Re: [PATCH v3 2/4] Documentation: Bindings: Add STM32 DWMAC glue
Hi Rob, 2016-03-02 19:33 GMT+01:00 Rob Herring : > On Fri, Feb 26, 2016 at 11:51:50AM +0100, Alexandre TORGUE wrote: >> Signed-off-by: Alexandre TORGUE >> >> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt >> b/Documentation/devicetree/bindings/net/stm32-dwmac.txt >> new file mode 100644 >> index 000..67fceda >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt >> @@ -0,0 +1,40 @@ >> +STMicroelectronics STM32 / MCU DWMAC glue layer controller >> + >> +This file documents platform glue layer for stmmac. >> +Please see stmmac.txt for the other unchanged properties. >> + >> +The device node has following properties. >> + >> +Required properties: >> +- compatible: Should be "st,stm32-dwmac" to select glue, and >> +"snps,dwmac-3.50a" to select IP vesrion. >> +- clocks: Should contain the GMAC main clock, and tx clock >> +- compatible: Should be "st,stm32-dwmac" to select glue and >> +"snps,dwmac-3.50a" to select IP version. >> +- clocks: Should contain the MAC main clock >> +- clock-names: Should contain the clock names "stmmaceth". >> +- st,syscon : Should be phandle/offset pair. The phandle to the syscon node >> which >> + encompases the glue register, and the offset of the control >> register. >> + >> +Optional properties: >> +- clocks: Could contain: >> + - the tx clock, >> + - the rx clock >> +- clock-names: Could contain the clock names "tx-clk", "rx-clk" > > Either the IP block has 3 clocks or it has 1. If you have a case where 1 > clock feeds all 3 inputs, then list the clock 3 times. I agree. I will move rx/tx clock to required properties and then send a v4. Regards. Alexandre > > Rob
Re: [PATCH v3 2/4] Documentation: Bindings: Add STM32 DWMAC glue
On Fri, Feb 26, 2016 at 11:51:50AM +0100, Alexandre TORGUE wrote: > Signed-off-by: Alexandre TORGUE > > diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt > b/Documentation/devicetree/bindings/net/stm32-dwmac.txt > new file mode 100644 > index 000..67fceda > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt > @@ -0,0 +1,40 @@ > +STMicroelectronics STM32 / MCU DWMAC glue layer controller > + > +This file documents platform glue layer for stmmac. > +Please see stmmac.txt for the other unchanged properties. > + > +The device node has following properties. > + > +Required properties: > +- compatible: Should be "st,stm32-dwmac" to select glue, and > +"snps,dwmac-3.50a" to select IP vesrion. > +- clocks: Should contain the GMAC main clock, and tx clock > +- compatible: Should be "st,stm32-dwmac" to select glue and > +"snps,dwmac-3.50a" to select IP version. > +- clocks: Should contain the MAC main clock > +- clock-names: Should contain the clock names "stmmaceth". > +- st,syscon : Should be phandle/offset pair. The phandle to the syscon node > which > + encompases the glue register, and the offset of the control > register. > + > +Optional properties: > +- clocks: Could contain: > + - the tx clock, > + - the rx clock > +- clock-names: Could contain the clock names "tx-clk", "rx-clk" Either the IP block has 3 clocks or it has 1. If you have a case where 1 clock feeds all 3 inputs, then list the clock 3 times. Rob
Re: [PATCH v3 2/4] Documentation: Bindings: Add STM32 DWMAC glue
Hi Alexandre, On 26 February 2016 at 11:51, Alexandre TORGUE wrote: > Signed-off-by: Alexandre TORGUE > > diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt > b/Documentation/devicetree/bindings/net/stm32-dwmac.txt > new file mode 100644 > index 000..67fceda > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt > @@ -0,0 +1,40 @@ > +STMicroelectronics STM32 / MCU DWMAC glue layer controller > + > +This file documents platform glue layer for stmmac. > +Please see stmmac.txt for the other unchanged properties. > + > +The device node has following properties. > + > +Required properties: > +- compatible: Should be "st,stm32-dwmac" to select glue, and > + "snps,dwmac-3.50a" to select IP vesrion. > +- clocks: Should contain the GMAC main clock, and tx clock > +- compatible: Should be "st,stm32-dwmac" to select glue and > + "snps,dwmac-3.50a" to select IP version. > +- clocks: Should contain the MAC main clock > +- clock-names: Should contain the clock names "stmmaceth". > +- st,syscon : Should be phandle/offset pair. The phandle to the syscon node > which > + encompases the glue register, and the offset of the control > register. > + > +Optional properties: > +- clocks: Could contain: > + - the tx clock, > + - the rx clock > +- clock-names: Could contain the clock names "tx-clk", "rx-clk" > + > +Example: > + > + ethernet0: dwmac@40028000 { > + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; > + status = "disabled"; > + reg = <0x40028000 0x8000>; > + reg-names = "stmmaceth"; > + interrupts = <0 61 0>, <0 62 0>; > + interrupt-names = "macirq", "eth_wake_irq"; > + clock-names = "stmmaceth", "tx-clk", "rx-clk"; > + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; > + st,syscon = <&syscfg 0x4>; > + snps,pbl = <8>; > + snps,mixed-burst; > + dma-ranges; > + }; Looks just like any other dwmac-driver binding so: Acked-by: Joachim Eastwood regards, Joachim Eastwood
[PATCH v3 2/4] Documentation: Bindings: Add STM32 DWMAC glue
Signed-off-by: Alexandre TORGUE diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt new file mode 100644 index 000..67fceda --- /dev/null +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt @@ -0,0 +1,40 @@ +STMicroelectronics STM32 / MCU DWMAC glue layer controller + +This file documents platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +The device node has following properties. + +Required properties: +- compatible: Should be "st,stm32-dwmac" to select glue, and + "snps,dwmac-3.50a" to select IP vesrion. +- clocks: Should contain the GMAC main clock, and tx clock +- compatible: Should be "st,stm32-dwmac" to select glue and + "snps,dwmac-3.50a" to select IP version. +- clocks: Should contain the MAC main clock +- clock-names: Should contain the clock names "stmmaceth". +- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which + encompases the glue register, and the offset of the control register. + +Optional properties: +- clocks: Could contain: + - the tx clock, + - the rx clock +- clock-names: Could contain the clock names "tx-clk", "rx-clk" + +Example: + + ethernet0: dwmac@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + status = "disabled"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <0 61 0>, <0 62 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", "tx-clk", "rx-clk"; + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + dma-ranges; + }; -- 1.9.1