Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
++ On 30Dec2010, at 12.47, Jared Mauch wrote: On Dec 29, 2010, at 11:24 AM, Josh Smith wrote: While certainly not the best stuff made I've found the ubiquiti equipment to be very nice for the price and have a few of their AP's which have been in service 24x7 for a couple of years now. Same here. The price performance is hard (impossible?) to beat. Combine that with the Linux/SDK stuff and you can do some interesting things with it that you can't do with other devices. - Jared --- 李柯睿 Check my PGP key here: https://www.asgaard.org/~cdl/cdl.asc PGP.sig Description: This is a digitally signed message part
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
Wayne E. Bouchard w...@typo.org writes: Codes are usually defined in one of two ways... Either cannot be above the building parapet or cannot be visible from the street below (which allows you to position a stant at the center of the roof so you can clear the parapet) but when talking to building management, it can very easily be, can't put anything on the roof So to be certain we're not missing an opportunity, do you know that you don't actually have the second of those definitions as an option? In my area, neighboring jurisdictions adopt either the first or the second with building management usually adopting the first and making my life difficult. (IE, can do it in one place but not on the companion building.) The third consideration is someone notices and cares. The Nanostation Loco (again from Ubiquiti) is easily capable of the distances that you're talking about and is an all-in-out unit (antenna plus radio, fed with POE) about twice the size of a pack of cigarettes (does anyone use that as a point of reference anymore or have enough of us quit smoking that it's irrelevant?). It has a built-in mount on the back and is intended to be zip tied to an existing vent pipe or mast. They even include a zip tie in the packaging. As someone else noted, it is cheaper to buy Ubiquiti equipment and see if it works than it is to do the engineering. In this case, it may well be worth the investment to buy the Ubiquiti equipment and bring it to a meeting with the building management folks to do some *social engineering*. Most of these regulations are centered on the concern that your building not look like a tower site. An antenna that is sufficiently small that it can not be seen from the ground without resorting to optics may be on their oh, that's fine list once they see one sitting on the table in front of them. -r
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
On 12/28/2010 11:48 PM, Anonymous List User wrote: For architectural and building management reasons we cannot mount our antennas in a rooftop or outdoor location at either end. The distance between two buildings is 1.5 km, and the fresnel zone is clear. Antennas need to be located indoors at both ends and will be placed on small speaker stand tripod pointing at windows. This has been done successfully before with 2.4 GHz 802.11g equipment and a link from an office in the Westin to a nearby apartment building, but I am unsure of what effect glass will have on 5 GHz. Has anyone tried this? Low-E glass is brutal on radio waves. If the windows are tinted, multi-layer, or have metalic particles success may be difficult. You may want to test with some 802.11a network cards in ad-hoc mode to see if you can actually communicate over the 1500m path. We have had to deal with a condo association to get approval to mount some panels outside at one site. It can usually be discussed when presented with the facts and some photo-shop edits to show what visual impact it will have. However, be prepared for a significant delay in some cases and success is never a sure thing. Another item of concern is you are looking at IC/FCC unlicensed bands. Ten years ago 5.8 was fairly clean, but more recently we have found a lot more consumer devices invading the spectrum. We had a 1km path with a $15K microwave system knocked out by a consumer $50 cordless phone that was 1/2 block away. (We purchased a DECT6 phone for them and 'solved' the immediate issue... until we could obtain a license/path and the equipment to install something that wouldn't be interfered with.) -- Shane Allan Godmere Senior Telecommunications Engineer II Michigan Technological University 1400 Townsend Dr. EERC-B31 Houghton, MI 49931
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
On 12/29/2010 8:19 AM, Robert E. Seastrom wrote: The third consideration is someone notices and cares. The Nanostation Loco (again from Ubiquiti) is easily capable of the distances that you're talking about and is an all-in-out unit (antenna plus radio, fed with POE) about twice the size of a pack of cigarettes (does anyone use that as a point of reference anymore or have enough of us quit smoking that it's irrelevant?). Deck of cards, maybe? --Curtis
