Re: smbd (samba) opens too many files (fstat)
Christos Zoulas schrieb: In article <516d48e1-48d6-794d-b491-c7a66ddd2...@teccmail.de>, Andreas Beck <li...@teccmail.de> wrote: Hello, one of my samba-servers opens too many files until notification "Too many open files) from the system. fstat | grep smbd |wc -l 1704 after 2h. Is there a way, to reduce open files in samba, or must I set more descriptors? I think, 1704 open files, while copying 5GB small files, does not look good. Regards, Andreas fstat: ... root smbd 538 816* internet stream tcp root smbd 538 817* internet stream tcp root smbd 538 818* internet stream tcp root smbd 538 819* internet stream tcp root smbd 538 820* internet stream tcp root smbd 538 821* internet stream tcp root smbd 538 822* internet stream tcp root smbd 538 823* internet stream tcp root smbd 538 824* internet stream tcp root smbd 538 825* internet stream tcp root smbd 538 826* internet stream tcp root smbd 538 827* internet stream tcp root smbd 538 828* internet stream tcp root smbd 538 829* internet stream tcp root smbd 538 830* internet stream tcp root smbd 538 831* internet stream tcp root smbd 538 832* internet stream tcp root smbd 538 833* internet stream tcp root smbd 538 834* internet stream tcp root smbd 538 835* internet stream tcp root smbd 538 836* internet stream tcp root smbd 538 837* internet stream tcp root smbd 538 838* internet stream tcp root smbd 538 839* internet stream tcp root smbd 538 840* internet stream tcp root smbd 538 841* internet stream tcp root smbd 538 842* internet stream tcp root smbd 538 843* internet stream tcp root smbd 538 844* internet stream tcp root smbd 538 845* internet stream tcp root smbd 538 846* internet stream tcp root smbd 538 847* internet stream tcp root smbd 538 848* internet stream tcp root smbd 538 849* internet stream tcp from smb.conf(5) max open files (G) This parameter limits the maximum number of open files that one smbd(8) file serving process may have open for a client at any one time. The This parameter can be set very high (16404) as Samba uses only one bit per unopened file. Setting this parameter lower than 16404 will cause Samba to complain and set this value back to the minimum of 16404, as Windows 7 depends on this number of open file handles being available. The limit of the number of open files is usually set by the UNIX per-process file descriptor limit rather than this parameter so you should never need to touch this parameter. Default: max open files = 16404 christos Thanks!
Re: smbd (samba) opens too many files (fstat)
This problem exists also only on one server, why I could not clarify so far and have also built the latest package, without success. When I restart smbd, then fstat (open files) is okay again. Regards, Andreas Andreas Beck schrieb: Hello, one of my samba-servers opens too many files until notification "Too many open files) from the system. fstat | grep smbd |wc -l 1704 after 2h. Is there a way, to reduce open files in samba, or must I set more descriptors? I think, 1704 open files, while copying 5GB small files, does not look good. Regards, Andreas fstat: ... root smbd 538 816* internet stream tcp root smbd 538 817* internet stream tcp root smbd 538 818* internet stream tcp root smbd 538 819* internet stream tcp root smbd 538 820* internet stream tcp root smbd 538 821* internet stream tcp root smbd 538 822* internet stream tcp root smbd 538 823* internet stream tcp root smbd 538 824* internet stream tcp root smbd 538 825* internet stream tcp root smbd 538 826* internet stream tcp root smbd 538 827* internet stream tcp root smbd 538 828* internet stream tcp root smbd 538 829* internet stream tcp root smbd 538 830* internet stream tcp root smbd 538 831* internet stream tcp root smbd 538 832* internet stream tcp root smbd 538 833* internet stream tcp root smbd 538 834* internet stream tcp root smbd 538 835* internet stream tcp root smbd 538 836* internet stream tcp root smbd 538 837* internet stream tcp root smbd 538 838* internet stream tcp root smbd 538 839* internet stream tcp root smbd 538 840* internet stream tcp root smbd 538 841* internet stream tcp root smbd 538 842* internet stream tcp root smbd 538 843* internet stream tcp root smbd 538 844* internet stream tcp root smbd 538 845* internet stream tcp root smbd 538 846* internet stream tcp root smbd 538 847* internet stream tcp root smbd 538 848* internet stream tcp root smbd 538 849* internet stream tcp ...
