[nox-dev] NOX Pronto 3290(2011.08.06)
Hi, AllI'd like to know that it iscompatible between NOX(zaku or destiny) and Pronto 3290(2011.08.06 firmware).Currently, I can not operate Simplerouting etc.I don't know exactly why nox is having a below message.If you have any solution, please let me know.00175|routeinstaller|DBG:Install flow entry port0007:vlan:pcp:0 mac84:2b:2b:60:26:6e-84:2b:2b:60:38:03 proto0800 ip192.168.10.11-192.168.10.10 port8-0 with 1 actions00176|openflow-event|ERR:received Openflow error packet from dpid=02aa: type=3, code=0, 80 bytes of data00177|openflow-event|ERR:received Openflow error packet from dpid=02aa: type=3, code=0, 80 bytes of data Best Regards, Min-Hyup KANG ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
Re: [nox-dev] NOX Pronto 3290(2011.08.06)
I don't know much about Pronto, but this error is a message from the switch telling NOX that it couldn't add a flow entry because the flow table was full. Could that be the case indeed? 2011/9/19 Min-Hyup KANG kang-min-h...@hanmail.net Hi, All I'd like to know that it is compatible between NOX(zaku or destiny) and Pronto 3290(2011.08.06 firmware). Currently, I can not operate Simplerouting etc. I don't know exactly why nox is having a below message. If you have any solution, please let me know. 00175|routeinstaller|DBG:Install flow entry port0007:vlan:pcp:0 mac84:2b:2b:60:26:6e-84:2b:2b:60:38:03 proto0800 ip192.168.10.11-192.168.10.10 port8-0 with 1 actions 00176|openflow-event|ERR:received Openflow error packet from dpid=02aa: type=3, code=0, 80 bytes of data 00177|openflow-event|ERR:received Openflow error packet from dpid=02aa: type=3, code=0, 80 bytes of data Best Regards, Min-Hyup KANG kang-min-h...@hanmail.net ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
Re: [nox-dev] NOX Pronto 3290(2011.08.06)
I'm not aware of any incompatibility between NOX and this particular switch, though I am not one of the most likely to know about such problems. However, OpenFlow error type 3 code 0 indicates that the flow table is full... maybe your table is just full? -- Murphy On Sep 18, 2011, at 5:51 PM, Min-Hyup KANG wrote: Hi, All I'd like to know that it is compatible between NOX(zaku or destiny) and Pronto 3290(2011.08.06 firmware). Currently, I can not operate Simplerouting etc. I don't know exactly why nox is having a below message. If you have any solution, please let me know. 00175|routeinstaller|DBG:Install flow entry port0007:vlan:pcp:0 mac84:2b:2b:60:26:6e-84:2b:2b:60:38:03 proto0800 ip192.168.10.11-192.168.10.10 port8-0 with 1 actions 00176|openflow-event|ERR:received Openflow error packet from dpid=02aa: type=3, code=0, 80 bytes of data 00177|openflow-event|ERR:received Openflow error packet from dpid=02aa: type=3, code=0, 80 bytes of data Best Regards, Min-Hyup KANG ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
Re: [nox-dev] NOX Pronto 3290(2011.08.06)
yes, you are right,it is error that it couldn't add a flow entry because the flow table was full.it is very strange..Now, I checked flow table information through switch CLI.Is this switch error ?CLI# flowtableFlow table showERROR: Status nil, operation did not complete.Error handing command flowtable. No flow table entries returnedCLI#- 원본 메일 -보낸사람: Kyriakos Zarifis kyr.zari...@gmail.com받는사람 : Min-Hyup KANG kang-min-h...@hanmail.net참조 : NOX-dev nox-dev@noxrepo.org,openflow-indigo openflow-ind...@lists.stanford.edu날짜: 2011년 9월 19일 월요일, 10시 01분 29초 +0900제목: Re: [nox-dev] NOX Pronto 3290(2011.08.06) I don't know much about Pronto, but this error is a message from the switch telling NOX that it couldn't add a flow entry because the flow table was full. Could that be the case indeed? 2011/9/19 Min-Hyup KANG kang-min-h...@hanmail.net Hi, AllI'd like to know that it iscompatible between NOX(zaku or destiny) and Pronto 3290(2011.08.06 firmware). Currently, I can not operate Simplerouting etc. I don't know exactly why nox is having a below message.If you have any solution, please let me know. 00175|routeinstaller|DBG:Install flow entry port0007:vlan:pcp:0 mac84:2b:2b:60:26:6e-84:2b:2b:60:38:03 proto0800 ip192.168.10.11-192.168.10.10 port8-0 with 1 actions 00176|openflow-event|ERR:received Openflow error packet from dpid=02aa: type=3, code=0, 80 bytes of data 00177|openflow-event|ERR:received Openflow error packet from dpid=02aa: type=3, code=0, 80 bytes of data Best Regards, Min-Hyup KANG ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev Best Regards, Min-Hyup KANG ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev