lines: +3 -1; commitid: LKds0X7ar6JW3YqG; after allocating an mbuf and cluster you still need to init the length fields. found by steven roberts, who also tested this fix for me snip Awesome, works great. Thanks! -- Chuck Burns Audemus Jura Nostra Defendere
Re: nfe0 issues
hi, i have similar problem too, my sk(4) autoselect only show 10baseT full duplex, before upgrade to 4.2 its show 1000baseT full duplex. it also use eephy*. from this thread i know there's a patch, but how do i apply the patch without upgrade to current ? just download the diff and re compile ? or someone else have a better idea ? here's my copy of dmesg, and pls cc me, i'm not in the list. thank you. rgds, Agung --- OpenBSD 4.2-stable (GENERIC) #5: Tue Nov 6 19:23:37 WIT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Xeon(TM) CPU 2.40GHz (GenuineIntel 686-class) 2.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,C NXT-ID,xTPR real mem = 2146463744 (2047MB) avail mem = 2067763200 (1971MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/29/03, BIOS32 rev. 0 @ 0xfd6e0, SMBIOS rev. 2.31 @ 0xe3010 (46 entries) bios0: vendor Phoenix Technologies LTD version E7501CW20.86B.0025.P07.0308290925 date 08/29/2003 bios0: Intel Corporation SE7501CW2 pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde80/352 (20 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801CA LPC rev 0x00) pcibios0: PCI bus #4 is the last bus bios0: ROM list: 0xc/0x8000 0xc8000/0x800 0xe3000/0x1000! acpi0 at mainbus0: rev 0 acpi0: tables DSDT FACP APIC BOOT SPCR acpitimer0 at acpi0: 3579545 Hz, 24 bits acpi device at acpi0 from table DSDT not configured acpi device at acpi0 from table FACP not configured acpi device at acpi0 from table APIC not configured acpi device at acpi0 from table BOOT not configured acpi device at acpi0 from table SPCR not configured acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (ICH3) acpiprt2 at acpi0: bus 3 (Z000) acpiprt3 at acpi0: bus 2 (Z001) acpicpu0 at acpi0 acpicpu1 at acpi0 acpicpu2 at acpi0 acpicpu3 at acpi0 acpicpu4 at acpi0 acpicpu5 at acpi0 acpicpu6 at acpi0 acpicpu7 at acpi0 acpibtn0 at acpi0: PWRB cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel E7501 MCH Host rev 0x01 Intel E7500 DRAM rev 0x01 at pci0 dev 0 function 1 not configured ppb0 at pci0 dev 2 function 0 Intel E7500 MCH rev 0x01 pci1 at ppb0 bus 1 Intel 82870P2 IOxAPIC rev 0x04 at pci1 dev 28 function 0 not configured ppb1 at pci1 dev 29 function 0 Intel 82870P2 PCIX-PCIX rev 0x04 pci2 at ppb1 bus 2 bge0 at pci2 dev 2 function 0 Broadcom BCM5701 rev 0x15, BCM5701 B5 (0x0105): irq 10, address 00:0a:5e:64:8e:14 brgphy0 at bge0 phy 1: BCM5701 10/100/1000baseT PHY, rev. 0 Intel 82870P2 IOxAPIC rev 0x04 at pci1 dev 30 function 0 not configured ppb2 at pci1 dev 31 function 0 Intel 82870P2 PCIX-PCIX rev 0x04 pci3 at ppb2 bus 3 Intel E7500 MCH rev 0x01 at pci0 dev 2 function 1 not configured ppb3 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0x42 pci4 at ppb3 bus 4 skc0 at pci4 dev 1 function 0 3Com 3c940 rev 0x10, Yukon (0x1): irq 3 sk0 at skc0 port A: address 00:0a:5e:65:59:f0 eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3 xl0 at pci4 dev 2 function 0 3Com 3c905B 100Base-TX rev 0x30: irq 5, address 00:50:04:73:36:ba exphy0 at xl0 phy 24: 3Com internal media interface vga1 at pci4 dev 3 function 0 ATI Rage XL rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) fxp0 at pci4 dev 4 function 0 Intel 8255x rev 0x0d, i82550: irq 11, address 00:02:b3:d8:ea:bb inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 ichpcib0 at pci0 