[OpenIndiana-discuss] Virtualbox 6.1.0 on OI - Test results
hi all, I have installed VBox 6.1 (see thread: "Virtualbox 6.1.0 on OI - almost compiles": https://www.mail-archive.com/search?l=openindiana-discuss@openindiana.org=subject:%22%5C%5BOpenIndiana%5C-discuss%5C%5D+VirtualBox%22=newest=1). Then have started (w/o problems) Win10 guest - before starting changed Video driver to VMSVGA from VboxSVGA as suggested) But: * Could not install VBoxGuestAdditions at all - it dies (see attachment) * After failure of Guest Additions installation, almost everything freezes and hangs * no way to test seamless or anything else Reverted to working BE/VBox 6.0.14 - then faced another set of problems: * Guest Additions roll-back has failed * Had to remove "\OS DIsk\Program File\Oracle\VirtualBox Guest Additions" directory in order to finish additions installation * Still have performance issues after "recovering". I might need to re-install guest now Maybe I did something wrong, not sure. Also, if that matters, I am using BE with NVIDIA driver from their site (not OI one) for "NVIDIA Corporation GK208B [GeForce GT 730]" card: :; pkginfo -l NVDAgraphicsr PKGINST: NVDAgraphicsr NAME: NVIDIA Graphics System Device Driver CATEGORY: system,graphics ARCH: i386 VERSION: 440.31,REV=2019.10.27.02.19 BASEDIR: / VENDOR: NVIDIA Corporation DESC: Kernel Drivers for NVIDIA Quadro graphics INSTDATE: Nov 11 2019 12:35 HOTLINE: Please contact your local service provider STATUS: completely installed FILES:9 installed pathnames 3 directories 97937 blocks used (approx) Card: :; scanpci | grep -i nvidia NVIDIA Corporation GK208B [GeForce GT 730] NVIDIA Corporation GK208 HDMI/DP Audio Controller So, in my case, it is far away from successful upgrade. With best regards. Predrag Zečević -- Predrag Zečević Technical Support Analyst 2e Systems GmbH tel: +49 - 6196 - 95058 - 15 mob: +49 - 174 - 3109288 fax: +49 - 6196 - 95058 - 94 e-mail: predrag.zece...@2e-systems.com headquarter: 2e Systems GmbH, Koenigsteiner Str. 87, 65812 Bad Soden am Taunus, Germany registration: Amtsgericht Koenigstein (Germany), HRB 7303 managing director: Phil Douglas http://www.2e-systems.com/ - Making your business fly! Stopped logging into separate file Zielverzeichnis: C:\Program Files\Oracle\VirtualBox Guest Additions Version: 6.1.0 (Rev 135406) Previous version: 6.0.14 (Rev 133895) Detected OS: Windows 10 (64-bit) System Directory: C:\WINDOWS\system32 Checking for installation requirements for Vista / Windows 7 / Windows 8 ... Verifying file "C:\WINDOWS\system32\d3d9.dll" ... Verification of file "C:\WINDOWS\system32\d3d9.dll" failed (not Vendor: Microsoft Corporation, and/or not Architecture: amd64) Verifying file "C:\WINDOWS\system32\msd3d9.dll" ... Skipping to file "C:\WINDOWS\system32\msd3d9.dll"; not found Verifying file "C:\WINDOWS\SysWOW64\msd3d8.dll" ... Skipping to file "C:\WINDOWS\SysWOW64\msd3d8.dll"; not found Verifying file "C:\WINDOWS\SysWOW64\msd3d9.dll" ... Skipping to file "C:\WINDOWS\SysWOW64\msd3d9.dll"; not found Zielverzeichnis: C:\Program Files\Oracle\VirtualBox Guest Additions Wird entpackt: DIFxAPI.dll... 100% Wird entpackt: VBoxDrvInst.exe... 100% Wird entpackt: VBoxVideo.inf... 100% Wird entpackt: VBoxVideo.cat... 100% Wird entpackt: iexplore.ico... 100% Zielverzeichnis: C:\Program Files\Oracle\VirtualBox Guest Additions Stopping VBoxService ... Stopping VBoxService via SCM ... Stopping VBoxService done Stopping VBoxTray ... Stopping VBoxTray done Zielverzeichnis: C:\Program Files\Oracle\VirtualBox Guest Additions Wird entpackt: VBoxVideo.sys... 100% Wird entpackt: VBoxDisp.dll... 100% Wird entpackt: VBoxMouse.sys... 100% Wird entpackt: VBoxMouse.inf... 100% Wird