Re: [mkgmap-dev] additional arcs patch
Hi Gerd, I have tested long distance routing with mkgmap-sort-r3067 too. BaseCamp can create long routes, but they aren't the same as in high precision branch. Similarly like in previous comparisons, I can't tell which results are better. I really appreciate smaller size of img created with high precision branch, but unfortunately I can't use it, because of search problems connected with transliteration. These problems are solved in mkgmap-sort-r3067 or at least I can find addresses in Bulgaria. Could you merge both branches? -- Best regards, Andrzej ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
[mkgmap-dev] Splitter and multiple input-files
Hi Gerd, I discovered a (small) problem with using two inputfiles with splitter. One input-file is planet.osm, the other one is a srtm-files covering only a few areas. If I split an area, which is not covered by the bbox of my srtm-file, splitter wont write any areas.list and so on. Would it be possible to merge the bboxes of the input-files or check, that the required area is coverd at least by one input and not necessarily by all? Henning ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] splitter exception
Thank you Gerd, that was the right point. I have checked the md5 after the download. There it had been ok, but then I copied it to another disc over my own network. Now I checked the used file - and the md5 was wrong. I dont know why. I will have that in mind, may be I get some other problems with the network :-( Many thanks Gert Gesendet: Sonntag, 02. März 2014 um 16:56 Uhr Von: "Gerd Petermann" An: "mkgmap-dev@lists.mkgmap.org.uk" Betreff: Re: [mkgmap-dev] splitter exception Hi Gert, looks like an error in the input file. You may try if osmconvert can read it, if not, you have to download it again :-( Gerd From: thesurve...@wolke7.net To: mkgmap-dev@lists.mkgmap.org.uk Date: Sun, 2 Mar 2014 14:37:36 +0100 Subject: [mkgmap-dev] splitter exception Hi all, this morning I downloaded a new Europe extract (europe-140301.osm.pbf) from geofabrik. I tried to split it with splitter and I was surprised that I got an error. As I had splitter r314 I updated to splitter r317. But the error still exists. I have no idea why this happens and what i could do now. Can somebody help? here the messages from splitter: Splitter version 317 compiled 2014-02-27T07:09:08+ boundary-tags=use-exclude-list cache= description=Europa geonames-file= keep-complete=true mapid=5001 max-areas=200 max-nodes=130 max-threads=4 (auto) mixed=false no-trim=true output=pbf output-dir= overlap=auto polygon-file= precomp-sea=M:\sea\sea_20131101.zip problem-file= problem-report=problem-report.txt resolution=13 split-file= status-freq=600 stop-after=dist write-kml=Europa_areas.kml Elapsed time: 0s Memory: Current 121MB (3MB used, 118MB free) Max 5333MB Time started: Sun Mar 02 14:09:08 CET 2014 Map is being split for resolution 13: - area boundaries are aligned to 0x800 map units (0.0439453125 degrees) - areas are multiples of 0x800 map units wide and high Processing M:\osm\europe-140301.osm.pbf Bounding box -34.4929604 30.81659 45.0 81.472991 10.000.000 nodes processed... id=47781350 20.000.000 nodes processed... id=251221054 30.000.000 nodes processed... id=273966911 40.000.000 nodes processed... id=293119349 50.000.000 nodes processed... id=314832015 60.000.000 nodes processed... id=339039424 70.000.000 nodes processed... id=369855046 80.000.000 nodes processed... id=412854410 90.000.000 nodes processed... id=432592830 100.000.000 nodes processed... id=478684987 110.000.000 nodes processed... id=517376699 120.000.000 nodes processed... id=537539609 130.000.000 nodes processed... id=579050562 140.000.000 nodes processed... id=609111215 150.000.000 nodes processed... id=639674573 160.000.000 nodes processed... id=668173114 170.000.000 nodes processed... id=687843310 180.000.000 nodes processed... id=713935993 190.000.000 nodes processed... id=739436447 Exception in thread "main" java.lang.AssertionError at crosby.binary.file.FileBlockPosition.parseData(FileBlockPosition.java:62) at crosby.binary.file.FileBlockHead.readContents(FileBlockHead.java:95) at crosby.binary.file.FileBlock.process(FileBlock.java:135) at crosby.binary.file.BlockInputStream.process(BlockInputStream.java:34) at uk.me.parabola.splitter.Main.processMap(Main.java:828) at uk.me.parabola.splitter.Main.calculateAreas(Main.java:502) at uk.me.parabola.splitter.Main.split(Main.java:234) at uk.me.parabola.splitter.Main.start(Main.java:165) at uk.me.parabola.splitter.Main.main(Main.java:149) Many thanks Gert ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] splitter exception
