Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
On Mon, 14 Jan 2008 08:39:26 -0800 Stephen Hemminger <[EMAIL PROTECTED]> wrote: > > diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c > > index c27c7d6..4f41a94 100644 > > --- a/drivers/net/sky2.c > > +++ b/drivers/net/sky2.c > > @@ -2791,6 +2791,9 @@ static void sky2_reset(struct sky2_hw *hw) > > sky2_write8(hw, B0_CTST, CS_RST_SET); > > sky2_write8(hw, B0_CTST, CS_RST_CLR); > > > > + /* allow writes to PCI config */ > > + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); > > + > > /* clear PCI errors, if any */ > > pci_read_config_word(pdev, PCI_STATUS, &status); > > status |= PCI_STATUS_ERROR_BITS; > > > > fixes this regression? > > > > If so, we should revert that change. > > > > > but i noticed another "bug" on 2.6.24-rc7-git with sky2: dmesg shows a > > > lot of lines every 5 seconds: > > > > > > [...] > > > [ 357.400462] sky2 :02:00.0: error interrupt status=0xc000 > > > [ 362.442039] printk: 41 messages suppressed. > > > [ 362.442043] sky2 :02:00.0: error interrupt status=0x8000 > > > [ 367.439151] printk: 18 messages suppressed. > > > [ 367.439156] sky2 :02:00.0: error interrupt status=0x8000 > > > [ 372.436267] printk: 30 messages suppressed. > > > [ 372.436271] sky2 :02:00.0: error interrupt status=0x8000 > > > [ 377.350236] printk: 19 messages suppressed. > > > [...] > > > > > > since i do not notice any errors (yet) i'll wait till next rc, maybe it > > > will be gone then... > > > > That's not good. is this new behaviour? > > > > No, reverting that change will break other systems (including mine). Reverting which change? ac93a3946b676025fa55356180e8321639744b31? Linus has very clearly stated on multiple occasions that patches which fix machine A and break machine B will be reverted. For good reasons. I don't have a copy of those reasons handy, but it should be a well-known thing. If you're really interested we can cc him for a reminder, but the effects of that upon ac93a3946b676025fa55356180e8321639744b31 might be quick. And terminal. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
On Sun, 13 Jan 2008 11:27:12 -0800 Andrew Morton <[EMAIL PROTECTED]> wrote: > On Sun, 13 Jan 2008 16:08:38 +0100 supersud501 <[EMAIL PROTECTED]> wrote: > > > > > > > supersud501 wrote: > > > > > > > > > Rafael J. Wysocki wrote: > > > > > >> > > >> Since it seems to be 100% reproducible, it would be very helpful if > > >> you could > > >> use git-bisect to identify the offending commit. > > >> > > > > > > allright, bisect found the offending commit, here's what i've done: > > > > > > first i started bisect with the following command (since i assumed it is > > > a net-driver problem): > > > > > > git-bisect start 'v2.6.24-rc6' 'v2.6.23' '--' 'drivers/net/' > > > > > > after building many kernels and saying good/bad if wol worked/didn't > > > work etc. it identified the following commit: > > > > > > # bad: [ac93a3946b676025fa55356180e8321639744b31] sky2: enable PCI > > > config writes > > > > > > and refs/bisect/bad gives: > > > > > > 14:16:53 /usr/src/linux-2.6/.git # cat refs/bisect/bad > > > ac93a3946b676025fa55356180e8321639744b31 > > > > > > > > > need some more info? > > > > > > > i just checked it: commented out the passage of the commit in kernel > > 2.6.24-rc7-git4 and compiled it: wol WORKS. so this one line is causing > > my wol-disturbance... > > > > > > So simply reverting this: > > commit ac93a3946b676025fa55356180e8321639744b31 > Author: Stephen Hemminger <[EMAIL PROTECTED]> > Date: Mon Nov 5 15:52:08 2007 -0800 > > sky2: enable PCI config writes > > On some boards, PCI configuration space access is turned off by default. > The 2.6.24 driver doesn't turn it on, and should have. > > Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]> > Signed-off-by: Jeff Garzik <[EMAIL PROTECTED]> > > diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c > index c27c7d6..4f41a94 100644 > --- a/drivers/net/sky2.c > +++ b/drivers/net/sky2.c > @@ -2791,6 +2791,9 @@ static void sky2_reset(struct sky2_hw *hw) > sky2_write8(hw, B0_CTST, CS_RST_SET); > sky2_write8(hw, B0_CTST, CS_RST_CLR); > > + /* allow writes to PCI config */ > + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); > + > /* clear PCI errors, if any */ > pci_read_config_word(pdev, PCI_STATUS, &status); > status |= PCI_STATUS_ERROR_BITS; > > fixes this regression? > > If so, we should revert that change. > > > but i noticed another "bug" on 2.6.24-rc7-git with sky2: dmesg shows a > > lot of lines every 5 seconds: > > > > [...] > > [ 357.400462] sky2 :02:00.0: error interrupt status=0xc000 > > [ 362.442039] printk: 41 messages suppressed. > > [ 362.442043] sky2 :02:00.0: error interrupt status=0x8000 > > [ 367.439151] printk: 18 messages suppressed. > > [ 367.439156] sky2 :02:00.0: error interrupt status=0x8000 > > [ 372.436267] printk: 30 messages suppressed. > > [ 372.436271] sky2 :02:00.0: error interrupt status=0x8000 > > [ 377.350236] printk: 19 messages suppressed. > > [...] > > > > since i do not notice any errors (yet) i'll wait till next rc, maybe it > > will be gone then... > > That's not good. is this new behaviour? > No, reverting that change will break other systems (including mine). -- Stephen Hemminger <[EMAIL PROTECTED]> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
Rafael J. Wysocki wrote:
I wonder if commit 84cd2dfb04d23a961c5f537baa243fa54d0987ac
"sky2: remove check for PCI wakeup setting from BIOS" has anything to do with
it, btw.
