subject:"\[Openstack\] about cloud\-init question"

Re: [Openstack] about cloud-init question

2018-04-23 Thread Eugen Block


I'm glad I could help!


Zitat von "Huang, Haibin" <haibin.hu...@intel.com>:


Hi
I use below config can create both /root/hhb.gz and /home/Ubuntu/config.
Thank you very much!

#cloud-config
write_files:
-   encoding: b64
content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
owner: root:root
path: /root/hhb.gz
permissions: '0644'

runcmd:
-   mkdir -p /home/ubuntu/config
mkdir -p /home/ubuntu/config/hhb


-Original Message-
From: Eugen Block [mailto:ebl...@nde.ag]
Sent: Monday, April 23, 2018 2:58 PM
To: openstack@lists.openstack.org
Subject: Re: [Openstack] about cloud-init question

Hi,

we use this piece of script to pass salt data to instances and execute the
respective commands to start the salt-minion:

---cut here---
#cloud-config
write_files:
   # Minion Konfiguration
   - content: |
   master: 
   id: 
[...]
 owner: root:root
 path: /etc/salt/minion.d/init.conf
 permissions: '0644'

   # Minion Private-Key
   - content: |
   -BEGIN RSA PRIVATE KEY-
[...]
   -END RSA PRIVATE KEY-
   owner: root:root
   path: /etc/salt/pki/minion/minion.pem
   permissions: '0400'

[...]

# Enabled und Startet den Minion
runcmd:
   - rm -f /etc/machine-id
   - systemd-machine-id-setup
   - [ systemctl, enable, salt-minion.service ]
   - [ systemctl, start, --no-block, salt-minion.service ]
   - [ systemctl, daemon-reload ]
---cut here---

This both writes the desired files and also executes required  
commands. We use
this on openSUSE machines, I'm not sure if this differs in your  
environment, but

worth a shot, I guess.

Regards,
Eugen


Zitat von "Huang, Haibin" <haibin.hu...@intel.com>:

> Hi All,
>
> I have a problem about cloud-init.
> I want to both transfer files and execute script. So I give below
> script to user-data when I create instance.
> #cloud-config
> write_files:
> -   encoding: b64
> content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
> owner: root:root
> path: /root/hhb.gz
> permissions: '0644'
>
> #!/bin/bash
> mkdir -p /home/ubuntu/config
>
> but, I can't get /root/hhb.gz and /home/Ubuntu/config.
> If I separate transfer files and execute script. It is ok.
> Any idea?
>
> Below is my debug info
>
> ubuntu@onap-hhb7:~$ sudo cloud-init --version
>
> sudo: unable to resolve host onap-hhb7
>
> cloud-init 0.7.5
>
>
>
> security-groupsubuntu@onap-hhb7:~$ curl
> http://169.254.169.254/2009-04-04/user-data
>
> #cloud-config
>
> write_files:
>
> -   encoding: b64
>
> content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
>
> owner: root:root
>
> path: /root/hhb.gz
>
> permissions: '0644'
>
>
>
> #!/bin/bash
>
> mkdir -p /home/ubuntu/config
>
>
>
> ubuntu@onap-hhb7:~$ sudo ls /root/ -a
>
> .  ..  .bashrc  .profile  .ssh
>
>
>
> ubuntu@onap-hhb7:/var/lib/cloud/instance$ ls
>
> boot-finished datasource  obj.pkl  sem
> user-data.txt.i  vendor-data.txt.i
>
> cloud-config.txt  handlersscripts  user-data.txt  vendor-data.txt
>
> ubuntu@onap-hhb7:/var/lib/cloud/instance$ sudo cat user-data.txt
>
> sudo: unable to resolve host onap-hhb7
>
> #cloud-config
>
> write_files:
>
> -   encoding: b64
>
> content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
>
> owner: root:root
>
> path: /root/hhb.gz
>
> permissions: '0644'
>
>
>
> #!/bin/bash
>
> mkdir -p /home/ubuntu/config
>
>
>
> --
> -
> Huang.haibin
> 11628530
> 86+18106533356




___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack





___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] about cloud-init question

2018-04-23 Thread Huang, Haibin

Hi 
I use below config can create both /root/hhb.gz and /home/Ubuntu/config.
Thank you very much!

#cloud-config
write_files:
-   encoding: b64
content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
owner: root:root
path: /root/hhb.gz
permissions: '0644'  

runcmd:
-   mkdir -p /home/ubuntu/config
mkdir -p /home/ubuntu/config/hhb

> -Original Message-
> From: Eugen Block [mailto:ebl...@nde.ag]
> Sent: Monday, April 23, 2018 2:58 PM
> To: openstack@lists.openstack.org
> Subject: Re: [Openstack] about cloud-init question
> 
> Hi,
> 
> we use this piece of script to pass salt data to instances and execute the
> respective commands to start the salt-minion:
> 
> ---cut here---
> #cloud-config
> write_files:
># Minion Konfiguration
>- content: |
>master: 
>id: 
> [...]
>  owner: root:root
>  path: /etc/salt/minion.d/init.conf
>  permissions: '0644'
> 
># Minion Private-Key
>- content: |
>-BEGIN RSA PRIVATE KEY-
> [...]
>-END RSA PRIVATE KEY-
>owner: root:root
>path: /etc/salt/pki/minion/minion.pem
>permissions: '0400'
> 
> [...]
> 
> # Enabled und Startet den Minion
> runcmd:
>- rm -f /etc/machine-id
>- systemd-machine-id-setup
>- [ systemctl, enable, salt-minion.service ]
>- [ systemctl, start, --no-block, salt-minion.service ]
>- [ systemctl, daemon-reload ]
> ---cut here---
> 
> This both writes the desired files and also executes required commands. We use
> this on openSUSE machines, I'm not sure if this differs in your environment, 
> but
> worth a shot, I guess.
> 
> Regards,
> Eugen
> 
> 
> Zitat von "Huang, Haibin" <haibin.hu...@intel.com>:
> 
> > Hi All,
> >
> > I have a problem about cloud-init.
> > I want to both transfer files and execute script. So I give below
> > script to user-data when I create instance.
> > #cloud-config
> > write_files:
> > -   encoding: b64
> > content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
> > owner: root:root
> > path: /root/hhb.gz
> > permissions: '0644'
> >
> > #!/bin/bash
> > mkdir -p /home/ubuntu/config
> >
> > but, I can't get /root/hhb.gz and /home/Ubuntu/config.
> > If I separate transfer files and execute script. It is ok.
> > Any idea?
> >
> > Below is my debug info
> >
> > ubuntu@onap-hhb7:~$ sudo cloud-init --version
> >
> > sudo: unable to resolve host onap-hhb7
> >
> > cloud-init 0.7.5
> >
> >
> >
> > security-groupsubuntu@onap-hhb7:~$ curl
> > http://169.254.169.254/2009-04-04/user-data
> >
> > #cloud-config
> >
> > write_files:
> >
> > -   encoding: b64
> >
> > content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
> >
> > owner: root:root
> >
> > path: /root/hhb.gz
> >
> > permissions: '0644'
> >
> >
> >
> > #!/bin/bash
> >
> > mkdir -p /home/ubuntu/config
> >
> >
> >
> > ubuntu@onap-hhb7:~$ sudo ls /root/ -a
> >
> > .  ..  .bashrc  .profile  .ssh
> >
> >
> >
> > ubuntu@onap-hhb7:/var/lib/cloud/instance$ ls
> >
> > boot-finished datasource  obj.pkl  sem
> > user-data.txt.i  vendor-data.txt.i
> >
> > cloud-config.txt  handlersscripts  user-data.txt  vendor-data.txt
> >
> > ubuntu@onap-hhb7:/var/lib/cloud/instance$ sudo cat user-data.txt
> >
> > sudo: unable to resolve host onap-hhb7
> >
> > #cloud-config
> >
> > write_files:
> >
> > -   encoding: b64
> >
> > content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
> >
> > owner: root:root
> >
> > path: /root/hhb.gz
> >
> > permissions: '0644'
> >
> >
> >
> > #!/bin/bash
> >
> > mkdir -p /home/ubuntu/config
> >
> >
> >
> > --
> > -
> > Huang.haibin
> > 11628530
> > 86+18106533356
> 
> 
> 
> 
> ___
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack@lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] about cloud-init question

2018-04-23 Thread Huang, Haibin

I suspect my cloud-init version is too lower. Can you share me your cloud-init 
version?
Thank you!

> -Original Message-
> From: Eugen Block [mailto:ebl...@nde.ag]
> Sent: Monday, April 23, 2018 2:58 PM
> To: openstack@lists.openstack.org
> Subject: Re: [Openstack] about cloud-init question
> 
> Hi,
> 
> we use this piece of script to pass salt data to instances and execute the
> respective commands to start the salt-minion:
> 
> ---cut here---
> #cloud-config
> write_files:
># Minion Konfiguration
>- content: |
>master: 
>id: 
> [...]
>  owner: root:root
>  path: /etc/salt/minion.d/init.conf
>  permissions: '0644'
> 
># Minion Private-Key
>- content: |
>-BEGIN RSA PRIVATE KEY-
> [...]
>-END RSA PRIVATE KEY-
>owner: root:root
>path: /etc/salt/pki/minion/minion.pem
>permissions: '0400'
> 
> [...]
> 
> # Enabled und Startet den Minion
> runcmd:
>- rm -f /etc/machine-id
>- systemd-machine-id-setup
>- [ systemctl, enable, salt-minion.service ]
>- [ systemctl, start, --no-block, salt-minion.service ]
>- [ systemctl, daemon-reload ]
> ---cut here---
> 
> This both writes the desired files and also executes required commands. We use
> this on openSUSE machines, I'm not sure if this differs in your environment, 
> but
> worth a shot, I guess.
> 
> Regards,
> Eugen
> 
> 
> Zitat von "Huang, Haibin" <haibin.hu...@intel.com>:
> 
> > Hi All,
> >
> > I have a problem about cloud-init.
> > I want to both transfer files and execute script. So I give below
> > script to user-data when I create instance.
> > #cloud-config
> > write_files:
> > -   encoding: b64
> > content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
> > owner: root:root
> > path: /root/hhb.gz
> > permissions: '0644'
> >
> > #!/bin/bash
> > mkdir -p /home/ubuntu/config
> >
> > but, I can't get /root/hhb.gz and /home/Ubuntu/config.
> > If I separate transfer files and execute script. It is ok.
> > Any idea?
> >
> > Below is my debug info
> >
> > ubuntu@onap-hhb7:~$ sudo cloud-init --version
> >
> > sudo: unable to resolve host onap-hhb7
> >
> > cloud-init 0.7.5
> >
> >
> >
> > security-groupsubuntu@onap-hhb7:~$ curl
> > http://169.254.169.254/2009-04-04/user-data
> >
> > #cloud-config
> >
> > write_files:
> >
> > -   encoding: b64
> >
> > content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
> >
> > owner: root:root
> >
> > path: /root/hhb.gz
> >
> > permissions: '0644'
> >
> >
> >
> > #!/bin/bash
> >
> > mkdir -p /home/ubuntu/config
> >
> >
> >
> > ubuntu@onap-hhb7:~$ sudo ls /root/ -a
> >
> > .  ..  .bashrc  .profile  .ssh
> >
> >
> >
> > ubuntu@onap-hhb7:/var/lib/cloud/instance$ ls
> >
> > boot-finished datasource  obj.pkl  sem
> > user-data.txt.i  vendor-data.txt.i
> >
> > cloud-config.txt  handlersscripts  user-data.txt  vendor-data.txt
> >
> > ubuntu@onap-hhb7:/var/lib/cloud/instance$ sudo cat user-data.txt
> >
> > sudo: unable to resolve host onap-hhb7
> >
> > #cloud-config
> >
> > write_files:
> >
> > -   encoding: b64
> >
> > content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
> >
> > owner: root:root
> >
> > path: /root/hhb.gz
> >
> > permissions: '0644'
> >
> >
> >
> > #!/bin/bash
> >
> > mkdir -p /home/ubuntu/config
> >
> >
> >
> > --
> > -
> > Huang.haibin
> > 11628530
> > 86+18106533356
> 
> 
> 
> 
> ___
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack@lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] about cloud-init question

2018-04-23 Thread Eugen Block


Hi,

we use this piece of script to pass salt data to instances and execute  
the respective commands to start the salt-minion:


---cut here---
#cloud-config
write_files:
  # Minion Konfiguration
  - content: |
  master: 
  id: 
[...]
owner: root:root
path: /etc/salt/minion.d/init.conf
permissions: '0644'

  # Minion Private-Key
  - content: |
  -BEGIN RSA PRIVATE KEY-
[...]
  -END RSA PRIVATE KEY-
  owner: root:root
  path: /etc/salt/pki/minion/minion.pem
  permissions: '0400'

[...]

# Enabled und Startet den Minion
runcmd:
  - rm -f /etc/machine-id
  - systemd-machine-id-setup
  - [ systemctl, enable, salt-minion.service ]
  - [ systemctl, start, --no-block, salt-minion.service ]
  - [ systemctl, daemon-reload ]
---cut here---

This both writes the desired files and also executes required  
commands. We use this on openSUSE machines, I'm not sure if this  
differs in your environment, but worth a shot, I guess.


Regards,
Eugen


Zitat von "Huang, Haibin" :


Hi All,

I have a problem about cloud-init.
I want to both transfer files and execute script. So I give below  
script to user-data when I create instance.

#cloud-config
write_files:
-   encoding: b64
content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
owner: root:root
path: /root/hhb.gz
permissions: '0644'

#!/bin/bash
mkdir -p /home/ubuntu/config

but, I can't get /root/hhb.gz and /home/Ubuntu/config.
If I separate transfer files and execute script. It is ok.
Any idea?

Below is my debug info

ubuntu@onap-hhb7:~$ sudo cloud-init --version

sudo: unable to resolve host onap-hhb7

cloud-init 0.7.5



security-groupsubuntu@onap-hhb7:~$ curl   
http://169.254.169.254/2009-04-04/user-data


#cloud-config

write_files:

-   encoding: b64

content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==

owner: root:root

path: /root/hhb.gz

permissions: '0644'



#!/bin/bash

mkdir -p /home/ubuntu/config



ubuntu@onap-hhb7:~$ sudo ls /root/ -a

.  ..  .bashrc  .profile  .ssh



ubuntu@onap-hhb7:/var/lib/cloud/instance$ ls

boot-finished datasource  obj.pkl  sem 
user-data.txt.i  vendor-data.txt.i


cloud-config.txt  handlersscripts  user-data.txt  vendor-data.txt

ubuntu@onap-hhb7:/var/lib/cloud/instance$ sudo cat user-data.txt

sudo: unable to resolve host onap-hhb7

#cloud-config

write_files:

-   encoding: b64

content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==

owner: root:root

path: /root/hhb.gz

permissions: '0644'



#!/bin/bash

mkdir -p /home/ubuntu/config



---
Huang.haibin
11628530
86+18106533356





___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] about cloud-init question

2018-04-22 Thread Fabian Zimmermann

Hi,

I dont think its possible to switch the interpreter during the run.

I would suggest to take a look into your cloud-init.log maybe its telling you 
why it is not doing what you want.