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
+1 on Alvarion. - Reply message - From: Bryan Fields br...@bryanfields.net Date: Wed, Dec 29, 2010 9:30 am Subject: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance To: nanog@nanog.org On 12/29/2010 08:19, Robert E. Seastrom wrote: Most of these regulations are centered on the concern that your building not look like a tower site. An antenna that is sufficiently small that it can not be seen from the ground without resorting to optics may be on their oh, that's fine list once they see one sitting on the table in front of them. Don't forget about OTARD, where so long as you control the space in your lease, no local government regulations can prevent installation of a internet reception radio. Also, the Ubiquiti is crap from a build/reliability standpoint. If you're doing anything serious, it would be worth it to buy a better product. I'm partial to the Alvarion and Motorola PtP links. -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
On Wed, Dec 29, 2010 at 10:30 AM, Bryan Fields br...@bryanfields.net wrote: On 12/29/2010 08:19, Robert E. Seastrom wrote: Most of these regulations are centered on the concern that your building not look like a tower site. An antenna that is sufficiently small that it can not be seen from the ground without resorting to optics may be on their oh, that's fine list once they see one sitting on the table in front of them. Don't forget about OTARD, where so long as you control the space in your lease, no local government regulations can prevent installation of a internet reception radio. Also, the Ubiquiti is crap from a build/reliability standpoint. If you're doing anything serious, it would be worth it to buy a better product. I'm partial to the Alvarion and Motorola PtP links. -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net While certainly not the best stuff made I've found the ubiquiti equipment to be very nice for the price and have a few of their AP's which have been in service 24x7 for a couple of years now. Thanks, -- Josh Smith KD8HRX email/jabber: juice...@gmail.com phone: 304.237.9369(c)
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
On Dec 29, 2010, at 11:24 AM, Josh Smith wrote: While certainly not the best stuff made I've found the ubiquiti equipment to be very nice for the price and have a few of their AP's which have been in service 24x7 for a couple of years now. Same here. The price performance is hard (impossible?) to beat. Combine that with the Linux/SDK stuff and you can do some interesting things with it that you can't do with other devices. - Jared
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
On 12/29/2010 5:47 PM, Jared Mauch wrote: On Dec 29, 2010, at 11:24 AM, Josh Smith wrote: While certainly not the best stuff made I've found the ubiquiti equipment to be very nice for the price and have a few of their AP's which have been in service 24x7 for a couple of years now. Same here. The price performance is hard (impossible?) to beat. Combine that with the Linux/SDK stuff and you can do some interesting things with it that you can't do with other devices. - Jared With prices so low, you can even afford redundant links :-)
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
snip Combine that with the Linux/SDK stuff and you can do some interesting things with it that you can't do with other devices. - Jared Jared, I don't really have any experience with the Linux/SDK stuff care to share what you're using it for? Thanks, -- Josh Smith KD8HRX email/jabber: juice...@gmail.com phone: 304.237.9369(c)
5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
For architectural and building management reasons we cannot mount our antennas in a rooftop or outdoor location at either end. The distance between two buildings is 1.5 km, and the fresnel zone is clear. Antennas need to be located indoors at both ends and will be placed on small speaker stand tripod pointing at windows. This has been done successfully before with 2.4 GHz 802.11g equipment and a link from an office in the Westin to a nearby apartment building, but I am unsure of what effect glass will have on 5 GHz. Has anyone tried this? The goal of this link is to achieve a 10 Mbps+ full duple bridge to a building which is only serviced by ADSL2+ Telus service in a Western Canadian city. Telus' upstream speed offering do not exceed 1 Mbps. Equipment. These have been used successfully for MCS13/MCS14 50 Mbps+ bridges at 11 km distance between towers. http://ubnt.com/nanobridge http://www.ubnt.com/downloads/nb5_datasheet.pdf
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
