Greetings
I am trying to use the SparkLan WMIR-215GN in a Soekris 5501. The
mini-pci is not seen as a rt2860 chipset.
The dmesg follows:
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS (AuthenticAMD
586-class) 500 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem = 536440832 (511MB)
avail mem = 511070208 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/71/05, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf/0x1
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 AMD Geode LX rev 0x30
glxsb0 at pci0 dev 1 function 2 AMD Geode LX Crypto rev 0x00: RNG AES
vr0 at pci0 dev 6 function 0 VIA VT6105M RhineIII rev 0x96: irq 11,
address 00:00:24:c9:29:4c
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 7 function 0 VIA VT6105M RhineIII rev 0x96: irq 5,
address 00:00:24:c9:29:4d
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci0 dev 8 function 0 VIA VT6105M RhineIII rev 0x96: irq 9,
address 00:00:24:c9:29:4e
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr3 at pci0 dev 9 function 0 VIA VT6105M RhineIII rev 0x96: irq 12,
address 00:00:24:c9:29:4f
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ral0 at pci0 dev 14 function 0 Ralink RT2561S rev 0x00: irq 10,
address 00:08:a1:b1:99:f3
ral0: MAC/BBP RT2561C, RF RT2527
vendor Ralink, unknown product 0x0601 (class network subclass
miscellaneous, rev 0x00) at pci0 dev 17 function 0 not configured
thia is the mini-pci ^
pcib0 at pci0 dev 20 function 0 AMD CS5536 ISA rev 0x03
pciide0 at pci0 dev 20 function 2 AMD CS5536 IDE rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: SanDisk SDCFH2-4096
wd0: 4-sector PIO, LBA, 3919MB, 8027712 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 AMD CS5536 USB rev 0x02: irq 7,
version 1.0, legacy support
ehci0 at pci0 dev 21 function 1 AMD CS5536 USB rev 0x02: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: AMD EHCI root hub, rev 2.00/1.00, addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio0 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: AMD OHCI root hub, rev 1.00/1.00, addr 1
biomask e1c5 netmask ffe5 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
Any help
Bret
