[Openstack] Configuring Live Migration
Hello guys, I'm following this manual http://docs.openstack.org/trunk/openstack-compute/admin/content/configuring-live-migrations.html, and I'm trying to configure live migration on my openstack grizzly. I did all the configurations, mounted the disks, but when I put migration in action through the dashboard, it shows status with error. Can anybody give me some help, and which informations I need to send to provide more explanation? Thank you all. Best regards. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Configuring Live Migration
Hello Wangpan, where can I find these logs? Thank you. 2013/7/24 Wangpan hzwang...@corp.netease.com ** Hi Guilherme, What error the compute log says? you may check both the source compute and destination compute node. 2013-07-25 -- Wangpan -- *发件人：*Guilherme Russi luisguilherme...@gmail.com *发送时间：*2013-07-25 03:38 *主题：*[Openstack] Configuring Live Migration *收件人：*openstack@lists.launchpad.netopenstack@lists.launchpad.net *抄送：* Hello guys, I'm following this manual http://docs.openstack.org/trunk/openstack-compute/admin/content/configuring-live-migrations.html, and I'm trying to configure live migration on my openstack grizzly. I did all the configurations, mounted the disks, but when I put migration in action through the dashboard, it shows status with error. Can anybody give me some help, and which informations I need to send to provide more explanation? Thank you all. Best regards. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Updating OpenStack
Hello Claudio, 1 - Yes, they are synced with my network node 2 - I put the configuration on my nova.conf rabbit_host=my_host and rabbit_password=my_pass, are they the only parameters? Thank you. Regards. 2013/7/3 claudio marques clau...@onesource.pt Hi 1 - Do you have your time on your new compute nodes synchronized with network node? 2 - Have you paste the correct credentials to your rabbit MQ server? Cheers clau...@onesource.pt http://www.onesource.pt/ -- From: luisguilherme...@gmail.com Date: Wed, 3 Jul 2013 14:07:04 -0300 To: openstack@lists.launchpad.net Subject: [Openstack] Updating OpenStack Hello guys, I have a Controller node and a Compute node with grizzly installed and working fine, but the problem is, I'm installing two more computes nodes but at both I'm getting error at nova (error attached). I made some researches through the google and I saw some people talking about running an apt-get update / apt-get upgrade at the Controller node and Compute node. My point is, is safe to run this update/upgrade steps? My working controller and compute can stop working (break?) Thank you all. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Updating OpenStack
Yes, that's the point, if a make an apt-get update / apt-get upgrade, my running compute node can break? And more, do I need to run an apt-get update / apt-get upgrade at my Controller node too? 2013/7/3 claudio marques clau...@onesource.pt Probably you have an older nova version running in one of the compute-nodes, and probably that's why you have *UnsupportedRpcVersion exception!* * * Cheers * * clau...@onesource.pt http://www.onesource.pt/ -- From: clau...@onesource.pt To: openstack@lists.launchpad.net Date: Wed, 3 Jul 2013 17:20:47 + Subject: Re: [Openstack] Updating OpenStack Hi 1 - Do you have your time on your new compute nodes synchronized with network node? 2 - Have you paste the correct credentials to your rabbit MQ server? Cheers clau...@onesource.pt http://www.onesource.pt/ -- From: luisguilherme...@gmail.com Date: Wed, 3 Jul 2013 14:07:04 -0300 To: openstack@lists.launchpad.net Subject: [Openstack] Updating OpenStack Hello guys, I have a Controller node and a Compute node with grizzly installed and working fine, but the problem is, I'm installing two more computes nodes but at both I'm getting error at nova (error attached). I made some researches through the google and I saw some people talking about running an apt-get update / apt-get upgrade at the Controller node and Compute node. My point is, is safe to run this update/upgrade steps? My working controller and compute can stop working (break?) Thank you all. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Updating OpenStack
Ok Calvin, I'll do that, thank you. 2013/7/3 Calvin Austin caus...@bitglass.com I experienced the same thing just yesterday. the python-nova package (on ubuntu) has api changes in dot dot versions, 1.47 brought in a new db call that the server doesn't know about. I ended up downloading the same python-nova package on the new compute node so they could talk python-nova_2013.1-0ubuntu1_all.deb regards calvin On Wed, Jul 3, 2013 at 10:32 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Yes, that's the point, if a make an apt-get update / apt-get upgrade, my running compute node can break? And more, do I need to run an apt-get update / apt-get upgrade at my Controller node too? 2013/7/3 claudio marques clau...@onesource.pt Probably you have an older nova version running in one of the compute-nodes, and probably that's why you have *UnsupportedRpcVersion exception!* * * Cheers * * clau...@onesource.pt http://www.onesource.pt/ -- From: clau...@onesource.pt To: openstack@lists.launchpad.net Date: Wed, 3 Jul 2013 17:20:47 + Subject: Re: [Openstack] Updating OpenStack Hi 1 - Do you have your time on your new compute nodes synchronized with network node? 2 - Have you paste the correct credentials to your rabbit MQ server? Cheers clau...@onesource.pt http://www.onesource.pt/ -- From: luisguilherme...@gmail.com Date: Wed, 3 Jul 2013 14:07:04 -0300 To: openstack@lists.launchpad.net Subject: [Openstack] Updating OpenStack Hello guys, I have a Controller node and a Compute node with grizzly installed and working fine, but the problem is, I'm installing two more computes nodes but at both I'm getting error at nova (error attached). I made some researches through the google and I saw some people talking about running an apt-get update / apt-get upgrade at the Controller node and Compute node. My point is, is safe to run this update/upgrade steps? My working controller and compute can stop working (break?) Thank you all. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Updating OpenStack
Hello Trevor, I did that :) 2013/7/3 Trevor Roberts Jr vmtroo...@gmail.com Hi Guilherme, To ensure that all settings match up correctly, it's advised to copy the nova.conf from your Controller node, or the Compute Node that works, to each new Nova node -Trevor Sent from my iPad On Jul 3, 2013, at 7:30 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello Claudio, 1 - Yes, they are synced with my network node 2 - I put the configuration on my nova.conf rabbit_host=my_host and rabbit_password=my_pass, are they the only parameters? Thank you. Regards. 2013/7/3 claudio marques clau...@onesource.pt Hi 1 - Do you have your time on your new compute nodes synchronized with network node? 2 - Have you paste the correct credentials to your rabbit MQ server? Cheers clau...@onesource.pt http://www.onesource.pt/ -- From: luisguilherme...@gmail.com Date: Wed, 3 Jul 2013 14:07:04 -0300 To: openstack@lists.launchpad.net Subject: [Openstack] Updating OpenStack Hello guys, I have a Controller node and a Compute node with grizzly installed and working fine, but the problem is, I'm installing two more computes nodes but at both I'm getting error at nova (error attached). I made some researches through the google and I saw some people talking about running an apt-get update / apt-get upgrade at the Controller node and Compute node. My point is, is safe to run this update/upgrade steps? My working controller and compute can stop working (break?) Thank you all. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Updating OpenStack
I made the download from python-nova_2013.1-0ubuntu2_all.deb and installed it, then I made the apt-get install nova-compute-kvm but I'm still getting the same error, am I doing something wrong? Thank you guys. 2013/7/3 claudio marques clau...@onesource.pt In your place I just download the same nova packages to your new compute nodes as you got on the first one as Calvin said! Upgrading your existing network node and compute node can result in disaster :) Good luck Cheers Claudio Marques clau...@onesource.pt http://www.onesource.pt/ -- Date: Wed, 3 Jul 2013 10:41:37 -0700 From: caus...@bitglass.com To: luisguilherme...@gmail.com CC: clau...@onesource.pt; openstack@lists.launchpad.net Subject: Re: [Openstack] Updating OpenStack I experienced the same thing just yesterday. the python-nova package (on ubuntu) has api changes in dot dot versions, 1.47 brought in a new db call that the server doesn't know about. I ended up downloading the same python-nova package on the new compute node so they could talk python-nova_2013.1-0ubuntu1_all.deb regards calvin On Wed, Jul 3, 2013 at 10:32 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Yes, that's the point, if a make an apt-get update / apt-get upgrade, my running compute node can break? And more, do I need to run an apt-get update / apt-get upgrade at my Controller node too? 2013/7/3 claudio marques clau...@onesource.pt Probably you have an older nova version running in one of the compute-nodes, and probably that's why you have *UnsupportedRpcVersion exception!* * * Cheers * * clau...@onesource.pt http://www.onesource.pt/ -- From: clau...@onesource.pt To: openstack@lists.launchpad.net Date: Wed, 3 Jul 2013 17:20:47 + Subject: Re: [Openstack] Updating OpenStack Hi 1 - Do you have your time on your new compute nodes synchronized with network node? 2 - Have you paste the correct credentials to your rabbit MQ server? Cheers clau...@onesource.pt http://www.onesource.pt/ -- From: luisguilherme...@gmail.com Date: Wed, 3 Jul 2013 14:07:04 -0300 To: openstack@lists.launchpad.net Subject: [Openstack] Updating OpenStack Hello guys, I have a Controller node and a Compute node with grizzly installed and working fine, but the problem is, I'm installing two more computes nodes but at both I'm getting error at nova (error attached). I made some researches through the google and I saw some people talking about running an apt-get update / apt-get upgrade at the Controller node and Compute node. My point is, is safe to run this update/upgrade steps? My working controller and compute can stop working (break?) Thank you all. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Updating OpenStack
It is showing the 1.47, i'm lokking through the internet how to install the packages that match with my working compute node. I still have no clue how to do that :( Regards. 2013/7/3 Calvin Austin caus...@bitglass.com downgrading to python-nova was the last thing I did, apt-get might fix you to the latest one. You can check file /usr/lib/python2.7/dist-packages/nova/conductor/rpcapi.py If it mentions 1.47 in the API version history you have the later python-nova, when you downgrade it will ask you if its ok. regards calvin On Wed, Jul 3, 2013 at 11:23 AM, Guilherme Russi luisguilherme...@gmail.com wrote: I made the download from python-nova_2013.1-0ubuntu2_all.deb and installed it, then I made the apt-get install nova-compute-kvm but I'm still getting the same error, am I doing something wrong? Thank you guys. 2013/7/3 claudio marques clau...@onesource.pt In your place I just download the same nova packages to your new compute nodes as you got on the first one as Calvin said! Upgrading your existing network node and compute node can result in disaster :) Good luck Cheers Claudio Marques clau...@onesource.pt http://www.onesource.pt/ -- Date: Wed, 3 Jul 2013 10:41:37 -0700 From: caus...@bitglass.com To: luisguilherme...@gmail.com CC: clau...@onesource.pt; openstack@lists.launchpad.net Subject: Re: [Openstack] Updating OpenStack I experienced the same thing just yesterday. the python-nova package (on ubuntu) has api changes in dot dot versions, 1.47 brought in a new db call that the server doesn't know about. I ended up downloading the same python-nova package on the new compute node so they could talk python-nova_2013.1-0ubuntu1_all.deb regards calvin On Wed, Jul 3, 2013 at 10:32 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Yes, that's the point, if a make an apt-get update / apt-get upgrade, my running compute node can break? And more, do I need to run an apt-get update / apt-get upgrade at my Controller node too? 2013/7/3 claudio marques clau...@onesource.pt Probably you have an older nova version running in one of the compute-nodes, and probably that's why you have *UnsupportedRpcVersion exception!* * * Cheers * * clau...@onesource.pt http://www.onesource.pt/ -- From: clau...@onesource.pt To: openstack@lists.launchpad.net Date: Wed, 3 Jul 2013 17:20:47 + Subject: Re: [Openstack] Updating OpenStack Hi 1 - Do you have your time on your new compute nodes synchronized with network node? 2 - Have you paste the correct credentials to your rabbit MQ server? Cheers clau...@onesource.pt http://www.onesource.pt/ -- From: luisguilherme...@gmail.com Date: Wed, 3 Jul 2013 14:07:04 -0300 To: openstack@lists.launchpad.net Subject: [Openstack] Updating OpenStack Hello guys, I have a Controller node and a Compute node with grizzly installed and working fine, but the problem is, I'm installing two more computes nodes but at both I'm getting error at nova (error attached). I made some researches through the google and I saw some people talking about running an apt-get update / apt-get upgrade at the Controller node and Compute node. My point is, is safe to run this update/upgrade steps? My working controller and compute can stop working (break?) Thank you all. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netUnsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack
Re: [Openstack] Quantum + Ryu on Folsom
Hello Daniele, thank you for your support, I will install in my lab too. Regards. Guilherme. 2013/5/8 Stroppa Daniele (strp) s...@zhaw.ch Guilherme, If you do upgrade to Grizzly (either with Devstack or Ubuntu packages) check these pages https://github.com/osrg/ryu/wiki/OpenStack They are quite complete, we used them as a reference for our lab installation. Regards, -- Daniele Stroppa Researcher Institute of Information Technology Zürich University of Applied Sciences http://www.cloudcomp.chhttp://www.cloudcomp.ch/ From: Guilherme Russi luisguilherme...@gmail.commailto: luisguilherme...@gmail.com Date: Tue, 7 May 2013 14:23:41 -0300 To: Kyle Mestery (kmestery) kmest...@cisco.commailto: kmest...@cisco.com Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net Subject: Re: [Openstack] Quantum + Ryu on Folsom Well, thank you for your support, I'll try to do this and I'll let you know if it worked, or not. Regards. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.commailto: kmest...@cisco.com I would have to defer to the normal Ubuntu OpenStack install/upgrade procedures here, I'm not an expert in that area. On May 7, 2013, at 12:01 PM, Guilherme Russi luisguilherme...@gmail.com mailto:luisguilherme...@gmail.com wrote: I'm not using devstack, I have installed each component and put a repository in my ubuntu, I need to purge all of them or just change the repository and run an apt-get update / apt-get upgrade? Regards. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.commailto: kmest...@cisco.com If you are using devstack, it's as simple as adding a stable/grizzly for each component you are running, similar to this: NOVA_BRANCH=stable/grizzly Repeat that for the services you are running, (e.g. Quantum, Glance, etc.). Thanks, Kyle On May 7, 2013, at 10:20 AM, Guilherme Russi luisguilherme...@gmail.com mailto:luisguilherme...@gmail.com wrote: Hello again Kyle, thank you for answering, how do I update the Openstack version, from Folsom to Grizzly? Regards. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.commailto: kmest...@cisco.com You don't want to run nova-network with OpenStack Networking (Quantum) at the same time. If you're running Folsom, I think upstream Ryu has changed such that the Folsom version of the Quantum plugin may not work. Running Grizzly will solve this, or alternatively if you want to try Folsom, look at the github page here for instructions on which branch of Ryu to pull to get it working with Folsom Quantum: https://github.com/osrg/ryu/wiki/RYU-Openstack-Folsom-environment-HOWTO Thanks, Kyle On May 7, 2013, at 8:21 AM, Guilherme Russi luisguilherme...@gmail.commailto:luisguilherme...@gmail.com wrote: Hello Kyle, The doubts are, If I install the ryu plugin, my current working openstack will broken, I mean, only installing ryu by the step python ./setup.py install, another thing, and the part to configure nova.conf, I don't have nova-network, I must install it? Thanks. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.commailto: kmest...@cisco.com On May 7, 2013, at 7:57 AM, Guilherme Russi luisguilherme...@gmail.commailto:luisguilherme...@gmail.com wrote: Hello Guys, I'm here again with some doubt, have anybody already installed the Ryu plugin with Quantum? I'm trying to follow this page: http://osrg.github.io/ryu/doc/using_with_openstack.html but it's not working. Can anybody help me with some doubts about the installation? Thank you so much. What exactly is happening with Ryu on Folsom here? I've run this before and had no issues, so I can try to provide some help here. Kyle Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.netmailto: openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net mailto:openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] horizon dashboard error 500
Hello Rajesh, where should I change this COMPRESS_OFFLINE? Thank you. Guilherme. 2013/5/3 Rajesh Upadhayay rupadha...@xavient.com This has issue has been fixed by changing False as false. COMPRESS_OFFLINE = false -Original Message- From: Julie Pichon [mailto:jpic...@redhat.com] Sent: Friday, May 03, 2013 8:29 PM To: Rajesh Upadhayay Cc: openstack@lists.launchpad.net Subject: Re: [Openstack] horizon dashboard error 500 Hi, Rajesh Upadhayay rupadha...@xavient.com wrote: I have just installed Openstack Grizzly on Ubuntu 12.04 LTS.. Everything was fine but after server reboot, I lost dashboard and getting error 500 Internal Server Error. I have verified all configuration but didn't get any idea. Have a look in the Apache error logs, there should be more information about the error. If this is a dev or test environment (not production), you could also set DEBUG to True in your local_settings.py to display more information when the error occurs. Regards, Julie ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] horizon dashboard error 500
But where is the path that I can find this file? 2013/5/8 Gabriel Hurley gabriel.hur...@nebula.com There's something very wrong is false doesn't raise an exception. In Python False is a Boolean value, false is a variable name which should be undefined. That aside, you should set COMPRESS_OFFLINE=False in your openstack_dashboard/local/local_settings.py file. - Gabriel -Original Message- From: Openstack [mailto:openstack- bounces+gabriel.hurley=nebula@lists.launchpad.net] On Behalf Of Rajesh Upadhayay Sent: Friday, May 03, 2013 10:18 AM To: Julie Pichon Cc: openstack@lists.launchpad.net Subject: Re: [Openstack] horizon dashboard error 500 This has issue has been fixed by changing False as false. COMPRESS_OFFLINE = false -Original Message- From: Julie Pichon [mailto:jpic...@redhat.com] Sent: Friday, May 03, 2013 8:29 PM To: Rajesh Upadhayay Cc: openstack@lists.launchpad.net Subject: Re: [Openstack] horizon dashboard error 500 Hi, Rajesh Upadhayay rupadha...@xavient.com wrote: I have just installed Openstack Grizzly on Ubuntu 12.04 LTS.. Everything was fine but after server reboot, I lost dashboard and getting error 500 Internal Server Error. I have verified all configuration but didn't get any idea. Have a look in the Apache error logs, there should be more information about the error. If this is a dev or test environment (not production), you could also set DEBUG to True in your local_settings.py to display more information when the error occurs. Regards, Julie ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] horizon dashboard error 500
:01 2013] [error] [client 192.168.3.1] File /usr/lib/python2.7/dist-packages/django/template/loader_tags.py, line 155, in render, referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] return self.render_template(self.template, context), referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] File /usr/lib/python2.7/dist-packages/django/template/loader_tags.py, line 137, in render_template, referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] output = template.render(context), referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] File /usr/lib/python2.7/dist-packages/django/template/base.py, line 140, in render, referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] return self._render(context), referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] File /usr/lib/python2.7/dist-packages/django/template/base.py, line 134, in _render, referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] return self.nodelist.render(context), referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] File /usr/lib/python2.7/dist-packages/django/template/base.py, line 823, in render, referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] bit = self.render_node(node, context), referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] File /usr/lib/python2.7/dist-packages/django/template/base.py, line 837, in render_node, referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] return node.render(context), referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] File /usr/lib/python2.7/dist-packages/compressor/templatetags/compress.py, line 147, in render, referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] return self.render_compressed(context, self.kind, self.mode, forced=forced), referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] File /usr/lib/python2.7/dist-packages/compressor/templatetags/compress.py, line 88, in render_compressed, referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] cached_offline = self.render_offline(context, forced=forced), referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] File /usr/lib/python2.7/dist-packages/compressor/templatetags/compress.py, line 72, in render_offline, referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] 'You may need to run python manage.py compress.' % key), referer: http://192.168.3.1/horizon [Wed May 08 19:48:01 2013] [error] [client 192.168.3.1] OfflineGenerationError: You have offline compression enabled but key 3ddd89d27fa2e162d4efd30c103a072b is missing from offline manifest. You may need to run python manage.py compress., referer: http://192.168.3.1/horizon I made the upgrade from Folsom to Grizzly, maybe I'm missing something? Regards. Guilherme. 2013/5/8 Guilherme Russi luisguilherme...@gmail.com But where is the path that I can find this file? 2013/5/8 Gabriel Hurley gabriel.hur...@nebula.com There's something very wrong is false doesn't raise an exception. In Python False is a Boolean value, false is a variable name which should be undefined. That aside, you should set COMPRESS_OFFLINE=False in your openstack_dashboard/local/local_settings.py file. - Gabriel -Original Message- From: Openstack [mailto:openstack- bounces+gabriel.hurley=nebula@lists.launchpad.net] On Behalf Of Rajesh Upadhayay Sent: Friday, May 03, 2013 10:18 AM To: Julie Pichon Cc: openstack@lists.launchpad.net Subject: Re: [Openstack] horizon dashboard error 500 This has issue has been fixed by changing False as false. COMPRESS_OFFLINE = false -Original Message- From: Julie Pichon [mailto:jpic...@redhat.com] Sent: Friday, May 03, 2013 8:29 PM To: Rajesh Upadhayay Cc: openstack@lists.launchpad.net Subject: Re: [Openstack] horizon dashboard error 500 Hi, Rajesh Upadhayay rupadha...@xavient.com wrote: I have just installed Openstack Grizzly on Ubuntu 12.04 LTS.. Everything was fine but after server reboot, I lost dashboard and getting error 500 Internal Server Error. I have verified all configuration but didn't get any idea. Have a look in the Apache error logs, there should be more information about the error. If this is a dev or test environment (not production), you could also set DEBUG to True in your local_settings.py to display more information when the error occurs. Regards, Julie
[Openstack] Quantum + Ryu on Folsom
Hello Guys, I'm here again with some doubt, have anybody already installed the Ryu plugin with Quantum? I'm trying to follow this page: http://osrg.github.io/ryu/doc/using_with_openstack.html but it's not working. Can anybody help me with some doubts about the installation? Thank you so much. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Quantum + Ryu on Folsom
Hello Kyle, The doubts are, If I install the ryu plugin, my current working openstack will broken, I mean, only installing ryu by the step python ./setup.py install, another thing, and the part to configure nova.conf, I don't have nova-network, I must install it? Thanks. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.com On May 7, 2013, at 7:57 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello Guys, I'm here again with some doubt, have anybody already installed the Ryu plugin with Quantum? I'm trying to follow this page: http://osrg.github.io/ryu/doc/using_with_openstack.html but it's not working. Can anybody help me with some doubts about the installation? Thank you so much. What exactly is happening with Ryu on Folsom here? I've run this before and had no issues, so I can try to provide some help here. Kyle Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Quantum + Ryu on Folsom
Hello again Kyle, thank you for answering, how do I update the Openstack version, from Folsom to Grizzly? Regards. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.com You don't want to run nova-network with OpenStack Networking (Quantum) at the same time. If you're running Folsom, I think upstream Ryu has changed such that the Folsom version of the Quantum plugin may not work. Running Grizzly will solve this, or alternatively if you want to try Folsom, look at the github page here for instructions on which branch of Ryu to pull to get it working with Folsom Quantum: https://github.com/osrg/ryu/wiki/RYU-Openstack-Folsom-environment-HOWTO Thanks, Kyle On May 7, 2013, at 8:21 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello Kyle, The doubts are, If I install the ryu plugin, my current working openstack will broken, I mean, only installing ryu by the step python ./setup.py install, another thing, and the part to configure nova.conf, I don't have nova-network, I must install it? Thanks. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.com On May 7, 2013, at 7:57 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello Guys, I'm here again with some doubt, have anybody already installed the Ryu plugin with Quantum? I'm trying to follow this page: http://osrg.github.io/ryu/doc/using_with_openstack.html but it's not working. Can anybody help me with some doubts about the installation? Thank you so much. What exactly is happening with Ryu on Folsom here? I've run this before and had no issues, so I can try to provide some help here. Kyle Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Quantum + Ryu on Folsom
I'm not using devstack, I have installed each component and put a repository in my ubuntu, I need to purge all of them or just change the repository and run an apt-get update / apt-get upgrade? Regards. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.com If you are using devstack, it's as simple as adding a stable/grizzly for each component you are running, similar to this: NOVA_BRANCH=stable/grizzly Repeat that for the services you are running, (e.g. Quantum, Glance, etc.). Thanks, Kyle On May 7, 2013, at 10:20 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello again Kyle, thank you for answering, how do I update the Openstack version, from Folsom to Grizzly? Regards. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.com You don't want to run nova-network with OpenStack Networking (Quantum) at the same time. If you're running Folsom, I think upstream Ryu has changed such that the Folsom version of the Quantum plugin may not work. Running Grizzly will solve this, or alternatively if you want to try Folsom, look at the github page here for instructions on which branch of Ryu to pull to get it working with Folsom Quantum: https://github.com/osrg/ryu/wiki/RYU-Openstack-Folsom-environment-HOWTO Thanks, Kyle On May 7, 2013, at 8:21 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello Kyle, The doubts are, If I install the ryu plugin, my current working openstack will broken, I mean, only installing ryu by the step python ./setup.py install, another thing, and the part to configure nova.conf, I don't have nova-network, I must install it? Thanks. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.com On May 7, 2013, at 7:57 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello Guys, I'm here again with some doubt, have anybody already installed the Ryu plugin with Quantum? I'm trying to follow this page: http://osrg.github.io/ryu/doc/using_with_openstack.html but it's not working. Can anybody help me with some doubts about the installation? Thank you so much. What exactly is happening with Ryu on Folsom here? I've run this before and had no issues, so I can try to provide some help here. Kyle Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Quantum + Ryu on Folsom
Well, thank you for your support, I'll try to do this and I'll let you know if it worked, or not. Regards. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.com I would have to defer to the normal Ubuntu OpenStack install/upgrade procedures here, I'm not an expert in that area. On May 7, 2013, at 12:01 PM, Guilherme Russi luisguilherme...@gmail.com wrote: I'm not using devstack, I have installed each component and put a repository in my ubuntu, I need to purge all of them or just change the repository and run an apt-get update / apt-get upgrade? Regards. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.com If you are using devstack, it's as simple as adding a stable/grizzly for each component you are running, similar to this: NOVA_BRANCH=stable/grizzly Repeat that for the services you are running, (e.g. Quantum, Glance, etc.). Thanks, Kyle On May 7, 2013, at 10:20 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello again Kyle, thank you for answering, how do I update the Openstack version, from Folsom to Grizzly? Regards. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.com You don't want to run nova-network with OpenStack Networking (Quantum) at the same time. If you're running Folsom, I think upstream Ryu has changed such that the Folsom version of the Quantum plugin may not work. Running Grizzly will solve this, or alternatively if you want to try Folsom, look at the github page here for instructions on which branch of Ryu to pull to get it working with Folsom Quantum: https://github.com/osrg/ryu/wiki/RYU-Openstack-Folsom-environment-HOWTO Thanks, Kyle On May 7, 2013, at 8:21 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello Kyle, The doubts are, If I install the ryu plugin, my current working openstack will broken, I mean, only installing ryu by the step python ./setup.py install, another thing, and the part to configure nova.conf, I don't have nova-network, I must install it? Thanks. Guilherme. 2013/5/7 Kyle Mestery (kmestery) kmest...@cisco.com On May 7, 2013, at 7:57 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello Guys, I'm here again with some doubt, have anybody already installed the Ryu plugin with Quantum? I'm trying to follow this page: http://osrg.github.io/ryu/doc/using_with_openstack.html but it's not working. Can anybody help me with some doubts about the installation? Thank you so much. What exactly is happening with Ryu on Folsom here? I've run this before and had no issues, so I can try to provide some help here. Kyle Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
[Openstack] Problem when allocating IP
Hello guys, I'm getting problem when my VMs are allocating IPs. I create the first VM and it works, it gets the IP 10.0.0.4 and I can ssh and ping, but when I create the second, the third and so on VMs the don't get IP. Can anybody guide me where to look to fix it? I'm using Ubuntu 12.04 server, and my openstack version is folsom, and my network plugin is quantum. Thank you. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] controller and network node, same machine?