 Fabian Zimmermann


Am 23. April 2018 03:08:15 MESZ schrieb "Huang, Haibin" 
:
>Hi All,
>
>I have a problem about cloud-init.
>I want to both transfer files and execute script. So I give below
>script to user-data when I create instance.
>#cloud-config
>write_files:
>-   encoding: b64
>content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
>owner: root:root
>path: /root/hhb.gz
>permissions: '0644'
>
>#!/bin/bash
>mkdir -p /home/ubuntu/config
>
>but, I can't get /root/hhb.gz and /home/Ubuntu/config.
>If I separate transfer files and execute script. It is ok.
>Any idea?
>
>Below is my debug info
>
>ubuntu@onap-hhb7:~$ sudo cloud-init --version
>
>sudo: unable to resolve host onap-hhb7
>
>cloud-init 0.7.5
>
>
>
>security-groupsubuntu@onap-hhb7:~$ curl 
>http://169.254.169.254/2009-04-04/user-data
>
>#cloud-config
>
>write_files:
>
>-   encoding: b64
>
>content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
>
>owner: root:root
>
>path: /root/hhb.gz
>
>permissions: '0644'
>
>
>
>#!/bin/bash
>
>mkdir -p /home/ubuntu/config
>
>
>
>ubuntu@onap-hhb7:~$ sudo ls /root/ -a
>
>.  ..  .bashrc  .profile  .ssh
>
>
>
>ubuntu@onap-hhb7:/var/lib/cloud/instance$ ls
>
>boot-finished datasource  obj.pkl  semuser-data.txt.i 
>vendor-data.txt.i
>
>cloud-config.txt  handlersscripts  user-data.txt  vendor-data.txt
>
>ubuntu@onap-hhb7:/var/lib/cloud/instance$ sudo cat user-data.txt
>
>sudo: unable to resolve host onap-hhb7
>
>#cloud-config
>
>write_files:
>
>-   encoding: b64
>
>content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
>
>owner: root:root
>
>path: /root/hhb.gz
>
>permissions: '0644'
>
>
>
>#!/bin/bash
>
>mkdir -p /home/ubuntu/config
>
>
>
>---
>Huang.haibin
>11628530
>86+18106533356
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] about cloud-init question

2018-04-22 Thread Huang, Haibin

Hi All,

I have a problem about cloud-init.
I want to both transfer files and execute script. So I give below script to 
user-data when I create instance.
#cloud-config
write_files:
-   encoding: b64
content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==
owner: root:root
path: /root/hhb.gz
permissions: '0644'

#!/bin/bash
mkdir -p /home/ubuntu/config

but, I can't get /root/hhb.gz and /home/Ubuntu/config.
If I separate transfer files and execute script. It is ok.
Any idea?

Below is my debug info

ubuntu@onap-hhb7:~$ sudo cloud-init --version

sudo: unable to resolve host onap-hhb7

cloud-init 0.7.5



security-groupsubuntu@onap-hhb7:~$ curl  
http://169.254.169.254/2009-04-04/user-data

#cloud-config

write_files:

-   encoding: b64

content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==

owner: root:root

path: /root/hhb.gz

permissions: '0644'



#!/bin/bash

mkdir -p /home/ubuntu/config



ubuntu@onap-hhb7:~$ sudo ls /root/ -a

.  ..  .bashrc  .profile  .ssh



ubuntu@onap-hhb7:/var/lib/cloud/instance$ ls

boot-finished datasource  obj.pkl  semuser-data.txt.i  
vendor-data.txt.i

cloud-config.txt  handlersscripts  user-data.txt  vendor-data.txt

ubuntu@onap-hhb7:/var/lib/cloud/instance$ sudo cat user-data.txt

sudo: unable to resolve host onap-hhb7

#cloud-config

write_files:

-   encoding: b64

content: H4sICMxh2VoAA2hoYgCzKE5JK07hAgDCo1pOBw==

owner: root:root

path: /root/hhb.gz

permissions: '0644'



#!/bin/bash

mkdir -p /home/ubuntu/config



---
Huang.haibin
11628530
86+18106533356

___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] about cloud-init question

Re: [Openstack] about cloud-init question

Re: [Openstack] about cloud-init question

Re: [Openstack] about cloud-init question

Re: [Openstack] about cloud-init question

[Openstack] about cloud-init question

6 matches

Site Navigation

Mail list logo

Footer information