Re: [openthinclient-user] request for more display drivers
Realm -> openthinclient -> rightclick edit Change the PXE-Service from "Auto" to "SingleHomedBroadcasePXEService" Then restart the openthinclient-service. Do not add the client manual with its MAC. Please try first, if it will be found automaticly in "PXE-Clients". Then doubleclick on it and register the client. Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 16:06 GMT+02:00 chris winkel : > I use Windows server 2008 R2 DHCP > > > > *From:* Stecher, Alexander [mailto:a.stec...@openthinclient.com] > *Sent:* donderdag 10 april 2014 16:01 > > *To:* Mailingliste > *Subject:* Re: [openthinclient-user] request for more display drivers > > > > What type of DHCP-server do you use? > > > Alexander Stecher > -- > Dipl.-Ing. (BA) > Telefon: +49 711 1378636-1 > Handy: +49 151 2761 2961 > mailto:a.stec...@openthinclient.com > > > openthinclient gmbh > Heilbronner Str. 150, 70191 Stuttgart, Deutschland > Telefon: +49 711 1378636-0 > Telefax: +49 711 1378636-9 > Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 > Geschäftsführer: Alexander Stecher > http://openthinclient.com > > > > 2014-04-10 15:28 GMT+02:00 chris winkel : > > Hi alexander, > > > > I am unable to pxe boot with corsus, > > I have put in the mac address of the thinclient , pxe boot not working. > > > > In mandriva it works if I only add the thinclient with it’s mac address > > > > > > > > *From:* Stecher, Alexander [mailto:a.stec...@openthinclient.com] > *Sent:* donderdag 10 april 2014 15:14 > > > *To:* Mailingliste > *Subject:* Re: [openthinclient-user] request for more display drivers > > > > Device - Display - see the bubble-help "xrandr -q" > > To open a shell: control-alt-x > > > Alexander Stecher > -- > Dipl.-Ing. (BA) > Telefon: +49 711 1378636-1 > Handy: +49 151 2761 2961 > mailto:a.stec...@openthinclient.com > > > openthinclient gmbh > Heilbronner Str. 150, 70191 Stuttgart, Deutschland > Telefon: +49 711 1378636-0 > Telefax: +49 711 1378636-9 > Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 > Geschäftsführer: Alexander Stecher > http://openthinclient.com > > > > 2014-04-10 15:02 GMT+02:00 chris winkel : > > How do i know if openthinclient detects my vga and dvi port ? > > > > *From:* Stecher, Alexander [mailto:a.stec...@openthinclient.com] > *Sent:* donderdag 10 april 2014 12:20 > *To:* Mailingliste > *Subject:* Re: [openthinclient-user] request for more display drivers > > > > Hey Chris, > > if you are > > ... new to linux ... > > I believe it isn't possible for you to add a driver in the core system. > > > Alexander Stecher > -- > Dipl.-Ing. (BA) > Telefon: +49 711 1378636-1 > Handy: +49 151 2761 2961 > mailto:a.stec...@openthinclient.com > > > openthinclient gmbh > Heilbronner Str. 150, 70191 Stuttgart, Deutschland > Telefon: +49 711 1378636-0 > Telefax: +49 711 1378636-9 > Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 > Geschäftsführer: Alexander Stecher > http://openthinclient.com > > > > 2014-04-10 12:09 GMT+02:00 chris winkel : > > Hi alexander, > > > > Found this on the internet > > > > But I am new to linux and I don’t know how add it to the openthinclient > > > > · Using Ubuntu 12.04 LTS. 64bit. Get the driver files from here: > https://sites.google.com/site/easylinuxtipsproject/sis > > The xorg drivers you can install in ubuntu software center won’t give you > anything higher than 1024×768 as it fails to recognize the SIS671 chipset > and falls back to the stock framebuffer. > Put the two binary files in the tarball from the site above, sis671_drv.so > and sis671_drv.la where the page above describes. Be sure to get the > correct package for 32bit vs 64bit to match the version of ubunty you are > running. Thus, I used the files in sis-64-bit-1204.tar.gz > > Don’t use the xorg.conf contained in the tarball, or if you do, it may not > work. It didn’t for me, and just hung. If it does don’t forget you can open > a console with Ctrl+Alt+F1 and login and copy / remove the xorg.conf and > get back to where you were before. > > Once you get back into the gui, go to the display settings and you should > see you can change the resolution up to 192
Re: [openthinclient-user] request for more display drivers
I use Windows server 2008 R2 DHCP From: Stecher, Alexander [mailto:a.stec...@openthinclient.com] Sent: donderdag 10 april 2014 16:01 To: Mailingliste Subject: Re: [openthinclient-user] request for more display drivers What type of DHCP-server do you use? Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com> openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 15:28 GMT+02:00 chris winkel mailto:ch...@ververexport.nl>>: Hi alexander, I am unable to pxe boot with corsus, I have put in the mac address of the thinclient , pxe boot not working. In mandriva it works if I only add the thinclient with it’s mac address From: Stecher, Alexander [mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com>] Sent: donderdag 10 april 2014 15:14 To: Mailingliste Subject: Re: [openthinclient-user] request for more display drivers Device - Display - see the bubble-help "xrandr -q" To open a shell: control-alt-x Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com> openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 15:02 GMT+02:00 chris winkel mailto:ch...@ververexport.nl>>: How do i know if openthinclient detects my vga and dvi port ? From: Stecher, Alexander [mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com>] Sent: donderdag 10 april 2014 12:20 To: Mailingliste Subject: Re: [openthinclient-user] request for more display drivers Hey Chris, if you are > ... new to linux ... I believe it isn't possible for you to add a driver in the core system. Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com> openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 12:09 GMT+02:00 chris winkel mailto:ch...@ververexport.nl>>: Hi alexander, Found this on the internet But I am new to linux and I don’t know how add it to the openthinclient • Using Ubuntu 12.04 LTS. 64bit. Get the driver files from here: https://sites.google.com/site/easylinuxtipsproject/sis The xorg drivers you can install in ubuntu software center won’t give you anything higher than 1024×768 as it fails to recognize the SIS671 chipset and falls back to the stock framebuffer. Put the two binary files in the tarball from the site above, sis671_drv.so and sis671_drv.la<http://sis671_drv.la> where the page above describes. Be sure to get the correct package for 32bit vs 64bit to match the version of ubunty you are running. Thus, I used the files in sis-64-bit-1204.tar.gz Don’t use the xorg.conf contained in the tarball, or if you do, it may not work. It didn’t for me, and just hung. If it does don’t forget you can open a console with Ctrl+Alt+F1 and login and copy / remove the xorg.conf and get back to where you were before. Once you get back into the gui, go to the display settings and you should see you can change the resolution up to 1920×1080. Here is my working xorg.conf that works and has a proper modeline for 1920×1080. Section “Device” Identifier “Configured Video Device” Driver “sis671″ EndSection Section “Monitor” Identifier “Configured Monitor” Modeline “1920x1080_60.00″ 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync EndSection Section “Screen” Identifier “Default Screen” Monitor “Configured Monitor” Device “Configured Video Device” DefaultDepth 24 EndSection From: Stecher, Alexander [mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com>] Sent: donderdag 10 april 2014 11:46 To: Mailingliste Subject: Re: [openthinclient-user] request for more display drivers Please try to use Consus. Consus supports dual-screen. To add a driver: - setup a build environment - compile it in the kernel - if needed, some libraries have also to be updated Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com> openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgerich
Re: [openthinclient-user] request for more display drivers