smbd (samba) opens too many files (fstat)
Hello, one of my samba-servers opens too many files until notification "Too many open files) from the system. fstat | grep smbd |wc -l 1704 after 2h. Is there a way, to reduce open files in samba, or must I set more descriptors? I think, 1704 open files, while copying 5GB small files, does not look good. Regards, Andreas fstat: ... root smbd 538 816* internet stream tcp root smbd 538 817* internet stream tcp root smbd 538 818* internet stream tcp root smbd 538 819* internet stream tcp root smbd 538 820* internet stream tcp root smbd 538 821* internet stream tcp root smbd 538 822* internet stream tcp root smbd 538 823* internet stream tcp root smbd 538 824* internet stream tcp root smbd 538 825* internet stream tcp root smbd 538 826* internet stream tcp root smbd 538 827* internet stream tcp root smbd 538 828* internet stream tcp root smbd 538 829* internet stream tcp root smbd 538 830* internet stream tcp root smbd 538 831* internet stream tcp root smbd 538 832* internet stream tcp root smbd 538 833* internet stream tcp root smbd 538 834* internet stream tcp root smbd 538 835* internet stream tcp root smbd 538 836* internet stream tcp root smbd 538 837* internet stream tcp root smbd 538 838* internet stream tcp root smbd 538 839* internet stream tcp root smbd 538 840* internet stream tcp root smbd 538 841* internet stream tcp root smbd 538 842* internet stream tcp root smbd 538 843* internet stream tcp root smbd 538 844* internet stream tcp root smbd 538 845* internet stream tcp root smbd 538 846* internet stream tcp root smbd 538 847* internet stream tcp root smbd 538 848* internet stream tcp root smbd 538 849* internet stream tcp ...
Re: proc.curproc.rlimit.descriptors.hard/soft can not be increased
Okay, ive done the job by editing /etc/login.conf. Andreas Beck schrieb: Hello, ive a Problem with 8.0_BETA and increasing proc.curproc.rlimit.descriptors.hard and proc.curproc.rlimit.descriptors.soft When I do "sysctl -w" or in /etc/sysctl.conf the values cant be increased. Increasing of kern.maxfiles is possible. Best Regards, Andreas
proc.curproc.rlimit.descriptors.hard/soft can not be increased
Hello, ive a Problem with 8.0_BETA and increasing proc.curproc.rlimit.descriptors.hard and proc.curproc.rlimit.descriptors.soft When I do "sysctl -w" or in /etc/sysctl.conf the values cant be increased. Increasing of kern.maxfiles is possible. Best Regards, Andreas
Re: Hypervisor advice
On Sat, Jul 29, 2017 at 10:50:34AM -0700, Andy Ruhl wrote: > I've had a NetBSD/i386 machine that's been running since the late 90s > and various hardware iterations. I think it's time to move it to a > virtual machine. I need new hardware as well. It has about a 10 year > old AMD processor and 1 gig of memory. This is plenty, but the > hardware is getting unreliable. > > I need advice on hypervisors and if it requires certain hardware, > hardware advice as well. > > bhyve appeals to me for obvious reasons but I've never used it. I use > KVM and VMWare at work. Also VMWare Fusion on my Mac. Would prefer not > to pay too much if I need to pay for something. Never tried Xen but I > see posts about it here once in a while. > > I plan on running other stuff on the hypervisor, probably OpenBSD. > Possibly something else as well, maybe a NAS or something. > > Thoughts? > > Thanks. > > Andy Hi, I use FreeBSD 11.1 with "vm" a managment tool for bhyve. Im runing from "vm" netbsd and openbsd, successfully. Sometimes @reboot the vm's comes not fully up. I will try to solve the problem at a later time. Best Regards, Andreas
Re: NetBSD 8.0-BETA NFS Server over OpenVPN: mount_nfs: can't access /: Permission denied
