Just a heads up, since I can't really provide much more information
than the dmesg output below, but I am consistenly able to lock up
my V100 *hard* just by scp'ing stuff from it.
The first time I experienced the problem, I plugged a serial
console in and had a DDB prompt, but ever since with something
watching the console full-time, I've just gotten a locked-up
machine and no DDB prompt or panic information. Any tips for
making sure I'm able to get either one?
Any help is sincerely appreciated.
-peter
console is /[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL PROTECTED],3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://
www.OpenBSD.org
OpenBSD 4.1 (GENERIC) #1099: Sat Mar 10 19:18:09 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/
GENERIC
total memory = 1073741824
avail memory = 968957952
using 6553 buffers containing 53682176 bytes of memory
bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0
mainbus0 (root): Sun Fire V100 (UltraSPARC-IIe 648MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 3.3) @ 648 MHz, version
0 FPU
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 512K
external (64 b/
l)
psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-0, PCI bus 0
psycho0: dvma map 60000000-7fffffff, iotdb 4d18000-4d98000
pci0 at psycho0
ebus0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"dma" at ebus0 addr 0-ffff ipl 42 not configured
rtc0 at ebus0 addr 70-71: m5819
power0 at ebus0 addr 2000-2007 ipl 35: can't map register space
"SUNW,lomh" at ebus0 addr 8010-8011 ipl 42 not configured
com0 at ebus0 addr 3f8-3ff ipl 43: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 43: ns16550a, 16 byte fifo
"flashprom" at ebus0 addr 0-7ffff not configured
"Acer Labs M7101 Power" rev 0x00 at pci0 dev 3 function 0 not
configured
dc0 at pci0 dev 12 function 0 "Davicom DM9102" rev 0x31: ivec
0x7c6, address 00:
03:ba:2a:92:9c
amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 0
dc1 at pci0 dev 5 function 0 "Davicom DM9102" rev 0x31: ivec 0x7dc,
address 00:0
3:ba:2a:92:9d
amphy1 at dc1 phy 1: DM9102 10/100 PHY, rev. 0
ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03:
ivec 0x7e4, vers
ion 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev
0xc3: DMA, chan
nel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST340016A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DV-28E-B, 1.2A> SCSI0 5/cdrom
removable
wd1 at pciide0 channel 1 drive 1: <ST340016A>
wd1: 16-sector PIO, LBA, 38166MB, 78165360 sectors
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pcons at mainbus0 not configured
No counter-timer -- using %tick at 648MHz as system clock.
root on wd0a
rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
