Re: No IP address for a successful connection on LTE modem
Spot on! This was exactly the problem! Thank you. On 3/3/24 10:07, Aleksander Morgado wrote: On Wed, Feb 14, 2024 at 11:21 AM Garfield Watkins wrote: I think what confused me is that without the ModemManager i.e. using just cgact=1,1 to manually connect, i suddenly got an ip address assigned to the network interface provided by the modem. I thought it was NetworkManager running its dhcp client on that interface after getting a dhcp discover ? from the modem ? (i'm not too sure about how dhcp goes about its business) Anyway i have now tried to use Network Manager to setup and connect but now am getting the following message: modem-broadband[ttyUSB0]: failed to connect 'meig': Connection requested both IPv4 and IPv6 but dual-stack addressing is unsupported by the modem. and disabling ipv6 I get: failed to connect 'meig': Connection requested IPv4 but IPv4 is unsupported by the modem. Any idea where to start debugging that ? The "SupportedIpFamilies" property in the Modem interface is probably being reported empty?
Re: No IP address for a successful connection on LTE modem
On Wed, Feb 14, 2024 at 11:21 AM Garfield Watkins wrote: > > I think what confused me is that without the ModemManager i.e. using just > cgact=1,1 to manually connect, i suddenly got an ip address assigned to the > network interface provided by the modem. I thought it was NetworkManager > running its dhcp client on that interface after getting a dhcp discover ? > from the modem ? (i'm not too sure about how dhcp goes about its business) > > Anyway i have now tried to use Network Manager to setup and connect but now > am getting the following message: > > modem-broadband[ttyUSB0]: failed to connect 'meig': Connection requested both > IPv4 and IPv6 but dual-stack addressing is unsupported by the modem. > > and disabling ipv6 I get: > > failed to connect 'meig': Connection requested IPv4 but IPv4 is unsupported > by the modem. > > Any idea where to start debugging that ? > The "SupportedIpFamilies" property in the Modem interface is probably being reported empty? -- Aleksander
Re: No IP address for a successful connection on LTE modem
I think what confused me is that without the ModemManager i.e. using just cgact=1,1 to manually connect, i suddenly got an ip address assigned to the network interface provided by the modem. I thought it was NetworkManager running its dhcp client on that interface after getting a dhcp discover ? from the modem ? (i'm not too sure about how dhcp goes about its business) Anyway i have now tried to use Network Manager to setup and connect but now am getting the following message: modem-broadband[ttyUSB0]: failed to connect 'meig': Connection requested both IPv4 and IPv6 but dual-stack addressing is unsupported by the modem. and disabling ipv6 I get: failed to connect 'meig': Connection requested IPv4 but IPv4 is unsupported by the modem. Any idea where to start debugging that ? On 2/14/24 11:24, Aleksander Morgado wrote: Hey! On Tue, Feb 13, 2024 at 1:49 PM Garfield Watkins wrote: Did you connect the modem using NetworkManager (e.g. using nmcli) or did you connect the modem using mmcli? I see where you are going with this. It seems I expected more of the interaction between the ModemManager and Network Manager . To answer your question, no I have only used mmcli. Let me try the process with nmcli. :) NM only processes the connections that have been started via NM. There's a fundamental reason for that, which is that all the network-specific routing is done at NM level, MM knows nothing about it. In order for NM to know how to route traffic to through the LTE connection, it needs to use its own connection settings.
Re: No IP address for a successful connection on LTE modem
Hey! On Tue, Feb 13, 2024 at 1:49 PM Garfield Watkins wrote: > > Did you connect the modem using NetworkManager (e.g. using nmcli) or > did you connect the modem using mmcli? > > I see where you are going with this. It seems I expected more of the > interaction between the ModemManager and Network Manager . To answer your > question, no I have only used mmcli. Let me try the process with nmcli. > :) NM only processes the connections that have been started via NM. There's a fundamental reason for that, which is that all the network-specific routing is done at NM level, MM knows nothing about it. In order for NM to know how to route traffic to through the LTE connection, it needs to use its own connection settings. -- Aleksander
Re: No IP address for a successful connection on LTE modem
Did you connect the modem using NetworkManager (e.g. using nmcli) or did you connect the modem using mmcli? I see where you are going with this. It seems I expected more of the interaction between the ModemManager and Network Manager . To answer your question, no I have only used mmcli. Let me try the process with nmcli. On 2/13/24 14:43, Aleksander Morgado wrote: Hey, On Tue, Feb 13, 2024 at 1:18 PM Garfield Watkins wrote: Bearer 0 is the initial default bearer. Bearer 1 is the connected bearer Output from mmcli -b 1 is: - General|path: /org/freedesktop/ModemManager1/Bearer/1 |type: default - Status | connected: yes | suspended: no | multiplexed: no | interface: enp0s20f0u2 | ip timeout: 20 | profile id: 1 - Properties | apn: internet | roaming: allowed | ip type: ipv4 - IPv4 configuration | method: dhcp | prefix: 0 - Statistics | start date: 2024-02-13T12:08:31Z |attempts: 1 Please note ModemManager is not responsible for running the DHCP client in the net interface, so if your plugin is reporting "dhcp" IP method in the connected bearer settings (in your get_ip_config_3gpp() method), then whoever is the network management layer on top of ModemManager would be the one in charge of running DHCP client. I have NetworkManager running. I was under the assumption that it would automatically run its dhcp client on the interface. It seems to do this when I manually issue AT+CGACT=1,1. Its only when running under ModemManager that nothing seems to happen, in fact I have tried to run dhclient enp0s20f0u2 and only then do i get an ip address. Did you connect the modem using NetworkManager (e.g. using nmcli) or did you connect the modem using mmcli?