dev 31 function 0 Intel 82801CA LPC rev 0x02 pciide0 at pci0 dev 31 function 1 Intel 82801CA IDE rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configur ed to compatibility wd0 at pciide0 channel 0 drive 0: ST340014A wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: ASUS, CD-S520/A, 2.0K SCSI0 5/cdrom removable wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) ichiic0 at pci0 dev 31 function 3 Intel 82801CA/CAM SMBus rev 0x02: irq 3 iic0 at ichiic0 lm1 at iic0 addr 0x2c: W83627HF isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 lm0 at isa0 port 0x290/8: W83627HF lm1 detached npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 biomask f3dd netmask fffd ttymask pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b
nfe0 issues
I recently installed 4.2 release on my evga 680i based motherboard , which uses nfe(4) for the onboard gig NIC's. There seems to be an issue in the handling of the autodetection of media types and the speed it can run at when manual selection is set. So say for instance I set it manually to 100baseTX it will no longer function and does not send packets. If I then set it to 10baseT it will work fine, I have checked the network routers/cables and interfaces from a windows partition which detects a 100mbps link. I have notived that on the router it detects a 100mbps link before the kernel initiatesthe device during boot i.e before any mention of nfe on the screen. Has anyone else had any similar issues using nfe interfaces ?
Re: nfe0 issues
On Nov 6, 2007 2:08 PM, Chris Harper [EMAIL PROTECTED] wrote: I recently installed 4.2 release on my evga 680i based motherboard , which uses nfe(4) for the onboard gig NIC's. There seems to be an issue in the handling of the autodetection of media types and the speed it can run at when manual selection is set. So say for instance I set it manually to 100baseTX it will no longer function and does not send packets. If I then set it to 10baseT it will work fine, I have checked the network routers/cables and interfaces from a windows partition which detects a 100mbps link. I have notived that on the router it detects a 100mbps link before the kernel initiatesthe device during boot i.e before any mention of nfe on the screen. Try using a gigabit switch. I remember having similar issues with which were solved by switching to 1000baseTX.
Re: nfe0 issues
Sorry about not including a dmesg output previously. I will try a snapshot and report back on any progress. OpenBSD 4.2 (GENERIC.MP) #252: Tue Aug 28 10:53:04 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (GenuineIntel 686-class) 3.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR real mem = 2145923072 (2046MB) avail mem = 2067329024 (1971MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 09/28/07, BIOS32 rev. 0 @ 0xfa870, SMBIOS rev. 2.4 @ 0xf (38 entries) bios0: vendor Phoenix Technologies, LTD version 6.00 PG date 09/28/2007 bios0: EVGA 122-CK-NF68 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 3.0 @ 0xf/0xd144 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfcfe0/352 (20 entries) pcibios0: bad IRQ table checksum pcibios0: PCI BIOS has 20 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 10 11 pcibios0: no compatible PCI ICU found pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc/0xe000 0xd/0x4000! 