пн, 9 мар. 2020 г. в 11:55, Guillaume Gardet :
>
> Hi,
>
>
> > -Original Message-
> > From: Matwey V. Kornilov
> > Sent: 04 March 2020 18:05
> > To: Matthias Brugger
> > Cc: opensuse-arm@opensuse.org
> > Subject: Re: [opensuse-arm] ARM JeOS for software.opensuse.org
> >
> > ср, 4 мар. 2020 г. в 19:23, Matthias Brugger :
> > >
> > >
> > >
> > > On 04/03/2020 16:56, Matwey V. Kornilov wrote:
> > > > ср, 4 мар. 2020 г. в 18:52, Matthias Brugger :
> > > >>
> > > >>
> > > >>
> > > >> On 03/03/2020 17:54, Matwey V. Kornilov wrote:
> > > >>> вт, 3 мар. 2020 г. в 19:39, Matthias Brugger :
> > >
> > > Hi Matwey,
> > >
> > > On 03/03/2020 17:23, Matwey V. Kornilov wrote:
> > > > Hello,
> > > >
> > > > I think it would be great to have something like that
> > > > https://ubuntu.com/download/raspberry-pi on
> > > > https://software.opensuse.org/distributions/tumbleweed page. For
> > > > few boards with good support.
> > > > Currently, information about RPi support is hidden in the internals
> > > > of
> > Wiki.
> > > >
> > > > I asked this once in the past, but this idea had no support at
> > > > that moment. What do you think now?
> > > >
> > >
> > > I think this is a good idea. We should make more noise about the
> > > things
> > we do.
> > > Support for board is too much hidden. We should carefully select
> > > a few boards (e.g. Leap supported) to announce them more broadly.
> > >
> > > Regards,
> > > Matthias
> > > >>>
> > > >>> From my side, I would say that BeagleBone Black has a good support
> > > >>> level. Almost all hardware are working, except PRUs, and
> > > >>> isochronous USB transfer for MUSB host controller is sometimes buggy.
> > > >>> I am trying to fix the latter in upstream Linux kernel, but no big
> > > >>> success yet. MUSB maintainers just silently ignore my patches for
> > > >>> some reason...
> > > >>>
> > > >>
> > > >> That's not leap supported, right? That's not mandatory. We can also
> > > >> decide to publish some boards people are actually using and happy
> > > >> to test + debug. What we should try to avoid, is to promote boards
> > > >> that then later doesn't get enough love and get stale.
> > > >
> > > > It is currently supported in Leap:
> > > > https://download.opensuse.org/ports/armv7hl/distribution/leap/15.1/a
> > > > ppliances/openSUSE-Leap-15.1-ARM-JeOS-beaglebone.armv7l.raw.xz
> > > >
> > >
> > > My bad, I wasn't aware we still have openSUSE Leap on armv7.
> > >
> > > > I am running Leap 15.0/15.1 on BeagleBones in prod.
> > > > But you are right here, I have never tested graphical interface
> > > > images for this board.
> > > >
> > >
> > > Would be a good time to test 15.2 then :)
> >
> > It boots and still says that it is alpha...
> > PRETTY_NAME="openSUSE Leap 15.2 Alpha"
>
> It should not. The problem atm is Leap 15.2 ARM images are in 2 places:
> *
> http://download.opensuse.org/ports/aarch64/distribution/leap/15.2/appliances/
> which is outdated
> * http://download.opensuse.org/ports/aarch64/distribution/leap/15.2/live/
> with latest release.
You are right. The latter is PRETTY_NAME="openSUSE Leap 15.2 Beta"
>
> Adrian is aware.
>
> Cheers,
> Guillaume
>
>
> >
> >
> > --
> > With best regards,
> > Matwey V. Kornilov
> > --
> > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
> > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
>
> IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended
> recipient, please notify the sender immediately and do not disclose the
> contents to any other person, use it for any purpose, or store or copy the
> information in any medium. Thank you.
--
With best regards,
Matwey V. Kornilov
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org