What type of DHCP-server do you use? Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 15:28 GMT+02:00 chris winkel : > Hi alexander, > > > > I am unable to pxe boot with corsus, > > I have put in the mac address of the thinclient , pxe boot not working. > > > > In mandriva it works if I only add the thinclient with it’s mac address > > > > > > > > *From:* Stecher, Alexander [mailto:a.stec...@openthinclient.com] > *Sent:* donderdag 10 april 2014 15:14 > > *To:* Mailingliste > *Subject:* Re: [openthinclient-user] request for more display drivers > > > > Device - Display - see the bubble-help "xrandr -q" > > To open a shell: control-alt-x > > > Alexander Stecher > -- > Dipl.-Ing. (BA) > Telefon: +49 711 1378636-1 > Handy: +49 151 2761 2961 > mailto:a.stec...@openthinclient.com > > > openthinclient gmbh > Heilbronner Str. 150, 70191 Stuttgart, Deutschland > Telefon: +49 711 1378636-0 > Telefax: +49 711 1378636-9 > Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 > Geschäftsführer: Alexander Stecher > http://openthinclient.com > > > > 2014-04-10 15:02 GMT+02:00 chris winkel : > > How do i know if openthinclient detects my vga and dvi port ? > > > > *From:* Stecher, Alexander [mailto:a.stec...@openthinclient.com] > *Sent:* donderdag 10 april 2014 12:20 > *To:* Mailingliste > *Subject:* Re: [openthinclient-user] request for more display drivers > > > > Hey Chris, > > if you are > > ... new to linux ... > > I believe it isn't possible for you to add a driver in the core system. > > > Alexander Stecher > -- > Dipl.-Ing. (BA) > Telefon: +49 711 1378636-1 > Handy: +49 151 2761 2961 > mailto:a.stec...@openthinclient.com > > > openthinclient gmbh > Heilbronner Str. 150, 70191 Stuttgart, Deutschland > Telefon: +49 711 1378636-0 > Telefax: +49 711 1378636-9 > Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 > Geschäftsführer: Alexander Stecher > http://openthinclient.com > > > > 2014-04-10 12:09 GMT+02:00 chris winkel : > > Hi alexander, > > > > Found this on the internet > > > > But I am new to linux and I don’t know how add it to the openthinclient > > > > · Using Ubuntu 12.04 LTS. 64bit. Get the driver files from here: > https://sites.google.com/site/easylinuxtipsproject/sis > > The xorg drivers you can install in ubuntu software center won’t give you > anything higher than 1024×768 as it fails to recognize the SIS671 chipset > and falls back to the stock framebuffer. > Put the two binary files in the tarball from the site above, sis671_drv.so > and sis671_drv.la where the page above describes. Be sure to get the > correct package for 32bit vs 64bit to match the version of ubunty you are > running. Thus, I used the files in sis-64-bit-1204.tar.gz > > Don’t use the xorg.conf contained in the tarball, or if you do, it may not > work. It didn’t for me, and just hung. If it does don’t forget you can open > a console with Ctrl+Alt+F1 and login and copy / remove the xorg.conf and > get back to where you were before. > > Once you get back into the gui, go to the display settings and you should > see you can change the resolution up to 1920×1080. > > Here is my working xorg.conf that works and has a proper modeline for > 1920×1080. > > Section “Device” > Identifier “Configured Video Device” > Driver “sis671″ > EndSection > > Section “Monitor” > Identifier “Configured Monitor” > Modeline “1920x1080_60.00″ 173.00 1920 2048 2248 2576 1080 1083 1088 1120 > -hsync +vsync > EndSection > > Section “Screen” > Identifier “Default Screen” > Monitor “Configured Monitor” > Device “Configured Video Device” > DefaultDepth 24 > EndSection > > > > > > *From:* Stecher, Alexander [mailto:a.stec...@openthinclient.com] > *Sent:* donderdag 10 april 2014 11:46 > *To:* Mailingliste > *Subject:* Re: [openthinclient-user] request for more display drivers > > > > Please try to use Consus. > > Consus supports dual-screen. > > To add a driver: > - setup a build environment > - compile it in the kernel > > - if needed, some libraries have also to be updated > > > Alexander Stecher > -- > Dipl.-Ing. (BA) > Telefon: +49 711 1378636-1 > Handy: +49 151 2761 2961 > mailto:a.stec
Re: [openthinclient-user] request for more display drivers
