Re: [PATCH] net: fec: fix runtime PM when probing MII bus
From: Andrew Lunn Date: Tue, 21 Jul 2015 01:52:24 +0200 > You emailed saying you had reverted 6c3e921b18ed, but it is still in > net-next/master. It's reverted in the 'net' tree, and that's where bug fixes go. 'net' is periodically merged into 'net-next' so even if the revert isn't there now, it should show up there eventually. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] net: fec: fix runtime PM when probing MII bus
On Mon, Jul 20, 2015 at 03:48:14PM +0200, Lucas Stach wrote: > In the case where there is no "mdio" bus specified in the devicetree a plain > mdiobus_register() will be called, which tries to probe the connected PHY > by doing mdio_read() on the bus. > Since 6c3e921b18ed (net: fec: Ensure clocks are enabled while using mdio bus) > this needs runtime PM to be available, but as RPM is only later set up in the > FEC probe function those calls will fail, which in turn prevents the FEC > driver to be registered successfully. > > Fix this by moving the RPM setup calls before the MII bus probing. > > Also move autosuspend init calls before runtime_pm_enable() so that the RPM > callbacks aren't invoked several times during the probe function. > > Signed-off-by: Lucas Stach > --- > The offending commit got in with v4.2-rc3, so this should be applied as > a fix for 4.2. Hi David You emailed saying you had reverted 6c3e921b18ed, but it is still in net-next/master. If you are not going to revert it, please apply this patch. I've tested it on my platform as well and it works for me. If you still plan to revert 6c3e921b18ed, then i will squash this patch into mine and resubmit. Thanks Andrew > --- > drivers/net/ethernet/freescale/fec_main.c | 9 + > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/ethernet/freescale/fec_main.c > b/drivers/net/ethernet/freescale/fec_main.c > index 42e20e5385ac..349365d85b92 100644 > --- a/drivers/net/ethernet/freescale/fec_main.c > +++ b/drivers/net/ethernet/freescale/fec_main.c > @@ -3431,6 +3431,11 @@ fec_probe(struct platform_device *pdev) > fep->reg_phy = NULL; > } > > + pm_runtime_set_autosuspend_delay(&pdev->dev, FEC_MDIO_PM_TIMEOUT); > + pm_runtime_use_autosuspend(&pdev->dev); > + pm_runtime_set_active(&pdev->dev); > + pm_runtime_enable(&pdev->dev); > + > fec_reset_phy(pdev); > > if (fep->bufdesc_ex) > @@ -3465,8 +3470,6 @@ fec_probe(struct platform_device *pdev) > netif_carrier_off(ndev); > fec_enet_clk_enable(ndev, false); > pinctrl_pm_select_sleep_state(&pdev->dev); > - pm_runtime_set_active(&pdev->dev); > - pm_runtime_enable(&pdev->dev); > > ret = register_netdev(ndev); > if (ret) > @@ -3481,8 +3484,6 @@ fec_probe(struct platform_device *pdev) > fep->rx_copybreak = COPYBREAK_DEFAULT; > INIT_WORK(&fep->tx_timeout_work, fec_enet_timeout_work); > > - pm_runtime_set_autosuspend_delay(&pdev->dev, FEC_MDIO_PM_TIMEOUT); > - pm_runtime_use_autosuspend(&pdev->dev); > pm_runtime_mark_last_busy(&pdev->dev); > pm_runtime_put_autosuspend(&pdev->dev); > > -- > 2.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] net: fec: fix runtime PM when probing MII bus
Am Montag, den 20.07.2015, 15:59 +0200 schrieb Andrew Lunn: > On Mon, Jul 20, 2015 at 03:48:14PM +0200, Lucas Stach wrote: > > In the case where there is no "mdio" bus specified in the devicetree a plain > > mdiobus_register() will be called, which tries to probe the connected PHY > > by doing mdio_read() on the bus. > > Since 6c3e921b18ed (net: fec: Ensure clocks are enabled while using mdio > > bus) > > this needs runtime PM to be available, but as RPM is only later set up in > > the > > FEC probe function those calls will fail, which in turn prevents the FEC > > driver to be registered successfully. > > > > Fix this by moving the RPM setup calls before the