Re: [NTG-context] Feature request: Creating tables from (tab-separated) values
On 4/22/06, Peter Münster wrote:
On Sat, 22 Apr 2006, Mojca Miklavec wrote:
- [with luaTeX in mind] calculating sums of rows columns other
Excel-like calculations references accross tables ;) - well, that
one wasn't meant seriously.
Hello Mojca,
should be possible even without luaTeX:
\input realcalc % can be found on CTAN
Thanks for the pointer! I've never used this one so far.
\def\SumFF{0}
\def\SumEUR{0}
\def\AddEUR#1{\Radd\SumEUR\SumEUR{#1}%
\Rmul\R{#1}{6.55957}\Radd\R\R{0.005}\Rtrunc\R2\R
\Radd\SumFF\SumFF\R \bTR \bTD\eTD \bTD#1\eTD \expanded{\bTD\R\eTD} \eTR}
\def\PrintSums{\bTR \bTD Sums: \eTD
\bTD\Rtrunc\SumEUR2\SumEUR \SumEUR\eTD
\bTD\Rtrunc\SumFF2\SumFF \SumFF \eTD \eTR}
\starttext
\setupTABLE[r][each][align=flushright]
\setupTABLE[r][1][align=middle]
\bTABLE
\bTR \bTH\eTH \bTH Euro \eTH \bTH FF \eTH \eTR
\AddEUR{1.23}
\AddEUR{2.34}
\AddEUR{45.67}
\PrintSums
\eTABLE
\stoptext
With LaTeX, you can even replace the . by a , :
Stupid me! I forgot about the following trick
\uccode`.=`,
\WORD{3.14}
(It can be surely done without using \WORD, but that was the easiest
way to recall it from another evil example that Hans sent me some time
ago.)
Mojca
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Feature request: Creating tables from (tab-separated) values
Hi,
Here is a quick hack that converts csv to commalist values.
Perhaps it helpful for someone. Documentation blurb:
This module parses CSV data (somewhat) safely. After
\def\dataline{a,,\j,a,a\j a,t{f}ab}
\convertcsvdata\dataline\to \myascii
\message{\meaning\myascii}
output is:
macro:-{a},{},{\j },{a},{a\j a},{t{f}},{,},{},{ab}
The result is detokenized, like would be with \type{\convertargument}.
Therefore, you will need to run \type{\scantokens} over the list
items if the CVS data was actually \TeX{} code.
Cheers,
Taco
t-asciidata.tex
Description: TeX document
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Feature request: Creating tables from (tab-separated) values
Hello,
This idea described below was partially inspired by gnuplot
contemptations, but mainly because writing tables with both LaTeX
ConTeXt is too complex in most cases.
Natural tables are great since they offer anough flexibility to do
just about anything with tables, but many tables are still simple m
values in n rows and for those it's an annoying task to write those
\NCs, \eTR\bTRs, ... even if it's just a matter of writing a
script to transform the values to a suitable form.
Christopher Creutzig has sent an interesting solution to the mailing
list some time ago (see
http://wiki.contextgarden.net/TABLE#Creating_tables_from_CSV_data_.28Comma_Separated_Values.29)
and since then I've been thinking about a similar, slightly more
powerful solution which could make table-typesetiting easier.
I don't have enough skills to implement it, but here are some
properties listed that such a solution should have. In case anyone
finds this little project doable ... It would solve quite some
headaches.
- [very important] a possibility to define own macros, so that it
would be easy to print any type of tables (natural tables, TaBlEs, ...
or whatever form that could possibly come to someone's mind); for
example \def\MyDef#1#2{\bTR\bTD#1\eTD\bTD#2\eTD\eTR}; the machinery
behind would only have to feed these macros properly according
- [important] possible to separate the data with different characters:
tab, comma, multiple spaces, ampersand (), ...
- [very useful] a possibility to read the data from a block
(\start...\stop...) or from a file; it would be handly to be able to
use the same data file for making a plot and for printing the data
into a table
- [useful] possibility to ignore lines starting with '#' (optional;
usually these are comments)
- [not crucial] if comma (,) is separating the data, a possibility to escape it
- [useful] a possibility to select which rows (columns) to print (for
example rows 1-3,8-last or even, ...)
- [optional, but still useful] replacing decimal points with commas
- [optional] if the table was supposed to have 4 colums and only 2 are
available, ignore/fill with empty arguments (don't panic with
unnecessary errors)
- [with luaTeX in mind] calculating sums of rows columns other
Excel-like calculations references accross tables ;) - well, that
one wasn't meant seriously.
Thanks a lot,
Mojca
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Feature request: Creating tables from (tab-separated) values
On Sat, 22 Apr 2006, Mojca Miklavec wrote:
- [with luaTeX in mind] calculating sums of rows columns other
Excel-like calculations references accross tables ;) - well, that
one wasn't meant seriously.
Hello Mojca,
should be possible even without luaTeX:
\input realcalc % can be found on CTAN
\def\SumFF{0}
\def\SumEUR{0}
\def\AddEUR#1{\Radd\SumEUR\SumEUR{#1}%
\Rmul\R{#1}{6.55957}\Radd\R\R{0.005}\Rtrunc\R2\R
\Radd\SumFF\SumFF\R \bTR \bTD\eTD \bTD#1\eTD \expanded{\bTD\R\eTD} \eTR}
\def\PrintSums{\bTR \bTD Sums: \eTD
\bTD\Rtrunc\SumEUR2\SumEUR \SumEUR\eTD
\bTD\Rtrunc\SumFF2\SumFF \SumFF \eTD \eTR}
\starttext
\setupTABLE[r][each][align=flushright]
\setupTABLE[r][1][align=middle]
\bTABLE
\bTR \bTH\eTH \bTH Euro \eTH \bTH FF \eTH \eTR
\AddEUR{1.23}
\AddEUR{2.34}
\AddEUR{45.67}
\PrintSums
\eTABLE
\stoptext
With LaTeX, you can even replace the . by a , :
\documentclass{article}
\usepackage{dcolumn}
\input{realcalc}% on CTAN
\newcommand*\cc[1]{\multicolumn{1}{c}{#1}}
\def\scanwert\ignorespaces#1\unskip{\gdef\WERT{#1}#1}
\begin{document}
\begin{tabular}{{\scanwert}D{.}{,}{-1}%
{\Rmul\res\WERT{6.55957}\Radd\res\res{0.005}\Rtrunc\res2\res\res}%
D{.}{,}{-1}}%
\cc{Euro} \cc{FF}\\\hline
20.33 \\
20.3 \\
20 \\
14.46
\end{tabular}
\end{document}
Cheers, Peter
--
http://pmrb.free.fr/contact/
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
