[osol-discuss] how to mount drives
1. how to mount windows ntfs and fat32 drives in solaris11? 2. how to configure or start broadband connection in solaris11? 3. how to mount USB drives in solaris11? 4. while mounting Fat32 it gives I/O error This message posted from opensolaris.org ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] how to mount drives
On Wed, 19 Sep 2007, vijay wrote: 1. how to mount windows ntfs and fat32 drives in solaris11? 2. how to configure or start broadband connection in solaris11? 3. how to mount USB drives in solaris11? Rob answered these. 4. while mounting Fat32 it gives I/O error Does that also happen if you use PCFS as changed here: http://cr.grommit.com/~frankho/ you need a recent - later than build 72 - opensolaris kernel, and then you can use these modules. Thanks, FrankH. This message posted from opensolaris.org ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] how to mount drives
vijay wrote: 1. how to mount windows ntfs and fat32 drives in solaris11? You can't currently mount NTFS from Solaris without extra software. I have no experience with the NTFS bits available, but you should be able to search the archives. I do this to mount FAT32: banff[154]% rmformat -l Looking for devices... 1. Logical Node: /dev/rdsk/c7t0d0s2 Physical Node: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],2/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 Connected Device: TOSHIBA MK4004GAHJD00 Device Type: Removable Bus: USB Size: 38.1 GB Label: None Access permissions: Medium is not write protected. ... Take the device string, point to dsk instead of rdsk to get the block device, and append a :c to get the right partition: banff[155]% sudo mount -F pcfs /dev/dsk/c7t0d0s2:c /mnt Password: banff[478]% df /mnt Filesystemkbytesused avail capacity Mounted on /dev/dsk/c7t0d0s2:c 38779424 33371264 540816087%/mnt 2. how to configure or start broadband connection in solaris11? Plug an Ethernet cable into the machine, and look in /var/adm/messages for the link up notice: banff[157]% grep link up /var/adm/messages Sep 14 08:53:49 banff bge: [ID 801725 kern.info] NOTICE: bge0: link up 1000Mbps Full-Duplex (initialized) Now you know your Ethernet device type, and can use DHCP or manual network configuration: # ifconfig bge0 plumb # ifconfig bge0 dhcp # ifconfig -a or # ifconfig bge0 plumb # ifconfig bge0 up 10.0.0.15 netmask 255.255.255.0 # route add default 10.0.0.1 # ifconfig -a 3. how to mount USB drives in solaris11? They're FAT32 out of the box, so see above. Rob T ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] how to mount drives
1. how to mount windows ntfs and fat32 drives in solaris11? For ntfs, this works, but it will be readonly: http://blogs.sun.com/pradhap/entry/mounting_ntfs_partition_in_solaris 2. how to configure or start broadband connection in solaris11? It depends upon whether you are expecting to change interfaces automatically or not (between wireless and network). If so, then just make sure nwam is enabled: http://www.opensolaris.org/os/project/nwam/phase0/nwamd_1m/ Alternatively, you can disable nwam and use the ifconfig command to set things as needed. Gary This message posted from opensolaris.org ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org