Hi alexander, I am unable to pxe boot with corsus, I have put in the mac address of the thinclient , pxe boot not working. In mandriva it works if I only add the thinclient with it’s mac address From: Stecher, Alexander [mailto:a.stec...@openthinclient.com] Sent: donderdag 10 april 2014 15:14 To: Mailingliste Subject: Re: [openthinclient-user] request for more display drivers Device - Display - see the bubble-help "xrandr -q" To open a shell: control-alt-x Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com> openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 15:02 GMT+02:00 chris winkel mailto:ch...@ververexport.nl>>: How do i know if openthinclient detects my vga and dvi port ? From: Stecher, Alexander [mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com>] Sent: donderdag 10 april 2014 12:20 To: Mailingliste Subject: Re: [openthinclient-user] request for more display drivers Hey Chris, if you are > ... new to linux ... I believe it isn't possible for you to add a driver in the core system. Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com> openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 12:09 GMT+02:00 chris winkel mailto:ch...@ververexport.nl>>: Hi alexander, Found this on the internet But I am new to linux and I don’t know how add it to the openthinclient • Using Ubuntu 12.04 LTS. 64bit. Get the driver files from here: https://sites.google.com/site/easylinuxtipsproject/sis The xorg drivers you can install in ubuntu software center won’t give you anything higher than 1024×768 as it fails to recognize the SIS671 chipset and falls back to the stock framebuffer. Put the two binary files in the tarball from the site above, sis671_drv.so and sis671_drv.la<http://sis671_drv.la> where the page above describes. Be sure to get the correct package for 32bit vs 64bit to match the version of ubunty you are running. Thus, I used the files in sis-64-bit-1204.tar.gz Don’t use the xorg.conf contained in the tarball, or if you do, it may not work. It didn’t for me, and just hung. If it does don’t forget you can open a console with Ctrl+Alt+F1 and login and copy / remove the xorg.conf and get back to where you were before. Once you get back into the gui, go to the display settings and you should see you can change the resolution up to 1920×1080. Here is my working xorg.conf that works and has a proper modeline for 1920×1080. Section “Device” Identifier “Configured Video Device” Driver “sis671″ EndSection Section “Monitor” Identifier “Configured Monitor” Modeline “1920x1080_60.00″ 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync EndSection Section “Screen” Identifier “Default Screen” Monitor “Configured Monitor” Device “Configured Video Device” DefaultDepth 24 EndSection From: Stecher, Alexander [mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com>] Sent: donderdag 10 april 2014 11:46 To: Mailingliste Subject: Re: [openthinclient-user] request for more display drivers Please try to use Consus. Consus supports dual-screen. To add a driver: - setup a build environment - compile it in the kernel - if needed, some libraries have also to be updated Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com> openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 11:17 GMT+02:00 chris winkel mailto:ch...@ververexport.nl>>: All, I have a dell OptiPlex FX160, The resolution will not get higher than 1024 X 743, Also I cannot use the dual screen mode ( vga + dvi ) , Can someone please tell me how to fix this or add drivers maybe? I hope someone can help me , I am really a fan of openthinclient Kind regards, Christian Winkel -- Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _
Re: [openthinclient-user] request for more display drivers
Device - Display - see the bubble-help "xrandr -q" To open a shell: control-alt-x Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 15:02 GMT+02:00 chris winkel : > How do i know if openthinclient detects my vga and dvi port ? > > > > *From:* Stecher, Alexander [mailto:a.stec...@openthinclient.com] > *Sent:* donderdag 10 april 2014 12:20 > *To:* Mailingliste > *Subject:* Re: [openthinclient-user] request for more display drivers > > > > Hey Chris, > > if you are > > ... new to linux ... > > I believe it isn't possible for you to add a driver in the core system. > > > Alexander Stecher > -- > Dipl.-Ing. (BA) > Telefon: +49 711 1378636-1 > Handy: +49 151 2761 2961 > mailto:a.stec...