Hello Steve, I had a lot of troubles deploying my openstack and putting my controller node at the same physical machine with my network node, I have 2 NICs in my controller + network node, if you need help, I can help you. Regards. Guilherme. 2013/4/12 Steve Heistand steve.heist...@nasa.gov -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 mostly Im concerned about the quantum/OVS/qre settings. there are distinct difference in the values in the ovs_quantum_plugin.ini file depending on what type of node the agent is running on. I wasnt sure if it going to work. The problems Ive been having are all network related all centered around getting VMs on compute nodes to be able to see something besides another VM in their tenant. ie the outside world. But my network/ovs-fu is limited so its entirely possible its my fault. just wanted to see if it was even possible in the first place. s On 04/12/2013 06:05 AM, Mohammed Amine SAYA wrote: Hi Steve, Why do you say that? I am curious to learn about the difficulties you have had. I also tried to have controller node and network node running on the same machine but I have never managed to ping a running VM in this configuration with FOLSOM release. Everything was working fine but impossible to ping a VM. Amine. On Fri, Apr 12, 2013 at 2:40 PM, Steve Heistand steve.heist...@nasa.gov mailto:steve.heist...@nasa.gov wrote: so Im beginning to think my attempts at getting a controller node and a network node to be on the same physical machines/OS are doomed. is it even possible to have all the controller and network node features on the same box? Aside from one of them being in a VM that is. thanks s -- Steve Heistand NASA Ames Research Center SciCon Group Mail Stop 258-6 steve.heist...@nasa.gov mailto:steve.heist...@nasa.gov (650) 604-4369 tel:%28650%29%20604-4369 Moffett Field, CA 94035-1000 Any opinions expressed are those of our alien overlords, not my own. # For Remedy# #Action: Resolve # #Resolution: Resolved # #Reason: No Further Action Required # #Tier1: User Code # #Tier2: Other # #Tier3: Assistance # #Notification: None # ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net mailto:openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp - -- Steve Heistand NASA Ames Research Center email: steve.heist...@nasa.gov Steve Heistand/Mail Stop 258-6 ph: (650) 604-4369 Bldg. 258, Rm. 232-5 Scientific HPC ApplicationP.O. Box 1 Development/OptimizationMoffett Field, CA 94035-0001 Any opinions expressed are those of our alien overlords, not my own. # For Remedy# #Action: Resolve# #Resolution: Resolved # #Reason: No Further Action Required # #Tier1: User Code # #Tier2: Other # #Tier3: Assistance # #Notification: None # -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.14 (GNU/Linux) iEYEARECAAYFAlFoDYAACgkQoBCTJSAkVrEXDACeMBENxoBLL4OdayOsSHHDfjgg juUAoMzQCTR2DVk1+usy3SV3yENkrtmP =3vok -END PGP SIGNATURE- ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Allocating dynamic IP to the VMs
Hello Chathura, I'm getting error when allocating floating IPs, can you allocate them? I'm creating my networking following this script: https://raw.github.com/EmilienM/openstack-folsom-guide/master/scripts/quantum-networking.sh Thank you. Guilherme. 2013/3/18 Chathura M. Sarathchandra Magurawalage 77.chath...@gmail.com Thanks Sylvain, There must be a way of doing this without having to do anything with my default gateway of my physical network? . Even if I have to I do not wan to do anything to the physical gateway. All I need is a way to let the VMs get a dynamic IP from the physical network. How can I do this. For example this can be done on virtual box using a bridge adapter which maps the VM in to the physical network. On 18 March 2013 16:05, Sylvain Bauza sylvain.ba...@digimind.com wrote: Could you please tell me your physical network CIDR ? Anyway, what you need is not requiring having a floating IP pool inside the same network, you can also play with static routing : if your physical host does have a default gw, you can create a static route from this gw to the VM network gateway. And on the VM network gateway, do the same... -Sylvain Le 18/03/2013 16:53, Chathura M. Sarathchandra Magurawalage a écrit : Hey Sylvain, Basically what I need is to have the VMs mapped to my physical network so that my physical hosts can directly access the VMs. How can I do this? Thanks. On 18 March 2013 15:50, Sylvain Bauza sylvain.ba...@digimind.com wrote: Hi, I don't understand your business. Should you have a 192.168.1.0/24network for management, you could also assign an external network with Quantum based on the same subnet (ie. 192.168.1.0/24). When creating a floating IP pool, Quantum does require at least 3 things : - the CIDR - the beginning and ending IPs - the external gateway So, based on what I previously said, you only need to create a 192.168.1.0/24 in Quantum with .1-.100 (for example) as the range, .254 being the external gateway. Thanks, -Sylvain Le 18/03/2013 16:29, Chathura M. Sarathchandra Magurawalage a écrit : anyone? On 17 March 2013 21:33, Chathura M. Sarathchandra Magurawalage 77.chath...@gmail.com wrote: After reading a little bit more, I think I have found what I need. It is a provider network that I need for the VMs so that they can get access to the other resources in my main network ( such as other physical hosts that are connected to the same network ). My question is, is it possible to do this alongside the use case that I have followed ( Provider router with private networks)? If so how can I do this? Thanks. On 16 March 2013 01:46, Chathura M. Sarathchandra Magurawalage 77.chath...@gmail.com wrote: Hello, I want to know how I can allocate a dynamic IP to the VM from the same network as the openstack hosts (controller/network-node/compute node) network/management network . For example, in virtual box you can give your VM an IP from the host's network using a Bridge adapter. How can I do this in openstack? From what I understand floating IP's are used when you have a public IP (which is static) to be allocated to VM's. My openstack installation architecture: http://docs.openstack.org/folsom/basic-install/content/basic-install_architecture.html Quantum use case: http://docs.openstack.org/trunk/openstack-network/admin/content/use_cases_single_router.html ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
[Openstack] Error when creating second VM
Hello guys, I need some help here, I was in trouble with the VM's IP attachment (Folsom with Quantum) but the Chathura's solution worked fine to me, but now I have my compute node with one VM running fine, with right IP from DHCP, the problem is when I create another VMs, my dashboard list the second, third, etc, with error, here is my Computer's log to nova-compute. Anybody can help me to solve it, i'm really confuse, because I have one VM running. 2013-03-06 14:33:37 6954 DEBUG nova.manager [-] Running periodic task ComputeManager._publish_service_capabilities periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-03-06 14:33:37 6954 DEBUG nova.manager [-] Notifying Schedulers of capabilities ... _publish_service_capabilities /usr/lib/python2.7/dist-packages/nova/manager.py:231 2013-03-06 14:33:37 6954 DEBUG nova.openstack.common.rpc.amqp [-] Making asynchronous fanout cast... fanout_cast /usr/lib/python2.7/dist-packages/nova/openstack/common/rpc/amqp.py:385 2013-03-06 14:33:37 6954 DEBUG nova.manager [-] Running periodic task ComputeManager._poll_rescued_instances periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-03-06 14:33:37 6954 DEBUG nova.manager [-] Skipping ComputeManager._sync_power_states, 5 ticks left until next run periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:167 2013-03-06 14:33:37 6954 DEBUG nova.manager [-] Running periodic task ComputeManager._poll_bandwidth_usage periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-03-06 14:33:37 6954 DEBUG nova.manager [-] Running periodic task ComputeManager._instance_usage_audit periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-03-06 14:33:37 6954 DEBUG nova.manager [-] Running periodic task ComputeManager.update_available_resource periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-03-06 14:33:37 6954 DEBUG nova.utils [-] Got semaphore compute_resources for method update_available_resource... inner /usr/lib/python2.7/dist-packages/nova/utils.py:765 2013-03-06 14:33:47 6954 DEBUG nova.utils [-] Running cmd (subprocess): env LC_ALL=C LANG=C qemu-img info /var/lib/nova/instances/instance-0012/disk execute /usr/lib/python2.7/dist-packages/nova/utils.py:187 2013-03-06 14:33:47 6954 DEBUG nova.utils [-] Result was 0 execute /usr/lib/python2.7/dist-packages/nova/utils.py:203 2013-03-06 14:33:47 6954 DEBUG nova.utils [-] Running cmd (subprocess): env LC_ALL=C LANG=C qemu-img info /var/lib/nova/instances/instance-0012/disk execute /usr/lib/python2.7/dist-packages/nova/utils.py:187 2013-03-06 14:33:47 6954 DEBUG nova.utils [-] Result was 0 execute /usr/lib/python2.7/dist-packages/nova/utils.py:203 2013-03-06 14:33:47 6954 DEBUG nova.compute.resource_tracker [-] Hypervisor: free ram (MB): 15248 _report_hypervisor_resource_view /usr/lib/python2.7/dist-packages/nova/compute/resource_tracker.py:470 2013-03-06 14:33:47 6954 DEBUG nova.compute.resource_tracker [-] Hypervisor: free disk (GB): 369 _report_hypervisor_resource_view /usr/lib/python2.7/dist-packages/nova/compute/resource_tracker.py:471 2013-03-06 14:33:47 6954 DEBUG nova.compute.resource_tracker [-] Hypervisor: free VCPUs: 7 _report_hypervisor_resource_view /usr/lib/python2.7/dist-packages/nova/compute/resource_tracker.py:476 2013-03-06 14:33:47 6954 AUDIT nova.compute.resource_tracker [-] Free ram (MB): 14932 2013-03-06 14:33:47 6954 AUDIT nova.compute.resource_tracker [-] Free disk (GB): 372 2013-03-06 14:33:47 6954 AUDIT nova.compute.resource_tracker [-] Free VCPUS: 7 2013-03-06 14:33:47 6954 INFO nova.compute.resource_tracker [-] Compute_service record updated for baco 2013-03-06 14:33:47 6954 DEBUG nova.manager [-] Running periodic task ComputeManager._poll_rebooting_instances periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-03-06 14:33:47 6954 DEBUG nova.manager [-] Skipping ComputeManager._cleanup_running_deleted_instances, 10 ticks left until next run periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:167 2013-03-06 14:33:47 6954 DEBUG nova.manager [-] Running periodic task ComputeManager._check_instance_build_time periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-03-06 14:33:47 6954 DEBUG nova.manager [-] Running periodic task ComputeManager._heal_instance_info_cache periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-03-06 14:33:47 6954 DEBUG nova.network.quantumv2.api [-] get_instance_nw_info() for 01 _get_instance_nw_info /usr/lib/python2.7/dist-packages/nova/network/quantumv2/api.py:190 2013-03-06 14:33:48 6954 DEBUG nova.compute.manager [-] [instance: 64e0e53d-0477-4354-89df-15967e67ee9b] Updated the info_cache for instance _heal_instance_info_cache /usr/lib/python2.7/dist-packages/nova/compute/manager.py:2484 2013-03-06 14:33:48 6954 DEBUG nova.manager [-] Running periodic task ComputeManager._run_image_cache_manager_pass periodic_tasks
Re: [Openstack] Doubt quantum script
Found the problem, when I did the step: ovs-vsctl add-port br-ex eth2, it stopped my lan communication. Any idea? 2013/3/4 Guilherme Russi luisguilherme...@gmail.com Hello guys, I'm installing the openstack folsom again, but now I have a controller node in a proper physical machine and the network node in another one, but which of them I execute the quantum-networking script? I'm following this manual http://docs.openstack.org/folsom/basic-install/content/basic-install_network.htmland I'm trying to execute at the network node, but I got error when execute it. When I type keystone tenant-list and quantum net-list I got the error [Errno 111] Unable to communicate with identity service. My novarc is configured at the network node too. Thanks. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] VM doesnt get IP
Hello Aaron, I can ping to 192.168.3.3 ping 192.168.3.3 PING 192.168.3.3 (192.168.3.3) 56(84) bytes of data. 64 bytes from 192.168.3.3: icmp_req=1 ttl=64 time=0.237 ms 64 bytes from 192.168.3.3: icmp_req=2 ttl=64 time=0.193 ms What am I missing? Regards. Guilherme. 2013/2/23 Rahul Sharma rahulsharma...@gmail.com In one config, you have specified local_ip as 10.10.10.1 and in other as 192.168.3.3 . Doesn't they should belong to same network? As per the doc, it should be 10.10.10.3? Plus, these both belong to Data-Network, which is not controller-network communication but compute-network communication. -Regards Rahul On Sat, Feb 23, 2013 at 12:53 AM, Aaron Rosen aro...@nicira.com wrote: From the network+controller node can you ping to 192.168.3.3 (just to confirm there is ip connectivity between those). Your configs look fine to me. The issue you are having is that your network+controller node doesn't have a tunnel to your HV node. I'd suggest restarting the quantum-plugin-openvswitch-agent service on both nodes and see if that does the trick in order to get the agent to add the tunnel for you. Perhaps you edited this file and didn't restart the agent? Aaron On Fri, Feb 22, 2013 at 10:55 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Here is my controller + network node: cat /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini [DATABASE] # This line MUST be changed to actually run the plugin. # Example: # sql_connection = mysql://root:nova@127.0.0.1:3306/ovs_quantum # Replace 127.0.0.1 above with the IP address of the database used by the # main quantum server. (Leave it as is if the database runs on this host.) sql_connection = mysql://quantum:password@localhost:3306/quantum # Database reconnection retry times - in event connectivity is lost # set to -1 implies an infinite retry count # sql_max_retries = 10 # Database reconnection interval in seconds - in event connectivity is lost reconnect_interval = 2 [OVS] # (StrOpt) Type of network to allocate for tenant networks. The # default value 'local' is useful only for single-box testing and # provides no connectivity between hosts. You MUST either change this # to 'vlan' and configure network_vlan_ranges below or change this to # 'gre' and configure tunnel_id_ranges below in order for tenant # networks to provide connectivity between hosts. Set to 'none' to # disable creation of tenant networks. # # Default: tenant_network_type = local # Example: tenant_network_type = gre tenant_network_type = gre # (ListOpt) Comma-separated list of # physical_network[:vlan_min:vlan_max] tuples enumerating ranges # of VLAN IDs on named physical networks that are available for # allocation. All physical networks listed are available for flat and # VLAN provider network creation. Specified ranges of VLAN IDs are # available for tenant network allocation if tenant_network_type is # 'vlan'. If empty, only gre and local networks may be created. # # Default: network_vlan_ranges = # Example: network_vlan_ranges = physnet1:1000:2999 # (BoolOpt) Set to True in the server and the agents to enable support # for GRE networks. Requires kernel support for OVS patch ports and # GRE tunneling. # # Default: enable_tunneling = False enable_tunneling = True # (ListOpt) Comma-separated list of tun_min:tun_max tuples # enumerating ranges of GRE tunnel IDs that are available for tenant # network allocation if tenant_network_type is 'gre'. # # Default: tunnel_id_ranges = # Example: tunnel_id_ranges = 1:1000 tunnel_id_ranges = 1:1000 # Do not change this parameter unless you have a good reason to. # This is the name of the OVS integration bridge. There is one per hypervisor. # The integration bridge acts as a virtual patch bay. All VM VIFs are # attached to this bridge and then patched according to their network # connectivity. # # Default: integration_bridge = br-int integration_bridge = br-int # Only used for the agent if tunnel_id_ranges (above) is not empty for # the server. In most cases, the default value should be fine. # # Default: tunnel_bridge = br-tun tunnel_bridge = br-tun # Uncomment this line for the agent if tunnel_id_ranges (above) is not # empty for the server. Set local-ip to be the local IP address of # this hypervisor. # # Default: local_ip = local_ip = 10.10.10.1 And here is my compute node: cat /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini [DATABASE] # This line MUST be changed to actually run the plugin. # Example: # sql_connection = mysql://root:nova@127.0.0.1:3306/ovs_quantum # Replace 127.0.0.1 above with the IP address of the database used by the # main quantum server. (Leave it as is if the database runs on this host.) sql_connection = mysql://quantum:password@192.168.3.1:3306/quantum # Database reconnection retry times - in event connectivity is lost # set to -1 implies an infinite retry count # sql_max_retries = 10
Re: [Openstack] VM doesnt get IP
Hello Aaron, Here are the outputs. Thanks. Guilherme. 2013/2/21 Aaron Rosen aro...@nicira.com The output to the following would be a good start: quantum net-list quantum port-list ovs-dpctl show (on all nodes) Also make sure the quantum-dhcp-agent is running on your network node. Aaron On Thu, Feb 21, 2013 at 11:23 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Sorry about that, I'm using Folsom release with quantum, I'm installing the controller node and the network node in the same physical machine, I'm following this tutorial: http://docs.openstack.org/folsom/basic-install/content/basic-install_controller.html Which config files do you need? Thanks. Guilherme. 2013/2/21 Aaron Rosen aro...@nicira.com Hi, You'll have to provide more information than this for anyone to help you: i.e are you using quantum or nova-network, if your using quantum which plugin, config files etc. Aaron On Thu, Feb 21, 2013 at 11:13 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello guys, I'm getting problem in my VMs' creation, they don't get IP, the log piece shows: Starting network... udhcpc (v1.18.5) started Sending discover... Sending discover... Sending discover... No lease, failing WARN: /etc/rc3.d/S40-network failed Do you have any idea how I can solve it? Thank you so much. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp outputs Description: Binary data ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] VM doesnt get IP
So guys, any idea about what am i missing? Thanks. 2013/2/22 Guilherme Russi luisguilherme...@gmail.com Hello Aaron, Here are the outputs. Thanks. Guilherme. 2013/2/21 Aaron Rosen aro...@nicira.com The output to the following would be a good start: quantum net-list quantum port-list ovs-dpctl show (on all nodes) Also make sure the quantum-dhcp-agent is running on your network node. Aaron On Thu, Feb 21, 2013 at 11:23 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Sorry about that, I'm using Folsom release with quantum, I'm installing the controller node and the network node in the same physical machine, I'm following this tutorial: http://docs.openstack.org/folsom/basic-install/content/basic-install_controller.html Which config files do you need? Thanks. Guilherme. 2013/2/21 Aaron Rosen aro...@nicira.com Hi, You'll have to provide more information than this for anyone to help you: i.e are you using quantum or nova-network, if your using quantum which plugin, config files etc. Aaron On Thu, Feb 21, 2013 at 11:13 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello guys, I'm getting problem in my VMs' creation, they don't get IP, the log piece shows: Starting network... udhcpc (v1.18.5) started Sending discover... Sending discover... Sending discover... No lease, failing WARN: /etc/rc3.d/S40-network failed Do you have any idea how I can solve it? Thank you so much. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] VM doesnt get IP
Hello Aaron, Sorry about attaching the infos, about the quantum agent, is it the quantum-plugin-openvswitch-agent? If i was, the job is already ruunning at the controller and the compute nodes: service quantum-plugin-openvswitch-agent start start: Job is already running: quantum-plugin-openvswitch-agent Is there another thing i should do? I'm running my controller node and the network node at the same machine with 2 NICs, maybe can be a problem how i am making my network config? Thanks again. Guilherme. 2013/2/22 Aaron Rosen aro...@nicira.com Hi Guilherme, (next time please paste these in the email rather than attaching, thx). From the text in the attachment (show below). It seems like you are not running the quantum-openvswitch-agent on your network node as there is no GRE tunnel from that to your compute node. Once you have quantum-openvswitch-agent running on all your machines you should be able to run ovs-dpctl looking under br-tun and see a tunnel between each host. Aaron CONTROLLER + NETWORK NODE: system@br-tun: lookups: hit:0 missed:0 lost:0 flows: 0 port 0: br-tun (internal) port 1: patch-int (patch: peer=patch-tun) system@br-int: lookups: hit:0 missed:0 lost:0 flows: 0 port 0: br-int (internal) port 1: tap817d2f70-a0 (internal) port 2: qr-ea64e9aa-31 (internal) port 3: patch-tun (patch: peer=patch-int) system@br-ex: lookups: hit:0 missed:0 lost:0 flows: 0 port 0: br-ex (internal) port 2: qg-95fe3fa1-d1 (internal) COMPUTE NODES COMPUTE NODE 01: ovs-dpctl show system@br-int: lookups: hit:380 missed:7590 lost:0 flows: 0 port 0: br-int (internal) port 2: patch-tun (patch: peer=patch-int) port 3: qvo981ae82e-d4 port 6: qvoc9df3a96-5f port 7: qvoc153ac28-ae port 8: qvo722a5d05-e4 system@br-tun: lookups: hit:381 missed:7589 lost:0 flows: 0 port 0: br-tun (internal) port 1: patch-int (patch: peer=patch-tun) port 2: gre-1 (gre: key=flow, remote_ip=10.10.10.1) On Fri, Feb 22, 2013 at 8:47 AM, Guilherme Russi luisguilherme...@gmail.com wrote: So guys, any idea about what am i missing? Thanks. 2013/2/22 Guilherme Russi luisguilherme...@gmail.com Hello Aaron, Here are the outputs. Thanks. Guilherme. 2013/2/21 Aaron Rosen aro...@nicira.com The output to the following would be a good start: quantum net-list quantum port-list ovs-dpctl show (on all nodes) Also make sure the quantum-dhcp-agent is running on your network node. Aaron On Thu, Feb 21, 2013 at 11:23 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Sorry about that, I'm using Folsom release with quantum, I'm installing the controller node and the network node in the same physical machine, I'm following this tutorial: http://docs.openstack.org/folsom/basic-install/content/basic-install_controller.html Which config files do you need? Thanks. Guilherme. 2013/2/21 Aaron Rosen aro...@nicira.com Hi, You'll have to provide more information than this for anyone to help you: i.e are you using quantum or nova-network, if your using quantum which plugin, config files etc. Aaron On Thu, Feb 21, 2013 at 11:13 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello guys, I'm getting problem in my VMs' creation, they don't get IP, the log piece shows: Starting network... udhcpc (v1.18.5) started Sending discover... Sending discover... Sending discover... No lease, failing WARN: /etc/rc3.d/S40-network failed Do you have any idea how I can solve it? Thank you so much. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] VM does not get IP address
Hello Lukas,
We can share our problems at the same thread, i saw a post of yours there
and, apparently, we have the same problem with the VM's IP.
Regards.
Guilherme.
2013/2/22 Salvatore Orlando sorla...@nicira.com
The other thread currently active at the moment is titled [Openstack]
VM doesnt get IP.
Aaron Rosen, Quantum core developer, is assisting a member of the
community who's apparently having exactly the same problem as you are.
Please note that 169.254.169.254 is the metadata address. In order for
metadata access to work, with the Folsom Quantum release, you also
need to create a Quantum router and connect your network to it (and,
of course, ensure the l3-agent is running with the appropriate IP and
port configured for the metadata server).
Salvatore
On 22 February 2013 19:08, Anil Vishnoi vishnoia...@gmail.com wrote:
Hi Lukas,
There few threads on openstack mailing list where people discussed this
issue. You can search with wget: can't connect to remote host
(169.254.169.254): Network is unreachable and you will see most of those
threads. These threads will give you some insight on how to debug this
issue
to find the root cause. If you get stuck and have queries please feel
free
to drop a mail to the list.
Anil
On Fri, Feb 22, 2013 at 2:57 PM, Lukáš Vízner lukasviz...@gmail.com
wrote:
Hi,
I am following this manual
https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/cbc6c95e749dea86fb4c77fcbf485e55c37a297d/OpenStack_Folsom_Install_Guide_WebVersion.rst
to install OpenStack Folsom
I have created one tenant net called net1. When I launch an
instance, there is this error:
nitializing random number generator... done.
Starting network...
udhcpc (v1.18.5) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
WARN: /etc/rc3.d/S40-network failed
cloud-setup: checking
http://169.254.169.254/2009-04-04/meta-data/instance-id
wget: can't connect to remote host (169.254.169.254): Network is
unreachable
cloud-setup: failed 1/30: up 10.09. request failed
wget: can't connect to remote host (169.254.169.254): Network is
unreachable
cloud-setup: failed 2/30: up 11.10. request failed
wget: can't connect to remote host (169.254.169.254): Network is
unreachable
Here are outputs:
root@folsom-controller:/etc/init.d# quantum net-list
+--+--+--+
| id | name | subnets
|
+--+--+--+
| 3c2eed52-969b-44a2-bd33-790999c5da5c | net1 |
a82109bf-5777-4730-b44a-5dceebc835cb |
+--+--+--+
root@folsom-controller:/etc/init.d#quantum port-list
+--+--+---+-+
| id | name | mac_address |
fixed_ips
|
+--+--+---+-+
| 0a410916-ce92-4d41-9085-1358f6493269 | | fa:16:3e:4e:d9:40 |
{subnet_id: a82109bf-5777-4730-b44a-5dceebc835cb, ip_address:
10.5.5.2} |
| eea126e8-8661-4d55-b3e0-655d758a9203 | | fa:16:3e:ff:7e:ab |
{subnet_id: a82109bf-5777-4730-b44a-5dceebc835cb, ip_address:
10.5.5.1} |
+--+--+---+-+
Please could you help me solve this problem?
What configuration files do you need?
Thank you!!!
--
Lukáš Vízner
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help : https://help.launchpad.net/ListHelp
--
Thanks
Anil
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help : https://help.launchpad.net/ListHelp
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help : https://help.launchpad.net/ListHelp
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help : https://help.launchpad.net/ListHelp
Re: [Openstack] VM doesnt get IP
= True # (ListOpt) Comma-separated list of tun_min:tun_max tuples # enumerating ranges of GRE tunnel IDs that are available for tenant # network allocation if tenant_network_type is 'gre'. # # Default: tunnel_id_ranges = # Example: tunnel_id_ranges = 1:1000 tunnel_id_ranges = 1:1000 # Do not change this parameter unless you have a good reason to. # This is the name of the OVS integration bridge. There is one per hypervisor. # The integration bridge acts as a virtual patch bay. All VM VIFs are # attached to this bridge and then patched according to their network # connectivity. # # Default: integration_bridge = br-int integration_bridge = br-int # Only used for the agent if tunnel_id_ranges (above) is not empty for # the server. In most cases, the default value should be fine. # # Default: tunnel_bridge = br-tun tunnel_bridge = br-tun # Uncomment this line for the agent if tunnel_id_ranges (above) is not # empty for the server. Set local-ip to be the local IP address of # this hypervisor. # # Default: local_ip = 10.0.0.3 local_ip = 192.168.3.3 The 10.10.10.1 is the Data Network from network controller (following the tutorial), and it is in the eth0:0 (I'm not pretty sure, but i guess the data from the VMs should communicate with this IP). 2013/2/22 Aaron Rosen aro...@nicira.com Running with two nics for this should be fine for tunneling as ip routing would handle which nic the packets should go out. From what you pasted I see that one HV has a gre tunnel setup to 10.10.10.1 -- Who is that host? Can you attach your /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini on your nodes. I suspect the issue is a configuration issue in the [OVS] section. You'll need something along the lines of this in that section: [OVS] local_ip = ip address of HV enable_tunneling = True tunnel_id_ranges = 1:1000 tenant_network_type = gre On Fri, Feb 22, 2013 at 9:54 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello Aaron, Sorry about attaching the infos, about the quantum agent, is it the quantum-plugin-openvswitch-agent? If i was, the job is already ruunning at the controller and the compute nodes: service quantum-plugin-openvswitch-agent start start: Job is already running: quantum-plugin-openvswitch-agent Is there another thing i should do? I'm running my controller node and the network node at the same machine with 2 NICs, maybe can be a problem how i am making my network config? Thanks again. Guilherme. 2013/2/22 Aaron Rosen aro...@nicira.com Hi Guilherme, (next time please paste these in the email rather than attaching, thx). From the text in the attachment (show below). It seems like you are not running the quantum-openvswitch-agent on your network node as there is no GRE tunnel from that to your compute node. Once you have quantum-openvswitch-agent running on all your machines you should be able to run ovs-dpctl looking under br-tun and see a tunnel between each host. Aaron CONTROLLER + NETWORK NODE: system@br-tun: lookups: hit:0 missed:0 lost:0 flows: 0 port 0: br-tun (internal) port 1: patch-int (patch: peer=patch-tun) system@br-int: lookups: hit:0 missed:0 lost:0 flows: 0 port 0: br-int (internal) port 1: tap817d2f70-a0 (internal) port 2: qr-ea64e9aa-31 (internal) port 3: patch-tun (patch: peer=patch-int) system@br-ex: lookups: hit:0 missed:0 lost:0 flows: 0 port 0: br-ex (internal) port 2: qg-95fe3fa1-d1 (internal) COMPUTE NODES COMPUTE NODE 01: ovs-dpctl show system@br-int: lookups: hit:380 missed:7590 lost:0 flows: 0 port 0: br-int (internal) port 2: patch-tun (patch: peer=patch-int) port 3: qvo981ae82e-d4 port 6: qvoc9df3a96-5f port 7: qvoc153ac28-ae port 8: qvo722a5d05-e4 system@br-tun: lookups: hit:381 missed:7589 lost:0 flows: 0 port 0: br-tun (internal) port 1: patch-int (patch: peer=patch-tun) port 2: gre-1 (gre: key=flow, remote_ip=10.10.10.1) On Fri, Feb 22, 2013 at 8:47 AM, Guilherme Russi luisguilherme...@gmail.com wrote: So guys, any idea about what am i missing? Thanks. 2013/2/22 Guilherme Russi luisguilherme...@gmail.com Hello Aaron, Here are the outputs. Thanks. Guilherme. 2013/2/21 Aaron Rosen aro...@nicira.com The output to the following would be a good start: quantum net-list quantum port-list ovs-dpctl show (on all nodes) Also make sure the quantum-dhcp-agent is running on your network node. Aaron On Thu, Feb 21, 2013 at 11:23 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Sorry about that, I'm using Folsom release with quantum, I'm installing the controller node and the network node in the same physical machine, I'm following this tutorial: http://docs.openstack.org/folsom/basic-install/content/basic-install_controller.html Which config files do you need? Thanks. Guilherme. 2013/2/21 Aaron Rosen aro...@nicira.com Hi, You'll have to provide more information than this for anyone to help you: i.e are you
[Openstack] Doubt with apt-get
Hello guys, I got a message from my Ubuntu Server 12.04 about upgrade somethings, the upgrades include Linux Headers and some upgrades for openstack's components. My question is, if I apply the upgrades, my openstack system can break off? Thank you. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Cant ping private or floating IP
Hello Chathura, Have succeeded with your network? I'm having problems with mine too. Thanks. Guilherme. 2013/2/17 Chathura M. Sarathchandra Magurawalage 77.chath...@gmail.com Hope you had a good night sleep :) Yes sure I will be on irc. my nickname is chathura77 Thanks On 17 February 2013 13:15, Jean-Baptiste RANSY jean-baptiste.ra...@alyseo.com wrote: ping Are you on IRC ? JB On 02/17/2013 04:07 AM, Jean-Baptiste RANSY wrote: Add Cirros Image to Glance :) Username: cirros Password: cubswin:) http://docs.openstack.org/trunk/openstack-compute/install/apt/content/uploading-to-glance.html to join your VM, it's a bit dirty but you can : - put your computer in the same subnet as your controller (192.168.2.0/24 ) - then adds a static route to the subnet of your VM. (ip route add 10.5.5.0/24 gw 192.168.2.151) (192.168.2.151 is the quantum gateway) I'm going to sleep, we will continue tomorrow. JB PS : You also should get some sleep :) On 02/17/2013 03:53 AM, Chathura M. Sarathchandra Magurawalage wrote: oh that's weird. I still get this error. couldnt this be because I cannot ping the VM in the first place?. Because as far as I know metadata takes care of ssh keys. But what if you cant reach the VM in the first place? no instance data found in start-local ci-info: lo: 1 127.0.0.1 255.0.0.0 . ci-info: eth0 : 1 10.5.5.3255.255.255.0 fa:16:3e:a7:28:25 ci-info: route-0: 0.0.0.0 10.5.5.10.0.0.0 eth0 UG ci-info: route-1: 10.5.5.00.0.0.0 255.255.255.0 eth0 U cloud-init start running: Sun, 17 Feb 2013 02:45:35 +. up 3.51 seconds 2013-02-17 02:48:25,840 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [50/120s]: url error [timed out] 2013-02-17 02:49:16,893 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [101/120s]: url error [timed out] 2013-02-17 02:49:34,912 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [119/120s]: url error [timed out] 2013-02-17 02:49:35,913 - DataSourceEc2.py[CRITICAL]: giving up on md after 120 seconds no instance data found in start Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles [80G [74G[ OK ] On 17 February 2013 02:41, Jean-Baptiste RANSY jean-baptiste.ra...@alyseo.com wrote: For me, it's normal that you are not able to curl 169.254.169.254 from your compute and controller nodes : Same thing on my side, but my VM get their metadata. Try to lunch an instance. JB On 02/17/2013 03:35 AM, Chathura M. Sarathchandra Magurawalage wrote: root@computernode:~# curl -v http://169.254.169.254 * About to connect() to 169.254.169.254 port 80 (#0) * Trying 169.254.169.254... root@controller:~# curl -v http://169.254.169.254 * About to connect() to 169.254.169.254 port 80 (#0) * Trying 169.254.169.254... root@athena:~# iptables -L -n -v Chain INPUT (policy ACCEPT 59009 packets, 22M bytes) pkts bytes target prot opt in out source destination 59493 22M quantum-l3-agent-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 59493 22M nova-api-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 484 73533 ACCEPT 47 -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 707 packets, 47819 bytes) pkts bytes target prot opt in out source destination 707 47819 quantum-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 707 47819 quantum-l3-agent-FORWARD all -- * * 0.0.0.0/0 0.0.0.0/0 707 47819 nova-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 707 47819 nova-api-FORWARD all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 56022 packets, 22M bytes) pkts bytes target prot opt in out source destination 56022 22M quantum-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 56022 22M quantum-l3-agent-OUTPUT all -- * * 0.0.0.0/0 0.0.0.0/0 56022 22M nova-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 56022 22M nova-api-OUTPUT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain nova-api-FORWARD (1 references) pkts bytes target prot opt in out source destination Chain nova-api-INPUT (1 references) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- * * 0.0.0.0/0 192.168.2.225tcp dpt:8775 Chain nova-api-OUTPUT (1 references) pkts bytes target prot opt in out source destination Chain nova-api-local (1 references) pkts bytes target prot opt in out source destination Chain nova-filter-top (2 references) pkts bytes target prot opt in out source destination 56729 22M nova-api-local all -- * *
Re: [Openstack] Cant ping private or floating IP
How did you install your controller node? I mean, mine I have 2 NICs and I installed the network node at the same physical machine. 2013/2/18 Chathura M. Sarathchandra Magurawalage 77.chath...@gmail.com Hello Guilherme, No, I am still having the problem :( On 18 February 2013 13:01, Guilherme Russi luisguilherme...@gmail.comwrote: Hello Chathura, Have succeeded with your network? I'm having problems with mine too. Thanks. Guilherme. 2013/2/17 Chathura M. Sarathchandra Magurawalage 77.chath...@gmail.com Hope you had a good night sleep :) Yes sure I will be on irc. my nickname is chathura77 Thanks On 17 February 2013 13:15, Jean-Baptiste RANSY jean-baptiste.ra...@alyseo.com wrote: ping Are you on IRC ? JB On 02/17/2013 04:07 AM, Jean-Baptiste RANSY wrote: Add Cirros Image to Glance :) Username: cirros Password: cubswin:) http://docs.openstack.org/trunk/openstack-compute/install/apt/content/uploading-to-glance.html to join your VM, it's a bit dirty but you can : - put your computer in the same subnet as your controller ( 192.168.2.0/24) - then adds a static route to the subnet of your VM. (ip route add 10.5.5.0/24 gw 192.168.2.151) (192.168.2.151 is the quantum gateway) I'm going to sleep, we will continue tomorrow. JB PS : You also should get some sleep :) On 02/17/2013 03:53 AM, Chathura M. Sarathchandra Magurawalage wrote: oh that's weird. I still get this error. couldnt this be because I cannot ping the VM in the first place?. Because as far as I know metadata takes care of ssh keys. But what if you cant reach the VM in the first place? no instance data found in start-local ci-info: lo: 1 127.0.0.1 255.0.0.0 . ci-info: eth0 : 1 10.5.5.3255.255.255.0 fa:16:3e:a7:28:25 ci-info: route-0: 0.0.0.0 10.5.5.10.0.0.0 eth0 UG ci-info: route-1: 10.5.5.00.0.0.0 255.255.255.0 eth0 U cloud-init start running: Sun, 17 Feb 2013 02:45:35 +. up 3.51 seconds 2013-02-17 02:48:25,840 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [50/120s]: url error [timed out] 2013-02-17 02:49:16,893 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [101/120s]: url error [timed out] 2013-02-17 02:49:34,912 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [119/120s]: url error [timed out] 2013-02-17 02:49:35,913 - DataSourceEc2.py[CRITICAL]: giving up on md after 120 seconds no instance data found in start Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles [80G [74G[ OK ] On 17 February 2013 02:41, Jean-Baptiste RANSY jean-baptiste.ra...@alyseo.com wrote: For me, it's normal that you are not able to curl 169.254.169.254 from your compute and controller nodes : Same thing on my side, but my VM get their metadata. Try to lunch an instance. JB On 02/17/2013 03:35 AM, Chathura M. Sarathchandra Magurawalage wrote: root@computernode:~# curl -v http://169.254.169.254 * About to connect() to 169.254.169.254 port 80 (#0) * Trying 169.254.169.254... root@controller:~# curl -v http://169.254.169.254 * About to connect() to 169.254.169.254 port 80 (#0) * Trying 169.254.169.254... root@athena:~# iptables -L -n -v Chain INPUT (policy ACCEPT 59009 packets, 22M bytes) pkts bytes target prot opt in out source destination 59493 22M quantum-l3-agent-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 59493 22M nova-api-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 484 73533 ACCEPT 47 -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 707 packets, 47819 bytes) pkts bytes target prot opt in out source destination 707 47819 quantum-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 707 47819 quantum-l3-agent-FORWARD all -- * * 0.0.0.0/00.0.0.0/0 707 47819 nova-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 707 47819 nova-api-FORWARD all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 56022 packets, 22M bytes) pkts bytes target prot opt in out source destination 56022 22M quantum-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 56022 22M quantum-l3-agent-OUTPUT all -- * * 0.0.0.0/0 0.0.0.0/0 56022 22M nova-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 56022 22M nova-api-OUTPUT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain nova-api-FORWARD (1 references) pkts bytes target prot opt in out source destination Chain nova-api-INPUT (1 references) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- * * 0.0.0.0/0 192.168.2.225tcp dpt:8775 Chain nova
Re: [Openstack] Cant ping private or floating IP
Got it, I have one virtual interface too, to make the management and VM conf part. If you find anything, let me know, please. Thanks. 2013/2/18 Chathura M. Sarathchandra Magurawalage 77.chath...@gmail.com I have only got 1 NIC but got two virtual interface for two different networks. I have got network node in the same physical machine too. On 18 February 2013 13:15, Guilherme Russi luisguilherme...@gmail.comwrote: How did you install your controller node? I mean, mine I have 2 NICs and I installed the network node at the same physical machine. 2013/2/18 Chathura M. Sarathchandra Magurawalage 77.chath...@gmail.com Hello Guilherme, No, I am still having the problem :( On 18 February 2013 13:01, Guilherme Russi luisguilherme...@gmail.comwrote: Hello Chathura, Have succeeded with your network? I'm having problems with mine too. Thanks. Guilherme. 2013/2/17 Chathura M. Sarathchandra Magurawalage 77.chath...@gmail.com Hope you had a good night sleep :) Yes sure I will be on irc. my nickname is chathura77 Thanks On 17 February 2013 13:15, Jean-Baptiste RANSY jean-baptiste.ra...@alyseo.com wrote: ping Are you on IRC ? JB On 02/17/2013 04:07 AM, Jean-Baptiste RANSY wrote: Add Cirros Image to Glance :) Username: cirros Password: cubswin:) http://docs.openstack.org/trunk/openstack-compute/install/apt/content/uploading-to-glance.html to join your VM, it's a bit dirty but you can : - put your computer in the same subnet as your controller ( 192.168.2.0/24) - then adds a static route to the subnet of your VM. (ip route add 10.5.5.0/24 gw 192.168.2.151) (192.168.2.151 is the quantum gateway) I'm going to sleep, we will continue tomorrow. JB PS : You also should get some sleep :) On 02/17/2013 03:53 AM, Chathura M. Sarathchandra Magurawalage wrote: oh that's weird. I still get this error. couldnt this be because I cannot ping the VM in the first place?. Because as far as I know metadata takes care of ssh keys. But what if you cant reach the VM in the first place? no instance data found in start-local ci-info: lo: 1 127.0.0.1 255.0.0.0 . ci-info: eth0 : 1 10.5.5.3255.255.255.0 fa:16:3e:a7:28:25 ci-info: route-0: 0.0.0.0 10.5.5.10.0.0.0 eth0 UG ci-info: route-1: 10.5.5.00.0.0.0 255.255.255.0 eth0 U cloud-init start running: Sun, 17 Feb 2013 02:45:35 +. up 3.51 seconds 2013-02-17 02:48:25,840 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [50/120s]: url error [timed out] 2013-02-17 02:49:16,893 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [101/120s]: url error [timed out] 2013-02-17 02:49:34,912 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [119/120s]: url error [timed out] 2013-02-17 02:49:35,913 - DataSourceEc2.py[CRITICAL]: giving up on md after 120 seconds no instance data found in start Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles [80G [74G[ OK ] On 17 February 2013 02:41, Jean-Baptiste RANSY jean-baptiste.ra...@alyseo.com wrote: For me, it's normal that you are not able to curl 169.254.169.254 from your compute and controller nodes : Same thing on my side, but my VM get their metadata. Try to lunch an instance. JB On 02/17/2013 03:35 AM, Chathura M. Sarathchandra Magurawalage wrote: root@computernode:~# curl -v http://169.254.169.254 * About to connect() to 169.254.169.254 port 80 (#0) * Trying 169.254.169.254... root@controller:~# curl -v http://169.254.169.254 * About to connect() to 169.254.169.254 port 80 (#0) * Trying 169.254.169.254... root@athena:~# iptables -L -n -v Chain INPUT (policy ACCEPT 59009 packets, 22M bytes) pkts bytes target prot opt in out source destination 59493 22M quantum-l3-agent-INPUT all -- * * 0.0.0.0/00.0.0.0/0 59493 22M nova-api-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 484 73533 ACCEPT 47 -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 707 packets, 47819 bytes) pkts bytes target prot opt in out source destination 707 47819 quantum-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 707 47819 quantum-l3-agent-FORWARD all -- * * 0.0.0.0/00.0.0.0/0 707 47819 nova-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 707 47819 nova-api-FORWARD all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 56022 packets, 22M bytes) pkts bytes target prot opt in out source destination 56022 22M quantum-filter-top all -- * * 0.0.0.0/0 0.0.0.0/0 56022 22M quantum-l3-agent-OUTPUT all -- * * 0.0.0.0/00.0.0.0/0 56022 22M
Re: [Openstack] Doubt with apt-get
Thanks for the support guys. The way is keep a backup :) 2013/2/18 Razique Mahroua razique.mahr...@gmail.com That what I would say also - never sure. Dump your database and save your configuration files, depending on when you run an upgrade for the last time :) *Razique Mahroua** - **Nuage Co* razique.mahr...@gmail.com Tel : +33 9 72 37 94 15 Le 18 févr. 2013 à 20:05, Aaron Rosen aro...@nicira.com a écrit : Anything is possible with upgrading but hopefully not :P On Mon, Feb 18, 2013 at 4:18 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello guys, I got a message from my Ubuntu Server 12.04 about upgrade somethings, the upgrades include Linux Headers and some upgrades for openstack's components. My question is, if I apply the upgrades, my openstack system can break off? Thank you. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp NUAGECO-LOGO-Fblan_petit.jpg___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Cant ping private or floating IP
Hello guys, I got the same problem, I have enabled the SSH and Ping policies, when I type sudo ifconfig -a inside my VM (Through VNC) the only IP showed is the lo IP. What am I missing? Regards. Guilherme. 2013/2/15 Jean-Baptiste RANSY jean-baptiste.ra...@alyseo.com Hello Chathura; It's normal that your compute node have no route to the tenant network. Quantum and openvswitch provide Layer2 link and as i can see, the VM obtain a IP address. So we can assume that quantum and openvswitch are setup correctly. Same question as JuanFra : Have you enabled PING and SSH in 'Access and security policies'? Other things : Cloud-init (in VM) is unable to retrive metadata, does nova-api-metadata is running on your Compute Node ? If yes, check you nova.conf. Regards, Jean-Baptiste RANSY On 02/14/2013 11:58 PM, Chathura M. Sarathchandra Magurawalage wrote: Hello, I followed the folsom basic install instructions in http://docs.openstack.org/folsom/basic-install/content/basic-install_operate.html But now I am not able to ping either the private or the floating ip of the instances. Can someone please help? Instance log: [0.00] Initializing cgroup subsys cpuset [0.00] Initializing cgroup subsys cpu [0.00] Linux version 3.2.0-37-virtual (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #58-Ubuntu SMP Thu Jan 24 15:48:03 UTC 2013 (Ubuntu 3.2.0-37.58-virtual 3.2.35) [0.00] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-37-virtual root=LABEL=cloudimg-rootfs ro console=ttyS0 [0.00] KERNEL supported cpus: [0.00] Intel GenuineIntel [0.00] AMD AuthenticAMD [0.00] Centaur CentaurHauls [0.00] BIOS-provided physical RAM map: [0.00] BIOS-e820: - 0009bc00 (usable) [0.00] BIOS-e820: 0009bc00 - 000a (reserved) [0.00] BIOS-e820: 000f - 0010 (reserved) [0.00] BIOS-e820: 0010 - 7fffd000 (usable) [0.00] BIOS-e820: 7fffd000 - 8000 (reserved) [0.00] BIOS-e820: feffc000 - ff00 (reserved) [0.00] BIOS-e820: fffc - 0001 (reserved) [0.00] NX (Execute Disable) protection: active [0.00] DMI 2.4 present. [0.00] No AGP bridge found [0.00] last_pfn = 0x7fffd max_arch_pfn = 0x4 [0.00] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [0.00] found SMP MP-table at [880fdae0] fdae0 [0.00] init_memory_mapping: -7fffd000 [0.00] RAMDISK: 3776c000 - 37bae000 [0.00] ACPI: RSDP 000fd980 00014 (v00 BOCHS ) [0.00] ACPI: RSDT 7fffd7b0 00034 (v01 BOCHS BXPCRSDT 0001 BXPC 0001) [0.00] ACPI: FACP 7f80 00074 (v01 BOCHS BXPCFACP 0001 BXPC 0001) [0.00] ACPI: DSDT 7fffd9b0 02589 (v01 BXPC BXDSDT 0001 INTL 20100528) [0.00] ACPI: FACS 7f40 00040 [0.00] ACPI: SSDT 7fffd910 0009E (v01 BOCHS BXPCSSDT 0001 BXPC 0001) [0.00] ACPI: APIC 7fffd830 00072 (v01 BOCHS BXPCAPIC 0001 BXPC 0001) [0.00] ACPI: HPET 7fffd7f0 00038 (v01 BOCHS BXPCHPET 0001 BXPC 0001) [0.00] No NUMA configuration found [0.00] Faking a node at -7fffd000 [0.00] Initmem setup node 0 -7fffd000 [0.00] NODE_DATA [7fff8000 - 7fffcfff] [0.00] kvm-clock: Using msrs 4b564d01 and 4b564d00 [0.00] kvm-clock: cpu 0, msr 0:1cf7681, boot clock [0.00] Zone PFN ranges: [0.00] DMA 0x0010 - 0x1000 [0.00] DMA320x1000 - 0x0010 [0.00] Normal empty [0.00] Movable zone start PFN for each node [0.00] early_node_map[2] active PFN ranges [0.00] 0: 0x0010 - 0x009b [0.00] 0: 0x0100 - 0x0007fffd [0.00] ACPI: PM-Timer IO Port: 0xb008 [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: IOAPIC (id[0x01] address[0xfec0] gsi_base[0]) [0.00] IOAPIC[0]: apic_id 1, version 17, address 0xfec0, GSI 0-23 [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [0.00] Using ACPI (MADT) for SMP configuration information [0.00] ACPI: HPET id: 0x8086a201 base: 0xfed0 [0.00] SMP: Allowing 1 CPUs, 0 hotplug
Re: [Openstack] Fwd: [Question #221283]: VM instance is not able to get IP address
I'm getting a similar problem in my deploy. If someone could help, I appreciate it. Regards. Guilherme. 2013/2/8 Anil Vishnoi vishnoia...@gmail.com Hi All, I posted below question on launchpad -quantum, but i didn't get any response from the team, may be its not that active as openstack mailing list. I am facing an issue detailed in this question [ https://answers.launchpad.net/quantum/+question/221283] and did some analysis and shared it on the same question. You can find my analysis in the below mail as well. I am looking for suggestion from the openstack networking expert on how to further debug this issue. My deployment is stuck because of this issue. I really appreciate your help. Thanks Anil -- Forwarded message -- From: Anil Vishnoi question221...@answers.launchpad.net Date: Fri, Feb 8, 2013 at 3:41 AM Subject: Re: [Question #221283]: VM instance is not able to get IP address To: vishnoia...@gmail.com Your question #221283 on quantum changed: https://answers.launchpad.net/quantum/+question/221283 You gave more information on the question: Hi Team, I further debugged this issue, and figure out one workaround. I really don't want to say it a workaround but moreover its a hack. As i mentioned in the above description that because of the action=drop, DHCP packets were getting dropped and not reaching to the DHCP agent, and hence it was not able to respond with the DHCPOFFER response. First i resolve this error [Feb 07 17:32:40|1|netdev_linux|WARN|/sys/class/net/tap9fdb5c15-26/carrier: open failed: ] with the following steps : 1. disable the network namespace for l3_agent and dhcp agent by modifying the use_namespace=false in the respective configuration file. 2. Delete the port (tap9fdb5c15-26) from the br-int bridge. [Quick instructions : root@management:~# ovs-vsctl del-port tap9fdb5c15-26 root@management:~# ovs-vsctl add-port br-int tap9fdb5c15-26 root@management:~# ovs-vsctl set port tap9fdb5c15-26 tag=1 root@management:~# ovs-vsctl set Interface tap9fdb5c15-26 type=internal ] 3. Restart both the services and it will create tap devices outside the network name space. If network namespace is enabled, ifconfig will not show this tap device in its output, but if you fire command 'ip netns exec dhcpns ip -d link' it will show you the device. In my setup i followed the above step, but even if you don't want to disable namespace, you can stop dhcp agent, delete the port from br-int and restart the service. It possibly will resolve this error ( it did worked in my setup). So in my setup, namespace is disabled. And following is the output of ovs-dpctl root@management:~# ovs-dpctl show system@br-eth1: lookups: hit:151651 missed:37759 lost:0 flows: 3 port 0: br-eth1 (internal) port 1: eth1 port 3: phy-br-eth1 system@br-int: lookups: hit:1183 missed:23283 lost:0 flows: 1 port 0: br-int (internal) port 6: tap9fdb5c15-26 (internal) port 7: int-br-eth1 system@br-ex: lookups: hit:96895 missed:67156 lost:0 flows: 16 port 0: br-ex (internal) port 1: eth0 DHCP request packet is broadcast packet and it takes following path to reach the br-intport 1: eth1 (br-eth1) -- port 7: int-br-eth1(br- int) and this packet gets drop here because of the following rule installed on br-int bridge cookie=0x0, duration=11422.615s, table=0, n_packets=16711, n_bytes=1178562, priority=2,in_port=7 actions=drop Ideally it should be forwarded to port 6: tap9fdb5c15-26 (internal) (br- int) and that way it can reach DHCP agent. So i modified above flow to following flow cookie=0x0, duration=3169.501s, table=0, n_packets=2562, n_bytes=228241, priority=2,in_port=7 actions=output:6 and also installed following rule to route back the DHCPOFFER packet cookie=0x0, duration=4536.551s, table=0, n_packets=233, n_bytes=28896, priority=2,in_port=6 actions=output:7 So after installing these two flow rules, DHCP agent got the request and responded with the DHCPOFFER response. root@management:~# tail -f /var/log/syslog Feb 8 03:26:16 management dnsmasq-dhcp[25811]: DHCPREQUEST(tap9fdb5c15-26) 192.168.0.3 fa:16:3e:93:74:73 Feb 8 03:26:16 management dnsmasq-dhcp[25811]: DHCPACK(tap9fdb5c15-26) 192.168.0.3 fa:16:3e:93:74:73 192-168-0-3 DHCP response packet will take following path port 6: tap9fdb5c15-26 (internal)(br-int) --- port 7: int-br-eth1(br-int) --- port 3: phy-br- eth1 (br-eth1) --- port 1: eth1 (br-eth1) and that way this packet will go out of controller node. But on br-eth1 bridge another rule was installed which was dropping the response cookie=0x0, duration=2669.22s, table=0, n_packets=173, n_bytes=18144, priority=2,in_port=3 actions=drop and i changed this flow to cookie=0x0, duration=2669.22s, table=0, n_packets=173, n_bytes=18144, priority=2,in_port=3 actions=output:1
[Openstack] VM doesn't attach IP
Hello guys, My VMs are not attaching IP address, I've been look the VM's log but I can't realize what is going on. I'm sending my VM's log. Can anybody help me, please? Regards. Guilherme. LogVM Description: Binary data ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] VM doesn't attach IP
Hi Anil, I'm trying to find something to fix it, are you using quantum or nova-network? I'm working with quantum, I have one physical computer with 2 NICs that is the controller and another 4 physical computers with 2 NICs each that are the node compute, I left the Network node with the Controller node, at the same physical compute. Regards. Guilherme. 2013/2/7 Anil Vishnoi vishnoia...@gmail.com Hi Guilherme, I reported the same issue just a moment ago here : https://answers.launchpad.net/quantum/+question/221283 I think we are facing the same issue here- atleast VM logs shows. Anil On Thu, Feb 7, 2013 at 5:14 PM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello guys, My VMs are not attaching IP address, I've been look the VM's log but I can't realize what is going on. I'm sending my VM's log. Can anybody help me, please? Regards. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp -- Thanks Regards --Anil Kumar Vishnoi ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] VM doesn't attach IP
By the way, I'm look your post and I saw some things that I don't have at the ifconfig, like this part: br-eth1 Link encap:Ethernet HWaddr 00:11:25:8e:a8:2d inet addr:10.10.3.1 Bcast:10.10.255.255 Mask:255.255.0.0 inet6 addr: fe80::211: br-ex Link encap:Ethernet HWaddr 00:11:25:8e:a8:2c inet addr:9.126.108.143 Bcast:9.126.108.255 Mask:255.255.255.0 inet6 addr: fe80::211:25ff:fe8e:a82c/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:435547 errors:0 dropped:16395 overruns:0 frame:0 TX packets:156208 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46251450 (46.2 MB) TX bytes:135765850 (135.7 MB) How did you created these br-* with IP? Guilherme. 2013/2/7 Guilherme Russi luisguilherme...@gmail.com Hi Anil, I'm trying to find something to fix it, are you using quantum or nova-network? I'm working with quantum, I have one physical computer with 2 NICs that is the controller and another 4 physical computers with 2 NICs each that are the node compute, I left the Network node with the Controller node, at the same physical compute. Regards. Guilherme. 2013/2/7 Anil Vishnoi vishnoia...@gmail.com Hi Guilherme, I reported the same issue just a moment ago here : https://answers.launchpad.net/quantum/+question/221283 I think we are facing the same issue here- atleast VM logs shows. Anil On Thu, Feb 7, 2013 at 5:14 PM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello guys, My VMs are not attaching IP address, I've been look the VM's log but I can't realize what is going on. I'm sending my VM's log. Can anybody help me, please? Regards. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp -- Thanks Regards --Anil Kumar Vishnoi ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
[Openstack] Problem starting a VM
Hello friends, I am getting problem when I try to start a VM, it keeps ate Scheduling task and doesn't start the VM. It is happining after I made a apt-get update and apt-get upgrade. I really don't know what to do, anybody can help me, please? Thank you. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Problem starting a VM
Hello Roni, thank you for returning, I don't understand the logs yet, I'm working with that, but here is a piece of my nova-compute.log: 2013-02-05 10:11:07 11592 DEBUG nova.utils [-] Got semaphore compute_resources for method update_available_resource... inner /usr/lib/python2.7/dist-packages/nova/utils.py:721 2013-02-05 10:11:12 11592 DEBUG nova.compute.resource_tracker [-] Hypervisor: free ram (MB): 7136 _report_hypervisor_resource_view /usr/lib/python2.7/dist-packages/nova/compute/resource_tracker.py:470 2013-02-05 10:11:12 11592 DEBUG nova.compute.resource_tracker [-] Hypervisor: free disk (GB): 88 _report_hypervisor_resource_view /usr/lib/python2.7/dist-packages/nova/compute/resource_tracker.py:471 2013-02-05 10:11:12 11592 DEBUG nova.compute.resource_tracker [-] Hypervisor: free VCPUs: 4 _report_hypervisor_resource_view /usr/lib/python2.7/dist-packages/nova/compute/resource_tracker.py:476 2013-02-05 10:11:12 11592 AUDIT nova.compute.resource_tracker [-] Free ram (MB): 7354 2013-02-05 10:11:12 11592 AUDIT nova.compute.resource_tracker [-] Free disk (GB): 93 2013-02-05 10:11:12 11592 AUDIT nova.compute.resource_tracker [-] Free VCPUS: 4 2013-02-05 10:11:12 11592 INFO nova.compute.resource_tracker [-] Compute_service record updated for tiresias 2013-02-05 10:11:12 11592 DEBUG nova.manager [-] Running periodic task ComputeManager._poll_rebooting_instances periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-02-05 10:11:12 11592 DEBUG nova.manager [-] Skipping ComputeManager._cleanup_running_deleted_instances, 4 ticks left until next run periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:167 2013-02-05 10:11:12 11592 DEBUG nova.manager [-] Running periodic task ComputeManager._check_instance_build_time periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-02-05 10:11:12 11592 DEBUG nova.manager [-] Running periodic task ComputeManager._heal_instance_info_cache periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-02-05 10:11:12 11592 DEBUG nova.manager [-] Running periodic task ComputeManager._run_image_cache_manager_pass periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-02-05 10:11:12 11592 DEBUG nova.manager [-] Running periodic task ComputeManager._reclaim_queued_deletes periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-02-05 10:11:12 11592 DEBUG nova.compute.manager [-] FLAGS.reclaim_instance_interval = 0, skipping... _reclaim_queued_deletes /usr/lib/python2.7/dist-packages/nova/compute/manager.py:2790 2013-02-05 10:11:12 11592 DEBUG nova.manager [-] Running periodic task ComputeManager._report_driver_status periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 2013-02-05 10:11:12 11592 INFO nova.compute.manager [-] Updating host status 2013-02-05 10:11:12 11592 DEBUG nova.virt.libvirt.driver [-] Updating host stats update_status /usr/lib/python2.7/dist-packages/nova/virt/libvirt/driver.py:3063 2013-02-05 10:11:18 11592 DEBUG nova.manager [-] Running periodic task ComputeManager._poll_unconfirmed_resizes periodic_tasks /usr/lib/python2.7/dist-packages/nova/manager.py:172 Regards. Guilherme. 2013/2/5 Ronivon Costa ronivon.co...@gmail.com Have you looked the compute.log file? You should really start from there. :D Also, if you really expect some help, you must provide some information. Search in the logs for clues, and if it can't help or you don't understand what you see, then send it along as well. Roni. No dia 5 de Fev de 2013 11:59, Guilherme Russi luisguilherme...@gmail.com escreveu: Hello friends, I am getting problem when I try to start a VM, it keeps ate Scheduling task and doesn't start the VM. It is happining after I made a apt-get update and apt-get upgrade. I really don't know what to do, anybody can help me, please? Thank you. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Problem starting a VM
I found a solution, I guess, well, I droped the tables from quantum and create a network range again, and it worked again. Now I'm trying to figure out how to insert a floating IP to ssh and ping in my VMs. Do you have any ideas? I can login in the VM, but when I type sudo ifconfig -a it has no IP. Thank you all. Guilherme. 2013/2/5 Pranav pps.pra...@gmail.com I believe that you have broken your configuration files. Please do make sure that your nova confi files are proper. I had similar issue where in i had to change the libvirt option to QEMU because some KVM issue and the images started spawning. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Problem starting a VM
Guys, I'm trying to create the network to connect my VMs, but they don't receive the IP, my network configs in the controller node is: # eth1 - link external with the internet address 10.3.77.51 # eth0 - link internal to connect the compute nodes address 192.168.3.1 And in my compute note I have: # eth1 - link external with the internet address 10.3.77.52 # eth0 - link internal to connect to the cloud address 192.168.3.2 What am I doing wrong? Regards. Guilherme. 2013/2/5 Guilherme Russi luisguilherme...@gmail.com I found a solution, I guess, well, I droped the tables from quantum and create a network range again, and it worked again. Now I'm trying to figure out how to insert a floating IP to ssh and ping in my VMs. Do you have any ideas? I can login in the VM, but when I type sudo ifconfig -a it has no IP. Thank you all. Guilherme. 2013/2/5 Pranav pps.pra...@gmail.com I believe that you have broken your configuration files. Please do make sure that your nova confi files are proper. I had similar issue where in i had to change the libvirt option to QEMU because some KVM issue and the images started spawning. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Problem with IP on VMs
Hello Lei, When I use the command nova secgroup-list-rules, it returns: usage: nova secgroup-list-rules secgroup error: too few arguments What must I insert with the command, the secgroup name? But I haven't created an secgroup. Regards. Guilherme. 2013/1/31 Lei Zhang zhang.lei@gmail.com check list - login the vm through vnc, and check whether it get IP? - login in the vm from the host machine to check whether the IP is works - check the secgroup using command nova secgroup-list-rules On Thu, Jan 31, 2013 at 8:20 AM, Guilherme Russi luisguilherme...@gmail.com wrote: No, how can I do that? Thank you. 2013/1/30 Rain Li lyp20062...@gmail.com Have you setup the secgroup rules? On Wed, Jan 30, 2013 at 2:02 PM, Ritesh Nanda riteshnand...@gmail.comwrote: Can you give more details for your setup. On Thu, Jan 31, 2013 at 12:55 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello all, I'm using Folsom on Ubuntu server 12.04 and I'm getting problems with ping and login ssh. Can anybody help me? Regards. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp -- * With Regards * * Ritesh Nanda * *** * http://www.ericsson.com/ ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp -- Lei Zhang Blog: http://jeffrey4l.github.com twitter/weibo: @jeffrey4l ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Problem with IP on VMs
Hello Leandro, It's looking like that: nova secgroup-list-rules default +-+---+-+---+--+ | IP Protocol | From Port | To Port | IP Range | Source Group | +-+---+-+---+--+ | icmp | -1| -1 | 0.0.0.0/0 | | | tcp | 22| 22 | 0.0.0.0/0 | | | tcp |80| 80 | 0.0.0.0/0 | | | tcp | 8080 | 8080| 0.0.0.0/0 | | +-+---+-+---+--+ 2013/2/1 Leandro Reox leandro.r...@gmail.com If you dont created any secgroup should be : nova secgroup-list-rules default Cheerios On Fri, Feb 1, 2013 at 8:35 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello Lei, When I use the command nova secgroup-list-rules, it returns: usage: nova secgroup-list-rules secgroup error: too few arguments What must I insert with the command, the secgroup name? But I haven't created an secgroup. Regards. Guilherme. 2013/1/31 Lei Zhang zhang.lei@gmail.com check list - login the vm through vnc, and check whether it get IP? - login in the vm from the host machine to check whether the IP is works - check the secgroup using command nova secgroup-list-rules On Thu, Jan 31, 2013 at 8:20 AM, Guilherme Russi luisguilherme...@gmail.com wrote: No, how can I do that? Thank you. 2013/1/30 Rain Li lyp20062...@gmail.com Have you setup the secgroup rules? On Wed, Jan 30, 2013 at 2:02 PM, Ritesh Nanda riteshnand...@gmail.com wrote: Can you give more details for your setup. On Thu, Jan 31, 2013 at 12:55 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello all, I'm using Folsom on Ubuntu server 12.04 and I'm getting problems with ping and login ssh. Can anybody help me? Regards. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp -- * With Regards * * Ritesh Nanda * *** * http://www.ericsson.com/ ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp -- Lei Zhang Blog: http://jeffrey4l.github.com twitter/weibo: @jeffrey4l ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
[Openstack] Problem with IP on VMs
Hello all, I'm using Folsom on Ubuntu server 12.04 and I'm getting problems with ping and login ssh. Can anybody help me? Regards. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
Re: [Openstack] Problem with IP on VMs
No, how can I do that? Thank you. 2013/1/30 Rain Li lyp20062...@gmail.com Have you setup the secgroup rules? On Wed, Jan 30, 2013 at 2:02 PM, Ritesh Nanda riteshnand...@gmail.comwrote: Can you give more details for your setup. On Thu, Jan 31, 2013 at 12:55 AM, Guilherme Russi luisguilherme...@gmail.com wrote: Hello all, I'm using Folsom on Ubuntu server 12.04 and I'm getting problems with ping and login ssh. Can anybody help me? Regards. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp -- * With Regards * * Ritesh Nanda * *** * http://www.ericsson.com/ ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
[Openstack] Problem with VNC on compute node
Hello guys, I'm installing the folsom version and I have one computer like the controller and one being the compute node. I can start the VM with cirros OS but I can't use the VNC, I got the error: Failed to connect to server (code: 1006). I've been following this tutorial: http://docs.openstack.org/folsom/basic-install/content/basic-install_compute.html . Can anybody help me? Thank you and regards. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
[Openstack] Help with Glance
Hello Friends, I'm trying to import a image into glance using the command: glance image-create --name=Ubuntu 12.04 UEC --public --container-format= ovf --disk-format=qcow2 precise-server-cloudimg-amd64.img but it doesn't work. My glance version is 2012.1.1, when I try to execute the command it returns: glance: error: no such option: --name. Can anybody help me? Regards. Guilherme. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
[Openstack] Problem in essex nova-manage service list
Hi all, Can anybody help me with this, when I type nova-manage service list I cannot see the nova-compute in the processes and the nova-network has this XXX. What should I do? Thank you all. 2012-12-12 10:36:53 DEBUG nova.utils [req-6e9f672a-c484-40be-9796-a9b8b000358f None None] backend module 'nova.db.sqlalchemy.api' from '/usr/lib/python2.7/dist-packages/nova/db/sqlalchemy/api.pyc' from (pid=5630) __get_backend /usr/lib/python2.7/dist-packages/nova/utils.py:658 Binary Host Zone Status State Updated_At nova-scheduler mypcnova enabled:-) 2012-12-12 12:36:51 nova-consoleauth mypcnova enabled:-) 2012-12-12 12:36:50 nova-console mypcnova enabled:-) 2012-12-12 12:36:51 nova-certmypcnova enabled:-) 2012-12-12 12:36:50 nova-network mypcnova enabledXXX 2012-12-12 12:25:59 ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
[Openstack] Problem when running nova-manage db sync
Hi All, I'm rying to install OpenStack Essex and when I run the nova-manage db sync from this doc's part http://docs.openstack.org/essex/openstack-compute/install/apt/content/compute-db-sync.html, it returs these errors: 2012-12-10 10:56:57 DEBUG nova.utils [-] backend module 'nova.db.sqlalchemy.migration' from '/usr/lib/python2.7/dist-packages/nova/db/sqlalchemy/migration.pyc' from (pid=6208) __get_backend /usr/lib/python2.7/dist-packages/nova/utils.py:658 2012-12-10 10:56:58 WARNING nova.utils [-] /usr/lib/python2.7/dist-packages/sqlalchemy/pool.py:683: SADeprecationWarning: The 'listeners' argument to Pool (and create_engine()) is deprecated. Use event.listen(). Pool.__init__(self, creator, **kw) 2012-12-10 10:56:58 WARNING nova.utils [-] /usr/lib/python2.7/dist-packages/sqlalchemy/pool.py:159: SADeprecationWarning: Pool.add_listener is deprecated. Use event.listen() self.add_listener(l) Can anybody help me? Thank you so much. Guilherme Russi. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
[Openstack] Problem hen running VM instances
Hi again guys,
I'm sorry for all these questions, but when I learn how to install it I'll
help people with these same problems, well, I'm trying to run a VM instance
on Essex, a ubuntu image, but when I try to boot it the OS-EXT-STS:vm_state
is error.
What am I missing?
Thank you all again.
Guilherme Russi.
nova --os_tenant_name cloud image-list
+--+---+++
| ID|Name
| Status | Server |
+--+---+++
| 31d45bd5-5ba5-45b6-814e-54eef1699074 | tty-linux-ramdisk | ACTIVE |
|
| b54cd532-20c2-4b48-a735-6d7fd6b083b8 | tty-linux-kernel | ACTIVE |
|
| c16e7a7a-3c21-44db-8a38-5a49fa262ac9 | tty-linux-kernel | SAVING |
|
| d5220087-89ce-486f-a98e-3eb2c367d7ba | tty-linux | ACTIVE |
|
+--+---+++
nova --os_tenant_name cloud boot --flavor 2 --image
b54cd532-20c2-4b48-a735-6d7fd6b083b8 --security_group default imagem
+-+--+
| Property |Value |
+-+--+
| OS-DCF:diskConfig |MANUAL
|
| OS-EXT-SRV-ATTR:host| None
|
| OS-EXT-SRV-ATTR:hypervisor_hostname | None
|
|OS-EXT-SRV-ATTR:instance_name| instance-0001
|
|OS-EXT-STS:power_state | 0
|
|OS-EXT-STS:task_state| scheduling
|
| OS-EXT-STS:vm_state |error
|
| accessIPv4 |
|
| accessIPv6 |
|
| adminPass | V4oFZcgLjrYn
|
| config_drive|
|
| created | 2012-12-10T15:56:44Z
|
|flavor | m1.small
|
|hostId |
|
| id |
f43f77e7-1e36-4e19-b752-2e4c3ba7c076 |
|image| tty-linux-kernel
|
| key_name |
|
| metadata | {}
|
| name|imagem
|
| progress | 0
|
|status |BUILD
|
| tenant_id | d52768c939ee4a1b8dc82182a29df8d2
|
| updated | 2012-12-10T15:56:44Z
|
| user_id | 830ae8bc830440c28372066bdf20d9bc
|
+-+--+
nova --os_tenant_name cloud list
+--+++--+
| ID | Name | Status | Networks |
+--+++--+
| f43f77e7-1e36-4e19-b752-2e4c3ba7c076 | imagem | ERROR | |
+--+++--+
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help : https://help.launchpad.net/ListHelp
[Openstack] Problem with keystone on Debian
Hello Guys, I'm trying to install OpenStack on Debian Wheezy, but i'm getting some problems with keystone, when i try to create a user in a tenant using the --tenant-id command, it returns the error: keystone: error: unrecognized arguments: --service-id service-id number. Does anybody knows if it is a version problem, I've tried on ubuntu 12.10 and it worked. Hope someone can help me. Thank you. ___ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