supersud501, can you please check if the bug is still present in the current
Linus' tree?
I checked it (after git pulling the dir), and it still doesn't work. but
the dmesg-output wasn't filled with those errors i reported before anymore.
after removing that one commit ("enable PCI config writes") wol works
again, but the dmesg output is filled too! so that seems to be the
source of the full dmesg-output. here a little bit more of the
dmesg-output (but maybe i should open a new bug report?)
[...] rmmod sky2 --->
[ 1182.964000] sky2 eth0: disabling interface
[ 1183.255862] ACPI: PCI interrupt for device :02:00.0 disabled
modprobe syk2 -->
[ 1192.951021] ACPI: PCI Interrupt :02:00.0[A] -> GSI 19 (level,
low) -> IRQ 19
[ 1192.951034] PCI: Setting latency timer of device :02:00.0 to 64
[ 1192.951618] sky2 :02:00.0: v1.20 addr 0xf89fc000 irq 19 Yukon-EC
(0xb6) rev 2
[ 1192.951636] sky2 :02:00.0: ignoring stuck error report bit
[ 1192.952425] sky2 eth0: addr 00:18:f3:fe:93:11
ifdown eth0 && ifup eth0 -->
[ 1207.425171] sky2 eth0: enabling interface
[ 1209.806138] printk: 97 messages suppressed.
[ 1209.806143] sky2 :02:00.0: error interrupt status=0x8010
[ 1209.807184] sky2 eth0: Link is up at 100 Mbps, full duplex, flow
control rx
[ 1209.807502] sky2 :02:00.0: error interrupt status=0x8000
[ 1210.621117] sky2 :02:00.0: error interrupt status=0xc000
[ 1210.660325] sky2 :02:00.0: error interrupt status=0x8000
[ 1210.996873] sky2 :02:00.0: error interrupt status=0xc000
[ 1211.645470] printk: 1 messages suppressed.
[ 1211.645474] sky2 :02:00.0: error interrupt status=0xc000
[ 1216.656564] printk: 328 messages suppressed.
[ 1216.656569] sky2 :02:00.0: error interrupt status=0x8000
[ 1221.653677] printk: 17 messages suppressed.
[ 1221.653681] sky2 :02:00.0: error interrupt status=0x8000
--> every 5 sec a new error
[...]
-
and i noticed one more thing (i thought would just happen occasionally):
everytime wol does not work (sending the magic packet does nothing), i
have to cut off my pc completely from power because otherwise (powering
it up by power button) it hangs endless on hard-disk-dedection (s-ata).
other users with my mobo report same issues from time to time, but mine
seems to be 100% reproducable.
reenabling wol by removing the commit fixes this problem, too. the next
new bug report i think.
-
btw, if anyone could tell me a way to rebuild only some modules (so i
get the .ko file directly and can replace it by hand in
/lib/modules/...) i could hack around a little bit too in sky2.c (or so)
without the need to reinstall the whole kernel in order to test it...
