Re: [Nagios-users] how to fix excessive latency
There is something definitely not right here. We have about 1 checks and the performance is lot better. Anyhow we are using the following values check_result_reaper_frequency=10 max_check_result_reaper_time=20 You should enabled debug mode and check the debug logs. Are you writing to any backend database? Are you using nsca to transfer service information to remote location. what is the value of your status_update_interval? what is your external_command_buffer_slots? 2010/6/28 wwanghongrui wwanghong...@cebbank.com Hi,guys~ Our nagios server envrionment: Nagios3.2.0 + Suse10-sp2 x86_64 + 8 GB mem + 4 x ( Xeon(R) CPU E7420 @ 2.13GHz ) We have 500+ active check hosts and 3k+ active check services. I have adjust some perfomance parameters in nagios.cfg, like below: use_large_installation_tweaks=1 child_processes_fork_twice=0 enable_environment_macros=0 check_result_reaper_frequency=5 max_check_result_reaper_time=30 But, The nagios performance is still bad, like below: Services Actively Checked: Time Frame Services Checked = 1 minute: 271 (9.4%) = 5 minutes: 1749 (60.4%) = 15 minutes: 2824 (97.4%) = 1 hour: 2898 (100.0%) Since program start: 2869 (99.0%) Metric Min. Max. Average Check Execution Time: 0.09 sec 32.23 sec 1.113 sec Check Latency: 1.12 sec 212.59 sec 116.329 sec Percent State Change: 0.00% 23.88% 0.05% Hosts Acrively Checked: Time Frame Hosts Checked = 1 minute: 32 (5.5%) = 5 minutes: 419 (71.5%) = 15 minutes: 586 (100.0%) = 1 hour: 586 (100.0%) Since program start: 586 (100.0%) Metric Min. Max. Average Check Execution Time: 0.08 sec 4.29 sec 3.035 sec Check Latency: 0.00 sec 135.25 sec 116.420 sec Percent State Change: 0.00% 11.32% 0.09% How could I find which services check or hosts check cause this seriously check latency? Regards HongRui Wang mail: wwanghong...@cebbank.com 2010-06-28 -- This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Not receiving notification mails
There are three things you need to check 1) if Nagios server notification is enabled? 2) if service or host level notification is enabled? 3) if your contact definition has proper notification attribute? On Mon, Jun 21, 2010 at 11:11 AM, R, Naveen navee...@philips.com wrote: Dear All, I have configured Nagios xi in my machine, that is on windows xp, making use of VM Player Virtual Machine. I have configure it to track some websites and it is tracking correctly, but as last I'm not receiving any mails of this notification. I tried to send the test mail, and I'm receiving it correctly, but when the service is down/up or might be any, I'm not receiving any notification mails for that. So, please can you guide me how I go further in this. And also when I click on Apply configuration, it happens correctly and when I come to any apply configuration page it says Warning: configuration file is out of date! in red. Also could you tell me the difference between Nagios Xi and Nagios 3.0.6 version, because people who have installed 3.0.6 version, its working correctly for them, but not for me. :-( So please guide me in resolving this issues. Regards, Naveen The information contained in this message may be confidential and legally protected under applicable law. The message is intended solely for the addressee(s). If you are not the intended recipient, you are hereby notified that any use, forwarding, dissemination, or reproduction of this message is strictly prohibited and may be unlawful. If you are not the intended recipient, please contact the sender by return e-mail and destroy all copies of the original message. -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] NDOUTILS - Duplicate lines for each service check in servicechecks table (ndoutils 1.4b9)
Can someone point out the patch location. I have searched nagios-devel mailing list but could not find it. Thanks in advance. On Tue, Nov 10, 2009 at 6:09 PM, Michael Friedrich michael.friedr...@univie.ac.at wrote: Øyvind Nordang wrote: Duplicate lines for each service check in servicechecks table (ndoutils 1.4b9) I have: Nagios 3.2.0 NDOutils 1.4b9 Is this a bug of feature? I've attached the patch to nagios-devel, dunno when it will be fixed then. But I have analyzed more queries, and there are several other tables missing unique constraints and therefore causing duplicate rows - e.g. systemcommands while testing perfdata output ... Maybe another patch will follow but first I will first on Icinga :-) Kind regards, Michael -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] nrpe configuration help
All, I need some suggestion for nrpe configuration. I have 3 different kind of architecture in my setup. I have 32 bit linux machine (plugins installed at /usr/lib/nagios/plugins directory) , 64 bit linux machine (plugins installed /usr/lib64/nagios/plugins directory), solaris machine (plugins installed at /opt/libexec directory) In my nrpe.conf file I would three definitions like below [check_something]=/usr/lib/nagios/plugins/check_something [check_something_x64]= /usr/lib64/nagios/plugins/check_something [cehck_something_unix]=/opt/libexec/check_somthing in my service definition, I would name them differently and call the command file, for example I would have a check disk, disk_x64, disk_unix. In commands.cfg file I would call them like command_name check_remote command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ However, now new requirements came in, where disk, disk_x64, disk_unix must have same service name. I need to find a clever way define service disk and call different nrpe command based on architecture. Can someone please help me with this. Thanks -- Cordially, Shadhin Rahman -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Can an entity have more than one parent?
All, I am monitoring a set of vif behind csm. I want to control the amount notifications. So basic idea is if the host is down don't bother sending notification for the vif. So, I fiugure I would just create parent child relationship with the host serving the page and vif name. However, one problem is, all vifs are being served by two hosts. So I have two questions. 1) Can a host have two parents? 2) What happen if only one of those parents go down? Please advise on these. Thanks -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] nrpe and critical state
I am doing a check which counts the number of process running on the remote host. Lets say for whatever reason nrpe could not establish connection during the test. In this situation, should it not go to UNKNOWN state. However I see its going to critical state. Please advise on this. Thanks [user]./check_nrpe -H x -c check_process_x64 -a 0: 10: httpd Connection refused by host [user]echo $? 2 -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] nrpe and critical state
nrpe -u option does not work if nrpe is shutdown in the remote host. On Tue, May 25, 2010 at 11:42 AM, Stier, Matthew matthew.st...@us.fujitsu.com wrote: From the check_nrpe usage message: Options: -n = Do no use SSL -u = Make socket timeouts return an UNKNOWN state instead of CRITICAL *From:* shadih rahman [mailto:shadhi...@gmail.com] *Sent:* Tuesday, May 25, 2010 11:35 AM *To:* nagios-users@lists.sourceforge.net *Subject:* [Nagios-users] nrpe and critical state I am doing a check which counts the number of process running on the remote host. Lets say for whatever reason nrpe could not establish connection during the test. In this situation, should it not go to UNKNOWN state. However I see its going to critical state. Please advise on this. Thanks [user]./check_nrpe -H x -c check_process_x64 -a 0: 10: httpd Connection refused by host [user]echo $? 2 -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] nrpe and critical state
I found this link. I am running nagios version 3.2.0, can someone please verify if this path has been integrated with 3.2.0 or not? Please advise on this. Thanks https://secure.opsera.com/jira/browse/OPS-313 On Tue, May 25, 2010 at 11:52 AM, shadih rahman shadhi...@gmail.com wrote: nrpe -u option does not work if nrpe is shutdown in the remote host. On Tue, May 25, 2010 at 11:42 AM, Stier, Matthew matthew.st...@us.fujitsu.com wrote: From the check_nrpe usage message: Options: -n = Do no use SSL -u = Make socket timeouts return an UNKNOWN state instead of CRITICAL *From:* shadih rahman [mailto:shadhi...@gmail.com] *Sent:* Tuesday, May 25, 2010 11:35 AM *To:* nagios-users@lists.sourceforge.net *Subject:* [Nagios-users] nrpe and critical state I am doing a check which counts the number of process running on the remote host. Lets say for whatever reason nrpe could not establish connection during the test. In this situation, should it not go to UNKNOWN state. However I see its going to critical state. Please advise on this. Thanks [user]./check_nrpe -H x -c check_process_x64 -a 0: 10: httpd Connection refused by host [user]echo $? 2 -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] NRPE with command arguments
try nrpe call -n option On Wed, May 19, 2010 at 11:06 AM, Ludse Verhoeven ludse.verhoe...@vopak.com wrote: I think that's fine. It all depends on what you want to pass to the command itself (in this case the /usr/locall.nagios/libexec/check_disk-plugin). If f.i. -w $ARG1$ can use space-seperated values (which it can't, but just for arguments sake), then you have to specify (in nrpe.cfg) the (single- or) double-quotes. Personally I tend not to use quoting in nrpe.cfg since in most cases it is not necessary, but there might be reasons to explicitly enclose such arguments in quotes. Met vriendelijke groet/with kind regards, Ludse Verhoeven AIX System Engineer T: +31 10 400 2440 F: +31 10 400 2891 E: ludse.verhoe...@vopak.com Visit / Postal Address: http://www.vopak.com *Enrico Zimol lomiz.m...@gmail.com* 19/05/2010 16:46 Please respond to Nagios Users List nagios-users@lists.sourceforge.net To Nagios Users List nagios-users@lists.sourceforge.net cc Subject Re: [Nagios-users] NRPE with command arguments On 19 May 2010 11:13, Ludse Verhoeven *ludse.verhoe...@vopak.com*ludse.verhoe...@vopak.com wrote: Not sure if this works like it is supposed to (haven't tested it myself), but qua syntax this seems more correct. That worked fine :) Other question, where exactly I've to insert quotes on nrpe.cfg commands to prevent code injection? I think like this: [nrpe.cfg] [...] command[check_disk]=/usr/local/nagios/libexec/check_disk -w **$ARG1$**-c **$ARG2$** [...] Is it right? Thank's! -- Enrico lomiz Zimol -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/nullhttps://lists.sourceforge.net/lists/listinfo/nagios-users -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] high host latency on nagios master
try lowering max_check_result_reaper value I had good luck playing with that value. Thanks On Tue, May 4, 2010 at 8:13 PM, Trisha Hoang tri...@rockyou.com wrote: Hi, The nagios *master *got really high host latency and I'm not sure how to tweak it. I ran the check_ping plugin on a handful of hosts and the rta averaged at 0.2 second so it's not the network. *Environment:* - 565 hosts - 6790 passive checks from the slaves - not using event broker - master server *actively* executes the hosts checks every 5 minutes and *passively *processes checks every 1 minute - not doing performance data *Nagiostats* Nagios Stats 3.2.1 Copyright (c) 2003-2008 Ethan Galstad (www.nagios.org) Last Modified: 03-09-2010 License: GPL CURRENT STATUS DATA -- Status File:/var/log/nagios/status.dat Status File Age:0d 0h 0m 23s Status File Version:3.2.1 Program Running Time: 0d 1h 32m 19s Nagios PID: 28282 Used/High/Total Command Buffers:1316 / 3066 / 4096 Total Services: 7745 Services Checked: 7745 Services Scheduled: 1381 Services Actively Checked: 955 Services Passively Checked: 6790 Total Service State Change: 0.000 / 9.740 / 0.007 % Active Service Latency: 18.948 / 205.144 / 165.751 sec Active Service Execution Time: 0.007 / 9.051 / 0.055 sec Active Service State Change:0.000 / 5.460 / 0.006 % Active Services Last 1/5/15/60 min: 0 / 0 / 0 / 0 Passive Service Latency:34.359 / 190.247 / 76.739 sec Passive Service State Change: 0.000 / 9.740 / 0.008 % Passive Services Last 1/5/15/60 min:0 / 3054 / 6774 / 6784 Services Ok/Warn/Unk/Crit: 7720 / 1 / 0 / 24 Services Flapping: 27 Services In Downtime: 0 Total Hosts:566 Hosts Checked: 566 Hosts Scheduled:566 Hosts Actively Checked: 566 Host Passively Checked: 0 Total Host State Change:0.000 / 0.000 / 0.000 % Active Host Latency:0.000 / 3410.087 / 2413.051 sec Active Host Execution Time: 0.007 / 10.010 / 0.063 sec Active Host State Change: 0.000 / 0.000 / 0.000 % Active Hosts Last 1/5/15/60 min:0 / 8 / 10 / 565 Passive Host Latency: 0.000 / 0.000 / 0.000 sec Passive Host State Change: 0.000 / 0.000 / 0.000 % Passive Hosts Last 1/5/15/60 min: 0 / 0 / 0 / 0 Hosts Up/Down/Unreach: 563 / 3 / 0 Hosts Flapping: 1 Hosts In Downtime: 0 Active Host Checks Last 1/5/15 min: 5 / 32 / 75 Scheduled: 0 / 0 / 0 On-demand: 5 / 32 / 75 Parallel:1 / 11 / 23 Serial: 0 / 0 / 0 Cached: 4 / 21 / 52 Passive Host Checks Last 1/5/15 min:0 / 0 / 0 Active Service Checks Last 1/5/15 min: 0 / 0 / 0 Scheduled: 0 / 0 / 0 On-demand: 0 / 0 / 0 Cached: 0 / 0 / 0 Passive Service Checks Last 1/5/15 min: 2 / 1455 / 1455 External Commands Last 1/5/15 min: 1302 / 6063 / 20253 *Nagios.cfg* # EXTERNAL COMMAND CHECK INTERVAL # This is the interval at which Nagios should check for external commands. # This value works of the interval_length you specify later. If you leave # that at its default value of 60 (seconds), a value of 1 here will cause # Nagios to check for external commands every minute. If you specify a # number followed by an s (i.e. 15s), this will be interpreted to mean # actual seconds rather than a multiple of the interval_length variable. # Note: In addition to reading the external command file at regularly # scheduled intervals, Nagios will also check for external commands after # event handlers are executed. # NOTE: Setting this value to -1 causes Nagios to check the external # command file as often as possible. #command_check_interval=15s command_check_interval=-1 # SERVICE INTER-CHECK DELAY METHOD # This is the method that Nagios should use when initially # spreading out service checks when it starts monitoring. The # default is to use smart delay calculation, which will try to # space all service checks out evenly to minimize CPU load. # Using the dumb setting will cause all checks to be scheduled # at the same time (with no delay between them)! This is not a # good thing for production, but is useful when testing the # parallelization functionality. # n =
Re: [Nagios-users] Designing distributed and failover architecture
I have not implemented distributed nagios but I have failover setup. Few comments I want to make 1) If you are using ndoutils for backend make sure you have looked at faster speed up option. There is a patch for faster start up in opsview 2) if you using nsca to transfer acknowledgement and comments make sure you do some research on that. scalability is a problem 3) remember to understand failover architecture properly. I have made few mistakes when it comes to ndoutils. your ndomod data processing option should be different on the failover from master server. Your master should push configuration definitions into database but your failover should not push theses configuration defitions in database. 4) Keep in mind scalability will be a problem. data retention is really a difficult problem for large setup. On Sat, Apr 10, 2010 at 10:44 AM, Shanti Katta shantika...@gmail.comwrote: Need suggestions on designing a distributed and failover Nagios monitoring infrastructure for ~1500 Linux RHEL hosts spread across 2 datacenters and DMZ networks. Reading through different archives, it appears DNX is the most preferred method for distribution/cluster setup and having a secondary Nagios server as a fail over option managed via Linux HA/DRBD. What are some of the cons in following setup: - Primary and secondary(failover) Nagios servers managed by Linux HA/DRBD/cron etc. Have MySQL replication between them. - Primary Nagios server performing active checks via N DNX worker nodes in both datacenters. - Primary Nagios server monitoring DMZ hosts via NRPE (Custom regular expression for services). Thanks -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] disk check question
All, disk check returns amount of free space. Is there anyway to output disk used? off course I am talking about the stocked C check_disk plugins. Please advise on this. -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] greedy regular experssion nrpe
I have a plugin script which does non-greedy regular expression search . Which works fine when invoked locally on the machine. However when I call it via nrpe, it does greedy regular expression search. Can someone shed some light into this? Thanks in advance -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] greedy regular experssion nrpe
Asif,
Thanks for your response. I am attaching the actual plugin in this
email. However the actual regular expression line is below.
if ($_=~ qr/$xgrep/mo){
$returnstring= We have found $xgrep in $opfile;
nrpe definition is something like this
command[check_filecontent_x64]=/usr/lib64/nagios/plugins/check_filetest -n
$ARG1$ -G $ARG2$ -c $ARG3$
service definition is something like this
check_nrpe -H whatever -c check_filecontent_x64 -a filename .*foo* 1
On Wed, Mar 31, 2010 at 12:01 PM, Assaf Flatto nag...@flatto.net wrote:
shadih rahman wrote:
I have a plugin script which does non-greedy regular expression search
. Which works fine when invoked locally on the machine. However when
I call it via nrpe, it does greedy regular expression search. Can
someone shed some light into this? Thanks in advance
--
Cordially,
Shadhin Rahman
We could help more if we saw the regex and the nrpe definitions (
command and cfg file)
--
Never,Ever Cut A Deal With a Dragon
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null
--
Cordially,
Shadhin Rahman
check_filetest
Description: Binary data
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] greedy regular experssion nrpe
Assaf,
Thank you for your help. Just wanted to add. Escaping with '\' did not
work but it work when I use '$'. Thanks
On Wed, Mar 31, 2010 at 12:32 PM, Assaf Flatto nag...@flatto.net wrote:
shadih rahman wrote:
Asif,
Thanks for your response. I am attaching the actual plugin in this
email. However the actual regular expression line is below.
if ($_=~ qr/$xgrep/mo){
$returnstring= We have found $xgrep in $opfile;
nrpe definition is something like this
command[check_filecontent_x64]=/usr/lib64/nagios/plugins/check_filetest
-n $ARG1$ -G $ARG2$ -c $ARG3$
service definition is something like this
check_nrpe -H whatever -c check_filecontent_x64 -a filename .*foo* 1
if you want to pass the quotation marks to the test you will need to
escape them .
like this [ -a filename \\.\*foo\*\ 1 ] so nrpe will pass them as part
of the string to the daemon on the target machine.
Assaf
--
Never,Ever Cut A Deal With a Dragon
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null
--
Cordially,
Shadhin Rahman
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] on call rotation change on the fly
Lets say I have an on-call rotation pre-defined with a list of names. Now, one of the operations member can not make it. Is it possible to change on-call rotation on the fly. Please advise on this. Thanks -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] on call rotation with check
Is it possible to maintain a on call rotation via a service check? Also possibly pass in a nagios username to update the on call rotation? Please advise on this. Thanks -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] multiple check_interval with single service check
All, Is it possible to use multiple check_interval based on the hours of the day for a single check? For example during day time service should be executed every 15 minutes and during night it will get executed every 2 hours. Can someone please show me how its done. Thanks -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] ndo unusual behavior
In my nagios setup all object_id from nagios_object table jumped down to 31 to 3 on January 5, 2010 around 11: 06 PM, can someone shed any light to this issue? Thanks -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] NRPE question
I am running nrpe as daemon rather than xinetd. I have one server which showed high load and all nrpe checks where showing UNKNOWN. Later on I logged into the box and I saw there were 382 nrpe process running. Can someone shed some light into this? Thanks -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] NRPE question
I have thought about this solution but I have an issue with this. Let us say the machine has high load. Now, I presume, we are checking the number of nrpe processes on client host via nrpe. If the load is high, the check for number of nrpe processes will fail, which in turn would fork possibly another nrpe process? Please advise on this. Thanks On Mon, Feb 22, 2010 at 2:34 PM, patrick.mor...@hp.com wrote: On Mon, 22 Feb 2010, shadih rahman wrote: I am running nrpe as daemon rather than xinetd. I have one server which showed high load and all nrpe checks where showing UNKNOWN. Later on I logged into the box and I saw there were 382 nrpe process running. Can someone shed some light into this? Thanks Happens here all the time. I have a Nagios check that looks for high numbers of NRPE processes and restarts it if it goes out of control. I'm not sure what causes it; the brute force method we're using here has been enough to keep it under control. -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] NRPE question
I have thought about this solution but I have an issue with this. Let us say the machine has high load. Now, I presume, we are checking the number of nrpe processes on client host via nrpe. If the load is high, the check for number of nrpe processes will fail, which in turn would fork possibly another nrpe process? Please advise on this. Thanks On Mon, Feb 22, 2010 at 3:01 PM, shadih rahman shadhi...@gmail.com wrote: I have thought about this solution but I have an issue with this. Let us say the machine has high load. Now, I presume, we are checking the number of nrpe processes on client host via nrpe. If the load is high, the check for number of nrpe processes will fail, which in turn would fork possibly another nrpe process? Please advise on this. Thanks On Mon, Feb 22, 2010 at 2:34 PM, patrick.mor...@hp.com wrote: On Mon, 22 Feb 2010, shadih rahman wrote: I am running nrpe as daemon rather than xinetd. I have one server which showed high load and all nrpe checks where showing UNKNOWN. Later on I logged into the box and I saw there were 382 nrpe process running. Can someone shed some light into this? Thanks Happens here all the time. I have a Nagios check that looks for high numbers of NRPE processes and restarts it if it goes out of control. I'm not sure what causes it; the brute force method we're using here has been enough to keep it under control. -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Alternate schedule for service
I have to check a service every 30 minutes during normal business hour and
check the service every two hours after mid-night. I have a extended time
period definition. Can someone please give an example how to do this?
Thanks
define timeperiod{
timeperiod_name extended
alias extended
sunday 07:00-22:59,23:00-06:59
monday 07:00-22:59,23:00-06:59
tuesday 07:00-22:59,23:00-06:59
wednesday 07:00-22:59,23:00-06:59
thursday07:00-22:59,23:00-06:59
friday 07:00-22:59,23:00-06:59
saturday07:00-22:59,23:00-06:59
}
define service{
nameextended; Name of this
template
use generic-service ; Inherit default values
check_periodextended
normal_check_interval 30
retry_check_interval5
max_check_attempts 2
notification_period extended
notification_interval 30
notification_optionsc,r,f
register0; DONT REGISTER THIS - ITS A
TEMPLATE
}
--
Cordially,
Shadhin Rahman
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] NRPE question
Unfortunately my problem is that its happenning on a remote client machine rather than nagios server. On Mon, Feb 22, 2010 at 3:32 PM, patrick.mor...@hp.com wrote: Hi shadih! On Mon, 22 Feb 2010, shadih rahman wrote: I have thought about this solution but I have an issue with this. Let us say the machine has high load. Now, I presume, we are checking the number of nrpe processes on client host via nrpe. If the load is high, the check for number of nrpe processes will fail, which in turn would fork possibly another nrpe process? Please advise on this. Thanks On Mon, Feb 22, 2010 at 2:34 PM, patrick.mor...@hp.commailto: patrick.mor...@hp.com wrote: On Mon, 22 Feb 2010, shadih rahman wrote: I am running nrpe as daemon rather than xinetd. I have one server which showed high load and all nrpe checks where showing UNKNOWN. Later on I logged into the box and I saw there were 382 nrpe process running. Can someone shed some light into this? Thanks Happens here all the time. I have a Nagios check that looks for high numbers of NRPE processes and restarts it if it goes out of control. I'm not sure what causes it; the brute force method we're using here has been enough to keep it under control. The check I was referring to runs on the Nagios boxes (since that's where I see nrpe go out of control). So I'm doing a local check that does nothing but look for NRPE in the process list; it doesn't use NRPE to do that. -- Cordially, Shadhin Rahman -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Ndo2DB and Check for network traffic
Marc, I have similar question about cricket. We use cricket to poll network related data. However I have not found a way to poll once in nagios and use the data for cricket. Currently (for many devices), I do snmp poll twice, one for nagios, one for cricket. Do you have any suggestion as to poll once and have the data available for both system. Thanks On Fri, Feb 12, 2010 at 7:51 AM, Marc Powell m...@ena.com wrote: On Feb 12, 2010, at 3:18 AM, Renaud Vanderhagen wrote: Hello world ! What backup ndo2db exactly in ndo database ? Where can I find a map of the ndo database ? See the NDOUtils_DB_Model.pdf included with the program or online at http://nagios.sourceforge.net/docs/ndoutils/NDOUtils_DB_Model.pdf. Is it possible to backup the nagios.log ? Much or all of it is stored in the Historical Tables. What do you use to monitor network traffic on servers and switchs interfaces ? Cricket. -- Marc -- SOLARIS 10 is the OS for Data Centers - provides features such as DTrace, Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW http://p.sf.net/sfu/solaris-dev2dev ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- SOLARIS 10 is the OS for Data Centers - provides features such as DTrace, Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW http://p.sf.net/sfu/solaris-dev2dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios web GUI, contact groups, hosts and services
Karssen, Your problem appears to be process not the tool. I am not suggesting how to conduct business in your organization but here is my suggestion. I would reach out to noc management and put together a wiki or how to for each unique possible critical alert scenario. The I would add the notes_url parameter of Nagios to point to that particular wiki page. Only thing noc has to do click on the notes_url page and they will know exactly what to do with the alert. Thanks On Mon, Feb 8, 2010 at 3:40 AM, L.C. Karssen lennart.kars...@snow.nlwrote: Dear list, I'm presently working on a Nagios 3.2.0 setup that monitors approximately 1000 hosts and about 5000 services. The setup doesn't make use of Nagios' notification system, instead people at a control center (NOC) use the Nagios web interface to alert the appropriate people in case of an alert. The Nagios configuration is based on a set of host (group) templates, where services are assigned to host groups. For example: the 'check_swap' service definition is associated with the host group 'all unix hosts'. The problem I'm confronted with is that the people at the NOC don't need to see all services on a given host. For example, they shouldn't call the sysadmin at night if an SSL certificate check goes into critical state because the certificate is only valid for ten more days. So we want to remove that service from their view. In the present situation contact groups (used to determine which servers are visible to which department) are added to each specific host, but according to the Nagios docs (http://nagios.sourceforge.net/docs/3_0/cgiauth.html) a contact group can see _all_ services on a given host if it is listed as a contract group for the host. So I decided to remove the NOC contact group from the individual host definitions and to assign the NOC contact group only to specific services. This leads me to another problem. Some service checks (i.e. host groups) are used in one department only. This works fine. However, some other service checks (like check_swap for the 'all unix hosts' hostgroup) are shared by all departments, but some departments don't want the NOC to see check_swap alerts whereas others do want to pass these alerts to NOC. It would be possible to make services with slightly different names (e.g. check_swap_dept1, check_swap_dept2), each with the correct contact group. However, that seems to be a needless increase of complexity. Another approach would be to make host groups for each department and somehow change the service contact group for each host group. Unfortunately I haven't been able to get that to work. Any suggestions would be highly appreciated. Lennart Karssen. -- The Planet: dedicated and managed hosting, cloud storage, colocation Stay online with enterprise data centers and the best network in the business Choose flexible plans and management services without long-term contracts Personal 24x7 support from experience hosting pros just a phone call away. http://p.sf.net/sfu/theplanet-com ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- The Planet: dedicated and managed hosting, cloud storage, colocation Stay online with enterprise data centers and the best network in the business Choose flexible plans and management services without long-term contracts Personal 24x7 support from experience hosting pros just a phone call away. http://p.sf.net/sfu/theplanet-com___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] benchmark question
List, Is there any information as to what is the maximum number of services one can run on a single box with single instance of Nagios? I did not find any concrete data on this. I am running a single instance of nagios on a quad core 2.5 GHZ machine with with 4 Gigs of RAM. I have total of 7359 service check running on this box. I have also ndoutils running on the same box as backend. My total service checks is going to five fold very soon with a lot of nrpe checks. Now, my question is should I run multiple instance of nagios on the same box or a single instance will be able to handle about 3 service checks? I already tested a dev environment with multiple instance of nagios with some hacking to init.d script, it started and monitored fine. What would be the preferred method of running nagios, single instance on a box or multiple instance on a box when we are dealing with high number of service checks? Please comment on this. Thanks -- Cordially, Shadhin Rahman -- Return on Information: Google Enterprise Search pays you back Get the facts. http://p.sf.net/sfu/google-dev2dev ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] check_snmp with regular expression
List, I am trying to use check_snmp plugin with the following regular expression and I am getting an error, can someone point out what am I doing wrong. Thanks /usr/lib64/nagios/plugins/check_snmp -H hostname -C community -o .1.3.6.1.2.1.1.6.0 -r ^*.some string*$ Could Not Compile Regular Expressioncheck_snmp: Could not parse arguments -- Cordially, Shadhin Rahman -- Return on Information: Google Enterprise Search pays you back Get the facts. http://p.sf.net/sfu/google-dev2dev ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Hardware requirements
I have a quad core 2GHZ and 4 GB memory machine and I am getting the following performance. Service Check Execution Time:https://nagios.cc.columbia.edu/nagios/cgi-bin/extinfo.cgi?type=40.00 / 60.01 / 0.381 sechttps://nagios.cc.columbia.edu/nagios/cgi-bin/extinfo.cgi?type=4 Service Check Latency:https://nagios.cc.columbia.edu/nagios/cgi-bin/extinfo.cgi?type=40.00 / 15.93 / 0.156 sechttps://nagios.cc.columbia.edu/nagios/cgi-bin/extinfo.cgi?type=4 Host Check Execution Time:https://nagios.cc.columbia.edu/nagios/cgi-bin/extinfo.cgi?type=40.01 / 30.01 / 0.583 sechttps://nagios.cc.columbia.edu/nagios/cgi-bin/extinfo.cgi?type=4 Host Check Latency:https://nagios.cc.columbia.edu/nagios/cgi-bin/extinfo.cgi?type=40.00 / 712.08 / 1.051 sechttps://nagios.cc.columbia.edu/nagios/cgi-bin/extinfo.cgi?type=4 I have ndoUtils running in the background with long retention time. I have no performance issue. I had seen some issue in the past but that had to do with configuration issue. Please read the performance tuning section of the Nagios doc. Thanks On Tue, Dec 1, 2009 at 10:14 AM, Tommy Mogensen tommy.mogen...@uni-c.dkwrote: Hi Nagios-experts I am looking for a free system able to monitor 3000-5000 hosts (Mainly cisco routers, switches and ap's) via ping and snmp. I would prefer to run everything on one server if possible. I have received a good deal on a machine with 16G ram, 2xSSD-disks (maybe in raid-0), and 2xIntel E5520-CPUs. I would appreciate your input regarding the performance issues should I use Nagios for this system. Is this configuration powerful enough, what are the limiting parts of the setup and are some of the pieces unnecessary? I.e. I could go for one cpu (4 cores) if nagios does not support threading to 8 coresor is the main bottleneck that I do not run it distributed? Regards, Tommy -- Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere. http://p.sf.net/sfu/redhat-sfdev2dev ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere. http://p.sf.net/sfu/redhat-sfdev2dev___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] What would you want in a replacement web interface?
This is not an issue. nagios search bar does regular expression search. do ffs-* in your box and it will result in all the hosts. Nagios is a monitoring tool. I think nagios users and administrators are some what involved with technology. Knowing how to do regular expression search is not an extreme requirement. On Tue, Nov 24, 2009 at 1:47 PM, Israel Brewster isr...@frontierflying.comwrote: 2009/11/16 Taylor Dondich tdond...@lilacnetworks.com: #3) What is your biggest gripe regarding the existing Nagios web user interface? The lack of a real search. The select box is practically useless. For example, I have a bunch of hosts named ffs-whatever, but if I type in ffs- to the search box, I only get one result. I would really like a real (albeit simple) search so if I type ffs, I get ALL hosts containing ffs. --- Israel Brewster Computer Support Technician II Frontier Flying Service Inc. 5245 Airport Industrial Rd Fairbanks, AK 99709 (907) 450-7250 x293 --- -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] plugin information
I pose this question in the past but I apologize for the same question again. However I saw some discussion on the list about check_mk. I am using nrpe now to monitor remote host. Do you think move to check_mk is the right action to take? Architecturally it sounds appealing, although I did not delve into the code yet. Can someone please advise on this. Thanks On Mon, Jul 20, 2009 at 11:45 AM, Marc Powell m...@ena.com wrote: On Jul 20, 2009, at 10:28 AM, shadih rahman wrote: Is nagios official page going to support this in the future? Thanks in avance http://mathias-kettner.de/check_mk Probably not, for a number of reasons, not least of which is that it isn't developed by Ethan, et al. First I've heard of it personally so it's use is likely to be limited. -- Marc -- Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios disfunctional , perhaps due to time change ?
All Is there an official patch for this? can someone please advise on this? Thanks On Mon, Oct 26, 2009 at 1:36 PM, Ton Voon ton.v...@opsera.com wrote: On 26 Oct 2009, at 12:53, Matthias Flacke wrote: this change is causing the wrong reschedule: http://nagios.cvs.sourceforge.net/viewvc/nagios/nagios/base/utils.c?r1=1.236r2=1.237view=patch It has been applied on 15th of January 2009 and introduced some statements t-tm_isdst=-1; into base/utils.c. Affected are all Nagios versions = 3.1.0. I could reproduce it here: if the patch above is backed out, the scheduling behaves correctly. I've managed to get a libtap test case with the failure now. As you correctly say, removing the t-tm_isdst=-1 in utils.c fixes it. However, the fact it works is lucky. The check is that the scheduled time is between a date_range_start and a date_range_end. This date_range_end is based on the timeperiod definitions. However, an end point of 00:00 is calculated as 24*60*60. Obviously, this is wrong on the day that the clocks go back as there are 25 hours in that day. So removing tm_isdst gets the calculation for the epoch time wrong, but that luckily works because the time falls within the 24 hour period. I've applied the patch to remove that single tm_isdst. Tests are also added now, for this specific issue. Long term, I think it is correct that the isdst flag be set, but there are other problems that are lurking in the code, such as the calculation for the next appropriate time. Any comments? Ton -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios disfunctional , perhaps due to time change ?
If our configuration is not using daytime offset, are we still affected by this bug. Nagios version 3.2.0 Please advise on this. Thanks On Mon, Oct 26, 2009 at 12:57 PM, xesos xe...@free.fr wrote: Hello, Same bug. Last sunday, in France, Daylight saving time ends so clocks retreat from 03:00 CEST to 02:00 CET. Today, I see that many checks of my nagios server have problems : next check is scheduled today at 11:00pm but, in the config files, the check interval is set to 5 minutes. More over, last week, it works as expected with checks every 5 minutes. Mark Elsen a écrit : - Nagios 3.2.0 --- - This morning, I find nagios stopped death in it's tracks. Single daemon running, servcie and host checks are no longer executed. Stopping and restarting NAGIOS does not help. How can I remedy this ? We left DST in Europe. Can this be due to a time change ? All hints welcomed ! Marc. -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] how to start nagios multiple instance
Marc, Thanks for your reply. The reason behind doing multiple instance is described below. Thanks 1) Previous monitoring system (survivor) was running multiple instance based on different systems group. 2) I have been doing hostgroup and servicegroup along with contactgroup to represent different instances of previous monitoring system. However its growing exponentially and seeing performance issue. ( currently there are 8000 servicechecks. Some of the hosts will be 20 fold on the number of service checks run on them soon.) 3. Ndoutils database has performance on quering some of these services. When run different instances with separate database their data set will be smaller and it will be easy to retain the data for longer time. On Fri, Oct 23, 2009 at 9:38 AM, Marc Powell m...@ena.com wrote: On Oct 22, 2009, at 2:03 PM, shadih rahman wrote: All, I am sub dividing my nagios into multiple instances. I have read http://support.nagios.com/knowledgebase/faqs/index.php?option=com_contentview=articleid=52catid=35faq_id=22expand=falseshowdesc=true for information. However I have few questions. Thanks in advance 1) How would we manage init.d script? are we going to use one init.d script to start all the process or should there be multiple init.d script? When I wanted to do this, I used one init.d script, heavily modified. 2) Do we need multiple nagios.cfg file for each instance or one nagios.cfg file separate parameter suche log_file with multiple argument. You'll need multiple nagios.cfg files so that the files that nagios writes to don't conflict. Nagios doesn't understand multiple arguments to things like 'log_file'. 3) Is there a possibility for namespace clash in cgi urls? I'm not sure but you may have issues if you enable the use of nagios environment variables? 4) Why do you think you need to run multiple instances of nagios? What are you trying to accomplish? -- Marc -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] how to start nagios multiple instance
All, I am sub dividing my nagios into multiple instances. I have read http://support.nagios.com/knowledgebase/faqs/index.php?option=com_contentview=articleid=52catid=35faq_id=22expand=falseshowdesc=truefor information. However I have few questions. Thanks in advance 1) How would we manage init.d script? are we going to use one init.d script to start all the process or should there be multiple init.d script? 2) Do we need multiple nagios.cfg file for each instance or one nagios.cfg file separate parameter suche log_file with multiple argument. 3) Is there a possibility for namespace clash in cgi urls? -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] monitor windows service with $
What happens if you do the following? /usr/local/nagios/libexec/check_nt -H 10.2.30.190 -p 12489 -v SERVICESTATE -l service\$DB On Wed, Oct 7, 2009 at 10:03 AM, DE/HAM Hoppe, Leif leif.ho...@hartrodt.com wrote: Hi List, I currently configure the monitoring of some windows services. Just one service is having some problems. I looked in the registry for the real name of the service. It's like service$DB When I now try to check this service, I get the following: nag...@nagios:~ /usr/local/nagios/libexec/check_nt -H 10.2.30.190 -p 12489 -v SERVICESTATE -l service$DB service: Not found It looks like it cuts off everything behind the $. Anybody have an idea? Nagios 3.0.6 Plugins 1.4.14 Client: NSClient++ 0.3.6 Best regards from Hamburg Leif Leif Hoppe IT department System Administrator _ a. hartrodt (GmbH Co) KG Högerdamm 35 20097 Hamburg Tel.: (+49 40) 23 90 - 170 Fax: (+49 40) 23 90 - 394 Mobile: (+49 172) 166 032 6 E-Mail: leif.ho...@hartrodt.com Internet: www.hartrodt.com _ -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Using Nagios to monitor Exchange 2007 Queues, etc.. ??
Here is a great doc for monitoring windows services. Hope this helps http://nagioswiki.com/wiki/index.php/Nagios_Checks_for_Exchange_Server_200x On Mon, Oct 5, 2009 at 10:46 PM, Kevin Keane subscript...@kkeane.comwrote: I've heard occasional reports of that happening. A couple things to check: - Make sure you applied all the latest updates and patches to Windows (not just the critical or important ones that are installed automatically, but also the optional ones). The plugin depends on some recent versions of Windows libraries. Note: you do NOT need IE 8, Silverlight or the like if you want to keep those off your servers. - Try and download the Visual C++ redistributables. For the 32-bit version, go to http://www.microsoft.com/DOWNLOADS/details.aspx?FamilyID=9b2da534-3e03-4391-8a4d-074b9f2bc1bfdisplaylang=en . The link to the 64 bit version is at the bottom of that page. - Re-download the plugin. It could have been corrupted. - Check that there are no permission issues. I hope that helps! Regards, Kevin Mirza Dedic wrote: Hi Kevin, I have downloaded your TNT plugins 1.2.4-x64 for my x64 Win2003 R2, however when I try to run something like check_exchange from the command prompt to see any output I get... C:\NSClient\tnt_plugins_1.2.4-x64check_exchange.exe The system cannot execute the specified program. Any idea why this is happening? Thanks. -Original Message- From: Kevin Keane [mailto:subscript...@kkeane.com] Sent: October/03/2009 5:12 PM Cc: 'nagios-users@lists.sourceforge.net' Subject: Re: [Nagios-users] Using Nagios to monitor Exchange 2007 Queues, etc.. ?? Check out my TNTMonitoringPlugin project on Sourceforge. There is a plugin specifically to monitor Exchange. It handles both Exchange 2003 and Exchange 2007. It does monitor queue lengths as well as a few other factors, but the focus is not really so much on load. Queue length primarily is an indicator of network problems. A long send queue, in particular, tells me that the Internet connection is down, or something along those lines. If you look at the source code for the plugin, you can also see the WMI query used. Mirza Dedic wrote: I cannot seem to find any solid information with Google.com on how to monitor my Exchange 2007 server, I am interested in knowing the send/receive queues, mainly to know the load at any certain time... On the box, I have NSClient++ installed (0.3.7) and I am already monitoring windows services, disk/memory/cpu; but I would like to have nagios look under the roof of the exchange server, and get me some #s for queue lengths. I guess this would be accomplished by WMI? I have not used WMI with NSClient++ before, does anyone have this setup in their environment for Exchange (or even IIS/ISA)? Please give some examples. Thank you.. -- Kevin Keane Owner The NetTech Find the Uncommon: Expert Solutions for a Network You Never Have to Think About Office: 866-642-7116 http://www.4nettech.com This e-mail and attachments, if any, may contain confidential and/or proprietary information. Please be advised that the unauthorized use or disclosure of the information is strictly prohibited. The information herein is intended only for use by the intended recipient(s) named above. If you have received this transmission in error, please notify the sender immediately and permanently delete the e-mail and any copies, printouts or attachments thereof. -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Kevin Keane Owner The NetTech Find the Uncommon: Expert Solutions for a Network You Never Have to Think About Office: 866-642-7116 http://www.4nettech.com This e-mail and attachments, if any, may contain confidential and/or proprietary information. Please be advised that the unauthorized use or disclosure of the information is strictly prohibited. The information herein is intended only for use by the intended recipient(s) named above. If you have received this transmission in error, please notify the sender immediately and permanently delete the e-mail and any copies, printouts or attachments thereof.
Re: [Nagios-users] error check_snmp for UPS
Who is the manufacturer for you Upses. There are bunch of good Ups check you can find in nagiosexchange website. Most of them are written for APC and Liebert. The snmp for upses are well defined. You can write quick perl or shell script to monitor these. http://www.oidview.com/mibs/0/UPS-MIB.html On Fri, Oct 2, 2009 at 7:50 AM, nadia kheffache nadiakheffa...@yahoo.frwrote: Hi, Any one can help me to resolve my probleme please? i have the same error when i execute chack_snmp to monitor UPS-onduleur and sensorIP (humidity and temperature server room). ./check_snmp -H UPS-onduleur1 -C public - o .1.3.6.1.4.1.4555.1.1.1.1.6.2.1.1.17 -w 185:210 -c 286:999 -l '\Input Voltage\' -u '\Volts\' \Input Voltage\ probleme - No data receved from host (Pas de données reçues de l'hôte Commande: /usr/bin/snmpget -t 1 -r 5 -m '' -v 1 [authpriv] UPS-onduleur1:161 Thank you Can you help me please? i have the same error when i execute this commande: command_line $USER1$/check_snmp -H $HOSTADDRESS$ -o .1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0 -w $ARG2$:$ARG1$ -c $ARG4$:$ARG3$ -C $ARG5$ -l Temperature -u °C ./check_snmp -H sensorIP -v 1 -o .1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0 -w 25:29 -c 30:99 -C public -l Temperature -u °C Temperature problème - Pas de donnèes reçues de l'hôte Commande: /usr/bin/snmpget -t 1 -r 5 -m '' -v 1 [authpriv] 1:161 .1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0 to monitore the temperature in the local server with sensorIP, snmpwalk is ok, i have the same error with the UPS-onduleur thank you --- En date de : Jeu 1.10.09, frank.bourd...@dga.defense.gouv.fr frank.bourd...@dga.defense.gouv.fr a écrit : De: frank.bourd...@dga.defense.gouv.fr frank.bourd...@dga.defense.gouv.fr Objet: RE [spam?] [Nagios-users] error check_snmp for UPS À: nadia kheffache nadiakheffa...@yahoo.fr Cc: nagios-users@lists.sourceforge.net Date: Jeudi 1 Octobre 2009, 10h37 Hi, Have you test with snmpwalk to see if you UPS onduleur respond ? Is the UPS mib installed on the nagios server ? Frank email: frank.bourd...@dga.defense.gouv.fr fonction: administrateur systèmes et réseaux tel: 0241936560 fax: 0241936681 ETAS - BP 60036 - route de Laval - 49245 AVRILLE CEDEX [ENVOYE PAR INTERNET] nadia kheffache nadiakheffa...@yahoo.fr 01/10/2009 10:16 A nagios-users@lists.sourceforge.net cc Objet [spam?] [Nagios-users] error check_snmp for UPS Hi, I wont to monitor an ups (onduleur),i use a basic nagios plugin_snmp. but i have these error, i can't get any information about this ups. can you help me please? thank you [nag...@nagios01 libexec]$ ./check_snmp -H UPS-onduleur1 -C public - o .1.3.6.1.4.1.4555.1.1.1.1.6.2.1.1.17 .w 185:210 -c 286:999 -l '\Input Voltage\' -u '\Volts\' \Input Voltage\ problème - Pas de données reçues de l'hôte Commande: /usr/bin/snmpget -t 1 -r 5 -m '' -v 1 [authpriv] UPS-onduleur1:161 Nadia -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay
Re: [Nagios-users] escalation for receiving only recovery events?
The best solution would be service escalation or host escalation feature of nagios. http://books.google.com/books?id=Iujcg9s3BKMCpg=PA262lpg=PA262dq=service+escalation+nagiossource=blots=Ppge7Pp9sasig=slpkoN27AccERQP5l0b1tvJy4p4hl=enei=UPfLSryoG8atlAeC-pniBQsa=Xoi=book_resultct=resultresnum=6#v=onepageq=service%20escalation%20nagiosf=false On Sun, Oct 4, 2009 at 10:35 PM, Stuart Browne stuart.bro...@ausregistry.com.au wrote: -Original Message- From: Justin Pryzby [mailto:just...@norchemlab.com] Sent: Monday, 5 October 2009 02:50 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] escalation for receiving only recovery events? A coworker wants to receive periodic notifies for failing services, and I want to receive only the first one. I can implement that using an inverted escalation (removing me from the notify list at the 2nd notification). However I *do* want to receive recovery events, even if they're after the 2nd notification. Is that configuration possible? Two different contact groups, yourself, and 'everyone else'.. In the base check, put both groups, saying you want the options w,c,r. In the escalation, put just everyone else, with options w,c and first_notification of 2+. Or something like that ;) Stuart -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Auto housekeeping for nagios-3.2.0
All, are there any auto housekeeping done on nagios? After I have updated my nagios installation to 3.2.0. I am seeing nightly performance issue around midnight to 2:30 am. Please advise on this. Nagios-3.2.0 ndoutils-1.4b8 Check Execution Time: 0.00 sec60.01 sec0.247 sec Check Latency:0.00 sec25.73 sec1.518 sec Percent State Change:0.00%24.21%0.06% Check Execution Time: 0.01 sec30.01 sec0.595 sec Check Latency:0.00 sec712.08 sec6.423 sec Percent State Change:0.00%50.00%0.13% -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] nagios time event error
All, I am seeing the following error. I saw some issues mentioned about this on version 2. Can anyone advise on this. Thanks [Sun Oct 4 02:00:57 2009];Warning: A system time change of 0d 1h 19m 53s (forwards in time) has been detected. Compensating... [Mon Oct 5 02:01:56 2009];Warning: A system time change of 0d 2h 29m 29s (forwards in time) has been detected. Compensating... [Tue Oct 6 00:01:49 2009];Warning: A system time change of 0d 0h 23m 1s (forwards in time) has been detected. Compensating... -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] nagios notification to different email address
List,
It has been stated that one can send all notification send to a different
email address by using negative value for parameter.I just wanted to
know would the following setup work? please advise on this.
Nagios version: 3.2
Ndoutils version: 1.4.8
define hostescalation{
hostgroup_namehostgroup A, hostgroup B
contact_groups nocemail
first_notification -1
last_notification 0
notification_interval 15
escalation_period 24x7
escalation_options d,r
}
--
Cordially,
Shadhin Rahman
--
Come build with us! The BlackBerryreg; Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9#45;12, 2009. Register now#33;
http://p.sf.net/sfu/devconf___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] nagios notification to different email address
My problem,
I am trying to send a down and recovery message to a different contact
group than what is defined in host definition. Also I want to send only one
email to the new contact group. In the example below host A has contact
group C defined. However I want send my notification to contact group D.
Thanks
I have a host definiton like
define host {
host_name A
hostgroups X
alias A
address A
contact_groups C
check_period24x7
check_interval 15
retry_interval 3
max_check_attempts 3
notification_period extended
notification_interval 30
notification_optionsd,r,f
notifications_enabled 1
check_command check-host-alive
}
I have a host escalation definition
define hostescalation{
hostgroup_nameX
contact_groups D
first_notification -1
last_notification 1
notification_interval 0
escalation_period 24x7
escalation_options d,r
}
On Tue, Sep 22, 2009 at 4:14 PM, Marc Powell m...@ena.com wrote:
Please always respond on list. More below.
On Sep 22, 2009, at 2:56 PM, shadih rahman wrote:
It has been stated that one can send all notification send to a
different email address by using negative value for parameter.I
just wanted to know would the following setup work? please advise
on this.
It has been mentioned here. Please advise on this. Thanks
http://ideas.nagios.org/akira/dtd/12252-3955
I'm not sure how you interpreted that to mean to put a '-1' for
first_notification or even how it relates to your post. Your
interpretation will not work AFAIK.
The post you reference is about limiting the maximum number of
notifications sent to a contact. Your original question appears to be
asking about how to send all notifications to 'an email address'. They
appear to be opposite problem statements.
Please restate your question, being as clear as you can about what
you're trying to accomplish. For example, does 'all notifications'
mean all notifications nagios would normally send for a specific
service or a notification for every single non-OK service check? Does
it mean all notifications for any host or service should all go to an
arbitrary e-mail address? Does 'to an e-mail address' mean to a
defined contact who is already in a contactgroup for that service or
some other address?
On the face of it, it seems to me you might just need to define a new
contact and associate them with the host/service they should receive
notifications about.
P.S. I don't use escalations so be sure to respond to the list so that
you expose your question to people who are more familiar with them,
should escalations end up being what you need.
--
Marc
--
Come build with us! The BlackBerryreg; Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9#45;12, 2009. Register now#33;
http://p.sf.net/sfu/devconf
___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null
--
Cordially,
Shadhin Rahman
--
Come build with us! The BlackBerryreg; Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9#45;12, 2009. Register now#33;
http://p.sf.net/sfu/devconf___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios not sending any notification.
With this configuration only nagiosadmin will get the email. You need to define contact group properly. Please see the following documentation. Thanks http://nagios.sourceforge.net/docs/3_0/objectdefinitions.html#contact and also see contactgroup definition On Tue, Sep 22, 2009 at 4:14 PM, Deepak Joshi djos...@hotmail.com wrote: PFA, the file. Please let me know if you need anything else. -- Date: Tue, 22 Sep 2009 16:08:35 -0400 Subject: Re: [Nagios-users] Nagios not sending any notification. From: shadhi...@gmail.com To: djos...@hotmail.com Can you please provide your contact.cfg file. Thanks On Tue, Sep 22, 2009 at 4:02 PM, Deepak Joshi djos...@hotmail.com wrote: It's enabled. PFA the screen shot. Please help me to resolve this. -- Date: Tue, 22 Sep 2009 15:12:00 -0400 Subject: Re: [Nagios-users] Nagios not sending any notification. From: shadhi...@gmail.com To: djos...@hotmail.com click on tactical overview from the left hand side and see if you have nagios notification enable or disabled. On Tue, Sep 22, 2009 at 2:40 PM, Deepak Joshi djos...@hotmail.com wrote: Hi, Can anybody help me to find out why my Nagios not sending any notification. We are using nagios 3.03 with Ubantu. I can see that in the logs Nagios is monitoring our our server but not sending any notification. Secondly, If I am sending a mail directly from a command line to all the users listed on commands.cfg, we all are getting e-mail. Can anybody helps me to understand the problem? -- Get a 360o view of the world, in perspectives only MSN India can offer. Try it! http://in.msn.com -- Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- One peek at MSN India brings you up to speed with what's hot in the world today Drag n' drop http://in.msn.com -- Cordially, Shadhin Rahman -- One peek at MSN India brings you up to speed with what's hot in the world today Drag n' drop http://in.msn.com -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Power Strips and Nagios
We are using the following product for power panel related monitoring. It has snmp module which you can monitor. Here is the link http://www.raritan.com/support/dominion-px/1.3.1/MIB/ Also for older power strip without snmp you can use this device to get power related data. I hope this helps. http://www.csimn.com/CSI_pages/BB100.html On Mon, Sep 21, 2009 at 1:29 PM, Seth P. Low l...@modog.com wrote: Hello, We would like to monitor individual power strips in the datacenter for load. Does anyone have and product recommendations for power strips which can be monitored by Nagios (SNMP I assume). Thanks, -Seth -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] orphaned
Eduardo, you should check Performance Info tab on the left pane. I am guessing your check latency is very high. Anyhow, I have ran into this situation in the past. Here are some things to check. 1) Increase debug information in your log and check nagios debug log. 2) Are you using NSCA, if you are make sure this is configured properly 3) Are you using Ndoutils, make sure the connection for ndoutils are correct and database is not experiencing any performance issue. 4) play around with the following parameters in your nagios.cfg check_result_reaper_frequency=10 max_check_result_reaper_time=20 5) make sure you read this document. http://nagios.sourceforge.net/docs/3_0/tuning.html On Mon, Sep 14, 2009 at 6:25 PM, Eduardo Barreto lec...@gmail.com wrote: Hi All, Nagios may seems to be working fine, but o nagios.log I'm getting this message initerrupted, does anyone can help me on this? Nagios 3.0.6 running on Slackware 12.2 kernel 2.6.27.7-smp Warning: The check of service 'xxx' on host 'xxx' looks like it was orphaned (results never came back). I'm scheduling an immediate check of the service... Thanks in advance. Eduardo Barreto -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] nagios scheduling and Hard/soft state question
All, according to the definition hard state is reached upon completing the max_check_attempt . This particular service status information is stating otherwise. This particular service check has max_check_attempt set to 3. However it looks like soft state changed into Hard with checking for 3 times. Is this a bug or am I missing something here. Please advise on this. Thanks [09-02-2009 13:58:30] SERVICE ALERT: Host B;batteryliebert;WARNING;HARD;1;Status is a WARNING level - SNMP OID does not exist [image: Service Warning][09-02-2009 13:56:30] SERVICE ALERT: HOSTA;batteryliebert;WARNING;SOFT;1;Status is a WARNING level - SNMP agent not responding -- Cordially, Shadhin Rahman -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] nagios scheduling and Hard/soft state question
I don't have is_volatile enabled. Below I am pasting my log entries and
service definition. Thanks
*log entries*
[1251777600] CURRENT HOST STATE: HOST A;UP;HARD;1;FPING OK - HOST A
(loss=0%, rta=0.85 ms)
[1251777600] CURRENT SERVICE STATE: HOST A;batteryliebert;OK;HARD;1;Status
is OK - GXT2-2000RT120 - STATUS NORMAL -
[1251777600] CURRENT SERVICE STATE: HOST A;capacity;OK;HARD;1;SNMP OK - 100
[1251777600] CURRENT SERVICE STATE: HOST A;output_current;OK;HARD;1;SNMP OK
- 32 0.1 RMS Amp
[1251777600] CURRENT SERVICE STATE: HOST A;search_aid;OK;HARD;1;(null)
[1251777600] CURRENT SERVICE STATE: HOST A;temp;OK;HARD;1;SNMP OK - 32
[1251914190] SERVICE ALERT: HOST A;batteryliebert;WARNING;SOFT;1;Status is a
WARNING level - SNMP agent not responding
[1251914200] HOST ALERT: HOST A;DOWN;SOFT;1;FPING CRITICAL - HOST A
(loss=100% )
[1251914310] SERVICE ALERT: HOST A;batteryliebert;WARNING;HARD;1;Status is a
WARNING level - SNMP OID does not exist
[1251914390] HOST ALERT: HOST A;DOWN;SOFT;2;FPING CRITICAL - HOST A
(loss=100% )
[1251914580] HOST ALERT: HOST A;UP;SOFT;3;FPING WARNING - HOST A
[1251914600] SERVICE ALERT: HOST A;batteryliebert;OK;HARD;1;Status is OK -
GXT2-2000RT120 - STATUS NORMAL -
[1251915210] SERVICE ALERT: HOST A;batteryliebert;WARNING;SOFT;1;Status is a
WARNING level - SNMP OID does not exist
[1251915330] SERVICE ALERT: HOST A;batteryliebert;WARNING;SOFT;2;Status is a
WARNING level - SNMP agent not responding
[1251915440] SERVICE ALERT: HOST A;batteryliebert;OK;SOFT;3;Status is OK -
GXT2-2000RT120 - STATUS NORMAL -
*service definition*
define service {
host_name HOST A
service_description batteryliebert
check_periodnoncritical
check_command check_liebert_ups
contact_groups netsys
notification_period extended
initial_state o
check_interval 5.00
retry_interval 2.00
max_check_attempts 3
is_volatile 0
parallelize_check 1
active_checks_enabled 1
passive_checks_enabled 1
obsess_over_service 1
event_handler_enabled 1
low_flap_threshold 0.00
high_flap_threshold 0.00
flap_detection_enabled 1
flap_detection_options o,c
freshness_threshold 0
check_freshness 0
notification_optionsc,r,f
notifications_enabled 1
notification_interval 30.00
first_notification_delay0.00
stalking_optionsn
process_perf_data 1
failure_prediction_enabled 1
retain_status_information 1
retain_nonstatus_information1
}
On Thu, Sep 3, 2009 at 4:04 PM, Marc Powell m...@ena.com wrote:
On Sep 3, 2009, at 2:29 PM, shadih rahman wrote:
All,
according to the definition hard state is reached upon completing
the max_check_attempt . This particular service status information
is stating otherwise. This particular service check has
max_check_attempt set to 3. However it looks like soft state
changed into Hard with checking for 3 times. Is this a bug or am I
missing something here. Please advise on this. Thanks
[09-02-2009 13:58:30] SERVICE ALERT: Host
B;batteryliebert;WARNING;HARD;1;Status is a WARNING level - SNMP OID
does not exist
[09-02-2009 13:56:30] SERVICE ALERT:
HOSTA;batteryliebert;WARNING;SOFT;1;Status is a WARNING level - SNMP
agent not responding
Do you have 'is_volatile' enabled? Please post the entire service
definition from objects.cache if you do not as well as a few prior log
entries for this service.
--
Marc
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus
on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null
--
Cordially,
Shadhin Rahman
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
Re: [Nagios-users] check_http and regular expressions
Here is command line definition which works fine for what you are trying to
achieve.
define command{
command_namecheck_https_reverse
command_line$USER1$/check_http -H $HOSTADDRESS$ -S -u $ARG1$ -r
$ARG2$ -r $ARG3$ --invert-regex
}
On Thu, Aug 27, 2009 at 9:30 PM, Marc Powell m...@ena.com wrote:
On Aug 27, 2009, at 5:27 PM, Masoud Tabrizi wrote:
I am running the command as you suggested but it seems like there is
something missing; what am I doing wrong?
Nothing, you just don't know how nagios determines status. It's not
the plugin text output, that's just for humans. Nagios determines OK,
CRITICAL, etc from the exit code of the plugin.
All commans are run from /usr/lib/nagios/plugins directory;
/usr/lib/nagios/plugins/check_http -H x -u /sample/test.html -p
80 –a user:password -s TAPE
Response:
HTTP OK HTTP/1.1 200 OK - 0.018 second response time |
time=0.018116s;;;0.00 size=3648B;;;0
echo $? - should be 0
Now I run it with negate as you suggested:
./negate /usr/lib/nagios/plugins/check_http -H x -u /sample/
test.html -p 80 –a user:password -s TAPE
HTTP OK HTTP/1.1 200 OK - 0.006 second response time |
time=0.006001s;;;0.00 size=3648B;;;0
echo $? - should be 2
--
Marc
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus
on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null
--
Cordially,
Shadhin Rahman
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] number of notifications
All, Is there anyway to control the total number of notification that nagios sends for hosts or services? I did not see any indication of such parameter in object definition documentation. Please advise on this. Thanks -- Cordially, Shadhin Rahman -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] ndo nagios failover
All, I have two machines which are responsible for nagios monitoring. One is master and one is fail over. I am also keeping historical data in NdoUtils. I am using mysql for Ndoutils and they have master-master replication. So in master I have active check and active notification enabled. In fail over just the nagios process is running but there is no active check and active notification. Both have identical configurations. My question is Host A (master) is running NdoUtils and Host B (failover) is also running NdoUtils. Although I have master-master replication, but is there any possibility of proper copying of data from master to failover database? Please advise on this. Thanks -- Cordially, Shadhin Rahman -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] check ping unusual issue
I think I have found the problem, Please see the following theread
http://article.gmane.org/gmane.network.nagios.plugins.devel/6738
On Wed, Aug 19, 2009 at 9:54 AM, shadih rahman shadhi...@gmail.com wrote:
I am using nagios-3.0.6 and nagios plugins-1.4.13
As suggested I have read the check_ping man page. However having critical
warning is not the cause of the problem. We chose to keep both warning
and critical same because we want all ping issues to become critical. Below
is an example like you suggested. The question is how can you have 75%
packet loss, when you are sending one packet. Please advise on this.
Thanks
check_ping -H HostA -t 45 -4 -w 200.0,30% -c 300.0,40% -p 1
PING CRITICAL - Packet loss = 75%, RTA = 2.17
ms|rta=2.168000ms;200.00;300.00;0.00 pl=75%;30;40;0
On Tue, Aug 18, 2009 at 8:37 PM, Morris, Patrick patrick.mor...@hp.comwrote:
On Tue, 18 Aug 2009, shadih rahman wrote:
All,
My check ping result is not making sense. I have the following in
commands.cfg
define command{
command_namecheck-host-alive
command_line$USER1$/check_ping -H $HOSTADDRESS$ -t 45 -4 -w
3000.0,100% -c 3000.0,100% -p 1
}
However I see the following output
Mon Aug 17 13:06:34 2009];HOST ALERT: HostA;UP;SOFT;2;PING OK - Packet
loss = 87%, RTA = 2.09 ms
[Mon Aug 17 13:09:24 2009];HOST ALERT: Host B;DOWN;SOFT;2;PING CRITICAL
- Packet loss = 94%, RTA = 4001.56 ms
[Mon Aug 17 13:14:44 2009];HOST ALERT: Host C;UP;SOFT;3;PING OK -
Packet loss = 93%, RTA = 1.15 ms
[Mon Aug 17 13:55:14 2009];HOST ALERT: Host D;UP;SOFT;2;PING OK -
Packet loss = 83%, RTA = 2.19 ms
How can I have 87 % packet loss when I am sending only on packet. Can
someone please explain this to me. Thanks in advance.
Which version of the plugins are you using, on which version of Nagios?
There have been bugs in some versions of the plugin that might cause
results like that, but there's not enough information here to know if
that's the case with your issue.
--
Cordially,
Shadhin Rahman
--
Cordially,
Shadhin Rahman
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] check ping unusual issue
All,
My check ping result is not making sense. I have the following in
commands.cfg
define command{
command_namecheck-host-alive
command_line$USER1$/check_ping -H $HOSTADDRESS$ -t 45 -4 -w
3000.0,100% -c 3000.0,100% -p 1
}
However I see the following output
Mon Aug 17 13:06:34 2009];HOST ALERT: HostA;UP;SOFT;2;PING OK - Packet loss
= 87%, RTA = 2.09 ms
[Mon Aug 17 13:09:24 2009];HOST ALERT: Host B;DOWN;SOFT;2;PING CRITICAL -
Packet loss = 94%, RTA = 4001.56 ms
[Mon Aug 17 13:14:44 2009];HOST ALERT: Host C;UP;SOFT;3;PING OK - Packet
loss = 93%, RTA = 1.15 ms
[Mon Aug 17 13:55:14 2009];HOST ALERT: Host D;UP;SOFT;2;PING OK - Packet
loss = 83%, RTA = 2.19 ms
How can I have 87 % packet loss when I am sending only on packet. Can
someone please explain this to me. Thanks in advance.
--
Cordially,
Shadhin Rahman
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] groups acknowledgment on web enterface
All, I am running nagios version 3.0.6. When in hostgroup or servicegroup window on web interface like https://example.com/nagios/cgi-bin/extinfo.cgi?type=5hostgroup=example-groups, there is no option to do group acknowledgment. Are we offering this option in nagios 3.2.0? I think this is a very useful feature that all can appreciate. Please advise on this. Thanks -- Cordially, Shadhin Rahman -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] obama biden health plan
forwarded to cynthia www.barack*obama*.com/pdf/issues/*HealthCare*FullPlan.pdf -- Cordially, Shadhin Rahman -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] parent/child host relationship and vif
I am monitoring bunch of vif which is served by one actual host. Is it possible to achieve the following just by defining host/service definition host - A vif1.com has parent A vif2.com has parent B vif3.com has parent C I am checking the following url with check_http plugin vif1.com/someurl vif2.com/someurl vif3.com/someurl What I am trying to achieve is that if host A goes down none of services with all three vif will not alert since they have parent/child relationship. Please advise on this. thanks -- Cordially, Shadhin Rahman -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] NDOUtils mysql question?
I would double check these information. Cacti runs on rrd( round robin database). I have innodb for my ndoutils 1.47b. On Fri, Aug 7, 2009 at 3:03 PM, Andrew Davis ncc...@gmail.com wrote: Our Nagios server also has Cacti on it. I'm pretty sure that Cacti uses an InnoDB database, while NDOUtils uses myISAM. The two are backed up differently (example: mysqlhotcopy doesn't working on InnoDB databases). Does anyone know what mysql command you run to determine which type of DB is used for various databases, especially considering you can run multiple types at once? I know I can use mysqlshow or the show databases; options to show the databases themselves, but it doesn't list the DB type. Using mysqlshow with a -t and a DB name shows the table types, but again, not the database types. I'm sort of stuck on this. I want to make sure I know what DB types I'm dealing with so I can ensure I'm backing them up properly. Google searches aren't helping... the results all go back to the mysql versus innodb debate... -- A. Davis Email: ncc...@gmail.com There is no limit to what a man can accomplish if he doesn't care who gets the credit. - Ronald Reagan -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] ndoutils upgrade
I am thinking about doing a ndoutils update to 1.48b from 1.47b. I see that I need to change db schema and make some changes. my ndo has been collecting data over 6 months for medium size installation. Should I be concerned or take special pre-caution? Please advise on this. Thanks -- Cordially, Shadhin Rahman -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Help with check_cluster plugin
I am trying to monitor 3 exchange server and combined them with
check_cluster to report if there was any issue with them or not. If any of
my exchange server is down then my check_cluster should report down. So I
have 3 individual exchange checks as listed below
define service {
useuse-standard
host_nameEXCHANGE1.com
service_description executive_exchange_check
servicegroupsexchangecheck
check_command
check_email_service!nagios-ex1!something!pasword
contact_groups standard
}
define service {
useuse-standard
host_nameEXCHANGE2.com
service_description executive_exchange_check
servicegroupsexchangecheck
check_command
check_email_service!nagios-ex2!something!password+
contact_groups standard
}
define service {
useuse-standard
host_nameEXCHANGE3.com
service_description executive_exchange_check
servicegroupsexchangecheck
check_command
check_email_service!nagios-ex3!something!password
contact_groups standard
}
Now I have the following check_cluster check.
define service {
use standard
service_description exchangestatus
servicegroups Executive_dashboard
check_command
check_cluster_service!exchangecheck!0:0!0:0!$SERVICESTATEID:CUIT-EXCHANGE1.com:executive_exchange_check,$SERVICESTATEID:CUIT-EXCHANGE2.com:executive_exchange_check,$SERVICESTATEID:CUIT-EXCHANGE3.com:executive_exchange_check$
contact_groups atg
}
First, my cluster check exchangestatus . does it need any association with
any hostgroup? I want Executive_dashboard servicegroup to show only one
exchangestatus check not three. I set the warnning and critical to be 0:0
and 0:0. I want anything but OK state to alert me. Is my threshold
setting correct? Please advise on this. Thanks
--
Cordially,
Shadhin Rahman
--
___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] checking exchange server
All, I am trying to monitor complete email path for exchange from sending to delivery. Something like the check_email_delivery plugin. http://apricoti.pbworks.com/NagiosCheckEmailDelivery. I am not sure about the Exchange functionality. Can someone shed some light on this. Thanks -- Cordially, Shadhin Rahman -- Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] nagios log file date format
Is there any way to change nagios log file date format to human readable format. I did not see any option in nagios.cfg file. Please advise on this. Thanks -- Cordially, Shadhin Rahman -- Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] check ping explanation required
Nagios uses check_ping for the host check of most hosts.
The check is configured to send only one ping.
So if Nagios receives a response, it is 0% packet loss.
If no response, it is 100% packet loss.
# 'check-host-alive' command definition
define command{
command_namecheck-host-alive
command_line$USER1$/check_ping -H $HOSTADDRESS$ t 45 -4 -w
3000.0,100% -c 3000.0,100% -p 1
}
Yet, Nagios reports:
p...@bway2852-3-1.net.columbia.edu:2009-06-30 23:24:33:PING
OK - Packet loss = 85%, RTA = 47.06 ms
How is it possible for Nagios to lose 85% of one ping?
--
Cordially,
Shadhin Rahman
--
Enter the BlackBerry Developer Challenge
This is your chance to win up to $100,000 in prizes! For a limited time,
vendors submitting new applications to BlackBerry App World(TM) will have
the opportunity to enter the BlackBerry Developer Challenge. See full prize
details at: http://p.sf.net/sfu/Challenge___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] a special http check
All, I need to do a special kind of http check to see if our authentication service is working or not. These are the sequence of event need to take place. I need to hit the url https://myserver.com/login then I need do additional query service=myservice then I need to additinal query to validattion url https://myserver.com/validate here I will add additional query with my username and password. then I want to check the http response and search for the string yes Can this be done using check_http or do I need a custom check? Please advise on this. Thanks -- Cordially, Shadhin Rahman -- Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/blackberry___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] monitoring load balanced url
All, I am trying to monitor an url which is load balanced behind csm. I want it go to warnning state if 50% of the servers are unavailable behind csm. Can someone please give me some suggestion how I can achieve this. Thanks -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] monitoring load balanced url
All, I thought of this approach. I will create a service call 'check_public_url' on host1, host2, host3, host4, and etc. Then I would create another check which will use check_cluster plugin to check the service status like below ./check_cluster -s check_public_url -d -w 0:50 -c 50:75 Am I approaching the right solution? Please advise on this. thanks On Thu, Jul 2, 2009 at 9:20 AM, shadih rahman shadhi...@gmail.com wrote: All, I am trying to monitor an url which is load balanced behind csm. I want it go to warnning state if 50% of the servers are unavailable behind csm. Can someone please give me some suggestion how I can achieve this. Thanks -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] monitoring external internet connectivity
All, What is the best way to check if our network has connection to commodity internet or not. What I am trying to achieve is to ensure internal network has connection to Internet. One thing is to ping google check. Is this a good idea or can someone suggest a better way to do this. Please advise on this. Thanks -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] ndo utils question
All, in case anyone is interested. I solved the problem. My config_output_options' was set to zero in ndomod.cfg. If you set to 1 or 3 depending on your need then it works fine. Thanks On Mon, Jun 15, 2009 at 2:50 PM, shadih rahman shadhi...@gmail.com wrote: I am running nagios version 3.0.6 and ndoutils 1.47b. My nagios is running properly without any error. However in my ndoutils database I am seeing is_active is always 0. Can someone direct me to right direction to solve this problem. Thanks On Fri, Jun 12, 2009 at 12:38 PM, shadih rahman shadhi...@gmail.comwrote: Can someone please tell me why am I seeing all my nagios_objects are shwoing is_active 0 in nagios_objects table of my ndoutils database? Thanks in advance. On Wed, Jun 10, 2009 at 11:17 AM, shadih rahman shadhi...@gmail.comwrote: is_active shows 0 for all my entries nagios_object. Can someone tell me if is it due configuration issue or a bug? Please advise on this. Thanks On Tue, Jun 9, 2009 at 1:04 PM, Andreas Ericsson a...@op5.se wrote: shadih rahman wrote: All, I have been running ndoutils with nagios for a while. When I initially setup my nagios, I played around with a lot of different service checks and changed around a lot of config parameters. Now, I have a solid setup and I have not changed configuration for a while. When I go into the database and look at nagios_objects tables, I see all sorts of old objects which do not exist in my current setup. Does ndoutils clean up and throw away old config when we start nagios? No, but it marks them as inactive (or some such). -- Andreas Ericsson andreas.erics...@op5.se OP5 AB www.op5.se Tel: +46 8-230225 Fax: +46 8-230231 Considering the successes of the wars on alcohol, poverty, drugs and terror, I think we should give some serious thought to declaring war on peace. -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] dynamic service name creation
All, I am trying to create my service name dynamically. Can someone tell me a clever way to do. What I am tyring to achive is the following. I have a servicename outlet1outputcurrent. Outlet1 is connected to host1. I can get the hostname for host1 by doing a snmp query. Somehow I want to generate the servicename to say host1outputcurrent. Is it possible to do this using check_snmp plugin. Please advise on this. Thanks -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Nagios check for CAS service
All, I want to monitor CAS authentication service with nagios. Can someone give me some idea how to do this. We are using something call wind authentication which is based on CAS authentication. http://www.columbia.edu/acis/rad/authmethods/wind/. I am wondering if there is anyway to check if wind service is working or not. Thanks in advance. -- Cordially, Shadhin Rahman -- Are you an open source citizen? Join us for the Open Source Bridge conference! Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250. Need another reason to go? 24-hour hacker lounge. Register today! http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Issue with NRPE
Sharada, check the permission on the monitoring server for the actual plugin you are calling. Make sure check_nrpe has the proper permission. Also make sure you have the right version of nrpe and nrpe plugin. The nrpe server and the check_nrpe has to be same version. I always found it easy to install it from the source than working with prebuilt package. I hope this works for you. Thanks On Mon, Jun 15, 2009 at 10:10 AM, Sharada vittal.shar...@gmail.com wrote: Hi, On my monitoring server Nagios is monitoring 3 remote servers. NRPE check is working fine on 2 of them. NRPE was installed using debian packages here. On my 3rd server I have a mail server running Centos 4.5 . I installes NRPE using - nrpe-2.12-3.el4.i386.rpm. ( rpm -ivh nrpe-2.12-3.el4.i386.rpm ). I also had my nagios plugins which I moved to /usr/share/nagios/plugins/ [ nagios/ and nagios/plugins in /ush/share was manualy created by me ] The /etc/nagios/nrpe.cfg has been configured to allow monitoring server to access it. NRPE is running on the mail server - /usr/sbin/nrpe -c /etc/nagios/nrpe.cfg -d Now, On the monitoring server I see SSL handshake issue with NRPE. So, tried - /check_nrpe -n -H hostname Now I get error saying - CHECK_NRPE: Error receiving data from daemon On the mail servr itself I get this error : ./check_nrpe -H localhost ./check_nrpe: error while loading shared libraries: libssl.so.0.9.8: cannot open Should I install anything else on the mail server? thanks! -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] ndo utils question
I am running nagios version 3.0.6 and ndoutils 1.47b. My nagios is running properly without any error. However in my ndoutils database I am seeing is_active is always 0. Can someone direct me to right direction to solve this problem. Thanks On Fri, Jun 12, 2009 at 12:38 PM, shadih rahman shadhi...@gmail.com wrote: Can someone please tell me why am I seeing all my nagios_objects are shwoing is_active 0 in nagios_objects table of my ndoutils database? Thanks in advance. On Wed, Jun 10, 2009 at 11:17 AM, shadih rahman shadhi...@gmail.comwrote: is_active shows 0 for all my entries nagios_object. Can someone tell me if is it due configuration issue or a bug? Please advise on this. Thanks On Tue, Jun 9, 2009 at 1:04 PM, Andreas Ericsson a...@op5.se wrote: shadih rahman wrote: All, I have been running ndoutils with nagios for a while. When I initially setup my nagios, I played around with a lot of different service checks and changed around a lot of config parameters. Now, I have a solid setup and I have not changed configuration for a while. When I go into the database and look at nagios_objects tables, I see all sorts of old objects which do not exist in my current setup. Does ndoutils clean up and throw away old config when we start nagios? No, but it marks them as inactive (or some such). -- Andreas Ericsson andreas.erics...@op5.se OP5 AB www.op5.se Tel: +46 8-230225 Fax: +46 8-230231 Considering the successes of the wars on alcohol, poverty, drugs and terror, I think we should give some serious thought to declaring war on peace. -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] ndo utils question
Can someone please tell me why am I seeing all my nagios_objects are shwoing is_active 0 in nagios_objects table of my ndoutils database? Thanks in advance. On Wed, Jun 10, 2009 at 11:17 AM, shadih rahman shadhi...@gmail.com wrote: is_active shows 0 for all my entries nagios_object. Can someone tell me if is it due configuration issue or a bug? Please advise on this. Thanks On Tue, Jun 9, 2009 at 1:04 PM, Andreas Ericsson a...@op5.se wrote: shadih rahman wrote: All, I have been running ndoutils with nagios for a while. When I initially setup my nagios, I played around with a lot of different service checks and changed around a lot of config parameters. Now, I have a solid setup and I have not changed configuration for a while. When I go into the database and look at nagios_objects tables, I see all sorts of old objects which do not exist in my current setup. Does ndoutils clean up and throw away old config when we start nagios? No, but it marks them as inactive (or some such). -- Andreas Ericsson andreas.erics...@op5.se OP5 AB www.op5.se Tel: +46 8-230225 Fax: +46 8-230231 Considering the successes of the wars on alcohol, poverty, drugs and terror, I think we should give some serious thought to declaring war on peace. -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] ndo utils question
All, I have been running ndoutils with nagios for a while. When I initially setup my nagios, I played around with a lot of different service checks and changed around a lot of config parameters. Now, I have a solid setup and I have not changed configuration for a while. When I go into the database and look at nagios_objects tables, I see all sorts of old objects which do not exist in my current setup. Does ndoutils clean up and throw away old config when we start nagios? Please advise on this. Thanks -- Cordially, Shadhin Rahman -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] nagios monitoring for hack
our web sites got hacked and we were subjected to ddos for last few days. I wanted to know what can I do for monitoring to find out if I am hacked or not. By the way, we were hacked by php exploits. Please advise on this. Thanks -- Cordially, Shadhin Rahman -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] nagios command line script
All, I just added a perl Nagios command line script in nagiosexchange.org. The script uses Nagios-Object cpan module. However, I made modification to the Nagios-Object cpan module to work with nagios version 3. Detail installation instruction is included in nagiosexchange link. http://www.monitoringexchange.org/cgi-bin/page.cgi?g=Detailed%2F3083.html;d=1 or you can do a search on nagiosexchange with the word ncom. The usage for this script is listed below. Thanks Usage: sage: /usr/local/bin/ncom action serv...@host commnent where: service the name of the service we are checking host Name of the host we are checking commment Comment we want to pass to the action check: Immediately recheck service, host, serv...@host (no state update on run) reschedule:Reschedule service, host, serv...@host (state update on run) acknowledge: Acknowledge current alert for service, host, serv...@host unacknowledge: Undo acknowledge for service, host, serv...@host inhibit: Silence all alerts for service, host, serv...@host uninhibit: Undo inhibit for service, host, serv...@host checkhistory: check history of particular check alerthistory: check history of notificaitons commandhistory:check history of commands executed on particular check -- Cordially, Shadhin Rahman -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp asthey present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://www.creativitycat.com ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] nagios exchange publishing question
All, I have a quick question about licensing and trademarks. If I publish some scripts in nagiosexchange.org what license or trademark am I publishing under? Please advise on this. -- Cordially, Shadhin Rahman -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] DISABLE_SVC_CHECK does not keep track of username
All I am seeing that when anyone acknowledges a problem in nagios, it keeps track of username and notes information. However if someone execute command like DISABLE_SVC_CHECK or DISABLE_HOST_NOTIFICATIONS or many other commands then nagios does not keep track of username and who initiated the command. Is this an intended behavior or is it a bug? Can someone please comment on this. Thanks -- Cordially, Shadhin Rahman -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Help with graphing
All, I am running nagios with ndoUtils. Ndo has been capturing data for about 6 months. Now I need find a good graphing utility that can be integrated with nagios. I am looking for graphing capability from traditional database not rrd utility. Can someone suggest or point me to the right direction. Thanks in advance. -- Cordially, Shadhin Rahman -- The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] nagios and mysql
Thiery, how does your ndomod.cfg and ndo2db.cfg looks like? Thanks On Sat, May 9, 2009 at 6:37 PM, Thierry Granier th.gran...@free.fr wrote: Hello i have installed NDOutils and i can run ndo2db-3x but i have this message in the log: ndomod: Error writing to data sink! Some output may get lost. 3996 queued items to flush. The database nagios is empty Thanks for your help Thierry -- The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Required RPMs for Nagios 2.5
If you are using RHEL machine. The followings are probably basic pre-recs 1) perl-Net-SNMP 2) perl-Socket6 3) perl-Crypt-DES 4) fping On Mon, May 11, 2009 at 9:14 PM, jmose...@corp.xanadoo.com wrote: If you've installed everything, including Nagios, via RPM/yum/up2date, then you should get a warning if upgrading some packages will interfere with Nagios. Assuming you've installed Nagios via RPM/up2date, then you can do: rpm -qa | grep nagios To see what Nagios-related packages you have installed. Then do a: rpm -qR nagios package name to see what packages Nagios requires. That's actually going to show what libraries and binaries are needed by Nagios, not the actual package names. If you installed Nagios by source, then you'll need to find a Nagios 2.5.x RPM, download it (don't install it)t, and do a: rpm -qpR rpm file to find out what it requires. Better yet, go to the package maintainers website and find the spec file that was used to build the RPM to find out what packages are required to install the RPM. James Moseley Karen Tsai hyt...@stanford.edu wrote: Hi, We are running Nagios 2.5 on Linux x86. We would like to get a list of RPMs required for Nagios if there are any. We are trying to get this information in preparation for the Linux up2date patching, in order to evaluate if the up2date patching would possibly impact the Nagios. Does anyone know if there are any required RPMs? -- The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] cricket ndo2db
All, I am looking for a good way to show trending of performance data. I am keeping all service and host check data in ndo database. Are there any software out there which possible works with cricket ndo2db and nagios. As far as I understand NPC is for cacti only, however we have only cricket in our organization. Please advise on this. Thanks -- Cordially, Shadhin Rahman -- The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] nag2ast
Did you find any English documentation on nag2ast? Please advise on this. Thanks On Tue, May 5, 2009 at 11:12 AM, cr...@hooters-uk.com cr...@hooters-uk.comwrote: Hi All I'm about to venture into Asterisk so I can use nag2ask, but before I go and install Asterisk has anybody got nag2ask working with Trixbox at all, just seems a simpler router for us to use instead of trying to teach our guys Asterisk then can you Trixbox's GUI Thanks all Craig -- The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Odd errors in nagios.log
Martin, were you able to solve this problem by changing check_result_reaper value? I am also receiving the following error. Thansk [1241449457] Error: Unable to rename file '/var/log/nagios/nagios.debug' to '/var/log/nagios/nagios.debug.old': No such file or directory [sr2...@]ls -ld . drwxrwxr-x 6 nagios nagios 4096 May 4 11:07 . [sr2...@x]ls -l |grep nagios drwxrwxr-x 2 nagios nagios4096 May 1 00:00 archives drwxrwxr-x 2 nagios nagios4096 Oct 18 2008 cache -rw-rw-r-- 1 nagios nagios 842929 May 4 11:08 nagios.debug -rw-rw-r-- 1 nagios nagios 159 May 4 11:07 nagios.debug.old -rwxrwxr-x 1 nagios nagios 1753614 May 4 11:05 nagios.log -rwxrwxr-x 1 nagios nagios 0 Apr 27 14:52 ndo2db.debug -rwxrwxr-x 1 nagios nagios 0 May 4 11:00 ndomod.tmp srwxrwxr-x 1 nagios nagios 0 May 1 14:53 ndo.sock -rwxrwxr-x 1 nagios nagios 5566455 May 4 11:00 objects.cache -rwxrwxr-x 1 nagios nagios 5208995 Apr 9 10:04 objects.precache -rw--- 1 nagios nagios 8833834 May 4 11:00 retention.dat drwxrwxrwx 2 nagios nagios4096 May 4 11:00 rw drwxrwxr-x 3 nagios nagios4096 Oct 18 2008 spool -rw-rw-r-- 1 nagios nagios 8847207 May 4 11:08 status.dat On Fri, Apr 17, 2009 at 11:03 AM, Marc Ismael marcism...@gmail.com wrote: On Thu, Apr 16, 2009 at 5:43 PM, Martin A. Brooks mar...@antibodymx.netwrote: Jim Avery wrote: You don't have more than one instance of the Nagios daemon running do you? Try stopping the Nagios daemon, make sure all instances of nagios are stopped (using ps -ef | grep nagios), and kill any which remain then start the Nagios daemon using /etc/init.d/nagios start . I looked for the before, and there's definitely only one nagios instance running. The problem persists across nagios restarts and reboots. Thanks -- Martin A. Brooks | http://www.antibodymx.net/ | Anti-spam anti-virus Consultant| mar...@antibodymx.net | filtering. Inoculate antibodymx.net | m: +447792493388 | your mail system. try playing around with your check_result_reaper_* timings. I have a feeling that your check results are already stale before the reaper gets a chance to process them. tip: for a while, try setting max_check_result_file_age to 0 and see if you'd still get these errors. if not, then its a timing misconfiguration. cheers, Marc.I -- Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Register Now Save for Velocity, the Web Performance Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Ndoutils only capturing host data, there is no service information
All, I recently discovered that my nagios setup is only storing in nagios_hostchecks table. In my ndomod.cfg file I have selected data_processing_options=67108863, which suppose to process all data. Little overview about my setup I have two mahcine running nagios active failover settings. On mysql side, I have master master replication from both machine. Can someone please advise me on this. I am including my nagios.cfg file, ndo2db.cfg file and ndomod.cfg file. Thanks in advance. My nagios.cfg:: log_file=/var/log/nagios/nagios.log cfg_file=/etc/nagios/commands.cfg cfg_file=/etc/nagios/contacts.cfg cfg_file=/etc/nagios/timeperiods.cfg cfg_file=/etc/nagios/templates.cfg cfg_dir=/etc/nagios/hosts cfg_dir=/etc/nagios/services object_cache_file=/var/log/nagios/objects.cache precached_object_file=/var/log/nagios/objects.precache resource_file=/etc/nagios/resource.cfg status_file=/var/log/nagios/status.dat status_update_interval=60 nagios_user=nagios nagios_group=nagios check_external_commands=1 command_check_interval=-1 command_file=/var/log/nagios/rw/nagios.cmd external_command_buffer_slots=4096 lock_file=/var/lock/subsys/nagios temp_file=/var/log/nagios/nagios.tmp temp_path=/tmp event_broker_options=8 broker_module=/usr/lib64/nagios/ndomod.o config_file=/etc/nagios/ndomod.cfg log_rotation_method=m log_archive_path=/var/log/nagios/archives use_syslog=1 log_notifications=1 log_service_retries=1 log_host_retries=1 log_event_handlers=1 log_initial_states=0 log_external_commands=1 log_passive_checks=1 service_inter_check_delay_method=s max_service_check_spread=30 service_interleave_factor=s host_inter_check_delay_method=s max_host_check_spread=30 max_concurrent_checks=0 check_result_reaper_frequency=10 max_check_result_reaper_time=20 check_result_path=/var/log/nagios/spool/checkresults max_check_result_file_age=3600 cached_host_check_horizon=15 cached_service_check_horizon=15 enable_predictive_host_dependency_checks=1 my ndo2db.cfg : ndo2db_user=nagios ndo2db_group=nagios socket_type=unix socket_name=/var/log/nagios/ndo.sock tcp_port=5668 db_servertype=mysql db_host=localhost db_port=3306 db_name=nagios db_prefix=nagios_ db_user=nagios db_pass=* max_timedevents_age=1440 max_systemcommands_age=10080 max_servicechecks_age=0 max_hostchecks_age=0 max_eventhandlers_age=44640 debug_level=1 debug_verbosity=0 debug_file=/var/log/nagios/ndo2db.debug max_debug_file_size=100 my nodmod.cfg file instance_name=default output_type=unixsocket output=/var/log/nagios/ndo.sock tcp_port=5668 output_buffer_items=5 buffer_file=/var/log/nagios/ndomod.tmp file_rotation_interval=14400 file_rotation_timeout=60 reconnect_interval=15 reconnect_warning_interval=15 data_processing_options=67108863 config_output_options=0 -- Cordially, Shadhin Rahman -- Register Now Save for Velocity, the Web Performance Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] ups oids that might help
I had to spend a lot of time looking for oids on liebert and on apc upses. I just wanted to share it with the group. *Liebert oids * Description OID DefinitionMIB SOURCE BupsBatteryVoltage 1.3.6.1.2.1.33.1.2.5 The magnitude of the present battery voltage. RFC1628_UPS_MIB.MIB upsInputNumLines 1.3.6.1.2.1.33.1.3.2 The number of input lines utilized in this device. RFC1628_UPS_MIB.MIB upsInputVoltage 1.3.6.1.2.1.33.1.3.3.1.3 The magnitude of the present input voltage.RFC1628_UPS_MIB.MIB upsInputFrequency 1.3.6.1.2.1.33.1.3.3.1.2 The present input frequency. RFC1628_UPS_MIB.MIB upsOutputNumLines 1.3.6.1.2.1.33.1.4.3 The number of output lines utilized in this device RFC1628_UPS_MIB.MIB upsOutputFrequency 1.3.6.1.2.1.33.1.4.2 The present output frequency. RFC1628_UPS_MIB.MIB upsOutputVoltage 1.3.6.1.2.1.33.1.4.4.1.2 The present output voltage.RFC1628_UPS_MIB.MIB upsOutputCurrent 1.3.6.1.2.1.33.1.4.4.1.3 The present output current.RFC1628_UPS_MIB.MIB upsBypassNumLines 1.3.6.1.2.1.33.1.5.2 The number of bypass lines utilized in this device RFC1628_UPS_MIB.MIB upsBypassFrequency 1.3.6.1.2.1.33.1.5.1 The present bypass frequency. RFC1628_UPS_MIB.MIB upsBypassVoltage 1.3.6.1.2.1.33.1.5.3.1.2 The present bypass voltage.RFC1628_UPS_MIB.MIB lgpPwrBatteryVoltage 1.3.6.1.4.1.476.1.42.3.5.2.4.1.4.1 The present battery voltage. LIEBERT_GP_POWER.MIB lgpPwrBatteryNominalVoltage 1.3.6.1.4.1.476.1.42.3.5.2.4.1.6.1 The present battery voltage. LIEBERT_GP_POWER.MIB lgpPwrBatteryCapacity 1.3.6.1.4.1.476.1.42.3.5.1.19 The present percentage of battery capacity.LIEBERT_GP_POWER.MIB lgpPwrMeasurementPointVAPercent 1.3.6.1.4.1.476.1.42.3.5.2.2.1.11 The percentage of the rated apparent AC power of the power LIEBERT_GP_POWER.MIB source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. lgpPwrMeasurementPointNomCurrent 1.3.6.1.4.1.476.1.42.3.5.2.2.1.14 The nominal or configured/expected current of the powerLIEBERT_GP_POWER.MIB point indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. lgpPwrMeasurementPointNomVA 1.3.6.1.4.1.476.1.42.3.5.2.2.1.16 The nominal or configured/expected apparent AC power for LIEBERT_GP_POWER.MIB the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. lgpPwrMeasurementPointNomPowerFactor 1.3.6.1.4.1.476.1.42.3.5.2.2.1.15 The nominal or configured/expected power factor of the power LIEBERT_GP_POWER.MIB point indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. lgpPwrLineMeasurementCurrent 1.3.6.1.4.1.476.1.42.3.5.2.3.1.6 Output Current L1 LIEBERT_GP_POWER.MIB maximum input voltage 1.3.6.1.4.1.476.1.42.3.5.2.3.1.16.1.1 maximum input voltage recorded since LIEBERT_GP_POWER.MIB 'lgpPwrStatisticsReset' was executed. minumum input voltage 1.3.6.1.4.1.476.1.42.3.5.2.3.1.17.1.1 minimum input voltage recorded since LIEBERT_GP_POWER.MIB 'lgpPwrStatisticsReset' was executed. maximum output voltage 1.3.6.1.4.1.476.1.42.3.5.2.3.1.16.3.1 maximum output voltage recorded since LIEBERT_GP_POWER.MIB 'lgpPwrStatisticsReset' was executed. minumum output voltage 1.3.6.1.4.1.476.1.42.3.5.2.3.1.17.3.1 minimum output voltage recorded since LIEBERT_GP_POWER.MIB 'lgpPwrStatisticsReset' was executed. Output Real Load in W 1.3.6.1.4.1.476.1.42.3.5.2.2.1.8.3 output real Load in WattageLIEBERT_GP_POWER.MIB Output Apparant Load in VA 1.3.6.1.4.1.476.1.42.3.5.2.2.1.7.3 output real Load in volt-ampereLIEBERT_GP_POWER.MIB Ambient Temperature in centigrade 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.3.1Ambient temperature in degree centigrade LIEBERT_GP_POWER.MIB * APC well known OIDs * Description OID DefinitionMIB SOURCE upsAdvBatteryCapacity 1.3.6.1.4.1.318.1.1.1.2.2.1 The remaining battery capacity expressed in percent POWERNET-MIB of full capacity. upsAdvBatteryTemperature
Re: [Nagios-users] HTTP server authentication requirements for accessing this CGI.