@openthinclient.com > > > openthinclient gmbh > Heilbronner Str. 150, 70191 Stuttgart, Deutschland > Telefon: +49 711 1378636-0 > Telefax: +49 711 1378636-9 > Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 > Geschäftsführer: Alexander Stecher > http://openthinclient.com > > > > 2014-04-10 12:09 GMT+02:00 chris winkel : > > Hi alexander, > > > > Found this on the internet > > > > But I am new to linux and I don’t know how add it to the openthinclient > > > > · Using Ubuntu 12.04 LTS. 64bit. Get the driver files from here: > https://sites.google.com/site/easylinuxtipsproject/sis > > The xorg drivers you can install in ubuntu software center won’t give you > anything higher than 1024×768 as it fails to recognize the SIS671 chipset > and falls back to the stock framebuffer. > Put the two binary files in the tarball from the site above, sis671_drv.so > and sis671_drv.la where the page above describes. Be sure to get the > correct package for 32bit vs 64bit to match the version of ubunty you are > running. Thus, I used the files in sis-64-bit-1204.tar.gz > > Don’t use the xorg.conf contained in the tarball, or if you do, it may not > work. It didn’t for me, and just hung. If it does don’t forget you can open > a console with Ctrl+Alt+F1 and login and copy / remove the xorg.conf and > get back to where you were before. > > Once you get back into the gui, go to the display settings and you should > see you can change the resolution up to 1920×1080. > > Here is my working xorg.conf that works and has a proper modeline for > 1920×1080. > > Section “Device” > Identifier “Configured Video Device” > Driver “sis671″ > EndSection > > Section “Monitor” > Identifier “Configured Monitor” > Modeline “1920x1080_60.00″ 173.00 1920 2048 2248 2576 1080 1083 1088 1120 > -hsync +vsync > EndSection > > Section “Screen” > Identifier “Default Screen” > Monitor “Configured Monitor” > Device “Configured Video Device” > DefaultDepth 24 > EndSection > > > > > > *From:* Stecher, Alexander [mailto:a.stec...@openthinclient.com] > *Sent:* donderdag 10 april 2014 11:46 > *To:* Mailingliste > *Subject:* Re: [openthinclient-user] request for more display drivers > > > > Please try to use Consus. > > Consus supports dual-screen. > > To add a driver: > - setup a build environment > - compile it in the kernel > > - if needed, some libraries have also to be updated > > > Alexander Stecher > -- > Dipl.-Ing. (BA) > Telefon: +49 711 1378636-1 > Handy: +49 151 2761 2961 > mailto:a.stec...@openthinclient.com > > > openthinclient gmbh > Heilbronner Str. 150, 70191 Stuttgart, Deutschland > Telefon: +49 711 1378636-0 > Telefax: +49 711 1378636-9 > Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 > Geschäftsführer: Alexander Stecher > http://openthinclient.com > > > > 2014-04-10 11:17 GMT+02:00 chris winkel : > > All, > > > > I have a dell OptiPlex FX160, > > > > The resolution will not get higher than 1024 X 743, > > > > Also I cannot use the dual screen mode ( vga + dvi ) , > > > > Can someone please tell me how to fix this or add drivers maybe? > > > > I hope someone can help me , I am really a fan of openthinclient > > > > Kind regards, > > > > Christian Winkel > > > > -- > Put Bad Developers to Shame > Dominate Development with Jenkins Continuous Integration > Continuously Automate Build, Test & Deployment >
Re: [openthinclient-user] request for more display drivers
How do i know if openthinclient detects my vga and dvi port ? From: Stecher, Alexander [mailto:a.stec...@openthinclient.com] Sent: donderdag 10 april 2014 12:20 To: Mailingliste Subject: Re: [openthinclient-user] request for more display drivers Hey Chris, if you are > ... new to linux ... I believe it isn't possible for you to add a driver in the core system. Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com> openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 12:09 GMT+02:00 chris winkel mailto:ch...