On Tue, 28 Dec 2010, Anonymous List User wrote: For architectural and building management reasons we cannot mount our antennas in a rooftop or outdoor location at either end. The distance between two buildings is 1.5 km, and the fresnel zone is clear. Antennas need to be located indoors at both ends and will be placed on small speaker stand tripod pointing at windows. This has been done successfully before with 2.4 GHz 802.11g equipment and a link from an office in the Westin to a nearby apartment building, but I am unsure of what effect glass will have on 5 GHz. Has anyone tried this? A lot depends on the windows themselves. Windows in some modern buildings have a thin metallic coating that can have a big impact on the ability to pass an RF signal. jms
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
Anonymous List User wrote: For architectural and building management reasons we cannot mount our antennas in a rooftop or outdoor location at either end. The distance between two buildings is 1.5 km, and the fresnel zone is clear. Antennas need to be located indoors at both ends and will be placed on small speaker stand tripod pointing at windows. This has been done successfully before with 2.4 GHz 802.11g equipment and a link from an office in the Westin to a nearby apartment building, but I am unsure of what effect glass will have on 5 GHz. Has anyone tried this? The goal of this link is to achieve a 10 Mbps+ full duple bridge to a building which is only serviced by ADSL2+ Telus service in a Western Canadian city. Telus' upstream speed offering do not exceed 1 Mbps. Equipment. These have been used successfully for MCS13/MCS14 50 Mbps+ bridges at 11 km distance between towers. http://ubnt.com/nanobridge http://www.ubnt.com/downloads/nb5_datasheet.pdf Imo, Ubiquiti stuff is so cheap ($95 for the 25dBi version), it's probably more cost effective to just buy it and try it rather than spending the time analyzing the glass (on both ends).
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
On 12/28/10 8:48 PM, Anonymous List User wrote: For architectural and building management reasons we cannot mount our antennas in a rooftop or outdoor location at either end. The distance between two buildings is 1.5 km, and the fresnel zone is clear. Antennas need to be located indoors at both ends and will be placed on small speaker stand tripod pointing at windows. This has been done successfully before with 2.4 GHz 802.11g equipment and a link from an office in the Westin to a nearby apartment building, but I am unsure of what effect glass will have on 5 GHz. Has anyone tried this? glazed windows (which is tin in general) are a problem... when most of your radiation as being thrown right back at you that is a challange. The goal of this link is to achieve a 10 Mbps+ full duple bridge to a building which is only serviced by ADSL2+ Telus service in a Western Canadian city. Telus' upstream speed offering do not exceed 1 Mbps. Equipment. These have been used successfully for MCS13/MCS14 50 Mbps+ bridges at 11 km distance between towers. http://ubnt.com/nanobridge http://www.ubnt.com/downloads/nb5_datasheet.pdf
Re: 5.7/5.8 GHz 802.11n dual polarity MIMO through office building glass, 1.5 km distance
Codes are usually defined in one of two ways... Either cannot be above the building parapet or cannot be visible from the street below (which allows you to position a stant at the center of the roof so you can clear the parapet) but when talking to building management, it can very easily be, can't put anything on the roof So to be certain we're not missing an opportunity, do you know that you don't actually have the second of those definitions as an option? In my area, neighboring jurisdictions adopt either the first or the second with building management usually adopting the first and making my life difficult. (IE, can do it in one place but not on the companion building.) On Tue, Dec 28, 2010 at 09:51:48PM -0800, Joel Jaeggli wrote: On 12/28/10 8:48 PM, Anonymous List User wrote: For architectural and building management reasons we cannot mount our antennas in a rooftop or outdoor location at either end. The distance between two buildings is 1.5 km, and the fresnel zone is clear. Antennas need to be located indoors at both ends and will be placed on small speaker stand tripod pointing at windows. This has been done successfully before with 2.4 GHz 802.11g equipment and a link from an office in the Westin to a nearby apartment building, but I am unsure of what effect glass will have on 5 GHz. Has anyone tried this? glazed windows (which is tin in general) are a problem... when most of your radiation as being thrown right back at you that is a challange. The goal of this link is to achieve a 10 Mbps+ full duple bridge to a building which is only serviced by ADSL2+ Telus service in a Western Canadian city. Telus' upstream speed offering do not exceed 1 Mbps. Equipment. These have been used successfully for MCS13/MCS14 50 Mbps+ bridges at 11 km distance between towers. http://ubnt.com/nanobridge http://www.ubnt.com/downloads/nb5_datasheet.pdf --- Wayne Bouchard w...@typo.org Network Dude http://www.typo.org/~web/
