[ns] request for source codes of LDBAL algorithm

2011-03-01 Thread Shivakumar Jiddi








hello,if anybody ha the source code of ns2 implementation of TBMGA protocol or 
LDAB algorithm.please send me



  


[ns] ANYCAST SIMULATION IN NS-2

2011-03-01 Thread Petro Rugambwa

Hi  all,

 I am a new user for NS-2  trying to implement anycast simulation in
NS-2.29.3 BUT  I don't know where to start and how?
Does this NS version support  the anycast simulation? is there any code
needed code to be added  into NS?
Is there any example that I can follow to see how anycast simulation is
implemented in NS-2.

Thank you in advance for the help.

Petro


[ns] period time of routing table advertisement in DSDV

2011-03-01 Thread Hosseini Nezhad

Hi

How I can change the period time of Send routing table information
(routing table advertisement) of each node in DSDV routing algorithm?



-- 
Regards;
Hosseini Nazhad.



[ns] [ns2] problem in binding tcl and c++

2011-03-01 Thread tellajeera sushma

hi,

 I want to implement a Host Identity protocol using ns2. I will be grateful
if u give some help. I just want environment of 2 nodes with duplex link
between them, such that one node should send response/request type of packet
on receipt of  request/response type of packet respectively. Waiting for the
answer. Please do reply.

thank you,
sushma.


[ns] Cancel a packet transmission at MAC Layer and send the packet to the Routing Layer

2011-03-01 Thread David Rodenas

Hi all

Sometimes, I have to cancel a packet transmission at MAC layer and in this 
case, 
I want to send the packet to the routing layer again and store it in a queue to 
sending it later. I've been trying to make that at mcps_data_request method of 
p802_15_4mac.cc, just at the moment when the node should switch on the TX. The 
poblem is that my code isn't correct (I really don't know what to do) and I 
have 
an segmentation fault. Hence, I'd like to know how to implement this. 

Thanks a lot 
 David



  


[ns] 'undefined' protocol in trace file

2011-03-01 Thread abdusy syarif

Dear All,

I have a problem after adding my protocol to NS-2.34. My problem is
similar to this
(http://mailman.isi.edu/pipermail/ns-users/2005-February/047138.html).
After I run simulation with my protocol, I’ve got “undefined” in my
trace file as follows:

f -t 100.617533225 -Hs 9 -Hd 0 -Ni 9 -Nx 216.96 -Ny 129.62 -Nz 0.00
-Ne -1.00 -Nl RTR -Nw — -Ma 0 -Md 0 -Ms 0 -Mt 0 -Is 12582914.255
-Id -1.255 -It undefined -Il 44 -If 0 -Ii 1949 -Iv 4
s -t 100.617708225 -Hs 9 -Hd 0 -Ni 9 -Nx 216.96 -Ny 129.62 -Nz 0.00
-Ne -1.00 -Nl MAC -Nw — -Ma 0 -Md  -Ms 5 -Mt 800 -Is
12582914.255 -Id -1.255 -It undefined -Il 102 -If 0 -Ii 1949 -Iv 4
r -t 100.618524510 -Hs 5 -Hd 0 -Ni 5 -Nx 300.00 -Ny 150.00 -Nz 0.00
-Ne -1.00 -Nl MAC -Nw — -Ma 0 -Md  -Ms 5 -Mt 800 -Is
12582914.255 -Id -1.255 -It undefined -Il 44 -If 0 -Ii 1949 -Iv 4

Would you mind to give me some clue due to my problem? Thanks in advance.

BR,

Abdusy Syarif



[ns] Deadline is extended to April 1, 2011! CFP: WICON 2011 (Octorber 19-21, 2011, Xi'An, China)

2011-03-01 Thread Qinghe Du



CFP: WICON 2011 (Submission Due: April 1, 2011)
Please accept our apologies if you receive multiple copies of this CFP


WICON 2011
 The 6th International ICST Wireless Internet Conference
 October 19 - 21, 2011, Xi’an, China
  http://www.wicon.org/2011
   Submission deadline: April 1, 2011

Sponsored by ICST
Technically co-sponsored by CREATE-NET
In technical cooperation with Xi’an Jiaotong University, China

CALL FOR PAPERS




SCOPE OF CONFERENCE


The 6th International ICST Wireless Internet Conference (WICON 2011) brings
together technical experts and researchers from academia, industry, and
government all around the world to discuss novel research results related to
the future Wireless Internet.



TOPICS


The Wireless Internet Conference (WICON) will continue to serve as a premier
international forum to discuss novel research results related to the
emerging Wireless Internet. WICON 2011 is soliciting both academic research
and industry practice papers. Papers solicited in the WICON 2011 are divided
into FOUR tracks, PHY, MAC, Network and Service/Application tracks, and span
a wide range of areas of interest including but not limited to:

1. Seamless Integration of Heterogeneous Networks
* Convergence and interworking of heterogeneous wireless networks
* Vertical handoff and seamless roaming
* Mobile P2P networking, systems, and applications
* Next generation Internet services and applications

2. Cross�\layer Design and Optimization
* Clean�\slate wireless Internet architecture
* Interaction among PHY/MAC, routing, and congestion control
* PHY�\aware wireless scheduling
* QoS provisioning over Multimedia wireless networks

3. Wireless Access Technologies
* Multiple access technology (OFDMA, CDMA, and TDMA)
* WLANs, WiMAX, satellite, 3G and Beyond
* QoS management and traffic modeling
* Algorithm design and performance analysis

4. Multi�\hop Wireless Networks
* Wireless sensor networks
* Mobile ad hoc networks
* Wireless mesh networks
* Cooperative and relay networks

5. Emerging Technologies and Applications
* IMT2000, UMTS, LTE, IMT�\Advanced networks
* Vehicular ad hoc networks (VANET)
* Cognitive radio networks
* Bio�\inspired networks
* Context�\aware mobile networking
* Wireless body area networks (WBANs)
* Tele�\medicine/e�\health networks

6. Network Security
* Architectural support for security
* Security, privacy, and dependability issues
* Security in cooperative networks

7. Wireless Internet Platforms and Software
* Testbeds and simulation tools
* Middleware, operating system, and programming languages
* Experimental measurements

8. Green Communications
* Green wireless network architectures and communication protocols
* Green applications by wireless communications and mobile computing
technologies
* Energy�\efficient mobile and wireless networks
* Network planning and optimization for green wireless networking


+
ORGANIZING COMMITTEE
+

General Chair:
Pinyi Ren, Xi’an Jiaotong University, China


Technical Program Co-Chairs:
Xin Liu, University of California, Davis, USA
Pei Liu, Polytechnic Institute of New York University, USA
Song Ci, University of Nebraska-Lincoln, USA

Steering Committee:
Imrich Chlamtac (Chair), Create-Net, Italy
Xudong Wang, TeraNovi Technologies Inc., USA
Hsiao-Hwa Chen, National Cheng Kung University, Taiwain
Mahmoud Daneshmand, ATT Labs, USA



PUBLICATION


Accepted papers will be published in the IEEE (pending) International
Conference Proceedings Series and will be made available in IEEE Digital
Library (pending), as well as submitted to be indexed by EI. (The
Proceedings of WICON 2010 have been index by EI).



IMPORTANT DATES


Paper submission deadline: 1 April 2011
Notification deadline: 15 May 2011
Camera�\ready submission deadline: 1 July 2011
Registration deadline: 1 July 2011


SUBMISSIONS

Please visit the conference website (http://www.wicon.org/2011) for detailed
instructions.



SPECIAL ISSUES

Selected papers will be published on a special issue of ACM/Springer MOBILE
NETWORKS AND APPLICATIONS (MONET) journal. The special issues for selected
WICON 2011 papers on other international journals are under application.



[ns] Need Guidence]

2011-03-01 Thread Saqib Ali




[ns] Creating intruder in ns2

2011-03-01 Thread N.Sudhir Chowdary

Hi i want to create an intruder which is located at source and moves
along the packet path and reaches the source. Can any one help me
Thank you

-- 
NSC



[ns] hybrid network

2011-03-01 Thread asif iqbal

Dear users,
Can any one help me to integrate WiMAX and the MANET? In fact I want to 
simulate 
a scenario where a subset of mobile nodes in MANET has internet connections 
through their WiMAX interface, these nodes are called gateways. Rest of  the 
nodes just use the gateways to access the internet. Please tell me  how to 
provide both WiMAX and MANET interface to the Gateways.

Asif   


  


[ns] Problem in start ontime ftp application in DSDV protocol

2011-03-01 Thread Hosseini Nezhad

Hi
Please run the script file(this is Wireless senario).

Could you tel me, why the data packet's send start at (about) 50th Second?

I have set it to start at 10th second.($ns at 10 $ftp start).
I have used DSDV routing protocol, and I think the routing table in
all 3 nodes are created until 3 second(Right?). So, why the packet
sending late until 50th second?

-- 
Regards;
Hosseini Nazhad.


[ns] Quick newbie help for setting a multipath

2011-03-01 Thread errored


Hi all, on ns2 I'd like to set up 2 duplex paths between point 1 and point 2. 
Doing this shows up only one link on nam.

$ns duplex-link $n1 $n2 2Mb 5ms DropTail
$ns duplex-link $n1 $n2 2Mb 5ms DropTail

How do I do it? Should have have 2 more routers and route through them?
Thanks!
-- 
View this message in context: 
http://old.nabble.com/Quick-newbie-help-for-setting-a-multipath-tp31028334p31028334.html
Sent from the ns-users mailing list archive at Nabble.com.



[ns] FTBFS: build ns2 with gcc 4.5 error

2011-03-01 Thread YunQiang Su

g++ -c -g -O2 -Wall -Wno-write-strings  -DTCP_DELAY_BIND_ALL -DNO_TK
-DTCLCL_CLASSINSTVAR  -DNDEBUG -DLINUX_TCP_HEADER -DUSE_SHM
-DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_14 -DHAVE_OTCL_H
-DHAVE_LIBTK8_4 -DHAVE_TK_H -DHAVE_LIBTCL8_4 -DHAVE_TCLINT_H
-DHAVE_TCL_H  -DHAVE_CONFIG_H -DNS_DIFFUSION -DSMAC_NO_SYNC
-DCPP_NAMESPACE=std -DUSE_SINGLE_ADDRESS_SPACE -Drng_test  -I. -I.
-I/usr/include -I/usr/include -I/usr/include/tcl8.4
-I/usr/include/tcl8.4/tcl-private/generic
-I/usr/include/tcl8.4/tcl-private/generic -I/usr/include/pcap -I./tcp
-I./sctp -I./common -I./link -I./queue -I./adc -I./apps -I./mac
-I./mobile -I./trace -I./routing -I./tools -I./classifier -I./mcast
-I./diffusion3/lib/main -I./diffusion3/lib -I./diffusion3/lib/nr
-I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs
-I./diffserv -I./satellite -I./wpan -o tools/ranvar.o tools/ranvar.cc
tools/ranvar.cc: In member function 'virtual double
GammaRandomVariable::value()':
tools/ranvar.cc:219:70: error: cannot call constructor
'GammaRandomVariable::GammaRandomVariable' directly
tools/ranvar.cc:219:70: error:   for a function-style cast, remove the
redundant '::GammaRandomVariable'
make[1]: *** [tools/ranvar.o] Error 1
dh_auto_build: make -j1 returned exit code 2
make: *** [build] Error 2


-- 
YunQiang Su