@ververexport.nl>>: Hi alexander, Found this on the internet But I am new to linux and I don’t know how add it to the openthinclient • Using Ubuntu 12.04 LTS. 64bit. Get the driver files from here: https://sites.google.com/site/easylinuxtipsproject/sis The xorg drivers you can install in ubuntu software center won’t give you anything higher than 1024×768 as it fails to recognize the SIS671 chipset and falls back to the stock framebuffer. Put the two binary files in the tarball from the site above, sis671_drv.so and sis671_drv.la<http://sis671_drv.la> where the page above describes. Be sure to get the correct package for 32bit vs 64bit to match the version of ubunty you are running. Thus, I used the files in sis-64-bit-1204.tar.gz Don’t use the xorg.conf contained in the tarball, or if you do, it may not work. It didn’t for me, and just hung. If it does don’t forget you can open a console with Ctrl+Alt+F1 and login and copy / remove the xorg.conf and get back to where you were before. Once you get back into the gui, go to the display settings and you should see you can change the resolution up to 1920×1080. Here is my working xorg.conf that works and has a proper modeline for 1920×1080. Section “Device” Identifier “Configured Video Device” Driver “sis671″ EndSection Section “Monitor” Identifier “Configured Monitor” Modeline “1920x1080_60.00″ 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync EndSection Section “Screen” Identifier “Default Screen” Monitor “Configured Monitor” Device “Configured Video Device” DefaultDepth 24 EndSection From: Stecher, Alexander [mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com>] Sent: donderdag 10 april 2014 11:46 To: Mailingliste Subject: Re: [openthinclient-user] request for more display drivers Please try to use Consus. Consus supports dual-screen. To add a driver: - setup a build environment - compile it in the kernel - if needed, some libraries have also to be updated Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com> openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 11:17 GMT+02:00 chris winkel mailto:ch...@ververexport.nl>>: All, I have a dell OptiPlex FX160, The resolution will not get higher than 1024 X 743, Also I cannot use the dual screen mode ( vga + dvi ) , Can someone please tell me how to fix this or add drivers maybe? I hope someone can help me , I am really a fan of openthinclient Kind regards, Christian Winkel -- Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees ___ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net<mailto:openthinclient-user@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/openthinclient-user -- Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees ___ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net<mailto:openthinclient-user@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/openthinclient-user -- Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continu
Re: [openthinclient-user] request for more display drivers
Hey Chris, if you are > ... new to linux ... I believe it isn't possible for you to add a driver in the core system. Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 12:09 GMT+02:00 chris winkel : > Hi alexander, > > > > Found this on the internet > > > > But I am new to linux and I don’t know how add it to the openthinclient > > > > · Using Ubuntu 12.04 LTS. 64bit. Get the driver files from here: > https://sites.google.com/site/easylinuxtipsproject/sis > > The xorg drivers you can install in ubuntu software center won’t give you > anything higher than 1024×768 as it fails to recognize the SIS671 chipset > and falls back to the stock framebuffer. > Put the two binary files in the tarball from the site above, sis671_drv.so > and sis671_drv.la where the page above describes. Be sure to get the > correct package for 32bit vs 64bit to match the version of ubunty you are > running. Thus, I used the files in sis-64-bit-1204.tar.gz > > Don’t use the xorg.conf contained in the tarball, or if you do, it may not > work. It didn’t for me, and just hung. If it does don’t forget you can open > a console with Ctrl+Alt+F1 and login and copy / remove the xorg.conf and > get back to where you were before. > > Once you get back into the gui, go to the display settings and you should > see you can change the resolution up to 1920×1080. > > Here is my working xorg.conf that works and has a proper modeline for > 1920×1080. > > Section “Device” > Identifier “Configured Video Device” > Driver “sis671″ > EndSection > > Section “Monitor” > Identifier “Configured Monitor” > Modeline “1920x1080_60.00″ 173.00 1920 2048 2248 2576 1080 1083 1088 1120 > -hsync +vsync > EndSection > > Section “Screen” > Identifier “Default Screen” > Monitor “Configured Monitor” > Device “Configured Video Device” > DefaultDepth 24 > EndSection > > > > > > *From:* Stecher, Alexander [mailto:a.stec...@openthinclient.com] > *Sent:* donderdag 10 april 2014 11:46 > *To:* Mailingliste > *Subject:* Re: [openthinclient-user] request for more display drivers > > > > Please try to use Consus. > > Consus supports dual-screen. > > To add a driver: > - setup a build environment > - compile it in the kernel > > - if needed, some libraries have also to be updated > > > Alexander Stecher > -- > Dipl.-Ing. (BA) > Telefon: +49 711 1378636-1 > Handy: +49 151 2761 2961 > mailto:a.stec...@openthinclient.com > > > openthinclient gmbh > Heilbronner Str. 150, 70191 Stuttgart, Deutschland > Telefon: +49 711 1378636-0 > Telefax: +49 711 1378636-9 > Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 > Geschäftsführer: Alexander Stecher > http://openthinclient.com > > > > 2014-04-10 11:17 GMT+02:00 chris winkel : > > All, > > > > I have a dell OptiPlex FX160, > > > > The resolution will not get higher than 1024 X 743, > > > > Also I cannot use the dual screen mode ( vga + dvi ) , > > > > Can someone please tell me how to fix this or add drivers maybe? > > > > I hope someone can help me , I am really a fan of openthinclient > > > > Kind regards, > > > > Christian Winkel > > > > -- > Put Bad Developers to Shame > Dominate Development with Jenkins Continuous Integration > Continuously Automate Build, Test & Deployment > Start a new project now. Try Jenkins in the cloud. > http://p.sf.net/sfu/13600_Cloudbees > ___ > The Open Source Thin Client Solution http://openthinclient.org > openthinclient-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/openthinclient-user > > > > > -- > Put Bad Developers to Shame > Dominate Development with Jenkins Continuous Integration > Continuously Automate Build, Test & Deployment > Start a new project now. Try Jenkins in the cloud. > http://p.sf.net/sfu/13600_Cloudbees > ___ > The Open Source Thin Client Solution http://openthinclient.org > openthinclient-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/openthinclient-user > > ---
Re: [openthinclient-user] request for more display drivers
Hi alexander, Found this on the internet But I am new to linux and I don’t know how add it to the openthinclient · Using Ubuntu 12.04 LTS. 64bit. Get the driver files from here: https://sites.google.com/site/easylinuxtipsproject/sis The xorg drivers you can install in ubuntu software center won’t give you anything higher than 1024×768 as it fails to recognize the SIS671 chipset and falls back to the stock framebuffer. Put the two binary files in the tarball from the site above, sis671_drv.so and sis671_drv.la where the page above describes. Be sure to get the correct package for 32bit vs 64bit to match the version of ubunty you are running. Thus, I used the files in sis-64-bit-1204.tar.gz Don’t use the xorg.conf contained in the tarball, or if you do, it may not work. It didn’t for me, and just hung. If it does don’t forget you can open a console with Ctrl+Alt+F1 and login and copy / remove the xorg.conf and get back to where you were before. Once you get back into the gui, go to the display settings and you should see you can change the resolution up to 1920×1080. Here is my working xorg.conf that works and has a proper modeline for 1920×1080. Section “Device” Identifier “Configured Video Device” Driver “sis671″ EndSection Section “Monitor” Identifier “Configured Monitor” Modeline “1920x1080_60.00″ 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync EndSection Section “Screen” Identifier “Default Screen” Monitor “Configured Monitor” Device “Configured Video Device” DefaultDepth 24 EndSection From: Stecher, Alexander [mailto:a.stec...@openthinclient.com] Sent: donderdag 10 april 2014 11:46 To: Mailingliste Subject: Re: [openthinclient-user] request for more display drivers Please try to use Consus. Consus supports dual-screen. To add a driver: - setup a build environment - compile it in the kernel - if needed, some libraries have also to be updated Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com> openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 11:17 GMT+02:00 chris winkel mailto:ch...@ververexport.nl>>: All, I have a dell OptiPlex FX160, The resolution will not get higher than 1024 X 743, Also I cannot use the dual screen mode ( vga + dvi ) , Can someone please tell me how to fix this or add drivers maybe? I hope someone can help me , I am really a fan of openthinclient Kind regards, Christian Winkel -- Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees ___ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net<mailto:openthinclient-user@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/openthinclient-user -- Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees___ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user
Re: [openthinclient-user] request for more display drivers
Please try to use Consus. Consus supports dual-screen. To add a driver: - setup a build environment - compile it in the kernel - if needed, some libraries have also to be updated Alexander Stecher -- Dipl.-Ing. (BA) Telefon: +49 711 1378636-1 Handy: +49 151 2761 2961 mailto:a.stec...@openthinclient.com openthinclient gmbh Heilbronner Str. 150, 70191 Stuttgart, Deutschland Telefon: +49 711 1378636-0 Telefax: +49 711 1378636-9 Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher http://openthinclient.com 2014-04-10 11:17 GMT+02:00 chris winkel : > All, > > > > I have a dell OptiPlex FX160, > > > > The resolution will not get higher than 1024 X 743, > > > > Also I cannot use the dual screen mode ( vga + dvi ) , > > > > Can someone please tell me how to fix this or add drivers maybe? > > > > I hope someone can help me , I am really a fan of openthinclient > > > > Kind regards, > > > > Christian Winkel > > > -- > Put Bad Developers to Shame > Dominate Development with Jenkins Continuous Integration > Continuously Automate Build, Test & Deployment > Start a new project now. Try Jenkins in the cloud. > http://p.sf.net/sfu/13600_Cloudbees > ___ > The Open Source Thin Client Solution http://openthinclient.org > openthinclient-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/openthinclient-user > > -- Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees___ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user
Re: [openthinclient-user] request for more display drivers
Hi Chris I have a similar issue... I haven't updated my case with my latest findings but for now i have come to the conclution that perhap its my graphics drivers or lack of the right one that force my T5540 HP thin client to run in 1024*768...I just realized this like two min ago.. if you go to device and right click and choose new you can in type choose GFXcard ... which in the next menu will give you some choices in this regard.. my first test run here didn't go that well :) but i think you may have the same problem here..also read this.. its a good read!http://wiki.openthinclient.org/wiki/Monitor_configuration/enand it also touches the creation of gfxdrivers a littlebitGLFra: "chris winkel" Til: openthinclient-user@lists.sourceforge.netSendt: torsdag, 10. april 2014 11:17:41Emne: [openthinclient-user] request for more display drivers All, I have a dell OptiPlex FX160, The resolution will not get higher than 1024 X 743, Also I cannot use the dual screen mode ( vga + dvi ) , Can someone please tell me how to fix this or add drivers maybe? I hope someone can help me , I am really a fan of openthinclient Kind regards, Christian Winkel --Put Bad Developers to ShameDominate Development with Jenkins Continuous IntegrationContinuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud.http://p.sf.net/sfu/13600_Cloudbees___The Open Source Thin Client Solution http://openthinclient.orgopenthinclient-user@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/openthinclient-user-- Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees___ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user
[openthinclient-user] request for more display drivers
All, I have a dell OptiPlex FX160, The resolution will not get higher than 1024 X 743, Also I cannot use the dual screen mode ( vga + dvi ) , Can someone please tell me how to fix this or add drivers maybe? I hope someone can help me , I am really a fan of openthinclient Kind regards, Christian Winkel -- Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees___ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user
