Re: sli(4) and emulex LPe11000 dual FC card
* Chris Cappuccio ch...@nmedia.net [13 11:41]: Paolo Aglialoro [paol...@gmail.com] wrote: Hello, just tried today on a sparc64 T1000 running 5.4 release the card, but, unfortunately, sli(4) cannot configure it as dmesg says: pci0 at vpci0 Emulex LPe11000 rev 0x02 at pci0 dev 0 function 0 not configured Emulex LPe11000 rev 0x02 at pci0 dev 0 function 1 not configured The card is correctly seen by prom so this is not likely and architecturally-dependent problem: You need to compile a kernel with the sli driver. GENERIC and GENERIC.MP on sparc64 don't include it by default. That driver is incomplete. Even if you compile it in, you're not going anywhere. jim@
Re: sli(4) and emulex LPe11000 dual FC card
Hi Jim, just today I had compiled the kernel (after fiddling with GENERIC and sli_pci.c) with this result: pci0 at vpci0 sli0 at pci0 dev 0 function 0 Emulex LPe11000 rev 0x02: ivec 0x794 sli1 at pci0 dev 0 function 1 Emulex LPe11000 rev 0x02: ivec 0x795 also I have: # pcidump Domain /dev/pci0: 2:0:0: Emulex LPe11000 2:0:1: Emulex LPe11000 Domain /dev/pci1: 2:0:0: ServerWorks PCIE-PCIX 3:4:0: Broadcom BCM5714 3:4:1: Broadcom BCM5714 3:8:0: ServerWorks HT-1000 PCIX 4:1:0: Broadcom BCM5704C 4:1:1: Broadcom BCM5704C 4:2:0: Symbios Logic SAS1064 but haven't tried yet to connect the box to a FC storage, as a colleague should yet give me the correct cable. Now, reading your mail, turned me completely off :((( As far as I get it... I am alone in the desert... or is any light somewhere? On Wed, Nov 13, 2013 at 9:09 PM, Jim Razmus j...@bonetruck.org wrote: * Chris Cappuccio ch...@nmedia.net [13 11:41]: Paolo Aglialoro [paol...@gmail.com] wrote: Hello, just tried today on a sparc64 T1000 running 5.4 release the card, but, unfortunately, sli(4) cannot configure it as dmesg says: pci0 at vpci0 Emulex LPe11000 rev 0x02 at pci0 dev 0 function 0 not configured Emulex LPe11000 rev 0x02 at pci0 dev 0 function 1 not configured The card is correctly seen by prom so this is not likely and architecturally-dependent problem: You need to compile a kernel with the sli driver. GENERIC and GENERIC.MP on sparc64 don't include it by default. That driver is incomplete. Even if you compile it in, you're not going anywhere. jim@
Re: sli(4) and emulex LPe11000 dual FC card
* Paolo Aglialoro paol...@gmail.com [131113 14:37]: Hi Jim, just today I had compiled the kernel (after fiddling with GENERIC and sli_pci.c) with this result: pci0 at vpci0 sli0 at pci0 dev 0 function 0 Emulex LPe11000 rev 0x02: ivec 0x794 sli1 at pci0 dev 0 function 1 Emulex LPe11000 rev 0x02: ivec 0x795 also I have: # pcidump Domain /dev/pci0: 2:0:0: Emulex LPe11000 2:0:1: Emulex LPe11000 Domain /dev/pci1: 2:0:0: ServerWorks PCIE-PCIX 3:4:0: Broadcom BCM5714 3:4:1: Broadcom BCM5714 3:8:0: ServerWorks HT-1000 PCIX 4:1:0: Broadcom BCM5704C 4:1:1: Broadcom BCM5704C 4:2:0: Symbios Logic SAS1064 but haven't tried yet to connect the box to a FC storage, as a colleague should yet give me the correct cable. Now, reading your mail, turned me completely off :((( As far as I get it... I am alone in the desert... or is any light somewhere? Sorry, I don't have any water for you. I started the sli driver many years back with some guidance from dlg@. Checking cvs, I see that was 6 years ago now. Clearly, I never got back to it. To see just how incomplete the driver is, take a look here: http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/ic/sli.c?rev=1.2 Best regards, jim@
sli(4) and emulex LPe11000 dual FC card
Hello, just tried today on a sparc64 T1000 running 5.4 release the card, but, unfortunately, sli(4) cannot configure it as dmesg says: pci0 at vpci0 Emulex LPe11000 rev 0x02 at pci0 dev 0 function 0 not configured Emulex LPe11000 rev 0x02 at pci0 dev 0 function 1 not configured The card is correctly seen by prom so this is not likely and architecturally-dependent problem: SC Alert: Host system has shut down. / SC Alert: Host System has Reset - !!! A8003A Fcode, Copyright (c) 2000-2006 Emulex !!! Version 1.50a9 !!! A8003A Fcode, Copyright (c) 2000-2006 Emulex !!! Version 1.50a9 Sun Fire(TM) T1000, No Keyboard Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.30.4.d, 3968 MB memory available, Serial # any chance to see this working in the future??? Thanks
Re: sli(4) and emulex LPe11000 dual FC card
Paolo Aglialoro [paol...@gmail.com] wrote: Hello, just tried today on a sparc64 T1000 running 5.4 release the card, but, unfortunately, sli(4) cannot configure it as dmesg says: pci0 at vpci0 Emulex LPe11000 rev 0x02 at pci0 dev 0 function 0 not configured Emulex LPe11000 rev 0x02 at pci0 dev 0 function 1 not configured The card is correctly seen by prom so this is not likely and architecturally-dependent problem: You need to compile a kernel with the sli driver. GENERIC and GENERIC.MP on sparc64 don't include it by default.