Hi Gert, looks like an error in the input file. You may try if osmconvert can read it, if not, you have to download it again :-( Gerd From: thesurve...@wolke7.net To: mkgmap-dev@lists.mkgmap.org.uk Date: Sun, 2 Mar 2014 14:37:36 +0100 Subject: [mkgmap-dev] splitter exception Hi all, this morning I downloaded a new Europe extract (europe-140301.osm.pbf) from geofabrik. I tried to split it with splitter and I was surprised that I got an error. As I had splitter r314 I updated to splitter r317. But the error still exists. I have no idea why this happens and what i could do now. Can somebody help? here the messages from splitter: Splitter version 317 compiled 2014-02-27T07:09:08+ boundary-tags=use-exclude-list cache= description=Europa geonames-file= keep-complete=true mapid=5001 max-areas=200 max-nodes=130 max-threads=4 (auto) mixed=false no-trim=true output=pbf output-dir= overlap=auto polygon-file= precomp-sea=M:\sea\sea_20131101.zip problem-file= problem-report=problem-report.txt resolution=13 split-file= status-freq=600 stop-after=dist write-kml=Europa_areas.kml Elapsed time: 0s Memory: Current 121MB (3MB used, 118MB free) Max 5333MB Time started: Sun Mar 02 14:09:08 CET 2014 Map is being split for resolution 13: - area boundaries are aligned to 0x800 map units (0.0439453125 degrees) - areas are multiples of 0x800 map units wide and high Processing M:\osm\europe-140301.osm.pbf Bounding box -34.4929604 30.81659 45.0 81.472991 10.000.000 nodes processed... id=47781350 20.000.000 nodes processed... id=251221054 30.000.000 nodes processed... id=273966911 40.000.000 nodes processed... id=293119349 50.000.000 nodes processed... id=314832015 60.000.000 nodes processed... id=339039424 70.000.000 nodes processed... id=369855046 80.000.000 nodes processed... id=412854410 90.000.000 nodes processed... id=432592830 100.000.000 nodes processed... id=478684987 110.000.000 nodes processed... id=517376699 120.000.000 nodes processed... id=537539609 130.000.000 nodes processed... id=579050562 140.000.000 nodes processed... id=609111215 150.000.000 nodes processed... id=639674573 160.000.000 nodes processed... id=668173114 170.000.000 nodes processed... id=687843310 180.000.000 nodes processed... id=713935993 190.000.000 nodes processed... id=739436447 Exception in thread "main" java.lang.AssertionError at crosby.binary.file.FileBlockPosition.parseData(FileBlockPosition.java:62) at crosby.binary.file.FileBlockHead.readContents(FileBlockHead.java:95) at crosby.binary.file.FileBlock.process(FileBlock.java:135) at crosby.binary.file.BlockInputStream.process(BlockInputStream.java:34) at uk.me.parabola.splitter.Main.processMap(Main.java:828) at uk.me.parabola.splitter.Main.calculateAreas(Main.java:502) at uk.me.parabola.splitter.Main.split(Main.java:234) at uk.me.parabola.splitter.Main.start(Main.java:165) at uk.me.parabola.splitter.Main.main(Main.java:149) Many thanks Gert ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
[mkgmap-dev] splitter exception
Hi all, this morning I downloaded a new Europe extract (europe-140301.osm.pbf) from geofabrik. I tried to split it with splitter and I was surprised that I got an error. As I had splitter r314 I updated to splitter r317. But the error still exists. I have no idea why this happens and what i could do now. Can somebody help? here the messages from splitter: Splitter version 317 compiled 2014-02-27T07:09:08+ boundary-tags=use-exclude-list cache= description=Europa geonames-file= keep-complete=true mapid=5001 max-areas=200 max-nodes=130 max-threads=4 (auto) mixed=false no-trim=true output=pbf output-dir= overlap=auto polygon-file= precomp-sea=M:\sea\sea_20131101.zip problem-file= problem-report=problem-report.txt resolution=13 split-file= status-freq=600 stop-after=dist write-kml=Europa_areas.kml Elapsed time: 0s Memory: Current 121MB (3MB used, 118MB free) Max 5333MB Time started: Sun Mar 02 14:09:08 CET 2014 Map is being split for resolution 13: - area boundaries are aligned to 0x800 map units (0.0439453125 degrees) - areas are multiples of 0x800 map units wide and high Processing M:\osm\europe-140301.osm.pbf Bounding box -34.4929604 30.81659 45.0 81.472991 10.000.000 nodes processed... id=47781350 20.000.000 nodes processed... id=251221054 30.000.000 nodes processed... id=273966911 40.000.000 nodes processed... id=293119349 50.000.000 nodes processed... id=314832015 60.000.000 nodes processed... id=339039424 70.000.000 nodes processed... id=369855046 80.000.000 nodes processed... id=412854410 90.000.000 nodes processed... id=432592830 100.000.000 nodes processed... id=478684987 110.000.000 nodes processed... id=517376699 120.000.000 nodes processed... id=537539609 130.000.000 nodes processed... id=579050562 140.000.000 nodes processed... id=609111215 150.000.000 nodes processed... id=639674573 160.000.000 nodes processed... id=668173114 170.000.000 nodes processed... id=687843310 180.000.000 nodes processed... id=713935993 190.000.000 nodes processed... id=739436447 Exception in thread "main" java.lang.AssertionError at crosby.binary.file.FileBlockPosition.parseData(FileBlockPosition.java:62) at crosby.binary.file.FileBlockHead.readContents(FileBlockHead.java:95) at crosby.binary.file.FileBlock.process(FileBlock.java:135) at crosby.binary.file.BlockInputStream.process(BlockInputStream.java:34) at uk.me.parabola.splitter.Main.processMap(Main.java:828) at uk.me.parabola.splitter.Main.calculateAreas(Main.java:502) at uk.me.parabola.splitter.Main.split(Main.java:234) at uk.me.parabola.splitter.Main.start(Main.java:165) at uk.me.parabola.splitter.Main.main(Main.java:149) Many thanks Gert ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] ontario canada maps
Hi Stephen, I have no idea what you want to achive with that. If you like, post a link to the *.o5m file that produces the error message and the style files so that I can reproduce the problem. Gerd Date: Sun, 2 Mar 2014 20:27:38 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps i was thinking , maybe if i download another pre compiled map of the area then used gmap tool to de compile into a typ file do you think this could partly solve my prob ? stephen On Sun, Mar 2, 2014 at 7:26 PM, Gerd Petermann wrote: Hi Stephen, I guess it is something special in your style, I can't reproduce the problem with the default style. The values 90.000 / 160.000 are extreme small, so the problem seems to be that a very small area contains a large number of POI. I saw a similar problem a few weeks ago with a style that assigned POI to zip codes and buildings which contained hundrets of PO-boxes with different zip codes. Gerd Date: Sun, 2 Mar 2014 19:21:50 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps due to the number of points in the map however , i have not had many issues with the other maps i create with the same program i have r3072 , and splitter 317 installed On Sun, Mar 2, 2014 at 7:18 PM, Gerd Petermann wrote: Hi Steve, you used 90.000, why do you think that 160.000 will help? Gerd Date: Sun, 2 Mar 2014 19:13:46 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps running it now with 160,000 nodes and here is the basic args file On Sun, Mar 2, 2014 at 7:07 PM, Gerd Petermann wrote: Hi Stephen, sorry, forget my last post, order of args doesn't seem to matter in splitter. I was not able to reproduce the problem with the default style, mkgmap r3072 (trunk) and splitter r317. I used max-nodes=160 and see no problem. So, please make sure that you use the latest versions of the programs and if that doesn't help, please send more details regarding the content of ..\bin\template_basic.args Gerd Date: Sun, 2 Mar 2014 18:28:21 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps here is the batch file i use On Sun, Mar 2, 2014 at 6:16 PM, Gerd Petermann wrote: Hi Stephen, is the OSM file the only input? Or do you mix it with something else? Gerd Date: Sun, 2 Mar 2014 18:13:03 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: [mkgmap-dev] ontario canada maps while the splitter worked ok the compiler has spat the dummy error msg is this area to small to split reduce point number then i get , ( point number to big) --max-areas - 100 --max-nodes = 9 any ideas? stephen ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] ontario canada maps
