Re: [MORPHMET] problems opening ply files
Apologies! I meant that Morpheus reads the file, but does not open it. The models open properly in Meshlab. Any ideas?? > On Nov 2, 2016, at 1:38 AM, Murat Maga <m...@uw.edu> wrote: > > I am not sure what you mean Meshlab opens, but not displays it. Do you > actually see information about your model in meshlab? If you see information > about your model, it opened it. Perhaps faces are inverted. I have seen > proprietary software (such as 3DMD) not exporting ply/stl properly from their > own format. <> > > If you can’t open it with Meshlab, chances are good that your model is > misconstructed. I don’t think it is anything to do laser vs photogrammetry. > > M > > > > > From: Gabriel Wrobel [mailto:gwrobe...@gmail.com] > Sent: Tuesday, November 01, 2016 12:48 PM > To: MORPHMET <morphmet@morphometrics.org> > Subject: Re: [MORPHMET] problems opening ply files > > I am running Morpheus with .bat, and tried the Meshlab workaround, and still > no luck opening my cranial model. I tried saving it both with and without > texture -- neither worked. I also tried saving it as an obj file, and it also > doesn't open. Meshlap seems to read the files, but just never opens them. I > was wondering if anyone else using Morpheus has tried working with ply files > made with photogrammetry (rather than laser scanning). Many thanks! > > gabe > > On Friday, October 28, 2016 at 1:47:30 PM UTC-4, dslice wrote: > Two possibilities... > > 1) Make sure you are using the latest version and running the program > via a .bat, .sh, or .app. There could be memory problems if you try to > run the .java file directly. The scripts provide for more memory. > > but more likely... > > 2) Some programs create .ply files that are somehow indigestible by > Morpheus. Open the file in Meshlab and (re)save it (binary or ascii > doesn't matter). That might clear up any problems. > > -ds > > On 10/28/16 1:37 PM, Gabriel Wrobel wrote: > > Hi all. I am new to this sort of analysis, so apologize in advance for > > the rudimentary nature of my question. I am attempting to open ply files > > of 3D cranial models built with Agisoft Photoscan on Morpheus and am not > > having any luck at all. Morpheus reads the file, but does not open it. > > It seems to be fine with ply files created from laser scans. Is this > > an issue anyone is familiar with? Thanks! > > > > gabe wrobel > > > > -- > > MORPHMET may be accessed via its webpage at http://www.morphometrics.org > > <http://www.morphometrics.org/> > -- > MORPHMET may be accessed via its webpage at http://www.morphometrics.org > <http://www.morphometrics.org/> > --- > You received this message because you are subscribed to the Google Groups > "MORPHMET" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to morphmet+unsubscr...@morphometrics.org > <mailto:morphmet+unsubscr...@morphometrics.org>. -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org.
RE: [MORPHMET] problems opening ply files
I am not sure what you mean Meshlab opens, but not displays it. Do you actually see information about your model in meshlab? If you see information about your model, it opened it. Perhaps faces are inverted. I have seen proprietary software (such as 3DMD) not exporting ply/stl properly from their own format. If you can’t open it with Meshlab, chances are good that your model is misconstructed. I don’t think it is anything to do laser vs photogrammetry. M From: Gabriel Wrobel [mailto:gwrobe...@gmail.com] Sent: Tuesday, November 01, 2016 12:48 PM To: MORPHMET <morphmet@morphometrics.org> Subject: Re: [MORPHMET] problems opening ply files I am running Morpheus with .bat, and tried the Meshlab workaround, and still no luck opening my cranial model. I tried saving it both with and without texture -- neither worked. I also tried saving it as an obj file, and it also doesn't open. Meshlap seems to read the files, but just never opens them. I was wondering if anyone else using Morpheus has tried working with ply files made with photogrammetry (rather than laser scanning). Many thanks! gabe On Friday, October 28, 2016 at 1:47:30 PM UTC-4, dslice wrote: Two possibilities... 1) Make sure you are using the latest version and running the program via a .bat, .sh, or .app. There could be memory problems if you try to run the .java file directly. The scripts provide for more memory. but more likely... 2) Some programs create .ply files that are somehow indigestible by Morpheus. Open the file in Meshlab and (re)save it (binary or ascii doesn't matter). That might clear up any problems. -ds On 10/28/16 1:37 PM, Gabriel Wrobel wrote: > Hi all. I am new to this sort of analysis, so apologize in advance for > the rudimentary nature of my question. I am attempting to open ply files > of 3D cranial models built with Agisoft Photoscan on Morpheus and am not > having any luck at all. Morpheus reads the file, but does not open it. > It seems to be fine with ply files created from laser scans. Is this > an issue anyone is familiar with? Thanks! > > gabe wrobel > > -- > MORPHMET may be accessed via its webpage at http://www.morphometrics.org -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org<mailto:morphmet+unsubscr...@morphometrics.org>. -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org.
Re: [MORPHMET] problems opening ply files
I am running Morpheus with .bat, and tried the Meshlab workaround, and still no luck opening my cranial model. I tried saving it both with and without texture -- neither worked. I also tried saving it as an obj file, and it also doesn't open. Meshlap seems to read the files, but just never opens them. I was wondering if anyone else using Morpheus has tried working with ply files made with photogrammetry (rather than laser scanning). Many thanks! gabe On Friday, October 28, 2016 at 1:47:30 PM UTC-4, dslice wrote: > > Two possibilities... > > 1) Make sure you are using the latest version and running the program > via a .bat, .sh, or .app. There could be memory problems if you try to > run the .java file directly. The scripts provide for more memory. > > but more likely... > > 2) Some programs create .ply files that are somehow indigestible by > Morpheus. Open the file in Meshlab and (re)save it (binary or ascii > doesn't matter). That might clear up any problems. > > -ds > > On 10/28/16 1:37 PM, Gabriel Wrobel wrote: > > Hi all. I am new to this sort of analysis, so apologize in advance for > > the rudimentary nature of my question. I am attempting to open ply files > > of 3D cranial models built with Agisoft Photoscan on Morpheus and am not > > having any luck at all. Morpheus reads the file, but does not open it. > > It seems to be fine with ply files created from laser scans. Is this > > an issue anyone is familiar with? Thanks! > > > > gabe wrobel > > > > -- > > MORPHMET may be accessed via its webpage at http://www.morphometrics.org > -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org.
Re: [MORPHMET] problems opening ply files
Two possibilities... 1) Make sure you are using the latest version and running the program via a .bat, .sh, or .app. There could be memory problems if you try to run the .java file directly. The scripts provide for more memory. but more likely... 2) Some programs create .ply files that are somehow indigestible by Morpheus. Open the file in Meshlab and (re)save it (binary or ascii doesn't matter). That might clear up any problems. -ds On 10/28/16 1:37 PM, Gabriel Wrobel wrote: Hi all. I am new to this sort of analysis, so apologize in advance for the rudimentary nature of my question. I am attempting to open ply files of 3D cranial models built with Agisoft Photoscan on Morpheus and am not having any luck at all. Morpheus reads the file, but does not open it. It seems to be fine with ply files created from laser scans. Is this an issue anyone is familiar with? Thanks! gabe wrobel -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org.
[MORPHMET] problems opening ply files
Hi all. I am new to this sort of analysis, so apologize in advance for the rudimentary nature of my question. I am attempting to open ply files of 3D cranial models built with Agisoft Photoscan on Morpheus and am not having any luck at all. Morpheus reads the file, but does not open it. It seems to be fine with ply files created from laser scans. Is this an issue anyone is familiar with? Thanks! gabe wrobel -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org.
