RE: oops in current -git
try latest -mm, latest ACPI patch, or try CONFIG_ACPI_BATTERY=n -Len - To unsubscribe from this list: send the line unsubscribe netdev in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: oops in current -git
This happen to me with FC4 and 2.6.17-1.2141_FC4. I have eth0=e100, eth1=8139too and wlan0=hostap_pci. When ACPI is enabled, all works. If acpi=off it hangs for a minute (at stage: Bringing up interface eth1: Determinig IP information for eth1...SIOCSIFFLAGS: Device of recource busy) and then recovers but only eth0 works. But when I put 'acpi=off noapic nolapic' all works again. Strange Linux version 2.6.17-1.2141_FC4 ([EMAIL PROTECTED]) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Fri Jun 30 14:53:04 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000ca000 - 000ce000 (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 1fff (usable) BIOS-e820: 1fff - 1fff8000 (ACPI data) BIOS-e820: 1fff8000 - 2000 (ACPI NVS) BIOS-e820: fff0 - 0001 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000fb6b0 Using x86 segment limits to approximate NX protection On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126960 pages, LIFO batch:31 DMI 2.3 present. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: INTELProduct ID: I845 APIC at: 0xFEE0 Processor #0 15:1 APIC version 20 I/O APIC #2 Version 32 at 0xFEC0. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 3000 (gap: 2000:dff0) Built 1 zonelists Kernel command line: ro root=LABEL=/ vga=771 acpi=off mapped APIC to d000 (fee0) mapped IOAPIC to c000 (fec0) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c077d000 soft=c077e000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1594.361 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514048k/524224k available (1977k kernel code, 9552k reserved, 1358k data, 212k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3193.59 BogoMIPS (lpj=6387188) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 3febfbff CPU: After vendor identify, caps: 3febfbff CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: After all inits, caps: 3febf3ff 0080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02 Checking 'hlt' instruction... OK. ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking if image is initramfs... it is Freeing initrd memory: 1070k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdab1, last bus=2 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0400-043f claimed by ICH4 GPIO Boot video device is :01:00.0 PCI: Transparent bridge - :00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2440] at :00:1f.0 PCI-APIC IRQ transform: :00:1f.2[D] - IRQ 185 PCI-APIC IRQ transform: :00:1f.3[B] - IRQ 177 PCI-APIC IRQ transform: :00:1f.4[C] - IRQ 201 PCI-APIC IRQ transform: :00:1f.5[B] - IRQ 177 PCI-APIC IRQ transform: :01:00.0[A] - IRQ 169 PCI-APIC IRQ transform: :02:08.0[A] - IRQ 193 PCI: Bridge: :00:01.0 IO window: 9000-9fff MEM window: dfd0-dfdf PREFETCH window: d7a0-dfaf PCI: Bridge: :00:1e.0 IO window: a000-afff MEM window: dfe0-dfef PREFETCH window: dfb0-dfbf PCI: Setting latency timer of device :00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 8192 (order: 5, 163840
oops in current -git
I see a reproducible oops in the current -git. It occurs on an Fedora Core 5 box w/ 2.6.18-rc1-git (HEAD e2b209509ca33743864846aef2e1b2afc21f7915). The topmost information scrolls off the screen, so I don't know if its an oops or a BUG. What I do see: * FC5 boot proceeds normally, mounting local filesystems etc., until it reaches the step where it determines the network address for eth0 (8139too). * oops process shown as ipcalc * complete call trace: ip_generic_getfrag, udp_sendmsg, neigh_lookup, sock_sendmsg, find_get_page, autoremove_wake_function, __handle_mm_fault, sys_sendto, do_page_fault, sys_connect * This only occurs when I specify 'acpi=off'. If ACPI is enabled, the box boots and networks happily. Kernel .config is attached. I can't post dmesg or lspci for this machine publicly. It's a modern Intel EM64T class machine. Jeff # # Automatically generated make config: don't edit # Linux kernel version: 2.6.18-rc1 # Mon Jul 10 10:23:00 2006 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE= CONFIG_UID16=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Block layer # # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=anticipatory # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set # CONFIG_MK8 is not set CONFIG_MPSC=y # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_X86_HT=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_SMP=y CONFIG_SCHED_SMT=y # CONFIG_SCHED_MC is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_NR_CPUS=4 # CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_X86_MCE_AMD is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x20 CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_REORDER=y CONFIG_K8_NB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y CONFIG_GENERIC_PENDING_IRQ=y # # Power management options # CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_AC=m # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=m # CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set