Jimmy, Try the following and this should take care of it. Thanks ScriptAlias /nagios/cgi-bin /usr/lib/nagios/cgi Alias /nagios /usr/share/nagios Directory /usr/share/nagios # SSLRequireSSL Options None AllowOverride None Order allow,deny Allow from all # Order deny,allow # Deny from all # Allow from 127.0.0.1 AuthName Nagios Access AuthType Basic AuthUserFile /etc/nagios/htpasswd.users Require valid-user /Directory On Sun, Apr 26, 2009 at 10:52 AM, Jimmyboy jimmyjose2...@gmail.com wrote: Hi Ankush, This is already done, but still the issue exists. The only difference is the username nagiosadmin as in my case. Thanks, Jim On Fri, Apr 24, 2009 at 4:11 PM, ankush grover grover1...@gmail.comwrote: Hi Jimmy, You need to enable authentication in cgi.cfg. use_authentication=1 authorized_for_all_host_commands=admin authorized_for_all_hosts=admin authorized_for_all_service_commands=admin authorized_for_all_services=admin authorized_for_configuration_information=admin authorized_for_system_commands=admin authorized_for_system_information=admin Something like this in nagios.conf file for apache (On my linux box that is centos 5.x it is /etc/httpd/conf.d/nagios.conf) Directory /usr/lib/nagios/cgi # SSLRequireSSL Options ExecCGI AllowOverride None Order allow,deny Allow from all # Order deny,allow # Deny from all # Allow from 127.0.0.1 AuthName Nagios Access AuthType Basic AuthUserFile /etc/nagios/htpasswd.users Require valid-user /Directory Alias /nagios /usr/share/nagios Directory /usr/share/nagios # SSLRequireSSL Options None AllowOverride None Order allow,deny Allow from all # Order deny,allow # Deny from all # Allow from 127.0.0.1 AuthName Nagios Access AuthType Basic AuthUserFile /etc/nagios/htpasswd.users Require valid-user /Directory Now use htpasswd command to generate htpasswd.users file with user admin. htpasswd -c /etc/nagios/htpasswd.users admin Regards Ankush On Fri, Apr 24, 2009 at 3:34 PM, Jimmyboy jimmyjose2...@gmail.com wrote: Hi All, I have installed Apache2.2.9 using the source file 'Apache2_2.2.9.orig.tar.gz'. Nagios 3.0.6 is also installed on Ubuntu Intrepid OS using the Quickstart Guide. I am able to open http://localhost/nagios. However, certain entities on the left pane, such as 'Process Info', 'Network Outages', etc are not getting opened. They error out with the following message. It appears as though you do not have permission to view information for any of the hosts you requested... If you believe this is an error, check the HTTP server authentication requirements for accessing this CGI and check the authorization options in your CGI configuration file. I followed http://www.onlamp.com/pub/a/onlamp/2002/09/26/nagios.html?page=3. Configuration of httpd.conf says ScriptAlias /nagios/cgi-bin/ /usr/local/nagios/sbin/. But, I do not have a directory 'cgi-bin' under nagios directory. Morever, I do not see the 'sites-available' other directories named similarly under my /usr/local/apache2/conf directory. Will that be a problem? But, still, I am at same stage. Anyone, any idea, how to go about? Thanks, Jim -- Crystal Reports #45; New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty#45;free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Crystal Reports #45; New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty#45;free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Crystal Reports #45; New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty#45;free distribution of the report engine for externally facing server and web deployment.
[Nagios-users] Power monitoring for PDU
All, we are trying to monitor PDUs for a green data center. Can someone lists what should I be monitoring for PDUs. Thanks -- Cordially, Shadhin Rahman -- Crystal Reports #45; New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty#45;free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] check_snmp output
All, I want to show the result of check_snmp in a certain way. For example if I am doing a nominal current check on Liebert ups, the snmp query will return 506 as result. However this actauly means 50.6 amp. Is there any way to control the output on check_snmp plugin. I am aware of the -u option but I am not sure if I can use this to achieve the desired result I am looking for. Thanks -- Cordially, Shadhin Rahman -- Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] New to Nagios -- simple problem with data from nrpe
Brian, First thing to check is version of NRPE? NRPE comes with two version, stripped and non-stripped. Make sure both machine has the same version running. If not, then play with the -n option to fix the incompatibility issues. Then check if your nrpe.cfg where you define the actual checks are the same on both nagios server and the monitored machine. I hope this helps. On Fri, Apr 17, 2009 at 12:54 PM, Marc Ismael marcism...@gmail.com wrote: On Fri, Apr 17, 2009 at 11:39 PM, Brian O'Mahony brian.omah...@curamsoftware.com wrote: There seems to be a lot of documentation on Nagios all over the web. I must say im impressed with it, even though im still installing it. Basically I have the server set up and monitoring itself, and I have one remote machine, which I have set up 6 tests on just for testing. I have the nagios plugins and nrpe installed and everything is working in that regard. If I run the check_nrpe command with any of the base remote commands in the /etc/nagios/nrpe.cfg file, I get the output to my screen. [nag...@mido ~]$ /usr/lib/nagios/plugins/check_nrpe -H 172.16.165.248 -c check_root_disk DISK OK - free space: / 4460 MB (95% inode=98%);| /=208MB;4898;4908;0;4918 (IP is the remote machine) However when these tests are added to server.cfg files, I get Status==UNKNOWN and Status Information=(No output returned from plugin) I reckon its something simple that ive missed, but ive gotten a bit lost looking for it. Server: Rhel5.1 Nagios-3.0.6 installed from source Plugins 1.4.13-4 from rpm Plugins-nrpe 2.12-6 from rpm Remote Server: Rhel4u6 nagios-nrpe-2.5.2-1 nagios-plugins-nrpe-2.12-6 nagios-plugins-1.4.13-1.el4 Thanks B i would do the following - make sure that nrpe on the nagios server is connecting to the correct port at the nrpe server by comparing nrpe config files. (check encryption, port, privs, etc). - make sure that nrpe service on the clients are actually running and listening on the configured port. - check service and command definitions Also I would double check the nrpe pdf documentation -- there are examples there to get you up and running with nrpe. -- Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Audio Alert
Edurado, Try to use event handler to call the acutal *.wav file. On Fri, Apr 17, 2009 at 1:19 PM, Eduardo Barreto lec...@gmail.com wrote: How to set audio alert for some host not for all? Is there a way to do it? Cheers Eduardo -- Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Antwort: Re: Antwort: Problem with MySql log
I have master master replication setup for ndo. I ran into big log file issue. I found this php script for log rotation and modified few things to work on my setup. This works fine for me. I hope this helps. http://forums.mysql.com/read.php?52,210712. On Fri, Apr 17, 2009 at 8:36 AM, sascha.runsc...@gfkl.com wrote: Sidenote: please stop top-posting, it's confusing and just spams my account with unneeded quotes. Thank you. Uhm, disable mysql binlogging? you think that this solution helpful? and I would not need this log? I don't know if you would need those binlogs, that's up to you and your setup. If you don't know what you usually do with binlogs, you probably don't need them... S GFKL Financial Services AG Vorstand: Dr. Peter Jänsch (Vors.), Jürgen Baltes, Dr. Tom Haverkamp Vorsitzender des Aufsichtsrats: Dr. Georg F. Thoma Sitz: Limbecker Platz 1, 45127 Essen, Amtsgericht Essen, HRB 13522 -- Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Cordially, Shadhin Rahman -- Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] serious performance issue
/nagios/ndomod.cfg log_rotation_method=m log_archive_path=/var/log/nagios/archives use_syslog=1 log_notifications=1 log_service_retries=1 log_host_retries=1 log_event_handlers=1 log_initial_states=0 log_external_commands=1 log_passive_checks=1 service_inter_check_delay_method=s max_service_check_spread=30 service_interleave_factor=s host_inter_check_delay_method=s max_host_check_spread=30 max_concurrent_checks=0 check_result_reaper_frequency=10 max_check_result_reaper_time=20 check_result_path=/var/log/nagios/spool/checkresults max_check_result_file_age=3600 cached_host_check_horizon=15 cached_service_check_horizon=15 enable_predictive_host_dependency_checks=1 enable_predictive_service_dependency_checks=1 soft_state_dependencies=0 auto_reschedule_checks=0 auto_rescheduling_interval=30 auto_rescheduling_window=180 sleep_time=0.25 service_check_timeout=60 host_check_timeout=30 event_handler_timeout=30 notification_timeout=60 ocsp_timeout=5 perfdata_timeout=5 retain_state_information=1 state_retention_file=var/log/nagios/retention.dat retention_update_interval=60 use_retained_program_state=1 use_retained_scheduling_info=1 retained_host_attribute_mask=0 retained_service_attribute_mask=0 retained_process_host_attribute_mask=0 retained_process_service_attribute_mask=0 retained_contact_host_attribute_mask=0 retained_contact_service_attribute_mask=0 interval_length=60 use_aggressive_host_checking=0 execute_service_checks=1 accept_passive_service_checks=1 execute_host_checks=1 accept_passive_host_checks=1 enable_notifications=1 enable_event_handlers=1 process_performance_data=0 translate_passive_host_checks=0 passive_host_checks_are_soft=0 check_for_orphaned_services=1 check_for_orphaned_hosts=1 check_service_freshness=1 service_freshness_check_interval=60 check_host_freshness=0 host_freshness_check_interval=60 additional_freshness_latency=15 enable_flap_detection=1 low_service_flap_threshold=5.0 high_service_flap_threshold=20.0 low_host_flap_threshold=5.0 high_host_flap_threshold=20.0 date_format=us enable_embedded_perl=0 use_embedded_perl_implicitly=0 illegal_object_name_chars=`~!$%^*|'?,()= illegal_macro_output_chars=`~$|' use_regexp_matching=0 use_true_regexp_matching=0 admin_email=sr2...@columbia.edu daemon_dumps_core=0 use_large_installation_tweaks=1 enable_environment_macros=1 debug_level=-1 debug_verbosity=2 debug_file=/var/log/nagios/nagios.debug max_debug_file_size=100 On Wed, Apr 8, 2009 at 1:56 AM, fancyrabbit fancyrab...@gmail.com wrote: i met almost the same issue. after tweaking enable_embedded_perl=0, the load average was brought up but latencies became lower. On Wed, Apr 8, 2009 at 11:54 AM, shadih rahman shadhi...@gmail.comwrote: I am seeing a ton of orphaned error message for both services and hosts. I am running nagios on a quad core 2.2 GHZ machine running 4 GHZ memory. I will paste my configuration file below. I have the machine sending ndo to a local database sitting on a 170 GB Hard drive. nagios is obcessing on both host and services and sending data to a machine with identical configuration. I am doing failover using NSCA. Please advise on this. nagios.cfg log_file=/var/log/nagios/nagios.log cfg_file=/etc/nagios/commands.cfg cfg_file=/etc/nagios/contacts.cfg cfg_file=/etc/nagios/timeperiods.cfg cfg_file=/etc/nagios/templates.cfg cfg_dir=/etc/nagios/hosts cfg_dir=/etc/nagios/services object_cache_file=/var/log/nagios/objects.cache precached_object_file=/var/log/nagios/objects.precache resource_file=/etc/nagios/resource.cfg status_file=/var/log/nagios/status.dat status_update_interval=60 nagios_user=nagios nagios_group=nagios check_external_commands=1 command_check_interval=-1 command_file=/var/log/nagios/rw/nagios.cmd external_command_buffer_slots=8192 lock_file=/var/log/nagios/nagios.lock temp_file=/var/log/nagios/nagios.tmp temp_path=/tmp event_broker_options=8 broker_module=/usr/lib64/nagios/ndomod.o config_file=/etc/nagios/ndomod.cfg log_rotation_method=m log_archive_path=/var/log/nagios/archives use_syslog=1 log_notifications=1 log_service_retries=1 log_host_retries=1 log_event_handlers=1 log_initial_states=0 log_external_commands=1 log_passive_checks=1 service_inter_check_delay_method=n max_service_check_spread=30 service_interleave_factor=s host_inter_check_delay_method=s max_host_check_spread=30 max_concurrent_checks=0 check_result_reaper_frequency=2 max_check_result_reaper_time=10 check_result_path=/var/log/nagios/spool/checkresults max_check_result_file_age=3600 cached_host_check_horizon=15 cached_service_check_horizon=15 enable_predictive_host_dependency_checks=1 enable_predictive_service_dependency_checks=1 soft_state_dependencies=1 auto_reschedule_checks=1 auto_rescheduling_interval=30 auto_rescheduling_window=180 sleep_time=0.25 service_check_timeout=30 host_check_timeout=20 event_handler_timeout=30 notification_timeout=60 ocsp_timeout=5 perfdata_timeout=5 retain_state_information=1
[Nagios-users] serious performance issue
I am seeing a ton of orphaned error message for both services and hosts. I am running nagios on a quad core 2.2 GHZ machine running 4 GHZ memory. I will paste my configuration file below. I have the machine sending ndo to a local database sitting on a 170 GB Hard drive. nagios is obcessing on both host and services and sending data to a machine with identical configuration. I am doing failover using NSCA. Please advise on this. nagios.cfg log_file=/var/log/nagios/nagios.log cfg_file=/etc/nagios/commands.cfg cfg_file=/etc/nagios/contacts.cfg cfg_file=/etc/nagios/timeperiods.cfg cfg_file=/etc/nagios/templates.cfg cfg_dir=/etc/nagios/hosts cfg_dir=/etc/nagios/services object_cache_file=/var/log/nagios/objects.cache precached_object_file=/var/log/nagios/objects.precache resource_file=/etc/nagios/resource.cfg status_file=/var/log/nagios/status.dat status_update_interval=60 nagios_user=nagios nagios_group=nagios check_external_commands=1 command_check_interval=-1 command_file=/var/log/nagios/rw/nagios.cmd external_command_buffer_slots=8192 lock_file=/var/log/nagios/nagios.lock temp_file=/var/log/nagios/nagios.tmp temp_path=/tmp event_broker_options=8 broker_module=/usr/lib64/nagios/ndomod.o config_file=/etc/nagios/ndomod.cfg log_rotation_method=m log_archive_path=/var/log/nagios/archives use_syslog=1 log_notifications=1 log_service_retries=1 log_host_retries=1 log_event_handlers=1 log_initial_states=0 log_external_commands=1 log_passive_checks=1 service_inter_check_delay_method=n max_service_check_spread=30 service_interleave_factor=s host_inter_check_delay_method=s max_host_check_spread=30 max_concurrent_checks=0 check_result_reaper_frequency=2 max_check_result_reaper_time=10 check_result_path=/var/log/nagios/spool/checkresults max_check_result_file_age=3600 cached_host_check_horizon=15 cached_service_check_horizon=15 enable_predictive_host_dependency_checks=1 enable_predictive_service_dependency_checks=1 soft_state_dependencies=1 auto_reschedule_checks=1 auto_rescheduling_interval=30 auto_rescheduling_window=180 sleep_time=0.25 service_check_timeout=30 host_check_timeout=20 event_handler_timeout=30 notification_timeout=60 ocsp_timeout=5 perfdata_timeout=5 retain_state_information=1 state_retention_file=var/log/nagios/retention.dat retention_update_interval=60 use_retained_program_state=1 use_retained_scheduling_info=1 retained_host_attribute_mask=0 retained_service_attribute_mask=0 retained_process_host_attribute_mask=0 retained_process_service_attribute_mask=0 retained_contact_host_attribute_mask=0 retained_contact_service_attribute_mask=0 interval_length=60 use_aggressive_host_checking=0 execute_service_checks=1 accept_passive_service_checks=1 execute_host_checks=1 accept_passive_host_checks=1 enable_notifications=1 enable_event_handlers=1 process_performance_data=0 obsess_over_services=1 ocsp_command=send_service_check ochp_command=send_host_check obsess_over_hosts=1 translate_passive_host_checks=0 passive_host_checks_are_soft=0 check_for_orphaned_services=1 check_for_orphaned_hosts=1 check_service_freshness=1 service_freshness_check_interval=60 check_host_freshness=0 host_freshness_check_interval=60 additional_freshness_latency=15 enable_flap_detection=1 low_service_flap_threshold=5.0 high_service_flap_threshold=20.0 low_host_flap_threshold=5.0 high_host_flap_threshold=20.0 date_format=us enable_embedded_perl=1 use_embedded_perl_implicitly=1 illegal_object_name_chars=`~!$%^*|'?,()= illegal_macro_output_chars=`~$|' use_regexp_matching=0 use_true_regexp_matching=0 admin_email=sr2...@columbia.edu daemon_dumps_core=0 use_large_installation_tweaks=1 enable_environment_macros=1 debug_level=-1debug_verbosity=2 debug_file=/var/log/nagios/nagios.debug max_debug_file_size=100 my nagiostats output [sr2690nagiostats Nagios Stats 3.0.6 Copyright (c) 2003-2008 Ethan Galstad (www.nagios.org) Last Modified: 12-01-2008 License: GPL CURRENT STATUS DATA -- Status File:/var/log/nagios/status.dat Status File Age:0d 0h 0m 19s Status File Version:3.0.6 Program Running Time: 0d 2h 5m 28s Nagios PID: 12139 Used/High/Total Command Buffers:0 / 0 / 8192 Total Services: 2783 Services Checked: 2783 Services Scheduled: 2782 Services Actively Checked: 2783 Services Passively Checked: 0 Total Service State Change: 0.000 / 52.830 / 0.263 % Active Service Latency: 1.304 / 12092.843 / 1469.130 sec Active Service Execution Time: 0.011 / 15.103 / 0.468 sec Active Service State Change:0.000 / 52.830 / 0.263 % Active Services Last 1/5/15/60 min: 0 / 0 / 0 / 129 Passive Service Latency:0.000 / 0.000 / 0.000 sec Passive Service State Change: 0.000 / 0.000 / 0.000 %
[Nagios-users] check_nrpe help with multipple argument
I am trying to execute a check_nrpe with multiple argument and it is not working. I have the following definition in my nrpe.cfg command[check_users_x64]=/usr/lib64/nagios/plugins/check_users -w 5 -c 10 command[check_load_x64]=/usr/lib64/nagios/plugins/check_load -w 15,10,5 -c 30,25,20 command[check_hda1_x64]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1 command[check_zombie_procs_x64]=/usr/lib64/nagios/plugins/check_procs -w 5 -c 10 -s Z command[check_total_procs_x64]=/usr/lib64/nagios/plugins/check_procs -w 150 -c 200 command[check_disk_x64]=/usr/lib64/nagios/plugins/check_disk -w 15% -c 10% -p $ARG1$ command[check_disk_excluding_x64]=/usr/lib64/nagios/plugins/check_disk -w 15% -c 10% -p $ARG1$ -x $ARG2$ command[check_process_x64]=/usr/lib64/nagios/plugins/check_proc -w $ARG1$ -c $ARG2$ -C $ARG3$ command[restart-remote_x64]=/usr/lib64/nagios/eventhandlers/remote-restart.sh $ARG1$ $ARG2$ $ARG3$ $ARG4$ when I try to execute the following from command line I get an error. -bash-3.2$ ./check_nrpe -H localhost -c check_process_x64 -a 10 10 nagios NRPE: Unable to read output however single argument works fine. -bash-3.2$ ./check_nrpe -H localhost -c check_disk_x64 -a /var DISK OK - free space: /var 6674 MB (72% inode=99%);| /var=2513MB;8234;8719;0;9688 Please advise on this. Thanks -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Dependency and performance question
Hi, I am running nagios on a 2.5 GHZ 4-core 64 bit machine running RHEL5. I am seeing some performance issue in Nagios. I am doing failover setup. I have another similar machine which has identical config but not doing any active checks. My master machine sends check result using NSCA. Now I can not determine why my master machine is lacking in performace. I will paste my performance data below. I also have another question about dependency. 1) if a HOST is down, does the service checks still happens? I would like to setup a dependency where if host is down no service check should take place. How do I go about setting this up. An exapmple will be much appreciated. 2) How can I start troubleshooting my performance issue? Thanks in advance. Nagios Stats 3.0.6 Copyright (c) 2003-2008 Ethan Galstad (www.nagios.org) Last Modified: 12-01-2008 License: GPL CURRENT STATUS DATA -- Status File:/var/log/nagios/status.dat Status File Age:0d 0h 0m 12s Status File Version:3.0.6 Program Running Time: 0d 12h 12m 21s Nagios PID: 9719 Used/High/Total Command Buffers:0 / 1 / 4096 Total Services: 3342 Services Checked: 3342 Services Scheduled: 3342 Services Actively Checked: 3342 Services Passively Checked: 0 Total Service State Change: 0.000 / 43.680 / 0.171 % Active Service Latency: 1574.556 / 1731.304 / 1684.508 sec Active Service Execution Time: 0.069 / 15.094 / 0.519 sec Active Service State Change:0.000 / 43.680 / 0.171 % Active Services Last 1/5/15/60 min: 47 / 389 / 1287 / 3342 Passive Service Latency:0.000 / 0.000 / 0.000 sec Passive Service State Change: 0.000 / 0.000 / 0.000 % Passive Services Last 1/5/15/60 min:0 / 0 / 0 / 0 Services Ok/Warn/Unk/Crit: 2955 / 23 / 351 / 13 Services Flapping: 8 Services In Downtime: 0 Total Hosts:3037 Hosts Checked: 3005 Hosts Scheduled:3030 Hosts Actively Checked: 3037 Host Passively Checked: 0 Total Host State Change:0.000 / 39.210 / 0.146 % Active Host Latency:0.000 / 1729.854 / 1569.654 sec Active Host Execution Time: 0.000 / 30.011 / 1.821 sec Active Host State Change: 0.000 / 39.210 / 0.146 % Active Hosts Last 1/5/15/60 min:50 / 341 / 926 / 2387 Passive Host Latency: 0.000 / 0.000 / 0.000 sec Passive Host State Change: 0.000 / 0.000 / 0.000 % Passive Hosts Last 1/5/15/60 min: 0 / 0 / 0 / 0 Hosts Up/Down/Unreach: 2852 / 185 / 0 Hosts Flapping: 12 Hosts In Downtime: 0 Active Host Checks Last 1/5/15 min: 77 / 376 / 1013 Scheduled: 68 / 346 / 940 On-demand: 9 / 30 / 73 Parallel:69 / 349 / 944 Serial: 0 / 0 / 0 Cached: 7 / 27 / 69 Passive Host Checks Last 1/5/15 min:0 / 0 / 0 Active Service Checks Last 1/5/15 min: 69 / 405 / 1308 Scheduled: 69 / 405 / 1308 On-demand: 0 / 0 / 0 Cached: 0 / 0 / 0 Passive Service Checks Last 1/5/15 min: 0 / 0 / 0 External Commands Last 1/5/15 min: 0 / 0 / 0 -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] orphaned service
I am getting a lot of warnning for orphaned service. I have the following settings in nagios. Can someone help me to get rid off these errors. Thanks 1238508483] Warning: The check of service 'output_current' on host ' ire-460rsd-b-1-ups.net' looks like it was orphaned (results ne ver came back). I'm scheduling an immediate check of the service... egrep 'status_update|reaper|orphan' /etc/nagios/nagios.cfg status_update_interval=60 check_result_reaper_frequency=2 max_check_result_reaper_time=30 check_for_orphaned_services=1 check_for_orphaned_hosts=1 -- Cordially, Shadhin Rahman -- ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] how to do check_command argument with space
can someone please show me how to do check command with space. So one of the argument will have space. Thanks check_command check_https_reverse!/cms/enter.cfm!courseworks!error occurred -- Cordially, Shadhin Rahman -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] event handler question with nrpe
can event handler take argument. I want to have a generic shell script
which take argument as to what process needs to start. I want to restart
process via nrpe. Can someone please verfiy if the following will work or
not? Thanks in advance.
*
define service{
host_name somehost
service_description HTTP
max_check_attempts 4
event_handler restart-process.sh!my_proecess
...other service variables...
}
*
Once the service has been defined with an event handler, we must define that
event handler as a command. Notice the macros in the command line that I am
passing to the event handler - these are important!
define command{
command_namerestart-process.sh
command_line/usr/lib/nagios/plugins/check_nrpe -H $HOSTADDRESS$ -c
restart-process -a $SERVICESTATE$ $STATETYPE$ $SERVICEATTEMPT$
$SERVICEDESC$ 2 $ARG1$
}
my restart-process.sh
#!/bin/sh
maxattempts=$5
case $1 in
OK)
# The service just came back up, so don't do anything...
;;
WARNING)
# We don't really care about warning states, since the service is
probably still running...
;;
UNKNOWN)
# We don't know what might be causing an unknown error, so don't do
anything...
;;
CRITICAL)
case $2 in
SOFT)
case $3 in
$maxattempts)
logger -t nrpe-eventhandler Eventhandler: (Re)starting
/etc/init.d/$4 (state=$1, type=$2, attempt=$3)
output=`sudo /etc/init.d/$4 restart`
`which printf` %b * Nagios *\n\nMessage:\tAn
init script
was invoked (after $3
attempts).\nDate/Time:\t`date`\n\nHostname:\t`uname
-n`\nService:\t$4\nCommand:\t/etc/init.d/$4
restart\nOutput:\n\n$output \
| `which mail` -s ** Eventhandler: Restart of '$4' on
host '`uname
-n`' $notifee
sudo /etc/init.d/$6 restart
;;
esac
;;
HARD)
# Call the init script to restart the service.
sudo /etc/init.d/$6 restart
;;
esac
;;
esac
exit 0
--
Cordially,
Shadhin Rahman
--
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] NRPE installation issue on solaris 9
I am trying to install nagios plugins and nrpe on solaris 9. I am getting the following error. Nagios built with the following options: $ ./configure --prefix=/opt/nrpe-2.12 --enable-command-args --disable-ssl *** Configuration summary for nrpe 2.12 03-10-2008 ***: General Options: - NRPE port:5666 NRPE user:nagios NRPE group: nagios Nagios user: nagios Nagios group: nagios $ make all [...] gcc -g -O2 -DHAVE_CONFIG_H -o nrpe nrpe.c utils.c -lnsl -lsocket ./snprintf.o -liberty nrpe.c: In function ‘get_log_facility’: nrpe.c:617: error: ‘LOG_AUTHPRIV’ undeclared (first use in this function) nrpe.c:617: error: (Each undeclared identifier is reported only once nrpe.c:617: error: for each function it appears in.) nrpe.c:619: error: ‘LOG_FTP’ undeclared (first use in this function) make[1]: *** [nrpe] Error 1 Are there special Solaris patches for nrpe? -- Cordially, Shadhin Rahman -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] NRPE installation issue on solaris 9
I found the solution. Just sharing with rest of the group. http://www.utahsysadmin.com/2008/03/14/configuring-nagios-plugins-nrpe-on-solaris-10/ On Thu, Mar 19, 2009 at 10:12 AM, shadih rahman shadhi...@gmail.com wrote: I am trying to install nagios plugins and nrpe on solaris 9. I am getting the following error. Nagios built with the following options: $ ./configure --prefix=/opt/nrpe-2.12 --enable-command-args --disable-ssl *** Configuration summary for nrpe 2.12 03-10-2008 ***: General Options: - NRPE port:5666 NRPE user:nagios NRPE group: nagios Nagios user: nagios Nagios group: nagios $ make all [...] gcc -g -O2 -DHAVE_CONFIG_H -o nrpe nrpe.c utils.c -lnsl -lsocket ./snprintf.o -liberty nrpe.c: In function ‘get_log_facility’: nrpe.c:617: error: ‘LOG_AUTHPRIV’ undeclared (first use in this function) nrpe.c:617: error: (Each undeclared identifier is reported only once nrpe.c:617: error: for each function it appears in.) nrpe.c:619: error: ‘LOG_FTP’ undeclared (first use in this function) make[1]: *** [nrpe] Error 1 Are there special Solaris patches for nrpe? -- Cordially, Shadhin Rahman -- Cordially, Shadhin Rahman -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
