I've had no problems with an rt2860 in this configuration;
hostname.ral0:
mode 11g mediaopt hostap chan 1 nwid gen wpa \
wpapsk `wpa-psk gen chilledbrains` \
group internal up
(This interface happens to be bridged to an re(4) which is why it
has no address assigned here.)
But adding 'wpaprotos 2 wpagroupcipher ccmp wpaciphers ccmp'
makes the box hang on boot at 'Starting networks'. Alternatively,
specifying those same options with ifconfig immediately wedges
the machine (without a panic or anything). So, I don't use those
options :-)
OpenBSD 4.5-current (GENERIC) #141: Fri May 8 00:09:35 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 335 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 234450944 (223MB)
avail mem = 218312704 (208MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/09/99, BIOS32 rev. 0 @ 0xfb0a0
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf/0xb518
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdb50/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 (Intel 82371SB ISA rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc8000/0x1a00!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
extent `pciio' (0x0 - 0x), flags=0
0xc000 - 0xd01f
0xd400 - 0xd4ff
0xd800 - 0xd807
0xdc00 - 0xdc03
0xe000 - 0xe007
0xe400 - 0xe403
0xe800 - 0xe80f
0xec00 - 0xecff
0xf000 - 0xf00f
0x1 - 0x
extent `pcimem' (0x0 - 0x), flags=0
0x0 - 0x9
0xf - 0xdff
0xe300 - 0xe34100ff
0xe3411000 - 0xe34110ff
0x - 0x
pchb0 at pci0 dev 0 function 0 Intel 82443LX AGP rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe300, size 0x40
ppb0 at pci0 dev 1 function 0 Intel 82443LX AGP rev 0x03
pci1 at ppb0 bus 1
extent `ppb0 pciio' (0x0 - 0x), flags=0
0x0 - 0xbfff
0xd000 - 0x
piixpcib0 at pci0 dev 7 function 0 Intel 82371AB PIIX4 ISA rev 0x01
pciide0 at pci0 dev 7 function 1 Intel 82371AB IDE rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 Intel 82371AB USB rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 Intel 82371AB Power rev 0x01: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC133CL2
spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC66CL2
spdmem2 at iic0 addr 0x52: 32MB SDRAM non-parity PC66CL2
re0 at pci0 dev 8 function 0 Realtek 8169 rev 0x10: RTL8169S (0x0400), irq
10, address 00:09:5b:bc:bd:21
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
pciide1 at pci0 dev 9 function 0 ITExpress IT8212F rev 0x11: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide1: using irq 12 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: WDC WD600BB-00CAA1
wd0: 16-sector PIO, LBA, 57241MB, 117231408 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
re1 at pci0 dev 10 function 0 Realtek 8169 rev 0x10: RTL8169S (0x0400), irq
5, address 00:0f:b5:8a:d2:83
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 0
ral0 at pci0 dev 11 function 0 Ralink RT2860 rev 0x00: irq 11, address
00:1f:1f:3b:14:8d
ral0: MAC/BBP RT2860 (rev 0x0102), RF RT2820 (MIMO 2T3R)
isa0 at piixpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 Intel UHCI root hub rev 1.00/1.00 addr 1
biomask fb4d netmask ff6d ttymask
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