On Mon, Jul 24, 2017 at 10:55:28AM +0200, Hauke Fath wrote: > On 07/23/17 19:03, Andreas Beck wrote: > > When I want to mount from the client, i get this error: > > mount_nfs: can't access /: Permission denied > > [...] > > > /etc/exports > > / -network 10.8.0.0 -mask 255.255.255.255 -maproot=root > > Unless 10.8.0.0 is the client's address (and you have > net.inet.ip.hostzerobroadcast=0 to make use of the all-zeroes sublet > address), your subnet mask will not match any host. > > Cheerio, > hauke > > > > -- > The ASCII Ribbon CampaignHauke Fath > () No HTML/RTF in email Institut für Nachrichtentechnik > /\ No Word docs in email TU Darmstadt > Respect for open standards Ruf +49-6151-16-21344 Yes, right. 255.255.255.255 cant work. This was the Problem, and now it works! Regards, Andreas
Re: NetBSD 8.0-BETA NFS Server over OpenVPN: mount_nfs: can't access /: Permission denied
Andreas Beck schrieb: => Hello, => => i want to use nfsd via openvpn (openvpn runs on udp). => Both, Server and Client are NetBSD8-BETA => => When I want to mount from the client, i get this error: => mount_nfs: can't access /: Permission denied => => [...] => => /etc/exports => / -network 10.8.0.0 -mask 255.255.255.255 -maproot=root => => Ive created for testing a hosts.allow with ALL: ALL. => There is no hosts.deny. => => Best Regards, => Andreas => Does "/etc/rc.d/mountd reload" or "/etc/rc.d/mountd restart" help? If the openvpn network doesn't exist when mountd starts then it may not be setting up the exports properly. Gary Duzan Hi Gary, reloading or restarting from mountd isnt fixing the problem, after restarting mountd, the same problem. mount_nfs: can't access /: Permission denied Andreas With: / -network 127.0.0.0 -mask 255.0.0.0 -maproot=root and mounting from local, absoluty no problem. NFSD over openvpn is under all system always an annoyance and must set certain options so that it works. Regards, Andreas
Re: NetBSD 8.0-BETA NFS Server over OpenVPN: mount_nfs: can't access /: Permission denied
=> Hello, => => i want to use nfsd via openvpn (openvpn runs on udp). => Both, Server and Client are NetBSD8-BETA => => When I want to mount from the client, i get this error: => mount_nfs: can't access /: Permission denied => => [...] => => /etc/exports => / -network 10.8.0.0 -mask 255.255.255.255 -maproot=root => => Ive created for testing a hosts.allow with ALL: ALL. => There is no hosts.deny. => => Best Regards, => Andreas => Does "/etc/rc.d/mountd reload" or "/etc/rc.d/mountd restart" help? If the openvpn network doesn't exist when mountd starts then it may not be setting up the exports properly. Gary Duzan Hi Gary, reloading or restarting from mountd isnt fixing the problem, after restarting mountd, the same problem. mount_nfs: can't access /: Permission denied Andreas
NetBSD 8.0-BETA NFS Server over OpenVPN: mount_nfs: can't access /: Permission denied
Hello, i want to use nfsd via openvpn (openvpn runs on udp). Both, Server and Client are NetBSD8-BETA When I want to mount from the client, i get this error: mount_nfs: can't access /: Permission denied From client: rpcinfo -p program vers proto port service 104 tcp111 portmapper 103 tcp111 portmapper 102 tcp111 portmapper 104 udp111 portmapper 103 udp111 portmapper 102 udp111 portmapper 104 local111 portmapper 103 local111 portmapper 102 local111 portmapper 151 udp 1022 mountd 153 udp 1022 mountd 151 tcp 1023 mountd 153 tcp 1023 mountd 132 udp 2049 nfs 133 udp 2049 nfs 132 tcp 2049 nfs 133 tcp 2049 nfs 1000241 udp 1021 status 1000241 tcp 1022 status 1000210 udp 1020 nlockmgr 1000211 udp 1020 nlockmgr 1000213 udp 1020 nlockmgr 1000214 udp 1020 nlockmgr 1000210 tcp 1021 nlockmgr 1000211 tcp 1021 nlockmgr 1000213 tcp 1021 nlockmgr 1000214 tcp 1021 nlockmgr /etc/exports / -network 10.8.0.0 -mask 255.255.255.255 -maproot=root Ive created for testing a hosts.allow with ALL: ALL. There is no hosts.deny. Best Regards, Andreas
Re: NetBSD 8 install image for amd64?
http://nyftp.netbsd.org/pub/NetBSD-daily/netbsd-8/201706190930Z/images/ Greets, Andreas Jukka Marin schrieb: Hi, Is the NetBSD 8 install image for amd64 available somewhere? I need to install from USB stick, so the .iso image does not work (and I have no suitable NetBSD system to build the image myself). Thanks! -jm
Re: xsane and root permissions
yes, I think so too, in the manpage ive send here are three devices listed. http://netbsd.gw.com/cgi-bin/man-cgi?ss+4.i386+NetBSD-7.0.2 BERTRAND Joël schrieb: Andreas Beck a écrit : https://wiki.netbsd.org/scanner/ " User access To grant another user access to use the scanner, create a 'scanner' group. |# groupadd scanner | Add user to the group scanner: |# usermod -G scanner user_name | Change group for a device: |# chgrp scanner /dev/ugen* | For some drivers, you also need access to the usb bus devices: |# chgrp scanner /dev/usb* | Also check if the permissions are sufficient, otherwise also do: |# chmod g+rw /dev/usb* /dev/ugen* "| I have tried a lot of different configuration withouts any result. As my scanner was unreachable, I have tried with 777 permissions (on /dev/ss0, it's a SCSI scanner). Same result. Thus, I have tried with root privileges and it works as expected. I suppose xsane uses another device or file... Regards, JB
Re: xsane and root permissions
http://netbsd.gw.com/cgi-bin/man-cgi?ss+4.i386+NetBSD-7.0.2 Andreas Beck schrieb: https://wiki.netbsd.org/scanner/ " User access To grant another user access to use the scanner, create a 'scanner' group. |# groupadd scanner | Add user to the group scanner: |# usermod -G scanner user_name | Change group for a device: |# chgrp scanner /dev/ugen* | For some drivers, you also need access to the usb bus devices: |# chgrp scanner /dev/usb* | Also check if the permissions are sufficient, otherwise also do: |# chmod g+rw /dev/usb* /dev/ugen* "| Good Day, Andreas Andreas Beck schrieb: currently, ive no netbsd installation on this place. But, do u have added the user to other needed groups, something like, scanner, sane, saned... stuff like that? BERTRAND Joël schrieb: Andreas Beck a écrit : Hi, put your user in the staff group and test it with chmod 777 /dev/ss0 (only for testing, chmod 777) If its not working, its no rights Problem. Thanks for your answer. My user is in staff group and permissions on /dev/ss0 is 777. With root privileges, xsane runs as expected. If it's not a permission issue, I don't know what kind of trouble it could be... Regards, JB
Re: xsane and root permissions
https://wiki.netbsd.org/scanner/ " User access To grant another user access to use the scanner, create a 'scanner' group. |# groupadd scanner | Add user to the group scanner: |# usermod -G scanner user_name | Change group for a device: |# chgrp scanner /dev/ugen* | For some drivers, you also need access to the usb bus devices: |# chgrp scanner /dev/usb* | Also check if the permissions are sufficient, otherwise also do: |# chmod g+rw /dev/usb* /dev/ugen* "| Good Day, Andreas Andreas Beck schrieb: currently, ive no netbsd installation on this place. But, do u have added the user to other needed groups, something like, scanner, sane, saned... stuff like that? BERTRAND Joël schrieb: Andreas Beck a écrit : Hi, put your user in the staff group and test it with chmod 777 /dev/ss0 (only for testing, chmod 777) If its not working, its no rights Problem. Thanks for your answer. My user is in staff group and permissions on /dev/ss0 is 777. With root privileges, xsane runs as expected. If it's not a permission issue, I don't know what kind of trouble it could be... Regards, JB
Re: xsane and root permissions
currently, ive no netbsd installation on this place. But, do u have added the user to other needed groups, something like, scanner, sane, saned... stuff like that? BERTRAND Joël schrieb: Andreas Beck a écrit : Hi, put your user in the staff group and test it with chmod 777 /dev/ss0 (only for testing, chmod 777) If its not working, its no rights Problem. Thanks for your answer. My user is in staff group and permissions on /dev/ss0 is 777. With root privileges, xsane runs as expected. If it's not a permission issue, I don't know what kind of trouble it could be... Regards, JB
Re: xsane and root permissions
Hi, put your user in the staff group and test it with chmod 777 /dev/ss0 (only for testing, chmod 777) If its not working, its no rights Problem. Andreas BERTRAND Joël schrieb: Hello, I use a venerable Agfa scanner 1236S (SCSI) on a Digital PWS500au workstation running NetBSD 8 (8.99.1 kernel). This scanner is known as /dev/ss0 and runs as expected with root privileges. If I try to use xsane (or sane in CLI) as regular user, xsane doesn't see my scanner. Of course, I have checked that permissions of /dev/ss0 are root:staff rw-rw-rw-. I suppose I have forgotten something, but I'm unable to find a solution. Any idea ? Best regards, JB