Hi,
At the 802.1 TSN meeting this morning, Lou Berger made a presentation on behalf
of Rob Wilton summarising the recent changes in this draft. I like the changes
to the structure which are intended to align the VLAN tag structure to that
specified in 802.1Q. I notice that the draft retains clause 2.2
(Extensibility) but I think that's a bug, because it's not reflected in the
model (which is a fixed structure of one or two tags).
Right now, it says that the Ethertypes are taken from dot1q-tag-type. Would
this allow tags other than 802.1QTagType (81-00) and 802.1QSTagType (88-A8)?
That shouldn't be allowed.
My preference would be to remove the forward-looking statement quoted here
because it implies a willingness to extend to 3 tags:
The structure of the model is currently limited to matching or
rewriting a maximum of two 802.1Q tags in the frame header but has
been designed to be easily extensible to matching/rewriting three or
more VLAN tags in future, if required.
It looks like you could parse an untagged frame as either :(untagged) or
:(dot1q-vlan-tagged) (without either of the optional tags). Is that a bug?
Thanks,
-- John
-----Original Message-----
From: List HELP only <hdk.1-oeyo8...@hjkeen.net> On Behalf Of Robert Wilton
Sent: 05 November 2018 16:16
To: stds-802-...@listserv.ieee.org
Subject: [802.1 - 12909] IETF Sub-interface VLAN YANG Data Models -
draft-ietf-netmod-sub-intf-vlan-model-04
Ballot due Nov. 6: P802.1Qcx/D0.4
For particulars see
https://1.ieee802.org/active-ballots/
802.1 list help: https://1.ieee802.org/email-lists/
List archives (access-controlled) by date:
www.ieee802.org/1/private/email2/mail1.html
-----
Dear esteemed 802.1 WG members,
A few years back, at the start of my IETF and IEEE standards journey I wrote a
draft defining a sub-interface based VLAN termination YANG model. After
discussion and presentations in both IETF NETMOD WG and IEEE 802.1 WG, there
was a general agreement that it would be acceptable for IETF to publish this
YANG model as an informational RFC, with the acknowledgement that 802.1Q VLAN
technology is owned by IEEE, and in future the IEEE 802.1 WG may choose to
publish a VLAN termination model.
As part of that IETF NETMOD WG process, and after IEEE 802.1 WG had reviewed
the model, I made a small change in structure of the YANG model with the sole
aim of making the model simpler to use. In particular, the older model required
a slightly clunky indexed list of VLAN tags, and that is replaced with a
simpler structure supporting two explicit named VLAN tags ('outer-tag' and
'second-tag'). A while back, Glenn requested that I pass these changes by the
IEEE 802.1 WG to ensure that the changes are acceptable to the IEEE 802.1 WG,
hence this email.
The change is perhaps best illustrated via the following change in the YANG
tree output.
The*older format* of the YANG model (that members of the 802.1Q WG previously
saw) was like this:
*if-cmn:encaps-type: +--:(vlan) +--rw vlan +--rw tags +--rw tag* [index]
+--rw index uint8 +--rw dot1q-tag +--rw tag-type dot1q-tag-type +--rw
vlan-id dot1q-vlan-id*
The *updated format *of YANG model in the current draft is like this:
+--:(dot1q-vlan)
+--rw dot1q-vlan
+--rw outer-tag!
| +--rw tag-type dot1q-tag-type
| +--rw vlan-id ieee:vlanid
+--rw second-tag!
+--rw tag-type dot1q-tag-type
+--rw vlan-id ieee:vlanid
The same equivalent change has been made for L2 sub-interfaces as well.
The latest internet draft is
https://tools.ietf.org/html/draft-ietf-netmod-sub-intf-vlan-model-04
In particular, it may also be useful to look at the instance data
examples in chapter 7, that give a couple of examples of how the YANG
model is expected to be used both for L3 termination, and also when used
in conjunction with the IETF L2VPN YANG model to provision a
point-to-point L2 service.
I hope to submit this draft to the NETMOD WG chairs for WG last call
after the current IETF 103 meeting. So if anyone has any concerns then
please may I ask that you raise them. ideally I would like to get them
informally addressed before this document progresses. Alternatively if
you need more time to review this change, or need this as a formal
liaison then please let me know, and I'll do my best.
Thank you for your time,
Rob Wilton
===
Unsubscribe link: mailto:stds-802-1-l-signoff-requ...@listserv.ieee.org
IEEE. Fostering technological innovation and excellence for the benefit of
humanity.
_______________________________________________
netmod mailing list
netmod@ietf.org
https://www.ietf.org/mailman/listinfo/netmod