0xd4000/0x1800 mainbus0: Intel MP Specification (Version 1.4) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 333 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (GenuineIntel 686-class) 3.01 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type PCI mainbus0: bus 3 is type ISA ioapic0 at mainbus0: apid 4 pa 0xfec0, version 11, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 NVIDIA C55 Host rev 0xa2 NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 1 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 2 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 3 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 4 not configured NVIDIA C55 Memory rev 0xa2 at pci0 dev 0 function 5 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 6 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 7 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 0 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 1 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 2 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 3 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 4 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 5 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 6 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 2 function 0 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 2 function 1 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 2 function 2 not configured ppb0 at pci0 dev 3 function 0 NVIDIA C55 PCIE rev 0xa1 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor NVIDIA, unknown product 0x0290 rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) NVIDIA MCP55 Memory rev 0xa1 at pci0 dev 9 function 0 not configured pcib0 at pci0 dev 10 function 0 NVIDIA MCP55 ISA rev 0xa2 nviic0 at pci0 dev 10 function 1 NVIDIA MCP55 SMBus rev 0xa2 iic0 at nviic0 iic1 at nviic0 iic1: addr 0x20 01=97 09=ff 0e=0f 0f=0c 10=ff 11=ff 12=ff 13=ff iic1: addr 0x23 01=f9 09=ff 0e=0f 0f=0c 10=ff 11=ff 12=ff 13=ff iic1: addr 0x28 00=84 02=04 04=00 05=00 06=30 07=30 08=01 09=80 0a=01 0b=c0 0c=3c 0d=3c 0e=0a 0f=0a 10=84 12=50 13=00 14=00 15=01 16=01 17=3c 18=43 19=37 1a=00 1b=00 1f=cf 20=a1 21=ec 22=cd 23=cd 24=ae 25=c0 26=e4 27=bf 29=3f 2b=da 2c=00 2d=d5 2e=8a 2f=dc 30=41 31=30 32=46 33=1c 34=12 35=a1 36=b7 37=c2 38=b0 39=00 3a=7f 3b=5e 3c=ae 3d=76 3e=a2 40=01 41=fa 42=1f 46=07 47=d4 48=28 49=00 4a=40 4b=44 4c=18 4d=15 4e=00 4f=a3 52=00 56=00 57=00 58=c1 59=33 5c=00 5d=07 5e=04 5f=05 60=84 62=03 63=25 64=80 65=c0 66=3c 68=0a 6a=0a 80=84 82=04 84=00 85=00 86=30 87=30 88=01 89=80 8a=01 8b=c0 8c=3c 8d=3c 8e=0a 8f=0a 90=84 92=50 93=00 94=00 95=01 96=01 97=3c 98=43 99=37 9a=00 9b=00 9f=d7 a0=a1 a1=ec a2=cd a3=cd a4=ae a5=c0 a6=e4 a7=bf a9=3e ab=da ac=00 ad=d5 ae=8a af=dc b0=41 b1=30 b2=46 b3=1c b4=12 b5=a1 b6=b7 b7=c2 b8=b0 b9=00 ba=7f bb=5e bc=ae bd=76 be=a2 c0=01 c1=fa c2=1f c6=07 c7=d4 c8=28 c9=00 ca=40 cb=44 cc=18 cd=15 ce=00 cf=a3 d2=00 d6=00 d7=00 d8=c1 d9=33 dc=00 dd=07 de=04 df=05 e0=84 e2=03 e3=25 e4=80 e5=c0 e6=3c e8=0a ea=0a ohci0 at pci0 dev 11 function 0 NVIDIA MCP55 USB rev 0xa1: apic 4 int 10 (irq 10), version 1.0, legacy support ehci0 at pci0 dev 11 function 1 NVIDIA MCP55 USB rev 0xa2: apic 4 int 11 (irq 11) usb0
Re: nfe0 issues
OpenBSD 4.2 (GENERIC.MP) #252: Tue Aug 28 10:53:04 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (GenuineIntel 686-class) 3.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR real mem = 2145923072 (2046MB) avail mem = 2067329024 (1971MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 09/28/07, BIOS32 rev. 0 @ 0xfa870, SMBIOS rev. 2.4 @ 0xf (38 entries) bios0: vendor Phoenix Technologies, LTD version 6.00 PG date 09/28/2007 bios0: EVGA 122-CK-NF68 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 3.0 @ 0xf/0xd144 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfcfe0/352 (20 entries) pcibios0: bad IRQ table checksum pcibios0: PCI BIOS has 20 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 10 11 pcibios0: no compatible PCI ICU found pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc/0xe000 0xd/0x4000! 0xd4000/0x1800 mainbus0: Intel MP Specification (Version 1.4) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 333 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (GenuineIntel 686-class) 3.01 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type PCI mainbus0: bus 3 is type ISA ioapic0 at mainbus0: apid 4 pa 0xfec0, version 11, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 NVIDIA C55 Host rev 0xa2 NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 1 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 2 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 3 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 4 not configured NVIDIA C55 Memory rev 0xa2 at pci0 dev 0 function 5 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 6 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 0 function 7 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 0 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 1 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 2 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 3 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 4 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 5 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 1 function 6 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 2 function 0 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 2 function 1 not configured NVIDIA C55 Memory rev 0xa1 at pci0 dev 2 function 2 not configured ppb0 at pci0 dev 3 function 0 NVIDIA C55 PCIE rev 0xa1 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor NVIDIA, unknown product 0x0290 rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) NVIDIA MCP55 Memory rev 0xa1 at pci0 dev 9 function 0 not configured pcib0 at pci0 dev 10 function 0 NVIDIA MCP55 ISA rev 0xa2 nviic0 at pci0 dev 10 function 1 NVIDIA MCP55 SMBus rev 0xa2 iic0 at nviic0 iic1 at nviic0 iic1: addr 0x20 01=97 09=ff 0e=0f 0f=0c 10=ff 11=ff 12=ff 13=ff iic1: addr 0x23 01=f9 09=ff 0e=0f 0f=0c 10=ff 11=ff 12=ff 13=ff iic1: addr 0x28 00=84 02=04 04=00 05=00 06=30 07=30 08=01 09=80 0a=01 0b=c0 0c=3c 0d=3c 0e=0a 0f=0a 10=84 12=50 13=00 14=00 15=01 16=01 17=3c 18=43 19=37 1a=00 1b=00 1f=cf 20=a1 21=ec 22=cd 23=cd 24=ae 25=c0 26=e4 27=bf 29=3f 2b=da 2c=00 2d=d5 2e=8a 2f=dc 30=41 31=30 32=46 33=1c 34=12 35=a1 36=b7 37=c2 38=b0 39=00 3a=7f 3b=5e 3c=ae 3d=76 3e=a2 40=01 41=fa 42=1f 46=07 47=d4 48=28 49=00 4a=40 4b=44 4c=18 4d=15 4e=00 4f=a3 52=00 56=00 57=00 58=c1 59=33 5c=00 5d=07 5e=04 5f=05 60=84 62=03 63=25 64=80 65=c0 66=3c 68=0a 6a=0a 80=84 82=04 84=00 85=00 86=30 87=30 88=01 89=80 8a=01 8b=c0 8c=3c 8d=3c 8e=0a 8f=0a 90=84 92=50 93=00 94=00 95=01 96=01 97=3c 98=43 99=37 9a=00 9b=00 9f=d7 a0=a1 a1=ec a2=cd a3=cd a4=ae a5=c0 a6=e4 a7=bf a9=3e ab=da ac=00 ad=d5 ae=8a af=dc b0=41 b1=30 b2=46 b3=1c b4=12 b5=a1 b6=b7 b7=c2 b8=b0 b9=00 ba=7f bb=5e bc=ae bd=76 be=a2 c0=01 c1=fa c2=1f c6=07 c7=d4 c8=28 c9=00 ca=40 cb=44 cc=18 cd=15 ce=00 cf=a3 d2=00 d6=00 d7=00 d8=c1 d9=33 dc=00 dd=07 de=04 df=05 e0=84 e2=03 e3=25 e4=80 e5=c0 e6=3c e8=0a ea=0a ohci0 at pci0 dev 11 function 0 NVIDIA MCP55 USB rev 0xa1: apic 4 int 10 (irq 10), version 1.0, legacy support ehci0 at pci0 dev 11 function 1 NVIDIA MCP55 USB rev 0xa2: apic 4 int 11 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 pciide0 at pci0 dev 13