[NTG-context] Re: page setup
Hallo Hans, sorry for bringing back two old topics, but they are still unanswered: 1) Willy Egger firstly pointed on empty page with zero on the bottom-left coner of an additional sheet using arranging command. I have tested with pretty new context (ConTeXt ver: 2004.3.16) and this behevior still survived. Run the next test file and see page 2: %-- \setuppapersize[A5,landscape][A4] \setuparranging[2TOPSIDE] \starttext \switchtobodyfont[20pt] \dorecurse{2}{Page \recurselevel\page} \stoptext % 2) It is possible to sort in reverse order? It means the result of next test file was: C B A. % - \definesorting[address][addressbook] \setupsorting[address][criterium=all] \address{A} \address{C} \address{B} \placelistofaddressbook %- Thank you for answers Vit Zyka ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Re: page setup
Hi Willi (and others), thanx for detailed explanation and testing. Procesing the minimal example by suggested way I received an improvement: I can see the contents. But stil there is en error with number of pages. It means, that new ConTeXt has an improvement in this direction. This solution would be enough for me since I have written macro that add empty pages the total number be mod 4=0 when the problem of empty sheet does not occure. But unfortunately, Win Acrobat Reader 6, 5.1 and 5.0 CE says about my complex document: There was an error procesing page. There was a problem reading the document (14). if I run texexec ONLY ONCE after the change. After two passing the Reader does not complain. So I will have to try a new version... Vit - Original Message - From: "Willi Egger" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, February 03, 2004 1:33 AM Subject: Re: [NTG-context] Re: page setup > Hi Vit > > When using arranging one needs either to use the option --arranging > together with texexec and therefore no \setuparranging in the file or > put \setuparranging in the file and run it first with the > \setuparranging command commented. This will result in a jobname.tuo > file, which is used in a further run with the \setuparranging line > uncommented. - With this method the problem is, that when running the > file through texexec with the \setuparranging command uncommented for > all runs you end up with an inappropriate jobname.tuo file. That is the > reason why you do not get the table of contents. > > When compiling your sample code with first the commented \setuparranging > command and a final run with this line uncommented I get here: > > 2 sheets, first page with table of contents, the sections one and three, > then follows a whole empty page (A4) with the mentioned 0 (zero)at the > bottom left, the last page contains the the section two. > > See also attachment. > > Kind regards Willi > > Vit Zyka wrote: > >>>>\setuppapersize[A5][A4,landscape] > >>>>\setuparranging[2SIDE] > >> > >>With [2SIDE], I don't get an empty page. I do get an extra page with a > >>0 down at the lower left corner. And this is annoying. > > > > > > Yes, I have the same observation. The "0" in left bottom corner of > > additional (and unwanted) sheet. > > > > Perhaps it is corrected in the new beta (my ConTeXt is a half year old), but > > a) I am travelling foreign country with limited time and Internet access, > > b) I am using rather complex macro for traveller electronic journal and > > switching to new beta means complex testing if everything will work OK. > > > > Please, can anybody with new ConTeXt check, how many pages are produced by > > next code? And if the table of contents is present? > > > > Thanks > > Vit Zyka > > > > (Hint: I got 3 pages (not expected 2) without table of content. Table of > > content is relaxed by using command \setuparranging.) > > > > Code: > > --- > > \setuppapersize[A5,landscape][A4] > > \setuparranging[2TOPSIDE] > > > > \starttext > > Content: \placecontent > > \switchtobodyfont[20pt] > > \dorecurse{3}{\section{Section \recurselevel}Page \recurselevel\page} > > \stoptext ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Re: page setup
Hi Vit When using arranging one needs either to use the option --arranging together with texexec and therefore no \setuparranging in the file or put \setuparranging in the file and run it first with the \setuparranging command commented. This will result in a jobname.tuo file, which is used in a further run with the \setuparranging line uncommented. - With this method the problem is, that when running the file through texexec with the \setuparranging command uncommented for all runs you end up with an inappropriate jobname.tuo file. That is the reason why you do not get the table of contents. When compiling your sample code with first the commented \setuparranging command and a final run with this line uncommented I get here: 2 sheets, first page with table of contents, the sections one and three, then follows a whole empty page (A4) with the mentioned 0 (zero)at the bottom left, the last page contains the the section two. See also attachment. Kind regards Willi Vit Zyka wrote: \setuppapersize[A5][A4,landscape] \setuparranging[2SIDE] With [2SIDE], I don't get an empty page. I do get an extra page with a 0 down at the lower left corner. And this is annoying. Yes, I have the same observation. The "0" in left bottom corner of additional (and unwanted) sheet. Perhaps it is corrected in the new beta (my ConTeXt is a half year old), but a) I am travelling foreign country with limited time and Internet access, b) I am using rather complex macro for traveller electronic journal and switching to new beta means complex testing if everything will work OK. Please, can anybody with new ConTeXt check, how many pages are produced by next code? And if the table of contents is present? Thanks Vit Zyka (Hint: I got 3 pages (not expected 2) without table of content. Table of content is relaxed by using command \setuparranging.) Code: --- \setuppapersize[A5,landscape][A4] \setuparranging[2TOPSIDE] \starttext Content: \placecontent \switchtobodyfont[20pt] \dorecurse{3}{\section{Section \recurselevel}Page \recurselevel\page} \stoptext --- ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context VitZyka.pdf Description: Adobe PDF document
Re: [NTG-context] Re: page setup
> >> \setuppapersize[A5][A4,landscape] > >> \setuparranging[2SIDE] > > With [2SIDE], I don't get an empty page. I do get an extra page with a > 0 down at the lower left corner. And this is annoying. Yes, I have the same observation. The "0" in left bottom corner of additional (and unwanted) sheet. Perhaps it is corrected in the new beta (my ConTeXt is a half year old), but a) I am travelling foreign country with limited time and Internet access, b) I am using rather complex macro for traveller electronic journal and switching to new beta means complex testing if everything will work OK. Please, can anybody with new ConTeXt check, how many pages are produced by next code? And if the table of contents is present? Thanks Vit Zyka (Hint: I got 3 pages (not expected 2) without table of content. Table of content is relaxed by using command \setuparranging.) Code: --- \setuppapersize[A5,landscape][A4] \setuparranging[2TOPSIDE] \starttext Content: \placecontent \switchtobodyfont[20pt] \dorecurse{3}{\section{Section \recurselevel}Page \recurselevel\page} \stoptext --- ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Re: page setup
Hi, >> I still wonder why there is an empty page... This is slightly annoying. >> >>> \setuppapersize[A5][A4,landscape] >>> \setuparranging[2SIDE] > > With [2SIDE], I don't get an empty page. I do get an extra page with a > 0 down at the lower left corner. And this is annoying. That is true! I haven't seen the 0 in the corner. Where does it come from? This looks like a bug to me Patrick -- Es wird kein Wunder geschehen ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Re: page setup
On Tuesday, Jan 6, 2004, at 17:20 America/New_York, Patrick Gundlach wrote: I still wonder why there is an empty page... This is slightly annoying. \setuppapersize[A5][A4,landscape] \setuparranging[2SIDE] With [2SIDE], I don't get an empty page. I do get an extra page with a 0 down at the lower left corner. And this is annoying. With [2UP], page one starts on the recto, leaving a blank verso, which is what I would expect. Steve ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Re: page setup
Hi, I still wonder why there is an empty page... This is slightly annoying. > Try this: > -- > \setuppapersize[A5][A4,landscape] > \setuparranging[2SIDE] > \starttext > \showframe > \dorecurse{7}{\input tufte \par} > \stoptext > \endinput > -- Patrick -- Es wird kein Wunder geschehen ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Re: page setup
Hans van der Meer <[EMAIL PROTECTED]> writes: > I am trying to typeset 2 A5 pages onto 1 A4 page in landscape format, Try this: -- \setuppapersize[A5][A4,landscape] \setuparranging[2SIDE] \starttext \showframe \dorecurse{7}{\input tufte \par} \stoptext \endinput -- Patrick -- mon trainsistor j'adore ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context