Re: AS and advertisen questions
Hi all Thank you so much for your help I am not using cisco. From my understanding from your mail, I should configure bgp as the following. Right? What do I should pay attention also? Seattle: network 66.49.130.0/24 announce out permit: 66.49.130.0/24 announce out deny 0.0.0.0 deny in 66.49.130.0/24 permit in any New York: network 67.55.129.0/24 and ipv6 network. announce out permit 67.55.129.0/24 and ipv6 network. announce out deny 0.0.0.0 deny in 67.55.129.0/24 and ipv6 network permit in any Thank you again On Sat, Jun 25, 2011 at 10:11 PM, David Swafford da...@davidswafford.com wrote: Yep, we do it that way. We basically treat each of our datacenter's as their own entity, using separate space for each, but all with the same AS #. What Joel mentioned is going to be the major catch, in that for each of the two disconnected AS's to accept the opposite sites routes, you'd need to relax BGP's loop prevention check (which looks for it's own AS # within the AS Path of incoming routes). If your on Cisco gear, you'd need to add an additional command under the BGP neighbor configuration that says allowas-in. Here's a breif doc from Cisco on configuring this http://www.cisco.com/image/gif/paws/112236/allowas-in-bgp-config-example.pdf David. On Sat, Jun 25, 2011 at 9:39 PM, Joel Jaeggli joe...@bogus.com wrote: On Jun 25, 2011, at 6:03 PM, Deric Kwok wrote: Hi Can we use same AS to advertise different networks in different location? We would like to use Seattle as production network and New York as testing eg: Seattle: network 66.49.130.0/24 New York: network 67.55.129.0/24 and ipv6 network. Thank you Assuming you want the two instances to be able talk to each other you just have to relax loop detection so that you will accept prefixes from your AS...
Re: AS and advertisen questions
On Sat, Jun 25, 2011 at 9:39 PM, Joel Jaeggli joe...@bogus.com wrote: On Jun 25, 2011, at 6:03 PM, Deric Kwok wrote: Can we use same AS to advertise different networks in different location? Assuming you want the two instances to be able talk to each other you just have to relax loop detection so that you will accept prefixes from your AS... You can also have each AS carry default toward the cloud between. Of course, that approach might not be appropriate for all circumstances. Tony
AS and advertisen questions
Hi Can we use same AS to advertise different networks in different location? We would like to use Seattle as production network and New York as testing eg: Seattle: network 66.49.130.0/24 New York: network 67.55.129.0/24 and ipv6 network. Thank you
Re: AS and advertisen questions
On Jun 25, 2011 6:04 PM, Deric Kwok deric.kwok2...@gmail.com wrote: Hi Can we use same AS to advertise different networks in different location? We would like to use Seattle as production network and New York as testing eg: Seattle: network 66.49.130.0/24 New York: network 67.55.129.0/24 and ipv6 network. Thank you Yes
Re: AS and advertisen questions
On Jun 25, 2011, at 6:03 PM, Deric Kwok wrote: Hi Can we use same AS to advertise different networks in different location? We would like to use Seattle as production network and New York as testing eg: Seattle: network 66.49.130.0/24 New York: network 67.55.129.0/24 and ipv6 network. Thank you Assuming you want the two instances to be able talk to each other you just have to relax loop detection so that you will accept prefixes from your AS...
Re: AS and advertisen questions
Yep, we do it that way. We basically treat each of our datacenter's as their own entity, using separate space for each, but all with the same AS #. What Joel mentioned is going to be the major catch, in that for each of the two disconnected AS's to accept the opposite sites routes, you'd need to relax BGP's loop prevention check (which looks for it's own AS # within the AS Path of incoming routes). If your on Cisco gear, you'd need to add an additional command under the BGP neighbor configuration that says allowas-in. Here's a breif doc from Cisco on configuring this http://www.cisco.com/image/gif/paws/112236/allowas-in-bgp-config-example.pdf David. On Sat, Jun 25, 2011 at 9:39 PM, Joel Jaeggli joe...@bogus.com wrote: On Jun 25, 2011, at 6:03 PM, Deric Kwok wrote: Hi Can we use same AS to advertise different networks in different location? We would like to use Seattle as production network and New York as testing eg: Seattle: network 66.49.130.0/24 New York: network 67.55.129.0/24 and ipv6 network. Thank you Assuming you want the two instances to be able talk to each other you just have to relax loop detection so that you will accept prefixes from your AS...
Re: AS and advertisen questions
Can we use same AS to advertise different networks in different location? We would like to use Seattle as production network and New York as testing eg: Seattle: network 66.49.130.0/24 New York: network 67.55.129.0/24 and ipv6 network. you have not made clear whether ny and sea are connected internally. if not, see joel's caveat. some folk with whom you may want to peer may demand that you announce the same nlri to them at all peering points. randy