MII bus probing. > > > > Also move autosuspend init calls before runtime_pm_enable() so that the RPM > > callbacks aren't invoked several times during the probe function. > > > > Signed-off-by: Lucas Stach > > --- > > The offending commit got in with v4.2-rc3, so this should be applied as > > a fix for 4.2. > > Hi Lucas > > The patch adding runtime PM has been reverted by David. > > Are you O.K. if i fold you fix into my patch and resubmit. I will add > your Signed-off-by. > Oh, I had missed that. Thanks for the hint. I'm ok with folding this patch into yours. Please mention that this fixes the regression seen on i.MX6 witch caused the revert of the original patch. Regards, Lucas -- Pengutronix e.K. | Lucas Stach | Industrial Linux Solutions | http://www.pengutronix.de/ | -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] net: fec: fix runtime PM when probing MII bus
On Mon, Jul 20, 2015 at 03:48:14PM +0200, Lucas Stach wrote: > In the case where there is no "mdio" bus specified in the devicetree a plain > mdiobus_register() will be called, which tries to probe the connected PHY > by doing mdio_read() on the bus. > Since 6c3e921b18ed (net: fec: Ensure clocks are enabled while using mdio bus) > this needs runtime PM to be available, but as RPM is only later set up in the > FEC probe function those calls will fail, which in turn prevents the FEC > driver to be registered successfully. > > Fix this by moving the RPM setup calls before the MII bus probing. > > Also move autosuspend init calls before runtime_pm_enable() so that the RPM > callbacks aren't invoked several times during the probe function. > > Signed-off-by: Lucas Stach > --- > The offending commit got in with v4.2-rc3, so this should be applied as > a fix for 4.2. Hi Lucas The patch adding runtime PM has been reverted by David. Are you O.K. if i fold you fix into my patch and resubmit. I will add your Signed-off-by. Thanks Andrew -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] net: fec: fix runtime PM when probing MII bus
In the case where there is no "mdio" bus specified in the devicetree a plain mdiobus_register() will be called, which tries to probe the connected PHY by doing mdio_read() on the bus. Since 6c3e921b18ed (net: fec: Ensure clocks are enabled while using mdio bus) this needs runtime PM to be available, but as RPM is only later set up in the FEC probe function those calls will fail, which in turn prevents the FEC driver to be registered successfully. Fix this by moving the RPM setup calls before the MII bus probing. Also move autosuspend init calls before runtime_pm_enable() so that the RPM callbacks aren't invoked several times during the probe function. Signed-off-by: Lucas Stach --- The offending commit got in with v4.2-rc3, so this should be applied as a fix for 4.2. --- drivers/net/ethernet/freescale/fec_main.c | 9 + 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 42e20e5385ac..349365d85b92 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3431,6 +3431,11 @@ fec_probe(struct platform_device *pdev) fep->reg_phy = NULL; } + pm_runtime_set_autosuspend_delay(&pdev->dev, FEC_MDIO_PM_TIMEOUT); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + fec_reset_phy(pdev); if (fep->bufdesc_ex) @@ -3465,8 +3470,6 @@ fec_probe(struct platform_device *pdev) netif_carrier_off(ndev); fec_enet_clk_enable(ndev, false); pinctrl_pm_select_sleep_state(&pdev->dev); - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); ret = register_netdev(ndev); if (ret) @@ -3481,8 +3484,6 @@ fec_probe(struct platform_device *pdev) fep->rx_copybreak = COPYBREAK_DEFAULT; INIT_WORK(&fep->tx_timeout_work, fec_enet_timeout_work); - pm_runtime_set_autosuspend_delay(&pdev->dev, FEC_MDIO_PM_TIMEOUT); - pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html