entpackt: VBoxMouse.cat... 100% Wird entpackt: VBoxGuest.sys... 100% Wird entpackt: VBoxGuest.inf... 100% Wird entpackt: VBoxGuest.cat... 100% Wird entpackt: VBoxTray.exe... 100% Wird entpackt: VBoxControl.exe... 100% Wird entpackt: VBoxWHQLFake.exe... 100% Zielverzeichnis: C:\WINDOWS\system32 Wird entpackt: VBoxService.exe... 100% Zielverzeichnis: C:\Program Files\Oracle\VirtualBox Guest Additions Wird entpackt: VBoxWddm.cat... 100% Wird entpackt: VBoxWddm.sys... 100% Wird entpackt: VBoxWddm.inf... 100% Wird entpackt: VBoxDispD3D.dll... 100% Wird entpackt: VBoxNine.dll... 100% Wird entpackt: VBoxSVGA.dll... 100% Wird entpackt: VBoxICD.dll... 100% Wird entpackt: VBoxGL.dll... 100% Wird entpackt: VBoxDispD3D-x86.dll... 100% Wird entpackt: VBoxNine-x86.dll... 100% Wird entpackt: VBoxSVGA-x86.dll... 100% Wird entpackt: VBoxICD-x86.dll... 100% Wird entpackt: VBoxGL-x86.dll... 100% Übersprungen: C:\WINDOWS\system32\drivers\VBoxSF.sys Wird entpackt: C:\Program Files\Oracle\VirtualBox Guest Additions\nst3F25.tmp... 100% Umbenennen nach Neustart: C:\Program Files\Oracle\VirtualBox Guest Additions\nst3F25.tmp->C:\WINDOWS\system32\drivers\VBoxSF.sys Übersprungen: C:\WINDOWS\system32\VBoxMRXNP.dll Wird entpackt:
Re: [OpenIndiana-discuss] Virtualbox 6.1.0 on OI - almost compiles
Hi, VB 6.1.0 Scaled mode works Full screen works Seamless on w10 with VboxSVGA do not work, I've never used it som I dont' know if it has ever worked. - It alwost works, can toggle on/off, windows is coming in theri own window, but Win-menu cannot be opened. Seamless on debian-variant (4.19) and VMSVGA works fine. Both w10 and Kali (the debian variant) was tested with additions first 6.0.4 and then upgraded to 6.1.0. Both w10 and Kali plays "Merry Christmas Mr Bean" from youtube very well I'm sorry I cannot test microphone, it have never even worked in host-OS (hardware-error). -espenM On 12/21/19 4:11 PM, Michal Nowak via openindiana-discuss wrote: > On 12/20/19 03:48 PM, Espen Martinsen wrote: >> >> Success! >> >> >> $pfexec pkg update --be-name OIhipster-20191220 >> reboot >> >> $ uname -a >> SunOS esmpc 5.11 illumos-028b5df8ad i86pc i386 i86pc illumos >> >> $ pkg list -H virtualbox >> system/virtualbox 6.0.14-2019.0.0.0 >> >> $pfexec beadm create -d Testing_VB610 VBtest >> $pfexec beadm activate VBtest >> >> reboot >> >> $pfexec pkg uninstall system/virtualbox >> >> ### putting the .p5p files in /var/userland ### >> >> $pfexec pkg unset-publisher "*" openindiana.org >> $pfexec pkg set-publisher-p/var/userland/virtualbox_6.1_20191219.p5p >> userland >> $pfexec pkg uninstall entire@0.5.11-2018.0.0.0 >> $pfexec pkg uninstall consolidation/userland/userland-incorporation >> $pfexec pkg install virtualbox >> $pfexec pkg list -H virtualbox >> $system/virtualbox (userland) >> 6.1.0-2019.0.0.0 i-- >> >> reboot >> >> Additions from virtualbox.de on win10 guest: Sound Absolutely very >> good! >> (setting HostAudio: PulseAudio, Controller: Intel HD Audio) > > That's great, Espen! Can you also check that Seamless Mode works (if > it worked before)? > > Thanks. > Michal > >> >> >> Great Sound! >> -espenM >> >> >> >> >> >> >> >> On 12/20/19 9:49 AM, Predrag Zecevic - Unix Systems Administrator wrote: >>> On 12/19/19 17:26, Michal Nowak via openindiana-discuss wrote: On 12/19/19 5:03 PM, Predrag Zecevic - Unix Systems Administrator wrote: > On 12/19/19 16:57, Michal Nowak via openindiana-discuss wrote: >> On 12/19/19 10:47 AM, Predrag Zecevic - Unix Systems Administrator >> wrote: >>> On 12/19/19 10:14, Michal Nowak via openindiana-discuss wrote: Hi Predrag, you can find binary packages at ftp://openqa.oi.mnowak.cz/. Install virtualbox_6.1_20191219.p5p on the host and restart. Then install virtualbox-additions_6.1_20191219.p5p to OpenIndiana VirtualBox VM. You can install either package like this: pfexec pkg apply-hot-fix -v /tmp/virtualbox_6.1_20191219.p5p Thanks, Michal >>> >>> Heh, does not work: >>> >>> :; pfexec pkg apply-hot-fix -v >>> /nobackup/Virtualization/VirtualBox/virtualbox_6.1_20191219.p5p >>> Resolved URL to: >>> file:///nobackup/Virtualization/VirtualBox/virtualbox_6.1_20191219.p5p >>> >>> >>> Retrieving installed package list... >>> Scanning package archive... >>> pkg://userland/system/virtualbox not installed, skipping. >>> >>> pkg: None of the packages in this hot-fix are installed. >>> >>> Maybe I have to add something to command line? >>> >>> Thanks and regards >>> >> >> I think that for "apply-hot-fix" to work, VirtualBox (of any >> version) needs to be installed. "apply-hot-fix" then works as >> update mechanism. >> >> Michal > > Hi Michal, > > Yes, I do have it (and actually using every day --one Windows guest, > few Linux, etc...): > > :; pkg list -H virtualbox > system/virtualbox 6.0.14-2019.0.0.0 > i-- > > :; pkg info virtualbox > Name: system/virtualbox > Summary: VirtualBox - general-purpose full virtualizer > Category: System/Virtualization > State: Installed > Publisher: openindiana.org > Version: 6.0.14 > Branch: 2019.0.0.0 > Packaging Date: Thu Oct 31 11:42:39 2019 > Last Install Time: Fri Nov 1 14:32:26 2019 > Size: 118.66 MB > FMRI: > pkg://openindiana.org/system/virtualbox@6.0.14-2019.0.0.0:20191031T114239Z > > > Source URL: > http://download.virtualbox.org/virtualbox/6.0.14/VirtualBox-6.0.14.tar.bz2 > > > Project URL: http://www.virtualbox.org/ > > Regards. I think it does not see the local package as an update because it's from the 'userland' publisher, but the installed system/virtualbox package comes form the official 'openindiana.org' publisher. In a test BE, can you remove
Re: [OpenIndiana-discuss] what auto snapshot is been used
No it running and say it done but still show no snapshot, I've attached a screenshot of the gui which show it ok But when I do zfs list -t snapshot NAME USED AVAIL REFER MOUNTPOINT rpool1/ROOT/openindiana-2019:12:18@install 6.44M - 2.52G - rpool1/ROOT/openindiana-2019:12:18@2019-12-16-17:06:07 13.5M - 2.55G - rpool1/ROOT/openindiana-2019:12:18@2019-12-16-17:45:59 0 - 3.42G - rpool1/ROOT/openindiana-2019:12:18@2019-12-16-17:46:37 0 - 3.42G - rpool1/ROOT/openindiana-2019:12:18@2019-12-18-23:01:52 2.57M - 3.45G - rpool1/ROOT/openindiana-2019:12:18@2019-12-18-23:02:35 717K - 3.45G - rpool1/ROOT/openindiana-2019:12:18/var@install 1.31M - 417M - rpool1/ROOT/openindiana-2019:12:18/var@2019-12-16-17:06:07 412K - 417M - rpool1/ROOT/openindiana-2019:12:18/var@2019-12-16-17:45:59 854K - 895M - rpool1/ROOT/openindiana-2019:12:18/var@2019-12-16-17:46:37 1.37M - 1.00G - rpool1/ROOT/openindiana-2019:12:18/var@2019-12-18-23:01:52 882K - 1.03G - rpool1/ROOT/openindiana-2019:12:18/var@2019-12-18-23:02:35 1.52M - 1.16G - you see there no Tank/virtual/ZFS-SOLUTION that should be the snap of or even job number 1576773585 but as far as napp-it think it running and it ok -Original Message- From: Carl Brunning Sent: 23 December 2019 12:03 To: Discussion list for OpenIndiana Subject: Re: [OpenIndiana-discuss] what auto snapshot is been used Ok am giving that a try will know in the next 30mins if it working One other bug I have in napp-it was I had made a few autosnap job with testing, they been set to manual so not used but when I try to delete them just seem to do nothing and all ways there How to get rid of mistake jobs that not used -Original Message- From: Guenther Alka Sent: 23 December 2019 11:38 To: openindiana-discuss@openindiana.org Subject: Re: [OpenIndiana-discuss] what auto snapshot is been used What does not work? If you use OI text edition 2019.10 napp-it should work out of the box. Lately there was a Perl/gcc problem with an initial setup of OI 19.10 that is fixed in current installer. https://napp-it.org/downloads/openindiana.html If napp-it is running and you can create autosnap jobs, you may need to additionally enable autojob at all ex Jobs > Auto Service > 5min manuals http://www.napp-it.org/doc/downloads/setup_napp-it_os.pdf (chapter 3, OI) https://napp-it.org/doc/downloads/onepagers.pdf gea @napp-it.org Am 23.12.2019 um 12:13 schrieb Carl Brunning: > Thanks for that I've try but it does not work First it took a while to > fix the perl problem that you have when there no gui and for some > reason it say it doing autosnaps But there nothing show when I do zfs > list -t snapshot and there should be a few there but nothing So unless > I can work out what it doing/not doing I need another option > > ZanpZend been a long time since I used so will have a look at the but > that I seem to remember was a more for doing snapshot and sending to > another pool or machine I did not remember it just doing a normal > snapshot and delete after a time > > Anyway I will look at both but hope there another way of doing this > > Thanks > Carl > > -Original Message- > From: Guenther Alka > Sent: 23 December 2019 08:20 > To: openindiana-discuss@openindiana.org > Subject: Re: [OpenIndiana-discuss] what auto snapshot is been used > > You can use my napp-it. > > This is a feature complete webmanagement tool for a OmniOS, OpenIndiana and > Solaris storageserver. Among other it comes with a menu Jobs > Autosnap > where you can set autsnaps with many features like timetable, keep and hold > parameters. > > The free version is ok for whole basic storage management. > Installation is done via a single command (as root in /root) wget -O - > www.napp-it.org/nappit | perl > > Open napp-it via browser at address http://serverip:81 and goto menu > Jobs > Autosnap > Create > > gea > @napp-it.org > > Am 22.12.2019 um 18:23 schrieb Carl Brunning: >> HI question >> am using the latest hipster server so no gui so what people using to >> do auto snapshot >> >> and instruction on how to setup and use as i would like this feature >> for my server >> >> thanks >> Carl >> >> ___ >> openindiana-discuss mailing list >> openindiana-discuss@openindiana.org >> https://openindiana.org/mailman/listinfo/openindiana-discuss > ___ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > https://openindiana.org/mailman/listinfo/openindiana-discuss > ___ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > https://openindiana.org/mailman/listinfo/openindiana-discuss --
Re: [OpenIndiana-discuss] what auto snapshot is been used
Ok am giving that a try will know in the next 30mins if it working One other bug I have in napp-it was I had made a few autosnap job with testing, they been set to manual so not used but when I try to delete them just seem to do nothing and all ways there How to get rid of mistake jobs that not used -Original Message- From: Guenther Alka Sent: 23 December 2019 11:38 To: openindiana-discuss@openindiana.org Subject: Re: [OpenIndiana-discuss] what auto snapshot is been used What does not work? If you use OI text edition 2019.10 napp-it should work out of the box. Lately there was a Perl/gcc problem with an initial setup of OI 19.10 that is fixed in current installer. https://napp-it.org/downloads/openindiana.html If napp-it is running and you can create autosnap jobs, you may need to additionally enable autojob at all ex Jobs > Auto Service > 5min manuals http://www.napp-it.org/doc/downloads/setup_napp-it_os.pdf (chapter 3, OI) https://napp-it.org/doc/downloads/onepagers.pdf gea @napp-it.org Am 23.12.2019 um 12:13 schrieb Carl Brunning: > Thanks for that I've try but it does not work First it took a while to > fix the perl problem that you have when there no gui and for some > reason it say it doing autosnaps But there nothing show when I do zfs > list -t snapshot and there should be a few there but nothing So unless > I can work out what it doing/not doing I need another option > > ZanpZend been a long time since I used so will have a look at the but > that I seem to remember was a more for doing snapshot and sending to > another pool or machine I did not remember it just doing a normal > snapshot and delete after a time > > Anyway I will look at both but hope there another way of doing this > > Thanks > Carl > > -Original Message- > From: Guenther Alka > Sent: 23 December 2019 08:20 > To: openindiana-discuss@openindiana.org > Subject: Re: [OpenIndiana-discuss] what auto snapshot is been used > > You can use my napp-it. > > This is a feature complete webmanagement tool for a OmniOS, OpenIndiana and > Solaris storageserver. Among other it comes with a menu Jobs > Autosnap > where you can set autsnaps with many features like timetable, keep and hold > parameters. > > The free version is ok for whole basic storage management. > Installation is done via a single command (as root in /root) wget -O - > www.napp-it.org/nappit | perl > > Open napp-it via browser at address http://serverip:81 and goto menu > Jobs > Autosnap > Create > > gea > @napp-it.org > > Am 22.12.2019 um 18:23 schrieb Carl Brunning: >> HI question >> am using the latest hipster server so no gui so what people using to >> do auto snapshot >> >> and instruction on how to setup and use as i would like this feature >> for my server >> >> thanks >> Carl >> >> ___ >> openindiana-discuss mailing list >> openindiana-discuss@openindiana.org >> https://openindiana.org/mailman/listinfo/openindiana-discuss > ___ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > https://openindiana.org/mailman/listinfo/openindiana-discuss > ___ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > https://openindiana.org/mailman/listinfo/openindiana-discuss -- ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
Re: [OpenIndiana-discuss] what auto snapshot is been used
What does not work? If you use OI text edition 2019.10 napp-it should work out of the box. Lately there was a Perl/gcc problem with an initial setup of OI 19.10 that is fixed in current installer. https://napp-it.org/downloads/openindiana.html If napp-it is running and you can create autosnap jobs, you may need to additionally enable autojob at all ex Jobs > Auto Service > 5min manuals http://www.napp-it.org/doc/downloads/setup_napp-it_os.pdf (chapter 3, OI) https://napp-it.org/doc/downloads/onepagers.pdf gea @napp-it.org Am 23.12.2019 um 12:13 schrieb Carl Brunning: Thanks for that I've try but it does not work First it took a while to fix the perl problem that you have when there no gui and for some reason it say it doing autosnaps But there nothing show when I do zfs list -t snapshot and there should be a few there but nothing So unless I can work out what it doing/not doing I need another option ZanpZend been a long time since I used so will have a look at the but that I seem to remember was a more for doing snapshot and sending to another pool or machine I did not remember it just doing a normal snapshot and delete after a time Anyway I will look at both but hope there another way of doing this Thanks Carl -Original Message- From: Guenther Alka Sent: 23 December 2019 08:20 To: openindiana-discuss@openindiana.org