Re: No IP address for a successful connection on LTE modem
Hey, On Tue, Feb 13, 2024 at 1:18 PM Garfield Watkins wrote: > > Bearer 0 is the initial default bearer. > > Bearer 1 is the connected bearer > > Output from mmcli -b 1 is: > > - > General|path: /org/freedesktop/ModemManager1/Bearer/1 > |type: default > - > Status | connected: yes > | suspended: no > | multiplexed: no > | interface: enp0s20f0u2 > | ip timeout: 20 > | profile id: 1 > - > Properties | apn: internet > | roaming: allowed > | ip type: ipv4 > - > IPv4 configuration | method: dhcp > | prefix: 0 > - > Statistics | start date: 2024-02-13T12:08:31Z > |attempts: 1 > > Please note ModemManager is not responsible for running the DHCP > client in the net interface, so if your plugin is reporting "dhcp" IP > method in the connected bearer settings (in your get_ip_config_3gpp() > method), then whoever is the network management layer on top of > ModemManager would be the one in charge of running DHCP client. > > I have NetworkManager running. I was under the assumption that it would > automatically run its dhcp client on the interface. It seems to do this when > I manually issue AT+CGACT=1,1. Its only when running under ModemManager that > nothing seems to happen, in fact I have tried to run dhclient enp0s20f0u2 and > only then do i get an ip address. > Did you connect the modem using NetworkManager (e.g. using nmcli) or did you connect the modem using mmcli? -- Aleksander
Re: No IP address for a successful connection on LTE modem
Bearer 0 is the initial default bearer. Bearer 1 is the connected bearer Output from mmcli -b 1 is: - General | path: /org/freedesktop/ModemManager1/Bearer/1 | type: default - Status | connected: yes | suspended: no | multiplexed: no | interface: enp0s20f0u2 | ip timeout: 20 | profile id: 1 - Properties | apn: internet | roaming: allowed | ip type: ipv4 - IPv4 configuration | method: dhcp | prefix: 0 - Statistics | start date: 2024-02-13T12:08:31Z | attempts: 1 Please note ModemManager is not responsible for running the DHCP client in the net interface, so if your plugin is reporting "dhcp" IP method in the connected bearer settings (in your get_ip_config_3gpp() method), then whoever is the network management layer on top of ModemManager would be the one in charge of running DHCP client. I have NetworkManager running. I was under the assumption that it would automatically run its dhcp client on the interface. It seems to do this when I manually issue AT+CGACT=1,1. Its only when running under ModemManager that nothing seems to happen, in fact I have tried to run dhclient enp0s20f0u2 and only then do i get an ip address. On 2/13/24 14:00, Aleksander Morgado wrote: Hey, On Mon, Feb 12, 2024 at 9:37 AM Garfield Watkins wrote: I have created a plugin for an LTE modem. This modem exposes 1 AT command port (e.g. ttyUSB0) and one ethernet port via usb (cdc_ether). When the modem is inserted via USB, the kernel enumerates some serial ports(ttyUSB0 -> ttyUSB7) and a network interface (enp0s20f0u1) The modem establishes a default bearer on network registration and to establish a data network connection I need to create a pdp context (AT+CGDCONT) with an APN and thereafter activate it with AT+CGACT=1,1 The modem, which is configured in router mode responds by activating its internal dhcp server causing network managers dhcp client to work its magic and eventually configure the ethernet port with all the info it needs (gateways, dns servers, ip address etc). This same process is essentially performed by my plugin and yet no IP address get assigned to the ethernet adapter exposed by the modem. Why could this be happening ? My plugin, specifically the bearer interface implements the folloiwing: broadband_bearer_class->dial_3gpp = dial_3gpp; broadband_bearer_class->dial_3gpp_finish = dial_3gpp_finish; broadband_bearer_class->disconnect_3gpp = disconnect_3gpp; broadband_bearer_class->disconnect_3gpp_finish = disconnect_3gpp_finish; broadband_bearer_class->get_ip_config_3gpp = get_ip_config_3gpp; broadband_bearer_class->get_ip_config_3gpp_finish = get_ip_config_3gpp_finish; Please note ModemManager is not responsible for running the DHCP client in the net interface, so if your plugin is reporting "dhcp" IP method in the connected bearer settings (in your get_ip_config_3gpp() method), then whoever is the network management layer on top of ModemManager would be the one in charge of running DHCP client. What's the output of "mmcli -b 0" (assuming 0 is the connected bearer object) once you perform the modem connection?
