Re: [NTG-context] KOMA-srcartcl Type Area: How to count header and footer to text area?
Am Dienstag, den 13.12.2011, 08:24 -0500 schrieb Aditya Mahajan: > On Dec 13, 2011, at 6:33 AM, Paul Menzel > wrote: > > having heard nice things about the KOMA script type area I wanted to use > > it too and tried out the example in the Wiki [1]. > > > >% Set binding correction value (mode=BCOR turns it on). > >\doifmodeelse{BCOR}{\def\bindingcorr{3mm}}{\def\bindingcorr{0pt}} > > > >% Set visible page width. > >\newdimen\PageWidth > >\PageWidth=\dimexpr(\paperwidth-\bindingcorr) > > > >% Determine the paper aspect ratio. > > > > \edef\Ratio{\withoutpt{\the\dimexpr(2\paperheight/(\PageWidth/32768))}} > > > >% Set the textarea width to 2.6 alphabets. > >\setbox\scratchbox\hbox{\dorecurse{26}{\character\recurselevel}} > >\newdimen\Width \Width=\dimexpr(2.6\wd\scratchbox) > > > >% Set the textarea height proportional to the width. > >\newdimen\Height \Height=\dimexpr(\Ratio\Width) > > > >% Set the margin/gutter widths to be equal on a full spread. > >\newdimen\Back > >\doifmodeelse{oneside} > >{\Back=\dimexpr(((\PageWidth - \Width) / 2) + \bindingcorr)} > >{\Back=\dimexpr(((\PageWidth - \Width) / 3) + \bindingcorr)} > > > >% Set the top and bottom margins in a 1:2 ratio, ignoring headers. > >\edef\Top{\the\dimexpr((\paperheight - \Height) / 3 - 3\lineheight)} > > > >% Redefine \Height to include header and footer space. > >\Height=\dimexpr(\Height + 8\lineheight) > > > >% Set up the page layout using the calculated parameters. > >\setuplayout[ > > backspace=\the\Back, > > height=\the\Height, > > width=\the\Width, > > header=2\lineheight, > > headerdistance=\lineheight, > > footer=2\lineheight, > > footerdistance=3\lineheight, > > topspace=\Top] > > > >\starttext > >\framed[width=\textwidth,height=\textheight]{} > >\stoptext > > > > I only want to add a page number to the footer [3] and I do not want to > > use any header [2, and ConTeXt manual]. Therefore I set > > > >\setupheader[][state=none] > >\setuppagenumbering[alternative=doublesided, location={footer}] > >\enablemode[BCOR] > > > > According to the KOMA-Script manual [4] having just a page number in the > > footer it should be counted as belonging to the margin. The only way I > > found out to achieve that was setting `\footdistance=0`. > > > > Is that the “correct” way to comply with the KOMA-Script type area > > recommendation? > > > > Please find the adapted example attached. > Have you seen http://modules.contextgarden.net/typearea Yes I did. But it does not seem to provide all options like `headinclude` or `footinclude`. At least \usemodule[typearea] \setupTypeArea[bcor=0mm, headinclude=false, footinclude=false] did not change anything. Thanks, Paul > > [1] http://wiki.contextgarden.net/KOMA-scrartcl_Type_Area > > [2] http://wiki.contextgarden.net/Layout > > [3] http://wiki.contextgarden.net/Reference/en/setuppagenumbering > > [4] ftp://ftp.dante.de/pub/tex/macros/latex/.../koma-script/scrguide.pdf signature.asc Description: This is a digitally signed message part ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] KOMA-srcartcl Type Area: How to count header and footer to text area?
Have you seen http://modules.contextgarden.net/typearea Aditya On Dec 13, 2011, at 6:33 AM, Paul Menzel wrote: > Dear ConTeXt folks, > > > having heard nice things about the KOMA script type area I wanted to use > it too and tried out the example in the Wiki [1]. > >% Set binding correction value (mode=BCOR turns it on). >\doifmodeelse{BCOR}{\def\bindingcorr{3mm}}{\def\bindingcorr{0pt}} > >% Set visible page width. >\newdimen\PageWidth >\PageWidth=\dimexpr(\paperwidth-\bindingcorr) > >% Determine the paper aspect ratio. >\edef\Ratio{\withoutpt{\the\dimexpr(2\paperheight/(\PageWidth/32768))}} > >% Set the textarea width to 2.6 alphabets. >\setbox\scratchbox\hbox{\dorecurse{26}{\character\recurselevel}} >\newdimen\Width \Width=\dimexpr(2.6\wd\scratchbox) > >% Set the textarea height proportional to the width. >\newdimen\Height \Height=\dimexpr(\Ratio\Width) > >% Set the margin/gutter widths to be equal on a full spread. >\newdimen\Back >\doifmodeelse{oneside} >{\Back=\dimexpr(((\PageWidth - \Width) / 2) + \bindingcorr)} >{\Back=\dimexpr(((\PageWidth - \Width) / 3) + \bindingcorr)} > >% Set the top and bottom margins in a 1:2 ratio, ignoring headers. >\edef\Top{\the\dimexpr((\paperheight - \Height) / 3 - 3\lineheight)} > >% Redefine \Height to include header and footer space. >\Height=\dimexpr(\Height + 8\lineheight) > >% Set up the page layout using the calculated parameters. >\setuplayout[ > backspace=\the\Back, > height=\the\Height, > width=\the\Width, > header=2\lineheight, > headerdistance=\lineheight, > footer=2\lineheight, > footerdistance=3\lineheight, > topspace=\Top] > >\starttext >\framed[width=\textwidth,height=\textheight]{} >\stoptext > > I only want to add a page number to the footer [3] and I do not want to > use any header [2, and ConTeXt manual]. Therefore I set > >\setupheader[][state=none] >\setuppagenumbering[alternative=doublesided, location={footer}] >\enablemode[BCOR] > > According to the KOMA-Script manual [4] having just a page number in the > footer it should be counted as belonging to the margin. The only way I > found out to achieve that was setting `\footdistance=0`. > > Is that the “correct” way to comply with the KOMA-Script type area > recommendation? > > Please find the adapted example attached. > > > Thanks, > > Paul > > > [1] http://wiki.contextgarden.net/KOMA-scrartcl_Type_Area > [2] http://wiki.contextgarden.net/Layout > [3] http://wiki.contextgarden.net/Reference/en/setuppagenumbering > [4] ftp://ftp.dante.de/pub/tex/macros/latex/.../koma-script/scrguide.pdf > > > ___ > If your question is of interest to others as well, please add an entry to the > Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] KOMA-srcartcl Type Area: How to count header and footer to text area?
Dear ConTeXt folks, having heard nice things about the KOMA script type area I wanted to use it too and tried out the example in the Wiki [1]. % Set binding correction value (mode=BCOR turns it on). \doifmodeelse{BCOR}{\def\bindingcorr{3mm}}{\def\bindingcorr{0pt}} % Set visible page width. \newdimen\PageWidth \PageWidth=\dimexpr(\paperwidth-\bindingcorr) % Determine the paper aspect ratio. \edef\Ratio{\withoutpt{\the\dimexpr(2\paperheight/(\PageWidth/32768))}} % Set the textarea width to 2.6 alphabets. \setbox\scratchbox\hbox{\dorecurse{26}{\character\recurselevel}} \newdimen\Width \Width=\dimexpr(2.6\wd\scratchbox) % Set the textarea height proportional to the width. \newdimen\Height \Height=\dimexpr(\Ratio\Width) % Set the margin/gutter widths to be equal on a full spread. \newdimen\Back \doifmodeelse{oneside} {\Back=\dimexpr(((\PageWidth - \Width) / 2) + \bindingcorr)} {\Back=\dimexpr(((\PageWidth - \Width) / 3) + \bindingcorr)} % Set the top and bottom margins in a 1:2 ratio, ignoring headers. \edef\Top{\the\dimexpr((\paperheight - \Height) / 3 - 3\lineheight)} % Redefine \Height to include header and footer space. \Height=\dimexpr(\Height + 8\lineheight) % Set up the page layout using the calculated parameters. \setuplayout[ backspace=\the\Back, height=\the\Height, width=\the\Width, header=2\lineheight, headerdistance=\lineheight, footer=2\lineheight, footerdistance=3\lineheight, topspace=\Top] \starttext \framed[width=\textwidth,height=\textheight]{} \stoptext I only want to add a page number to the footer [3] and I do not want to use any header [2, and ConTeXt manual]. Therefore I set \setupheader[][state=none] \setuppagenumbering[alternative=doublesided, location={footer}] \enablemode[BCOR] According to the KOMA-Script manual [4] having just a page number in the footer it should be counted as belonging to the margin. The only way I found out to achieve that was setting `\footdistance=0`. Is that the “correct” way to comply with the KOMA-Script type area recommendation? Please find the adapted example attached. Thanks, Paul [1] http://wiki.contextgarden.net/KOMA-scrartcl_Type_Area [2] http://wiki.contextgarden.net/Layout [3] http://wiki.contextgarden.net/Reference/en/setuppagenumbering [4] ftp://ftp.dante.de/pub/tex/macros/latex/.../koma-script/scrguide.pdf koma.pdf Description: Adobe PDF document % Set binding correction value (mode=BCOR turns it on). \doifmodeelse{BCOR}{\def\bindingcorr{5mm}}{\def\bindingcorr{0pt}} % Set visible page width. \newdimen\PageWidth \PageWidth=\dimexpr(\paperwidth-\bindingcorr) % Determine the paper aspect ratio. \edef\Ratio{\withoutpt{\the\dimexpr(2\paperheight/(\PageWidth/32768))}} % Set the textarea width to 2.6 alphabets. \setbox\scratchbox\hbox{\dorecurse{26}{\character\recurselevel}} \newdimen\Width \Width=\dimexpr(2.6\wd\scratchbox) % Set the textarea height proportional to the width. \newdimen\Height \Height=\dimexpr(\Ratio\Width) % Set the margin/gutter widths to be equal on a full spread. \newdimen\Back \doifmodeelse{oneside} {\Back=\dimexpr(((\PageWidth - \Width) / 2) + \bindingcorr)} {\Back=\dimexpr(((\PageWidth - \Width) / 3) + \bindingcorr)} % Set the top and bottom margins in a 1:2 ratio, ignoring headers. \edef\Top{\the\dimexpr((\paperheight - \Height) / 3 - 3\lineheight)} % Redefine \Height to include header and footer space. \Height=\dimexpr(\Height + 8\lineheight) % Set up the page layout using the calculated parameters. \setuplayout[ backspace=\the\Back, height=\the\Height, width=\the\Width, header=2\lineheight, headerdistance=\lineheight, footer=2\lineheight, footerdistance=0\lineheight, topspace=\Top, ] \setupheader[][state=none] \setuppagenumbering[alternative=doublesided, location={footer}] \enablemode[BCOR] \starttext \framed[width=\textwidth,height=\textheight]{} \input tufte \stoptext signature.asc Description: This is a digitally signed message part ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___