i was thinking , maybe if i download another pre compiled map of the area then used gmap tool to de compile into a typ file do you think this could partly solve my prob ? stephen On Sun, Mar 2, 2014 at 7:26 PM, Gerd Petermann < gpetermann_muenc...@hotmail.com> wrote: > Hi Stephen, > > I guess it is something special in your style, I can't reproduce the > problem with the default style. > > The values 90.000 / 160.000 <%20160.000> are extreme small, so the > problem seems to be that a very small > area contains a large number of POI. I saw a similar problem a few weeks > ago with a > style that assigned POI to zip codes and buildings which contained > hundrets of PO-boxes with different > zip codes. > > Gerd > > -- > Date: Sun, 2 Mar 2014 19:21:50 +1000 > From: steve.sgalow...@gmail.com > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: Re: [mkgmap-dev] ontario canada maps > > due to the number of points in the map > > however , i have not had many issues with the other maps i create > > with the same program > i have r3072 , and splitter 317 installed > > > > > On Sun, Mar 2, 2014 at 7:18 PM, Gerd Petermann < > gpetermann_muenc...@hotmail.com> wrote: > > Hi Steve, > > you used 90.000, why do you think that 160.000 will help? > > Gerd > > -- > Date: Sun, 2 Mar 2014 19:13:46 +1000 > From: steve.sgalow...@gmail.com > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: Re: [mkgmap-dev] ontario canada maps > > running it now with 160,000 nodes > and here is the basic args file > > > > On Sun, Mar 2, 2014 at 7:07 PM, Gerd Petermann < > gpetermann_muenc...@hotmail.com> wrote: > > Hi Stephen, > > sorry, forget my last post, order of args doesn't seem to matter in > splitter. > I was not able to reproduce the problem with the default style, mkgmap > r3072 (trunk) and splitter r317. > I used max-nodes=160 and see no problem. > > So, please make sure that you use the latest versions of the programs > and if that doesn't help, please send more details regarding the content > of ..\bin\template_basic.args > > Gerd > > > -- > Date: Sun, 2 Mar 2014 18:28:21 +1000 > From: steve.sgalow...@gmail.com > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: Re: [mkgmap-dev] ontario canada maps > > here is the batch file i use > > > On Sun, Mar 2, 2014 at 6:16 PM, Gerd Petermann < > gpetermann_muenc...@hotmail.com> wrote: > > Hi Stephen, > > is the OSM file the only input? Or do you mix it with something else? > > Gerd > > -- > Date: Sun, 2 Mar 2014 18:13:03 +1000 > From: steve.sgalow...@gmail.com > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: [mkgmap-dev] ontario canada maps > > while the splitter worked ok > the compiler has spat the dummy > > error msg is this > > area to small to split reduce point number > then i get , ( point number to big) > > --max-areas - 100 > --max-nodes = 9 > > any ideas? > > stephen > > > ___ mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > > > ___ mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > > > ___ mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > > > ___ mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] ontario canada maps
Hi Stephen, I guess it is something special in your style, I can't reproduce the problem with the default style. The values 90.000 / 160.000 are extreme small, so the problem seems to be that a very small area contains a large number of POI. I saw a similar problem a few weeks ago with a style that assigned POI to zip codes and buildings which contained hundrets of PO-boxes with different zip codes. Gerd Date: Sun, 2 Mar 2014 19:21:50 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps due to the number of points in the map however , i have not had many issues with the other maps i create with the same program i have r3072 , and splitter 317 installed On Sun, Mar 2, 2014 at 7:18 PM, Gerd Petermann wrote: Hi Steve, you used 90.000, why do you think that 160.000 will help? Gerd Date: Sun, 2 Mar 2014 19:13:46 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps running it now with 160,000 nodes and here is the basic args file On Sun, Mar 2, 2014 at 7:07 PM, Gerd Petermann wrote: Hi Stephen, sorry, forget my last post, order of args doesn't seem to matter in splitter. I was not able to reproduce the problem with the default style, mkgmap r3072 (trunk) and splitter r317. I used max-nodes=160 and see no problem. So, please make sure that you use the latest versions of the programs and if that doesn't help, please send more details regarding the content of ..\bin\template_basic.args Gerd Date: Sun, 2 Mar 2014 18:28:21 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps here is the batch file i use On Sun, Mar 2, 2014 at 6:16 PM, Gerd Petermann wrote: Hi Stephen, is the OSM file the only input? Or do you mix it with something else? Gerd Date: Sun, 2 Mar 2014 18:13:03 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: [mkgmap-dev] ontario canada maps while the splitter worked ok the compiler has spat the dummy error msg is this area to small to split reduce point number then i get , ( point number to big) --max-areas - 100 --max-nodes = 9 any ideas? stephen ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] ontario canada maps
due to the number of points in the map however , i have not had many issues with the other maps i create with the same program i have r3072 , and splitter 317 installed On Sun, Mar 2, 2014 at 7:18 PM, Gerd Petermann < gpetermann_muenc...@hotmail.com> wrote: > Hi Steve, > > you used 90.000, why do you think that 160.000 will help? > > Gerd > > -- > Date: Sun, 2 Mar 2014 19:13:46 +1000 > From: steve.sgalow...@gmail.com > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: Re: [mkgmap-dev] ontario canada maps > > running it now with 160,000 nodes > and here is the basic args file > > > > On Sun, Mar 2, 2014 at 7:07 PM, Gerd Petermann < > gpetermann_muenc...@hotmail.com> wrote: > > Hi Stephen, > > sorry, forget my last post, order of args doesn't seem to matter in > splitter. > I was not able to reproduce the problem with the default style, mkgmap > r3072 (trunk) and splitter r317. > I used max-nodes=160 and see no problem. > > So, please make sure that you use the latest versions of the programs > and if that doesn't help, please send more details regarding the content > of ..\bin\template_basic.args > > Gerd > > > -- > Date: Sun, 2 Mar 2014 18:28:21 +1000 > From: steve.sgalow...@gmail.com > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: Re: [mkgmap-dev] ontario canada maps > > here is the batch file i use > > > On Sun, Mar 2, 2014 at 6:16 PM, Gerd Petermann < > gpetermann_muenc...@hotmail.com> wrote: > > Hi Stephen, > > is the OSM file the only input? Or do you mix it with something else? > > Gerd > > -- > Date: Sun, 2 Mar 2014 18:13:03 +1000 > From: steve.sgalow...@gmail.com > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: [mkgmap-dev] ontario canada maps > > while the splitter worked ok > the compiler has spat the dummy > > error msg is this > > area to small to split reduce point number > then i get , ( point number to big) > > --max-areas - 100 > --max-nodes = 9 > > any ideas? > > stephen > > > ___ mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > > > ___ mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > > > ___ mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] ontario canada maps
Hi Steve, you used 90.000, why do you think that 160.000 will help? Gerd Date: Sun, 2 Mar 2014 19:13:46 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps running it now with 160,000 nodes and here is the basic args file On Sun, Mar 2, 2014 at 7:07 PM, Gerd Petermann wrote: Hi Stephen, sorry, forget my last post, order of args doesn't seem to matter in splitter. I was not able to reproduce the problem with the default style, mkgmap r3072 (trunk) and splitter r317. I used max-nodes=160 and see no problem. So, please make sure that you use the latest versions of the programs and if that doesn't help, please send more details regarding the content of ..\bin\template_basic.args Gerd Date: Sun, 2 Mar 2014 18:28:21 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps here is the batch file i use On Sun, Mar 2, 2014 at 6:16 PM, Gerd Petermann wrote: Hi Stephen, is the OSM file the only input? Or do you mix it with something else? Gerd Date: Sun, 2 Mar 2014 18:13:03 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: [mkgmap-dev] ontario canada maps while the splitter worked ok the compiler has spat the dummy error msg is this area to small to split reduce point number then i get , ( point number to big) --max-areas - 100 --max-nodes = 9 any ideas? stephen ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] ontario canada maps
running it now with 160,000 nodes and here is the basic args file On Sun, Mar 2, 2014 at 7:07 PM, Gerd Petermann < gpetermann_muenc...@hotmail.com> wrote: > Hi Stephen, > > sorry, forget my last post, order of args doesn't seem to matter in > splitter. > I was not able to reproduce the problem with the default style, mkgmap > r3072 (trunk) and splitter r317. > I used max-nodes=160 and see no problem. > > So, please make sure that you use the latest versions of the programs > and if that doesn't help, please send more details regarding the content > of ..\bin\template_basic.args > > Gerd > > > -- > Date: Sun, 2 Mar 2014 18:28:21 +1000 > From: steve.sgalow...