Re: No IP address for a successful connection on LTE modem
Hey, On Mon, Feb 12, 2024 at 9:37 AM Garfield Watkins wrote: > > I have created a plugin for an LTE modem. This modem exposes 1 AT command > port (e.g. ttyUSB0) and one ethernet port via usb (cdc_ether). > > When the modem is inserted via USB, the kernel enumerates some serial > ports(ttyUSB0 -> ttyUSB7) and a network interface (enp0s20f0u1) > > The modem establishes a default bearer on network registration and to > establish a data network connection I need to create a pdp context > (AT+CGDCONT) with an APN and thereafter activate it with AT+CGACT=1,1 > > The modem, which is configured in router mode responds by activating its > internal dhcp server causing network managers dhcp client to work its magic > and eventually configure the ethernet port with all the info it needs > (gateways, dns servers, ip address etc). > > > This same process is essentially performed by my plugin and yet no IP address > get assigned to the ethernet adapter exposed by the modem. > > Why could this be happening ? > > My plugin, specifically the bearer interface implements the folloiwing: > > broadband_bearer_class->dial_3gpp = dial_3gpp; > broadband_bearer_class->dial_3gpp_finish = dial_3gpp_finish; > broadband_bearer_class->disconnect_3gpp = disconnect_3gpp; > broadband_bearer_class->disconnect_3gpp_finish = disconnect_3gpp_finish; > broadband_bearer_class->get_ip_config_3gpp = get_ip_config_3gpp; > broadband_bearer_class->get_ip_config_3gpp_finish = get_ip_config_3gpp_finish; Please note ModemManager is not responsible for running the DHCP client in the net interface, so if your plugin is reporting "dhcp" IP method in the connected bearer settings (in your get_ip_config_3gpp() method), then whoever is the network management layer on top of ModemManager would be the one in charge of running DHCP client. What's the output of "mmcli -b 0" (assuming 0 is the connected bearer object) once you perform the modem connection? -- Aleksander
No IP address for a successful connection on LTE modem
Sorry, last message was in html format I have created a plugin for an LTE modem. This modem exposes 1 AT command port (e.g. ttyUSB0) and one ethernet port via usb (cdc_ether). When the modem is inserted via USB, the kernel enumerates some serial ports(ttyUSB0 -> ttyUSB7) and a network interface (enp0s20f0u1) The modem establishes a default bearer on network registration and to establish a data network connection I need to create a pdp context (AT+CGDCONT) with an APN and thereafter activate it with AT+CGACT=1,1 The modem, which is configured in router mode responds by activating its internal dhcp server causing network managers dhcp client to work its magic and eventually configure the ethernet port with all the info it needs (gateways, dns servers, ip address etc). This same process is essentially performed by my plugin and yet no IP address get assigned to the ethernet adapter exposed by the modem. Why could this be happening ? My plugin, specifically the bearer interface implements the folloiwing: broadband_bearer_class->dial_3gpp = dial_3gpp; broadband_bearer_class->dial_3gpp_finish = dial_3gpp_finish; broadband_bearer_class->disconnect_3gpp = disconnect_3gpp; broadband_bearer_class->disconnect_3gpp_finish = disconnect_3gpp_finish; broadband_bearer_class->get_ip_config_3gpp = get_ip_config_3gpp; broadband_bearer_class->get_ip_config_3gpp_finish = get_ip_config_3gpp_finish; Regards
No IP address for a successful connection on LTE modem
I have created a plugin for an LTE modem. This modem exposes 1 AT command port (e.g. ttyUSB0) and one ethernet port via usb (cdc_ether). When the modem is inserted via USB, the kernel enumerates some serial ports(ttyUSB0 -> ttyUSB7) and a network interface (enp0s20f0u1) The modem establishes a default bearer on network registration and to establish a data network connection I need to create a pdp context (AT+CGDCONT) with an APN and thereafter activate it with AT+CGACT=1,1 The modem, which is configured in router mode responds by activating its internal dhcp server causing network managers dhcp client to work its magic and eventually configure the ethernet port with all the info it needs (gateways, dns servers, ip address etc). This same process is essentially performed by my plugin and yet no IP address get assigned to the ethernet adapter exposed by the modem. Why could this be happening ? My plugin, specifically the bearer interface implements the folloiwing: broadband_bearer_class->dial_3gpp = dial_3gpp;broadband_bearer_class->dial_3gpp_finish = dial_3gpp_finish;broadband_bearer_class->disconnect_3gpp = disconnect_3gpp;broadband_bearer_class->disconnect_3gpp_finish = disconnect_3gpp_finish;broadband_bearer_class->get_ip_config_3gpp = get_ip_config_3gpp;broadband_bearer_class->get_ip_config_3gpp_finish = get_ip_config_3gpp_finish; Regards
