[Nouveau] [PATCH 1/2] disp: activate dual link TMDS links only when possible
From: Hauke MehrtensWithout this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actual possible. Signed-off-by: Hauke Mehrtens Signed-off-by: Ilia Mirkin --- drm/nouveau/nv50_display.c | 8 drm/nouveau/nvkm/engine/disp/gf119.c | 2 +- drm/nouveau/nvkm/engine/disp/nv50.c | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drm/nouveau/nv50_display.c b/drm/nouveau/nv50_display.c index c053c50..93bcfdf 100644 --- a/drm/nouveau/nv50_display.c +++ b/drm/nouveau/nv50_display.c @@ -1961,10 +1961,10 @@ nv50_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *umode, switch (nv_encoder->dcb->type) { case DCB_OUTPUT_TMDS: if (nv_encoder->dcb->sorconf.link & 1) { - if (mode->clock < 165000) - proto = 0x1; - else - proto = 0x5; + proto = 0x1; + if (mode->clock >= 165000 && + nv_encoder->dcb->duallink_possible) + proto |= 0x4; } else { proto = 0x2; } diff --git a/drm/nouveau/nvkm/engine/disp/gf119.c b/drm/nouveau/nvkm/engine/disp/gf119.c index 186fd3a..8691b68 100644 --- a/drm/nouveau/nvkm/engine/disp/gf119.c +++ b/drm/nouveau/nvkm/engine/disp/gf119.c @@ -158,7 +158,7 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 pclk, u32 *conf) switch (outp->info.type) { case DCB_OUTPUT_TMDS: *conf = (ctrl & 0x0f00) >> 8; - if (pclk >= 165000) + if (pclk >= 165000 && outp->info.duallink_possible) *conf |= 0x0100; break; case DCB_OUTPUT_LVDS: diff --git a/drm/nouveau/nvkm/engine/disp/nv50.c b/drm/nouveau/nvkm/engine/disp/nv50.c index 32e73a9..ceecd0e 100644 --- a/drm/nouveau/nvkm/engine/disp/nv50.c +++ b/drm/nouveau/nvkm/engine/disp/nv50.c @@ -391,7 +391,7 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 pclk, u32 *conf) switch (outp->info.type) { case DCB_OUTPUT_TMDS: *conf = (ctrl & 0x0f00) >> 8; - if (pclk >= 165000) + if (pclk >= 165000 && outp->info.duallink_possible) *conf |= 0x0100; break; case DCB_OUTPUT_LVDS: -- 2.4.10 ___ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau
Re: [Nouveau] [PATCH 1/2] disp: activate dual link TMDS links only when possible
On Tue, Nov 3, 2015 at 7:02 PM, Ben Skeggswrote: > On 11/04/2015 08:41 AM, Ilia Mirkin wrote: >> From: Hauke Mehrtens >> >> Without this patch a pixel clock rate above 165 MHz on a TMDS link is >> assumed to be dual link. This is true for DVI, but not for HDMI. HDMI >> supports no dual link, but it supports pixel clock rates above 165 MHz. >> Only activate Dual Link mode when it is actual possible. >> >> Signed-off-by: Hauke Mehrtens >> Signed-off-by: Ilia Mirkin >> --- >> drm/nouveau/nv50_display.c | 8 >> drm/nouveau/nvkm/engine/disp/gf119.c | 2 +- >> drm/nouveau/nvkm/engine/disp/nv50.c | 2 +- >> 3 files changed, 6 insertions(+), 6 deletions(-) >> >> diff --git a/drm/nouveau/nv50_display.c b/drm/nouveau/nv50_display.c >> index c053c50..93bcfdf 100644 >> --- a/drm/nouveau/nv50_display.c >> +++ b/drm/nouveau/nv50_display.c >> @@ -1961,10 +1961,10 @@ nv50_sor_mode_set(struct drm_encoder *encoder, >> struct drm_display_mode *umode, >> switch (nv_encoder->dcb->type) { >> case DCB_OUTPUT_TMDS: >> if (nv_encoder->dcb->sorconf.link & 1) { >> - if (mode->clock < 165000) >> - proto = 0x1; >> - else >> - proto = 0x5; >> + proto = 0x1; >> + if (mode->clock >= 165000 && >> + nv_encoder->dcb->duallink_possible) >> + proto |= 0x4; > This is a somewhat flaky condition, given that one could plug a > single-link HDMI monitor into a duallink-capable TMDS connector. > > Still, it's an improvement :) Yeah, FWIW I thought of that (for the second patch too). All this stuff is pretty fragile. But... what are you gonna do. Is there some other way of telling whether we're on HDMI or DVI? > >> } else { >> proto = 0x2; >> } >> diff --git a/drm/nouveau/nvkm/engine/disp/gf119.c >> b/drm/nouveau/nvkm/engine/disp/gf119.c >> index 186fd3a..8691b68 100644 >> --- a/drm/nouveau/nvkm/engine/disp/gf119.c >> +++ b/drm/nouveau/nvkm/engine/disp/gf119.c >> @@ -158,7 +158,7 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, >> u32 pclk, u32 *conf) >> switch (outp->info.type) { >> case DCB_OUTPUT_TMDS: >> *conf = (ctrl & 0x0f00) >> 8; >> - if (pclk >= 165000) >> + if (pclk >= 165000 && outp->info.duallink_possible) >> *conf |= 0x0100; > I think it might be more robust to key this off the SOR protocol, rather > than duplicating the condition above. You mean disp->sor.lvdsconf? What do I do with that? Or did you have something else in mind? > >> break; >> case DCB_OUTPUT_LVDS: >> diff --git a/drm/nouveau/nvkm/engine/disp/nv50.c >> b/drm/nouveau/nvkm/engine/disp/nv50.c >> index 32e73a9..ceecd0e 100644 >> --- a/drm/nouveau/nvkm/engine/disp/nv50.c >> +++ b/drm/nouveau/nvkm/engine/disp/nv50.c >> @@ -391,7 +391,7 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, >> u32 pclk, u32 *conf) >> switch (outp->info.type) { >> case DCB_OUTPUT_TMDS: >> *conf = (ctrl & 0x0f00) >> 8; >> - if (pclk >= 165000) >> + if (pclk >= 165000 && outp->info.duallink_possible) >> *conf |= 0x0100; > Same here. > >> break; >> case DCB_OUTPUT_LVDS: >> > ___ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau
Re: [Nouveau] [PATCH 1/2] disp: activate dual link TMDS links only when possible
On 11/04/2015 10:37 AM, Ilia Mirkin wrote: > On Tue, Nov 3, 2015 at 7:02 PM, Ben Skeggswrote: >> On 11/04/2015 08:41 AM, Ilia Mirkin wrote: >>> From: Hauke Mehrtens >>> >>> Without this patch a pixel clock rate above 165 MHz on a TMDS link is >>> assumed to be dual link. This is true for DVI, but not for HDMI. HDMI >>> supports no dual link, but it supports pixel clock rates above 165 MHz. >>> Only activate Dual Link mode when it is actual possible. >>> >>> Signed-off-by: Hauke Mehrtens >>> Signed-off-by: Ilia Mirkin >>> --- >>> drm/nouveau/nv50_display.c | 8 >>> drm/nouveau/nvkm/engine/disp/gf119.c | 2 +- >>> drm/nouveau/nvkm/engine/disp/nv50.c | 2 +- >>> 3 files changed, 6 insertions(+), 6 deletions(-) >>> >>> diff --git a/drm/nouveau/nv50_display.c b/drm/nouveau/nv50_display.c >>> index c053c50..93bcfdf 100644 >>> --- a/drm/nouveau/nv50_display.c >>> +++ b/drm/nouveau/nv50_display.c >>> @@ -1961,10 +1961,10 @@ nv50_sor_mode_set(struct drm_encoder *encoder, >>> struct drm_display_mode *umode, >>> switch (nv_encoder->dcb->type) { >>> case DCB_OUTPUT_TMDS: >>> if (nv_encoder->dcb->sorconf.link & 1) { >>> - if (mode->clock < 165000) >>> - proto = 0x1; >>> - else >>> - proto = 0x5; >>> + proto = 0x1; >>> + if (mode->clock >= 165000 && >>> + nv_encoder->dcb->duallink_possible) >>> + proto |= 0x4; >> This is a somewhat flaky condition, given that one could plug a >> single-link HDMI monitor into a duallink-capable TMDS connector. >> >> Still, it's an improvement :) > > Yeah, FWIW I thought of that (for the second patch too). All this > stuff is pretty fragile. But... what are you gonna do. Is there some > other way of telling whether we're on HDMI or DVI? drm_detect_hdmi_monitor() should do the trick :) > >> >>> } else { >>> proto = 0x2; >>> } >>> diff --git a/drm/nouveau/nvkm/engine/disp/gf119.c >>> b/drm/nouveau/nvkm/engine/disp/gf119.c >>> index 186fd3a..8691b68 100644 >>> --- a/drm/nouveau/nvkm/engine/disp/gf119.c >>> +++ b/drm/nouveau/nvkm/engine/disp/gf119.c >>> @@ -158,7 +158,7 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, >>> u32 pclk, u32 *conf) >>> switch (outp->info.type) { >>> case DCB_OUTPUT_TMDS: >>> *conf = (ctrl & 0x0f00) >> 8; >>> - if (pclk >= 165000) >>> + if (pclk >= 165000 && outp->info.duallink_possible) >>> *conf |= 0x0100; >> I think it might be more robust to key this off the SOR protocol, rather >> than duplicating the condition above. > > You mean disp->sor.lvdsconf? What do I do with that? Or did you have > something else in mind? No, not that. The "proto" field you're setting set "5" in the previous hunk when dual-link is requested is actually NV907D_SOR_SET_CONTROL_PROTOCOL_DUAL_TMDS - which is what is parsed here with (ctrl & 0x0f00). So, instead of "if (pclk >= 165000)" here, you should just be able to do "(*conf == 5)". I have no idea why the BIOS tables identify the dual-link data with 0x0105 instead of 0x0005, when "5" already indicates DUAL_TMDS - but anyway. > >> >>> break; >>> case DCB_OUTPUT_LVDS: >>> diff --git a/drm/nouveau/nvkm/engine/disp/nv50.c >>> b/drm/nouveau/nvkm/engine/disp/nv50.c >>> index 32e73a9..ceecd0e 100644 >>> --- a/drm/nouveau/nvkm/engine/disp/nv50.c >>> +++ b/drm/nouveau/nvkm/engine/disp/nv50.c >>> @@ -391,7 +391,7 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, >>> u32 pclk, u32 *conf) >>> switch (outp->info.type) { >>> case DCB_OUTPUT_TMDS: >>> *conf = (ctrl & 0x0f00) >> 8; >>> - if (pclk >= 165000) >>> + if (pclk >= 165000 && outp->info.duallink_possible) >>> *conf |= 0x0100; >> Same here. >> >>> break; >>> case DCB_OUTPUT_LVDS: >>> >> signature.asc Description: OpenPGP digital signature ___ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau
Re: [Nouveau] [PATCH 1/2] disp: activate dual link TMDS links only when possible
On 11/04/2015 08:41 AM, Ilia Mirkin wrote: > From: Hauke Mehrtens> > Without this patch a pixel clock rate above 165 MHz on a TMDS link is > assumed to be dual link. This is true for DVI, but not for HDMI. HDMI > supports no dual link, but it supports pixel clock rates above 165 MHz. > Only activate Dual Link mode when it is actual possible. > > Signed-off-by: Hauke Mehrtens > Signed-off-by: Ilia Mirkin > --- > drm/nouveau/nv50_display.c | 8 > drm/nouveau/nvkm/engine/disp/gf119.c | 2 +- > drm/nouveau/nvkm/engine/disp/nv50.c | 2 +- > 3 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/drm/nouveau/nv50_display.c b/drm/nouveau/nv50_display.c > index c053c50..93bcfdf 100644 > --- a/drm/nouveau/nv50_display.c > +++ b/drm/nouveau/nv50_display.c > @@ -1961,10 +1961,10 @@ nv50_sor_mode_set(struct drm_encoder *encoder, struct > drm_display_mode *umode, > switch (nv_encoder->dcb->type) { > case DCB_OUTPUT_TMDS: > if (nv_encoder->dcb->sorconf.link & 1) { > - if (mode->clock < 165000) > - proto = 0x1; > - else > - proto = 0x5; > + proto = 0x1; > + if (mode->clock >= 165000 && > + nv_encoder->dcb->duallink_possible) > + proto |= 0x4; This is a somewhat flaky condition, given that one could plug a single-link HDMI monitor into a duallink-capable TMDS connector. Still, it's an improvement :) > } else { > proto = 0x2; > } > diff --git a/drm/nouveau/nvkm/engine/disp/gf119.c > b/drm/nouveau/nvkm/engine/disp/gf119.c > index 186fd3a..8691b68 100644 > --- a/drm/nouveau/nvkm/engine/disp/gf119.c > +++ b/drm/nouveau/nvkm/engine/disp/gf119.c > @@ -158,7 +158,7 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 > pclk, u32 *conf) > switch (outp->info.type) { > case DCB_OUTPUT_TMDS: > *conf = (ctrl & 0x0f00) >> 8; > - if (pclk >= 165000) > + if (pclk >= 165000 && outp->info.duallink_possible) > *conf |= 0x0100; I think it might be more robust to key this off the SOR protocol, rather than duplicating the condition above. > break; > case DCB_OUTPUT_LVDS: > diff --git a/drm/nouveau/nvkm/engine/disp/nv50.c > b/drm/nouveau/nvkm/engine/disp/nv50.c > index 32e73a9..ceecd0e 100644 > --- a/drm/nouveau/nvkm/engine/disp/nv50.c > +++ b/drm/nouveau/nvkm/engine/disp/nv50.c > @@ -391,7 +391,7 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 > pclk, u32 *conf) > switch (outp->info.type) { > case DCB_OUTPUT_TMDS: > *conf = (ctrl & 0x0f00) >> 8; > - if (pclk >= 165000) > + if (pclk >= 165000 && outp->info.duallink_possible) > *conf |= 0x0100; Same here. > break; > case DCB_OUTPUT_LVDS: > signature.asc Description: OpenPGP digital signature ___ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau