Re: flow generating tool
you might also try D-ITG http://www.grid.unina.it/software/ITG/index.php james
Re: flow generating tool
If a software based solution is OK, check out IxChariot, endpoints can be Windows, Linux, OS X, and Solaris. Used it years ago and was happy with it. http://www.ixchariot.com/ Sent from my iPhone On Sep 26, 2011, at 6:07, Naiden Dimitrov naiden.dimit...@maxtelecom.bg wrote: Hello, I need a tool that generates traffic flows from different source IP addresses for network tests. Regards, Naiden Dimitrov Mobile: +359 885 906 155 naiden.dimit...@maxtelecom.bgmailto:naiden.dimit...@maxtelecom.bg www.maxtelecom.bghttp://www.maxtelecom.bg
Re: flow generating tool
Iperf is a good start http://iperf.sourceforge.net/ Would be interested in any other tools as well. -- Regards, Jason Leschnik. [m] 0432 35 4224 [w@] jason dot leschnik at ansto dot gov dot aujason.lesch...@ansto.gov.au [U@] jml...@uow.edu.au
Re: flow generating tool
On Mon, 26 Sep 2011 14:49:50 +0300, Naiden Dimitrov naiden.dimit...@maxtelecom.bg said: nd Thank you for the response, but this is a tool that examines nd data flows. Sorry I missed your context. YAF will generate flows (which is what I thought you were asking) as it sees packets stream by, but it sounds like you want something that puts traffic on the wire. An old standby is: http://tcpreplay.synfin.net/ and of course there are commercial options. Not sure how up to date this is, but there are quite a few options listed here: http://www.protocoltesting.com/trgen.html ---George Jones
RE: flow generating tool
Perhaps not a tool as in software, but clearly something that you might want to have a look at : Ixia and Spirent devices ... Those are mostly used for applications like generating different kind of traffic. Erik Bais
Re: flow generating tool
Iperf(linux) and jperf(windows) does generate traffic flows. You simply set up sender/receiver and it'll generate traffic load. It can generate 10gig line rate unicast flows but multicast replication is limited because it is software based. Iperf/jperf however, is not as flexible or anywhere as feature rich and powerful as some of the other hardware solutions as mentioned earlier - ex: ixia, spirent etc. -Jia --Original Message-- From: Erik Bais To: 'Naiden Dimitrov' To: 'George Jones' Cc: nanog@nanog.org Subject: RE: flow generating tool Sent: Sep 26, 2011 9:03 AM Perhaps not a tool as in software, but clearly something that you might want to have a look at : Ixia and Spirent devices ... Those are mostly used for applications like generating different kind of traffic. Erik Bais
Re: flow generating tool
Does anyone follow a network performance testing methodology, using hardware from companies like ixia/spirent? I know that basic testing is typically done for validation of configs, but i assume other issues would make themselves apparent when pushed to these higher loads. thoughts/comments? Thanks -- Regards, Jason Leschnik. [m] 0432 35 4224 [w@] jason dot leschnik at ansto dot gov dot aujason.lesch...@ansto.gov.au [U@] jml...@uow.edu.au
Re: flow generating tool
On Mon, 26 Sep 2011 10:02:11 -0400, Jason Leschnik lesch...@gmail.com said: jl Does anyone follow a network performance testing methodology, jl using hardware from companies like ixia/spirent? Probably more/more formal than you want, but: http://www.ietf.org/dyn/wg/charter/bmwg-charter And I think you may find that some of the vendor folks are active in the WG. ---George Jones
Re: flow generating tool
On Sep 26, 2011, at 4:02 PM, Jason Leschnik wrote: Does anyone follow a network performance testing methodology, using hardware from companies like ixia/spirent? I know that basic testing is typically done for validation of configs, but i assume other issues would make themselves apparent when pushed to these higher loads. thoughts/comments? Thanks It really depends on the product you are testing. If forwarding performance is what you want to measure, you would do it with various routing table sizes (starting small and ending with a global table). Packet size is also something you should look at. We could provide better suggestions if you tell us what your product is. Vlad Galu g...@packetdam.com
RE: flow generating tool
We have quite a number of companies using hardware from companies like Ixia and Spirent - the key is to use tools that makes it easy to setup a testing methodology without hiring a support staff. You can contact me directly for more information and how others like Cisco, AtT, Vodafone and many more are doing this sort of testing. Regards, Chuck creyno...@tsieda.com -Original Message- From: Vlad Galu [mailto:g...@packetdam.com] Sent: Monday, September 26, 2011 10:31 AM To: Jason Leschnik Cc: George Jones; nanog@nanog.org; Naiden Dimitrov Subject: Re: flow generating tool On Sep 26, 2011, at 4:02 PM, Jason Leschnik wrote: Does anyone follow a network performance testing methodology, using hardware from companies like ixia/spirent? I know that basic testing is typically done for validation of configs, but i assume other issues would make themselves apparent when pushed to these higher loads. thoughts/comments? Thanks It really depends on the product you are testing. If forwarding performance is what you want to measure, you would do it with various routing table sizes (starting small and ending with a global table). Packet size is also something you should look at. We could provide better suggestions if you tell us what your product is. Vlad Galu g...@packetdam.com
Re: flow generating tool
Another commercial tool (for large-scale application re-creation) is the Mu Studio Performance Suite from Mu Dynamics: http://www.mudynamics.com/resources/collaterals_noreg/Mu_Studio_Performance_Suite.pdf ~tom On Mon, Sep 26, 2011 at 06:03, Erik Bais eb...@a2b-internet.com wrote: Perhaps not a tool as in software, but clearly something that you might want to have a look at : Ixia and Spirent devices ... Those are mostly used for applications like generating different kind of traffic. Erik Bais
RE: flow generating tool
The venerable mgen (http://cs.itd.nrl.navy.mil/work/mgen/) is another good option, provided you don't want lots of bandwidth. It has some flexibility in scripting the flows it creates. Jonathon -Original Message- From: Jason Leschnik [mailto:lesch...@gmail.com] Sent: Monday, 26 September 2011 11:21 p.m. To: Naiden Dimitrov Cc: nanog@nanog.org Subject: Re: flow generating tool Iperf is a good start http://iperf.sourceforge.net/ Would be interested in any other tools as well. -- Regards, Jason Leschnik. [m] 0432 35 4224 [w@] jason dot leschnik at ansto dot gov dot aujason.lesch...@ansto.gov.au [U@] jml...@uow.edu.au This email and attachments: are confidential; may be protected by privilege and copyright; if received in error may not be used, copied, or kept; are not guaranteed to be virus-free; may not express the views of Kordia(R); do not designate an information system; and do not give rise to any liability for Kordia(R).
Re: flow generating tool
If you are looking to automate any of your testing, +1 Ixia if the box is using the Agilent OS/Interface (I forget how they are marketing it now). In regards to automation, I recently heard the Spirent interface was quite handy for generating scripts from GUI interactions, but I have not used it myself. HTHs, -Eddie On Mon, Sep 26, 2011 at 6:03 AM, Erik Bais eb...@a2b-internet.com wrote: Perhaps not a tool as in software, but clearly something that you might want to have a look at : Ixia and Spirent devices ... Those are mostly used for applications like generating different kind of traffic. Erik Bais
RE: flow generating tool
The test plan you use depends upon what you want to test - raw pps throughput, route convergence time, qos performance, etc. We use Exfo (http://www.exfo.com) testers working to a mac-swap loopback for commissioning testing of Ethernet access circuits, looking at the usual loss/throughput/latency/jitter metrics and burst size. When checking out new equipment in the lab we also use scapy scripts (http://www.secdev.org/projects/scapy/) to look at things like Ethertype and L2CP transparency. Jonathon -Original Message- From: Jason Leschnik [mailto:lesch...@gmail.com] Sent: Tuesday, 27 September 2011 3:02 a.m. To: jiaruc...@gmail.com Cc: George Jones; nanog@nanog.org; Naiden Dimitrov Subject: Re: flow generating tool Does anyone follow a network performance testing methodology, using hardware from companies like ixia/spirent? I know that basic testing is typically done for validation of configs, but i assume other issues would make themselves apparent when pushed to these higher loads. thoughts/comments? Thanks -- Regards, Jason Leschnik. [m] 0432 35 4224 [w@] jason dot leschnik at ansto dot gov dot aujason.lesch...@ansto.gov.au [U@] jml...@uow.edu.au This email and attachments: are confidential; may be protected by privilege and copyright; if received in error may not be used, copied, or kept; are not guaranteed to be virus-free; may not express the views of Kordia(R); do not designate an information system; and do not give rise to any liability for Kordia(R).
flow generating tool
Hello, I need a tool that generates traffic flows from different source IP addresses for network tests. Regards, Naiden Dimitrov Mobile: +359 885 906 155 naiden.dimit...@maxtelecom.bgmailto:naiden.dimit...@maxtelecom.bg www.maxtelecom.bghttp://www.maxtelecom.bg