Subject: Re: [OpenIndiana-discuss] what auto snapshot is been used You can use my napp-it. This is a feature complete webmanagement tool for a OmniOS, OpenIndiana and Solaris storageserver. Among other it comes with a menu Jobs > Autosnap where you can set autsnaps with many features like timetable, keep and hold parameters. The free version is ok for whole basic storage management. Installation is done via a single command (as root in /root) wget -O - www.napp-it.org/nappit | perl Open napp-it via browser at address http://serverip:81 and goto menu Jobs > Autosnap > Create gea @napp-it.org Am 22.12.2019 um 18:23 schrieb Carl Brunning: HI question am using the latest hipster server so no gui so what people using to do auto snapshot and instruction on how to setup and use as i would like this feature for my server thanks Carl ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss -- ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
Re: [OpenIndiana-discuss] what auto snapshot is been used
Thanks for that I've try but it does not work First it took a while to fix the perl problem that you have when there no gui and for some reason it say it doing autosnaps But there nothing show when I do zfs list -t snapshot and there should be a few there but nothing So unless I can work out what it doing/not doing I need another option ZanpZend been a long time since I used so will have a look at the but that I seem to remember was a more for doing snapshot and sending to another pool or machine I did not remember it just doing a normal snapshot and delete after a time Anyway I will look at both but hope there another way of doing this Thanks Carl -Original Message- From: Guenther Alka Sent: 23 December 2019 08:20 To: openindiana-discuss@openindiana.org Subject: Re: [OpenIndiana-discuss] what auto snapshot is been used You can use my napp-it. This is a feature complete webmanagement tool for a OmniOS, OpenIndiana and Solaris storageserver. Among other it comes with a menu Jobs > Autosnap where you can set autsnaps with many features like timetable, keep and hold parameters. The free version is ok for whole basic storage management. Installation is done via a single command (as root in /root) wget -O - www.napp-it.org/nappit | perl Open napp-it via browser at address http://serverip:81 and goto menu Jobs > Autosnap > Create gea @napp-it.org Am 22.12.2019 um 18:23 schrieb Carl Brunning: > HI question > am using the latest hipster server so no gui so what people using to > do auto snapshot > > and instruction on how to setup and use as i would like this feature > for my server > > thanks > Carl > > ___ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > https://openindiana.org/mailman/listinfo/openindiana-discuss ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
Re: [OpenIndiana-discuss] what auto snapshot is been used
You can use my napp-it. This is a feature complete webmanagement tool for a OmniOS, OpenIndiana and Solaris storageserver. Among other it comes with a menu Jobs > Autosnap where you can set autsnaps with many features like timetable, keep and hold parameters. The free version is ok for whole basic storage management. Installation is done via a single command (as root in /root) wget -O - www.napp-it.org/nappit | perl Open napp-it via browser at address http://serverip:81 and goto menu Jobs > Autosnap > Create gea @napp-it.org Am 22.12.2019 um 18:23 schrieb Carl Brunning: HI question am using the latest hipster server so no gui so what people using to do auto snapshot and instruction on how to setup and use as i would like this feature for my server thanks Carl ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