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
I wonder if commit 84cd2dfb04d23a961c5f537baa243fa54d0987ac "sky2: remove check for PCI wakeup setting from BIOS" has anything to do with it, btw. supersud501, can you please check if the bug is still present in the current Linus' tree? -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
On Sunday, 13 of January 2008, Andrew Morton wrote: > > 2.6.23 also has this warning in sky2_err_intr() but it doesn't trigger > there. Rafael, I think we'd have to class this as a post-2.6.23 > regression. Yes, it's been being tracked already. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
On Sun, 13 Jan 2008 21:27:40 +0100 supersud501 <[EMAIL PROTECTED]> wrote: > > > Andrew Morton wrote: > > > > So simply reverting this: > > > > commit ac93a3946b676025fa55356180e8321639744b31 > > Author: Stephen Hemminger <[EMAIL PROTECTED]> > > Date: Mon Nov 5 15:52:08 2007 -0800 > > > > sky2: enable PCI config writes > > > > On some boards, PCI configuration space access is turned off by default. > > The 2.6.24 driver doesn't turn it on, and should have. > > > > Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]> > > Signed-off-by: Jeff Garzik <[EMAIL PROTECTED]> > > > > diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c > > index c27c7d6..4f41a94 100644 > > --- a/drivers/net/sky2.c > > +++ b/drivers/net/sky2.c > > @@ -2791,6 +2791,9 @@ static void sky2_reset(struct sky2_hw *hw) > > sky2_write8(hw, B0_CTST, CS_RST_SET); > > sky2_write8(hw, B0_CTST, CS_RST_CLR); > > > > + /* allow writes to PCI config */ > > + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); > > + > > /* clear PCI errors, if any */ > > pci_read_config_word(pdev, PCI_STATUS, &status); > > status |= PCI_STATUS_ERROR_BITS; > > > > fixes this regression? > > > > If so, we should revert that change. > > > > > yes, it does. > OK, thanks. I queued up the revert and shall wait to hear from Stephen/David/Jeff on this. > > >> but i noticed another "bug" on 2.6.24-rc7-git with sky2: dmesg shows a > >> lot of lines every 5 seconds: > >> > >> [...] > >> [ 357.400462] sky2 :02:00.0: error interrupt status=0xc000 > >> [ 362.442039] printk: 41 messages suppressed. > >> [ 362.442043] sky2 :02:00.0: error interrupt status=0x8000 > >> [ 367.439151] printk: 18 messages suppressed. > >> [ 367.439156] sky2 :02:00.0: error interrupt status=0x8000 > >> [ 372.436267] printk: 30 messages suppressed. > >> [ 372.436271] sky2 :02:00.0: error interrupt status=0x8000 > >> [ 377.350236] printk: 19 messages suppressed. > >> [...] > >> > >> since i do not notice any errors (yet) i'll wait till next rc, maybe it > >> will be gone then... > > > > That's not good. is this new behaviour? > > > > > > at least on 2.6.23.12 i doesn't happen, so it's now for me in > 2.6.24-rc7-git4 (but again, not testet in earlier versions of 2.6.24). > > since i do not feel any sideeffects yet after using it for ~6 hours > (besides a really long dmesg-output), it's just a little bit annoying. > > if there's a way to identify the source of the problem besides of > bisecting, just say so and i will take a look into it the next days. if > bisecting is the only (time-consuming) way you have to wait at least > until the next weekend :) 2.6.23 also has this warning in sky2_err_intr() but it doesn't trigger there. Rafael, I think we'd have to class this as a post-2.6.23 regression. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
Andrew Morton wrote: So simply reverting this: commit ac93a3946b676025fa55356180e8321639744b31 Author: Stephen Hemminger <[EMAIL PROTECTED]> Date: Mon Nov 5 15:52:08 2007 -0800 sky2: enable PCI config writes On some boards, PCI configuration space access is turned off by default. The 2.6.24 driver doesn't turn it on, and should have. Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]> Signed-off-by: Jeff Garzik <[EMAIL PROTECTED]> diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c27c7d6..4f41a94 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2791,6 +2791,9 @@ static void sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_RST_SET); sky2_write8(hw, B0_CTST, CS_RST_CLR); + /* allow writes to PCI config */ + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + /* clear PCI errors, if any */ pci_read_config_word(pdev, PCI_STATUS, &status); status |= PCI_STATUS_ERROR_BITS; fixes this regression? If so, we should revert that change. yes, it does. but i noticed another "bug" on 2.6.24-rc7-git with sky2: dmesg shows a lot of lines every 5 seconds: [...] [ 357.400462] sky2 :02:00.0: error interrupt status=0xc000 [ 362.442039] printk: 41 messages suppressed. [ 362.442043] sky2 :02:00.0: error interrupt status=0x8000 [ 367.439151] printk: 18 messages suppressed. [ 367.439156] sky2 :02:00.0: error interrupt status=0x8000 [ 372.436267] printk: 30 messages suppressed. [ 372.436271] sky2 :02:00.0: error interrupt status=0x8000 [ 377.350236] printk: 19 messages suppressed. [...] since i do not notice any errors (yet) i'll wait till next rc, maybe it will be gone then... That's not good. is this new behaviour? at least on 2.6.23.12 i doesn't happen, so it's now for me in 2.6.24-rc7-git4 (but again, not testet in earlier versions of 2.6.24). since i do not feel any sideeffects yet after using it for ~6 hours (besides a really long dmesg-output), it's just a little bit annoying. if there's a way to identify the source of the problem besides of bisecting, just say so and i will take a look into it the next days. if bisecting is the only (time-consuming) way you have to wait at least until the next weekend :) -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
On Sun, 13 Jan 2008 16:08:38 +0100 supersud501 <[EMAIL PROTECTED]> wrote: > > > supersud501 wrote: > > > > > > Rafael J. Wysocki wrote: > > > >> > >> Since it seems to be 100% reproducible, it would be very helpful if > >> you could > >> use git-bisect to identify the offending commit. > >> > > > > allright, bisect found the offending commit, here's what i've done: > > > > first i started bisect with the following command (since i assumed it is > > a net-driver problem): > > > > git-bisect start 'v2.6.24-rc6' 'v2.6.23' '--' 'drivers/net/' > > > > after building many kernels and saying good/bad if wol worked/didn't > > work etc. it identified the following commit: > > > > # bad: [ac93a3946b676025fa55356180e8321639744b31] sky2: enable PCI > > config writes > > > > and refs/bisect/bad gives: > > > > 14:16:53 /usr/src/linux-2.6/.git # cat refs/bisect/bad > > ac93a3946b676025fa55356180e8321639744b31 > > > > > > need some more info? > > > > i just checked it: commented out the passage of the commit in kernel > 2.6.24-rc7-git4 and compiled it: wol WORKS. so this one line is causing > my wol-disturbance... > > So simply reverting this: commit ac93a3946b676025fa55356180e8321639744b31 Author: Stephen Hemminger <[EMAIL PROTECTED]> Date: Mon Nov 5 15:52:08 2007 -0800 sky2: enable PCI config writes On some boards, PCI configuration space access is turned off by default. The 2.6.24 driver doesn't turn it on, and should have. Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]> Signed-off-by: Jeff Garzik <[EMAIL PROTECTED]> diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c27c7d6..4f41a94 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2791,6 +2791,9 @@ static void sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_RST_SET); sky2_write8(hw, B0_CTST, CS_RST_CLR); + /* allow writes to PCI config */ + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + /* clear PCI errors, if any */ pci_read_config_word(pdev, PCI_STATUS, &status); status |= PCI_STATUS_ERROR_BITS; fixes this regression? If so, we should revert that change. > but i noticed another "bug" on 2.6.24-rc7-git with sky2: dmesg shows a > lot of lines every 5 seconds: > > [...] > [ 357.400462] sky2 :02:00.0: error interrupt status=0xc000 > [ 362.442039] printk: 41 messages suppressed. > [ 362.442043] sky2 :02:00.0: error interrupt status=0x8000 > [ 367.439151] printk: 18 messages suppressed. > [ 367.439156] sky2 :02:00.0: error interrupt status=0x8000 > [ 372.436267] printk: 30 messages suppressed. > [ 372.436271] sky2 :02:00.0: error interrupt status=0x8000 > [ 377.350236] printk: 19 messages suppressed. > [...] > > since i do not notice any errors (yet) i'll wait till next rc, maybe it > will be gone then... That's not good. is this new behaviour? -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
supersud501 wrote: Rafael J. Wysocki wrote: Since it seems to be 100% reproducible, it would be very helpful if you could use git-bisect to identify the offending commit. allright, bisect found the offending commit, here's what i've done: first i started bisect with the following command (since i assumed it is a net-driver problem): git-bisect start 'v2.6.24-rc6' 'v2.6.23' '--' 'drivers/net/' after building many kernels and saying good/bad if wol worked/didn't work etc. it identified the following commit: # bad: [ac93a3946b676025fa55356180e8321639744b31] sky2: enable PCI config writes and refs/bisect/bad gives: 14:16:53 /usr/src/linux-2.6/.git # cat refs/bisect/bad ac93a3946b676025fa55356180e8321639744b31 need some more info? i just checked it: commented out the passage of the commit in kernel 2.6.24-rc7-git4 and compiled it: wol WORKS. so this one line is causing my wol-disturbance... but i noticed another "bug" on 2.6.24-rc7-git with sky2: dmesg shows a lot of lines every 5 seconds: [...] [ 357.400462] sky2 :02:00.0: error interrupt status=0xc000 [ 362.442039] printk: 41 messages suppressed. [ 362.442043] sky2 :02:00.0: error interrupt status=0x8000 [ 367.439151] printk: 18 messages suppressed. [ 367.439156] sky2 :02:00.0: error interrupt status=0x8000 [ 372.436267] printk: 30 messages suppressed. [ 372.436271] sky2 :02:00.0: error interrupt status=0x8000 [ 377.350236] printk: 19 messages suppressed. [...] since i do not notice any errors (yet) i'll wait till next rc, maybe it will be gone then... but i'm happy wol works again on 2.6.24 :) -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
Rafael J. Wysocki wrote: Since it seems to be 100% reproducible, it would be very helpful if you could use git-bisect to identify the offending commit. allright, bisect found the offending commit, here's what i've done: first i started bisect with the following command (since i assumed it is a net-driver problem): git-bisect start 'v2.6.24-rc6' 'v2.6.23' '--' 'drivers/net/' after building many kernels and saying good/bad if wol worked/didn't work etc. it identified the following commit: # bad: [ac93a3946b676025fa55356180e8321639744b31] sky2: enable PCI config writes and refs/bisect/bad gives: 14:16:53 /usr/src/linux-2.6/.git # cat refs/bisect/bad ac93a3946b676025fa55356180e8321639744b31 need some more info? -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
> http://bugzilla.kernel.org/show_bug.cgi?id=9721 On Saturday, 12 of January 2008, supersud501 wrote: > I'll do the git-bisect (just downloading linux-2.6.git), but i forgot to > mention one little thing: i'm using x64 version of kernel - does this > play an important role? No, it doesn't. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
Rafael J. Wysocki wrote: On Friday, 11 of January 2008, supersud501 wrote: Rafael J. Wysocki wrote: http://bugzilla.kernel.org/show_bug.cgi?id=9721 allright, didn't see that before, sorry, here are the results: kernel 2.6.23.12 acpi=off: when shutting down the system doesn't poweroff (of course), but pressing the powerbutton does the trick. and wake on lan: WORKS kernel 2.6.24-rc7 acpi=off: computer doesn't power off, either (so acpi=off works), but wol still DOESN'T work :( so no acpi-problem? No, I don't think it's an ACPI problem. Since it seems to be 100% reproducible, it would be very helpful if you could use git-bisect to identify the offending commit. I'll do the git-bisect (just downloading linux-2.6.git), but i forgot to mention one little thing: i'm using x64 version of kernel - does this play an important role? -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
On Friday, 11 of January 2008, supersud501 wrote: > > Rafael J. Wysocki wrote: > >> http://bugzilla.kernel.org/show_bug.cgi?id=9721 > allright, didn't see that before, sorry, here are the results: > > kernel 2.6.23.12 acpi=off: when shutting down the system doesn't > poweroff (of course), but pressing the powerbutton does the trick. and > wake on lan: WORKS > > kernel 2.6.24-rc7 acpi=off: computer doesn't power off, either (so > acpi=off works), but wol still DOESN'T work :( > > so no acpi-problem? No, I don't think it's an ACPI problem. Since it seems to be 100% reproducible, it would be very helpful if you could use git-bisect to identify the offending commit. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
Rafael J. Wysocki wrote: http://bugzilla.kernel.org/show_bug.cgi?id=9721 On Friday, 11 of January 2008, supersud501 wrote: Stephen Hemminger wrote: On Wed, 9 Jan 2008 16:03:00 -0800 Andrew Morton <[EMAIL PROTECTED]> wrote: (switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). On Wed, 9 Jan 2008 13:05:34 -0800 (PST) [EMAIL PROTECTED] wrote: http://bugzilla.kernel.org/show_bug.cgi?id=9721 Summary: wake on lan fails with sky2 module Product: ACPI Version: 2.5 KernelVersion: 2.6.24-rc7 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Power-Sleep-Wake AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] This post-2.6.23 regression was assigned to ACPI but is quite possibly a net driver problem? Latest working kernel version: 2.6.23.12 Earliest failing kernel version: 2.6.24-rc6 (not tested earlier kernel, 2.6.24-rc7 still failing) Distribution: Ubuntu 8.04 (but Kernel build from Kernel.org and system modifiet to make wake on lan work, i.e. network cards are not shutted down on poweroff) Hardware Environment: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20) onboard Asus P5W DH motherboard, uses module SKY2 Software Environment: Problem Description: When enabling wake on lan with: 'ethtool -s eth0 wol' i get the following status: 21:56:29 ~ # sudo ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pg Wake-on: g< wol enabled Current message level: 0x00ff (255) Link detected: yes but after shutting down the pc doesn't wake up when magic packet is sent. the status lights of the network card are still on (so the card seems to be online). same system with only changed kernel to 2.6.23.12 and same procedure like above: wake on lan works. Steps to reproduce: enable wol on your network card using SKY2 module and it doesn't work too? if you need more information, just tell me, it's my first bug report. regards Wake from power off works on 2.6.24-rc7 for me. Wake from suspend doesn't because Network Manager, HAL, or some other user space tool gets confused. I just rechecked it with Fujitsu Lifebook, which has sky2 (88E8055). There many variations of this chip, and it maybe chip specific problem or ACPI/BIOS issues. If you don't enable Wake on Lan in BIOS, the driver can't do it for you. Also, check how you are shutting down. Also since the device has to restart the PHY, it could be a switch issue if you have some fancy pants switch doing intrusion detection or something, but I doubt that. Is it a clean or fast shutdown, most distributions mark network devices as down on shutdown, but if the distribution does something stupid like remove the driver module, then the driver is unable to setup Wake On Lan. The wake on lan setup is done in one place in the driver, add a printk to see if it is ever called. I tried ACPI wakeup with /proc/acpi/alarm (like i described in my last mail) and it worked... so ACPI wakeup seems to work. i'll try to do the printk-thing when i find some time to mess around with the sources (maybe tomorrow). if someone has some brief instructions (maybe a link to a helpfull site for kernel debugging) for me i would be thankfull and could provide some more info faster. some steps for me to identify the source of the problem (is it really sky2?) would be really helpfull... Please do the tests requested at: http://bugzilla.kernel.org/show_bug.cgi?id=9721#c2, thanks. allright, didn't see that before, sorry, here are the results: kernel 2.6.23.12 acpi=off: when shutting down the system doesn't poweroff (of course), but pressing the powerbutton does the trick. and wake on lan: WORKS kernel 2.6.24-rc7 acpi=off: computer doesn't power off, either (so acpi=off works), but wol still DOESN'T work :( so no acpi-problem? -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
> http://bugzilla.kernel.org/show_bug.cgi?id=9721 On Friday, 11 of January 2008, supersud501 wrote: > > Stephen Hemminger wrote: > > On Wed, 9 Jan 2008 16:03:00 -0800 > > Andrew Morton <[EMAIL PROTECTED]> wrote: > > > >> (switched to email. Please respond via emailed reply-to-all, not via the > >> bugzilla web interface). > >> > >> On Wed, 9 Jan 2008 13:05:34 -0800 (PST) > >> [EMAIL PROTECTED] wrote: > >> > >>> http://bugzilla.kernel.org/show_bug.cgi?id=9721 > >>> > >>>Summary: wake on lan fails with sky2 module > >>>Product: ACPI > >>>Version: 2.5 > >>> KernelVersion: 2.6.24-rc7 > >>> Platform: All > >>> OS/Version: Linux > >>> Tree: Mainline > >>> Status: NEW > >>> Severity: normal > >>> Priority: P1 > >>> Component: Power-Sleep-Wake > >>> AssignedTo: [EMAIL PROTECTED] > >>> ReportedBy: [EMAIL PROTECTED] > >> This post-2.6.23 regression was assigned to ACPI but is quite possibly a > >> net driver problem? > >> > >>> Latest working kernel version: 2.6.23.12 > >>> Earliest failing kernel version: 2.6.24-rc6 (not tested earlier kernel, > >>> 2.6.24-rc7 still failing) > >>> Distribution: Ubuntu 8.04 (but Kernel build from Kernel.org and system > >>> modifiet > >>> to make wake on lan work, i.e. network cards are not shutted down on > >>> poweroff) > >>> Hardware Environment: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit > >>> Ethernet Controller (rev 20) onboard Asus P5W DH motherboard, uses module > >>> SKY2 > >>> Software Environment: > >>> Problem Description: > >>> > >>> When enabling wake on lan with: 'ethtool -s eth0 wol' i get the following > >>> status: > >>> > >>> 21:56:29 ~ # sudo ethtool eth0 > >>> Settings for eth0: > >>> Supported ports: [ TP ] > >>> Supported link modes: 10baseT/Half 10baseT/Full > >>> 100baseT/Half 100baseT/Full > >>> 1000baseT/Half 1000baseT/Full > >>> Supports auto-negotiation: Yes > >>> Advertised link modes: 10baseT/Half 10baseT/Full > >>> 100baseT/Half 100baseT/Full > >>> 1000baseT/Half 1000baseT/Full > >>> Advertised auto-negotiation: Yes > >>> Speed: 100Mb/s > >>> Duplex: Full > >>> Port: Twisted Pair > >>> PHYAD: 0 > >>> Transceiver: internal > >>> Auto-negotiation: on > >>> Supports Wake-on: pg > >>> Wake-on: g< wol enabled > >>> Current message level: 0x00ff (255) > >>> Link detected: yes > >>> > >>> but after shutting down the pc doesn't wake up when magic packet is sent. > >>> > >>> the status lights of the network card are still on (so the card seems to > >>> be > >>> online). > >>> > >>> same system with only changed kernel to 2.6.23.12 and same procedure like > >>> above: wake on lan works. > >>> > >>> Steps to reproduce: enable wol on your network card using SKY2 module and > >>> it > >>> doesn't work too? > >>> > >>> if you need more information, just tell me, it's my first bug report. > >>> regards > >>> > > > > > > Wake from power off works on 2.6.24-rc7 for me. > > Wake from suspend doesn't because Network Manager, HAL, or some other > > user space tool gets confused. > > > > I just rechecked it with Fujitsu Lifebook, which has sky2 (88E8055). > > There many variations of this chip, and it maybe chip specific problem > > or ACPI/BIOS issues. If you don't enable Wake on Lan in BIOS, the > > driver can't do it for you. Also, check how you are shutting down. > > > > Also since the device has to restart the PHY, it could be a switch > > issue if you have some fancy pants switch doing intrusion detection > > or something, but I doubt that. > > > > Is it a clean or fast shutdown, most distributions mark network > > devices as down on shutdown, but if the distribution does something > > stupid like remove the driver module, then the driver is unable to setup > > Wake On Lan. > > The wake on lan setup is done in one place in the driver, add > > a printk to see if it is ever called. > > > > > > > I tried ACPI wakeup with /proc/acpi/alarm (like i described in my last > mail) and it worked... so ACPI wakeup seems to work. > > i'll try to do the printk-thing when i find some time to mess around > with the sources (maybe tomorrow). if someone has some brief > instructions (maybe a link to a helpfull site for kernel debugging) for > me i would be thankfull and could provide some more info faster. > > some steps for me to identify the source of the problem (is it really > sky2?) would be really helpfull... Please do the tests requested at: http://bugzilla.kernel.org/show_bug.cgi?id=9721#c2, thanks. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vge
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
Stephen Hemminger wrote: On Wed, 9 Jan 2008 16:03:00 -0800 Andrew Morton <[EMAIL PROTECTED]> wrote: (switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). On Wed, 9 Jan 2008 13:05:34 -0800 (PST) [EMAIL PROTECTED] wrote: http://bugzilla.kernel.org/show_bug.cgi?id=9721 Summary: wake on lan fails with sky2 module Product: ACPI Version: 2.5 KernelVersion: 2.6.24-rc7 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Power-Sleep-Wake AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] This post-2.6.23 regression was assigned to ACPI but is quite possibly a net driver problem? Latest working kernel version: 2.6.23.12 Earliest failing kernel version: 2.6.24-rc6 (not tested earlier kernel, 2.6.24-rc7 still failing) Distribution: Ubuntu 8.04 (but Kernel build from Kernel.org and system modifiet to make wake on lan work, i.e. network cards are not shutted down on poweroff) Hardware Environment: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20) onboard Asus P5W DH motherboard, uses module SKY2 Software Environment: Problem Description: When enabling wake on lan with: 'ethtool -s eth0 wol' i get the following status: 21:56:29 ~ # sudo ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pg Wake-on: g< wol enabled Current message level: 0x00ff (255) Link detected: yes but after shutting down the pc doesn't wake up when magic packet is sent. the status lights of the network card are still on (so the card seems to be online). same system with only changed kernel to 2.6.23.12 and same procedure like above: wake on lan works. Steps to reproduce: enable wol on your network card using SKY2 module and it doesn't work too? if you need more information, just tell me, it's my first bug report. regards Wake from power off works on 2.6.24-rc7 for me. Wake from suspend doesn't because Network Manager, HAL, or some other user space tool gets confused. I just rechecked it with Fujitsu Lifebook, which has sky2 (88E8055). There many variations of this chip, and it maybe chip specific problem or ACPI/BIOS issues. If you don't enable Wake on Lan in BIOS, the driver can't do it for you. Also, check how you are shutting down. Also since the device has to restart the PHY, it could be a switch issue if you have some fancy pants switch doing intrusion detection or something, but I doubt that. Is it a clean or fast shutdown, most distributions mark network devices as down on shutdown, but if the distribution does something stupid like remove the driver module, then the driver is unable to setup Wake On Lan. The wake on lan setup is done in one place in the driver, add a printk to see if it is ever called. I tried ACPI wakeup with /proc/acpi/alarm (like i described in my last mail) and it worked... so ACPI wakeup seems to work. i'll try to do the printk-thing when i find some time to mess around with the sources (maybe tomorrow). if someone has some brief instructions (maybe a link to a helpfull site for kernel debugging) for me i would be thankfull and could provide some more info faster. some steps for me to identify the source of the problem (is it really sky2?) would be really helpfull... -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
Stephen Hemminger schrieb: On Wed, 9 Jan 2008 16:03:00 -0800 Andrew Morton <[EMAIL PROTECTED]> wrote: (switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). On Wed, 9 Jan 2008 13:05:34 -0800 (PST) [EMAIL PROTECTED] wrote: http://bugzilla.kernel.org/show_bug.cgi?id=9721 Summary: wake on lan fails with sky2 module Product: ACPI Version: 2.5 KernelVersion: 2.6.24-rc7 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Power-Sleep-Wake AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] This post-2.6.23 regression was assigned to ACPI but is quite possibly a net driver problem? Latest working kernel version: 2.6.23.12 Earliest failing kernel version: 2.6.24-rc6 (not tested earlier kernel, 2.6.24-rc7 still failing) Distribution: Ubuntu 8.04 (but Kernel build from Kernel.org and system modifiet to make wake on lan work, i.e. network cards are not shutted down on poweroff) Hardware Environment: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20) onboard Asus P5W DH motherboard, uses module SKY2 Software Environment: Problem Description: When enabling wake on lan with: 'ethtool -s eth0 wol' i get the following status: 21:56:29 ~ # sudo ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pg Wake-on: g< wol enabled Current message level: 0x00ff (255) Link detected: yes but after shutting down the pc doesn't wake up when magic packet is sent. the status lights of the network card are still on (so the card seems to be online). same system with only changed kernel to 2.6.23.12 and same procedure like above: wake on lan works. Steps to reproduce: enable wol on your network card using SKY2 module and it doesn't work too? if you need more information, just tell me, it's my first bug report. regards Wake from power off works on 2.6.24-rc7 for me. Wake from suspend doesn't because Network Manager, HAL, or some other user space tool gets confused. I just rechecked it with Fujitsu Lifebook, which has sky2 (88E8055). There many variations of this chip, and it maybe chip specific problem or ACPI/BIOS issues. If you don't enable Wake on Lan in BIOS, the driver can't do it for you. Also, check how you are shutting down. Also since the device has to restart the PHY, it could be a switch issue if you have some fancy pants switch doing intrusion detection or something, but I doubt that. Is it a clean or fast shutdown, most distributions mark network devices as down on shutdown, but if the distribution does something stupid like remove the driver module, then the driver is unable to setup Wake On Lan. The wake on lan setup is done in one place in the driver, add a printk to see if it is ever called. I only tried wake from shutdown (poweroff), and like i wrote, on the same system with kernel 2.6.23.12 (nothing changed but vmlinuz and initrd, with the same kernel config on 2.6.24-rc6/7 (make oldconfig, default answer to all questions)), it works. so it seems to me like a problem in the kernel. every wake-up setting (wake up by pci-device, rtc-alarm, modem ...) in bios is also enabled, otherwise it couldn't work in 2.6.23.12 (and windows). if you say your sky2-card works, it might be a acpi-problem not related to sky2 like i thought - when i am at home i'll try to start my pc with a timer (--> /proc/acpi/alarm) from kernel 2.6.24-rc7 to check if acpi-wakeup works and report back (if it is any help in finding the source of my problem). and regarding "printk" i'll try to find out what you mean (my first steps into kernel debugging :) - i think you mean adding a line in the source to print out something when the function is called) regards -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
On Wed, 9 Jan 2008 16:03:00 -0800 Andrew Morton <[EMAIL PROTECTED]> wrote: > > (switched to email. Please respond via emailed reply-to-all, not via the > bugzilla web interface). > > On Wed, 9 Jan 2008 13:05:34 -0800 (PST) > [EMAIL PROTECTED] wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=9721 > > > >Summary: wake on lan fails with sky2 module > >Product: ACPI > >Version: 2.5 > > KernelVersion: 2.6.24-rc7 > > Platform: All > > OS/Version: Linux > > Tree: Mainline > > Status: NEW > > Severity: normal > > Priority: P1 > > Component: Power-Sleep-Wake > > AssignedTo: [EMAIL PROTECTED] > > ReportedBy: [EMAIL PROTECTED] > > This post-2.6.23 regression was assigned to ACPI but is quite possibly a > net driver problem? > > > > > Latest working kernel version: 2.6.23.12 > > Earliest failing kernel version: 2.6.24-rc6 (not tested earlier kernel, > > 2.6.24-rc7 still failing) > > Distribution: Ubuntu 8.04 (but Kernel build from Kernel.org and system > > modifiet > > to make wake on lan work, i.e. network cards are not shutted down on > > poweroff) > > Hardware Environment: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit > > Ethernet Controller (rev 20) onboard Asus P5W DH motherboard, uses module > > SKY2 > > Software Environment: > > Problem Description: > > > > When enabling wake on lan with: 'ethtool -s eth0 wol' i get the following > > status: > > > > 21:56:29 ~ # sudo ethtool eth0 > > Settings for eth0: > > Supported ports: [ TP ] > > Supported link modes: 10baseT/Half 10baseT/Full > > 100baseT/Half 100baseT/Full > > 1000baseT/Half 1000baseT/Full > > Supports auto-negotiation: Yes > > Advertised link modes: 10baseT/Half 10baseT/Full > > 100baseT/Half 100baseT/Full > > 1000baseT/Half 1000baseT/Full > > Advertised auto-negotiation: Yes > > Speed: 100Mb/s > > Duplex: Full > > Port: Twisted Pair > > PHYAD: 0 > > Transceiver: internal > > Auto-negotiation: on > > Supports Wake-on: pg > > Wake-on: g< wol enabled > > Current message level: 0x00ff (255) > > Link detected: yes > > > > but after shutting down the pc doesn't wake up when magic packet is sent. > > > > the status lights of the network card are still on (so the card seems to be > > online). > > > > same system with only changed kernel to 2.6.23.12 and same procedure like > > above: wake on lan works. > > > > Steps to reproduce: enable wol on your network card using SKY2 module and it > > doesn't work too? > > > > if you need more information, just tell me, it's my first bug report. > > regards > > Wake from power off works on 2.6.24-rc7 for me. Wake from suspend doesn't because Network Manager, HAL, or some other user space tool gets confused. I just rechecked it with Fujitsu Lifebook, which has sky2 (88E8055). There many variations of this chip, and it maybe chip specific problem or ACPI/BIOS issues. If you don't enable Wake on Lan in BIOS, the driver can't do it for you. Also, check how you are shutting down. Also since the device has to restart the PHY, it could be a switch issue if you have some fancy pants switch doing intrusion detection or something, but I doubt that. Is it a clean or fast shutdown, most distributions mark network devices as down on shutdown, but if the distribution does something stupid like remove the driver module, then the driver is unable to setup Wake On Lan. The wake on lan setup is done in one place in the driver, add a printk to see if it is ever called. -- Stephen Hemminger <[EMAIL PROTECTED]> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). On Wed, 9 Jan 2008 13:05:34 -0800 (PST) [EMAIL PROTECTED] wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=9721 > >Summary: wake on lan fails with sky2 module >Product: ACPI >Version: 2.5 > KernelVersion: 2.6.24-rc7 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: normal > Priority: P1 > Component: Power-Sleep-Wake > AssignedTo: [EMAIL PROTECTED] > ReportedBy: [EMAIL PROTECTED] This post-2.6.23 regression was assigned to ACPI but is quite possibly a net driver problem? > > Latest working kernel version: 2.6.23.12 > Earliest failing kernel version: 2.6.24-rc6 (not tested earlier kernel, > 2.6.24-rc7 still failing) > Distribution: Ubuntu 8.04 (but Kernel build from Kernel.org and system > modifiet > to make wake on lan work, i.e. network cards are not shutted down on poweroff) > Hardware Environment: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit > Ethernet Controller (rev 20) onboard Asus P5W DH motherboard, uses module SKY2 > Software Environment: > Problem Description: > > When enabling wake on lan with: 'ethtool -s eth0 wol' i get the following > status: > > 21:56:29 ~ # sudo ethtool eth0 > Settings for eth0: > Supported ports: [ TP ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: Twisted Pair > PHYAD: 0 > Transceiver: internal > Auto-negotiation: on > Supports Wake-on: pg > Wake-on: g< wol enabled > Current message level: 0x00ff (255) > Link detected: yes > > but after shutting down the pc doesn't wake up when magic packet is sent. > > the status lights of the network card are still on (so the card seems to be > online). > > same system with only changed kernel to 2.6.23.12 and same procedure like > above: wake on lan works. > > Steps to reproduce: enable wol on your network card using SKY2 module and it > doesn't work too? > > if you need more information, just tell me, it's my first bug report. > regards > > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > --- You are receiving this mail because: --- > You are on the CC list for the bug, or are watching someone who is. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