@gmail.com > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: Re: [mkgmap-dev] ontario canada maps > > here is the batch file i use > > > On Sun, Mar 2, 2014 at 6:16 PM, Gerd Petermann < > gpetermann_muenc...@hotmail.com> wrote: > > Hi Stephen, > > is the OSM file the only input? Or do you mix it with something else? > > Gerd > > -- > Date: Sun, 2 Mar 2014 18:13:03 +1000 > From: steve.sgalow...@gmail.com > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: [mkgmap-dev] ontario canada maps > > while the splitter worked ok > the compiler has spat the dummy > > error msg is this > > area to small to split reduce point number > then i get , ( point number to big) > > --max-areas - 100 > --max-nodes = 9 > > any ideas? > > stephen > > > ___ mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > > > ___ mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > template_basic.args Description: Binary data ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] ontario canada maps
Hi Stephen, sorry, forget my last post, order of args doesn't seem to matter in splitter. I was not able to reproduce the problem with the default style, mkgmap r3072 (trunk) and splitter r317. I used max-nodes=160 and see no problem. So, please make sure that you use the latest versions of the programs and if that doesn't help, please send more details regarding the content of ..\bin\template_basic.args Gerd Date: Sun, 2 Mar 2014 18:28:21 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps here is the batch file i use On Sun, Mar 2, 2014 at 6:16 PM, Gerd Petermann wrote: Hi Stephen, is the OSM file the only input? Or do you mix it with something else? Gerd Date: Sun, 2 Mar 2014 18:13:03 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: [mkgmap-dev] ontario canada maps while the splitter worked ok the compiler has spat the dummy error msg is this area to small to split reduce point number then i get , ( point number to big) --max-areas - 100 --max-nodes = 9 any ideas? stephen ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] ontario canada maps
Hi Stephen, your batch places the parameters like --max-nodes after the input file. Please check if splitter uses the defaults. If so, place these parms before the input file ..\OSM-Data\%osmfile. Gerd Date: Sun, 2 Mar 2014 18:28:21 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] ontario canada maps here is the batch file i use On Sun, Mar 2, 2014 at 6:16 PM, Gerd Petermann wrote: Hi Stephen, is the OSM file the only input? Or do you mix it with something else? Gerd Date: Sun, 2 Mar 2014 18:13:03 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: [mkgmap-dev] ontario canada maps while the splitter worked ok the compiler has spat the dummy error msg is this area to small to split reduce point number then i get , ( point number to big) --max-areas - 100 --max-nodes = 9 any ideas? stephen ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] ontario canada maps
here is the batch file i use On Sun, Mar 2, 2014 at 6:16 PM, Gerd Petermann < gpetermann_muenc...@hotmail.com> wrote: > Hi Stephen, > > is the OSM file the only input? Or do you mix it with something else? > > Gerd > > -- > Date: Sun, 2 Mar 2014 18:13:03 +1000 > From: steve.sgalow...@gmail.com > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: [mkgmap-dev] ontario canada maps > > while the splitter worked ok > the compiler has spat the dummy > > error msg is this > > area to small to split reduce point number > then i get , ( point number to big) > > --max-areas - 100 > --max-nodes = 9 > > any ideas? > > stephen > > > ___ mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > ontario-canada - Notepad.pdf Description: Adobe PDF document ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] ontario canada maps
Hi Stephen, is the OSM file the only input? Or do you mix it with something else? Gerd Date: Sun, 2 Mar 2014 18:13:03 +1000 From: steve.sgalow...@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: [mkgmap-dev] ontario canada maps while the splitter worked ok the compiler has spat the dummy error msg is this area to small to split reduce point number then i get , ( point number to big) --max-areas - 100 --max-nodes = 9 any ideas? stephen ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
[mkgmap-dev] ontario canada maps
while the splitter worked ok the compiler has spat the dummy error msg is this area to small to split reduce point number then i get , ( point number to big) --max-areas - 100 --max-nodes = 9 any ideas? stephen ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev