[OpenWrt-Devel] [PATCH v3] ncm: add support to run via proto wwan
Signed-off-by: Aleksandr Kolesnik ner...@gmail.com
mailto:ner...@gmail.com
--- a/package/network/utils/comgt/files/ncm.sh
+++ b/package/network/utils/comgt/files/ncm.sh
@@ -27,6 +27,8 @@ proto_ncm_setup() {
local device apn auth username password pincode delay mode
json_get_vars device apn auth username password pincode delay
mode
+ [ -n $ctl_device ] device=$ctl_device
+
[ -n $device ] || {
echo No control device specified
proto_notify_error $interface NO_DEVICE
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] [PATCH v2] ncm: add support to run via proto wwan
Hi,
Is it OK now?
Signed-off-by: Aleksandr Kolesnik ner...@gmail.com
--- a/package/network/utils/comgt/files/ncm.sh
+++ b/package/network/utils/comgt/files/ncm.sh
@@ -27,6 +27,8 @@ proto_ncm_setup() {
local device apn auth username password pincode delay mode
json_get_vars device apn auth username password pincode delay mode
+ [ -n $ctl_device ] device=$ctl_device
+
[ -n $device ] || {
echo No control device specified
proto_notify_error $interface NO_DEVICE
2015-07-07 15:03 GMT+03:00 John Crispin blo...@openwrt.org:
Hi,
patch is generated against the wrong root folder. also your mail client
replaced tabs with spaces. please fix and resend the patch
John
On 22/04/2015 15:26, Aleksandr Kolesnik wrote:
Signed-off-by: Aleksandr Kolesnik ner...@gmail.com
mailto:ner...@gmail.com
--- package/network/utils/comgt/files/ncm.sh
+++ package/network/utils/comgt/files/ncm.sh
@@ -27,6 +27,8 @@ proto_ncm_setup() {
local device apn auth username password pincode delay mode
json_get_vars device apn auth username password pincode delay mode
+[ -n $ctl_device ] device=$ctl_device
+
[ -n $device ] || {
echo No control device specified
proto_notify_error $interface NO_DEVICE
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH v3] ncm: add support to run via proto wwan
Signed-off-by: Aleksandr Kolesnik ner...@gmail.com
--- a/package/network/utils/comgt/files/ncm.sh
+++ b/package/network/utils/comgt/files/ncm.sh
@@ -27,6 +27,8 @@ proto_ncm_setup() {
local device apn auth username password pincode delay mode
json_get_vars device apn auth username password pincode delay
mode
+ [ -n $ctl_device ] device=$ctl_device
+
[ -n $device ] || {
echo No control device specified
proto_notify_error $interface NO_DEVICE
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] [PATCH] luci-proto-wwan minimal support
I don't have enough time to test it on CC, but here is link http://goo.gl/zVP3yZ to try it. Just unzip and copy that files to your router, I little bit modified them to use on Luci-15.05, I think it should work. To Cezary: all depends on Jow. 2015-05-21 12:35 GMT+03:00 Adam Kuklycz ad...@mcservices.com.au: Or at least let us know how to apply the patch manually and I will add it into my unofficial builds that I make with the ar71xx platform. I'd love to see proper or even some sort of wwan support in the luci side of things. On 21/05/15 15:41, Cezary Jackiewicz wrote: Dnia 2015-04-22, o godz. 15:59:37 Aleksandr Kolesnik ner...@gmail.com napisał(a): Signed-off-by: Aleksandr Kolesnik ner...@gmail.com Hi, there is chance to to include this into 15.05? ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH] luci-proto-wwan minimal support
Signed-off-by: Aleksandr Kolesnik ner...@gmail.com
--- a/contrib/package/luci/Makefile
+++ b/contrib/package/luci/Makefile
@@ -194,6 +194,7 @@ $(eval $(call protocol,ipv6,Support for
$(eval $(call protocol,3g,Support for 3G,+PACKAGE_luci-proto-3g:comgt))
$(eval $(call protocol,hso,Support for HSO,+PACKAGE_luci-proto-hso:comgt
+PACKAGE_luci-proto-hso:kmod-usb-net
+PACKAGE_luci-proto-hso:kmod-usb-net-hso))
$(eval $(call protocol,relay,Support for relayd pseudo
bridges,+PACKAGE_luci-proto-relay:relayd))
+$(eval $(call protocol,wwan,Support for 3G/4g
wwan,+PACKAGE_luci-proto-wwan:wwan))
### Modules ###
--- a/modules/base/luasrc/model/network.lua
+++ b/modules/base/luasrc/model/network.lua
@@ -756,7 +756,11 @@ function protocol.ifname(self)
end
function protocol.proto(self)
- return none
+ local p = self:_ubus(proto)
+ if not p then
+ p = none
+ end
+ return p
end
function protocol.get_i18n(self)
@@ -934,7 +938,16 @@ function protocol.del_interface(self, if
end
function protocol.get_interface(self)
- if self:is_virtual() then
+ if self:is_virtual() and self:proto() == wwan then
+ local ldev = self:_ubus(l3_device)
+ if ldev then
+ _tunnel[ldev] = true
+ return interface(ldev, self)
+ else
+ _tunnel[self:proto() .. - .. self.sid] = true
+ return interface(self:proto() .. - .. self.sid, self)
+ end
+ elseif self:is_virtual() then
_tunnel[self:proto() .. - .. self.sid] = true
return interface(self:proto() .. - .. self.sid, self)
elseif self:is_bridge() then
--- /dev/null
+++ b/protocols/wwan/Makefile
@@ -0,0 +1,2 @@
+include ../../build/config.mk
+include ../../build/module.mk
--- /dev/null
+++ b/protocols/wwan/luasrc/model/cbi/admin_network/proto_wwan.lua
@@ -0,0 +1,130 @@
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2015 Aleksandr Kolesnik ner...@gmail.com
+
+Licensed under the Apache License, Version 2.0 (the License);
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+]]--
+
+local map, section, net = ...
+
+local apn, service, pincode, username, password
+local ipv6, maxwait, defaultroute, metric, peerdns, dns,
+ keepalive_failure, keepalive_interval, demand
+
+apn = section:taboption(general, Value, apn, translate(APN))
+
+
+pincode = section:taboption(general, Value, pincode, translate(PIN))
+
+
+username = section:taboption(general, Value, username,
translate(PAP/CHAP username))
+
+
+password = section:taboption(general, Value, password,
translate(PAP/CHAP password))
+password.password = true
+
+
+if luci.model.network:has_ipv6() then
+
+ ipv6 = section:taboption(advanced, Flag, ipv6,
+ translate(Enable IPv6 negotiation on the PPP link))
+
+ ipv6.default = ipv6.disabled
+
+end
+
+
+maxwait = section:taboption(advanced, Value, maxwait,
+ translate(Modem init timeout),
+ translate(Maximum amount of seconds to wait for the modem to become
ready))
+
+maxwait.placeholder = 20
+maxwait.datatype= min(1)
+
+
+defaultroute = section:taboption(advanced, Flag, defaultroute,
+ translate(Use default gateway),
+ translate(If unchecked, no default route is configured))
+
+defaultroute.default = defaultroute.enabled
+
+
+metric = section:taboption(advanced, Value, metric,
+ translate(Use gateway metric))
+
+metric.placeholder = 0
+metric.datatype= uinteger
+metric:depends(defaultroute, defaultroute.enabled)
+
+
+peerdns = section:taboption(advanced, Flag, peerdns,
+ translate(Use DNS servers advertised by peer),
+ translate(If unchecked, the advertised DNS server addresses are
ignored))
+
+peerdns.default = peerdns.enabled
+
+
+dns = section:taboption(advanced, DynamicList, dns,
+ translate(Use custom DNS servers))
+
+dns:depends(peerdns, )
+dns.datatype = ipaddr
+dns.cast = string
+
+
+keepalive_failure = section:taboption(advanced, Value,
_keepalive_failure,
+ translate(LCP echo failure threshold),
+ translate(Presume peer to be dead after given amount of LCP echo
failures, use 0 to ignore failures))
+
+function keepalive_failure.cfgvalue(self, section)
+ local v = m:get(section, keepalive)
+ if v and #v 0 then
+ return tonumber(v:match(^(%d+)[ ,]+%d+) or v)
+ end
+end
+
+function keepalive_failure.write() end
+function keepalive_failure.remove() end
+
+keepalive_failure.placeholder = 0
+keepalive_failure.datatype= uinteger
+
+
+keepalive_interval = section:taboption(advanced, Value,
_keepalive_interval,
+ translate(LCP echo interval),
+ translate(Send LCP echo requests at the given interval in seconds, only
effective in conjunction with failure threshold))
+
+function keepalive_interval.cfgvalue(self, section)
+ local v = m:get(section, keepalive)
+ if v and #v 0 then
+ return tonumber(v:match(^%d+[ ,]+(%d+)))
+ end
+end
+
+function keepalive_interval.write(self, section, value)
+ local f = tonumber(keepalive_failure:formvalue(section)) or 0
+ local i = tonumber(value) or 5
+ if i 1 then i = 1 end
+ if f 0 then
+ m:set(section, keepalive, %d %d %{ f, i
[OpenWrt-Devel] [PATCH] comgt-ncm: add support run via proto wwan
Signed-off-by: Aleksandr Kolesnik ner...@gmail.com
--- package/network/utils/comgt/files/ncm.sh 2015-04-16 23:59:02.606193538
+0300
+++ package/network/utils/comgt/files/ncm.sh 2015-04-22 14:15:34.0
+0300
@@ -27,6 +27,8 @@ proto_ncm_setup() {
local device apn auth username password pincode delay mode
json_get_vars device apn auth username password pincode delay mode
+ [ -n $ctl_device ] device=$ctl_device
+
[ -n $device ] || {
echo No control device specified
proto_notify_error $interface NO_DEVICE
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH v2] ncm: add support to run via proto wwan
Signed-off-by: Aleksandr Kolesnik ner...@gmail.com
--- package/network/utils/comgt/files/ncm.sh
+++ package/network/utils/comgt/files/ncm.sh
@@ -27,6 +27,8 @@ proto_ncm_setup() {
local device apn auth username password pincode delay mode
json_get_vars device apn auth username password pincode delay mode
+ [ -n $ctl_device ] device=$ctl_device
+
[ -n $device ] || {
echo No control device specified
proto_notify_error $interface NO_DEVICE
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [patch ] comgt-ncm: add support run via proto wwan
Signed-off-by: Aleksandr Kolesnik ner...@gmail.com
--- package/network/utils/comgt/files/ncm.sh 2015-04-16 23:59:02.606193538
+0300
+++ package/network/utils/comgt/files/ncm.sh 2015-04-22 14:15:34.0
+0300
@@ -27,6 +27,8 @@ proto_ncm_setup() {
local device apn auth username password pincode delay mode
json_get_vars device apn auth username password pincode delay mode
+ [ -n $ctl_device ] device=$ctl_device
+
[ -n $device ] || {
echo No control device specified
proto_notify_error $interface NO_DEVICE
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] How to use ethernet port as lan or wan port in WR703N
look this topic https://forum.openwrt.org/viewtopic.php?id=48907 and https://forum.openwrt.org/viewtopic.php?id=48892 looks like ath_register_eth(1) not selected, so device detect only one wan port 2014-02-18 0:23 GMT+02:00 camden lindsay camden.lindsay+open...@gmail.com: It sounds like you have to re-configure the switch, to have the port that is currently 'wan' on the same vlan as the LAN. see http://wiki.openwrt.org/doc/uci/network/switch On Mon, Feb 17, 2014 at 2:04 PM, jonsm...@gmail.com jonsm...@gmail.com wrote: On Mon, Feb 17, 2014 at 4:48 PM, Hartmut Knaack knaac...@gmx.de wrote: jonsm...@gmail.com schrieb: The switch (esw) configuration separates the LAN and WAN ports. But according to the wiki, the 703n has only one ethernet port and no switch. AR9331 has the switch on chip. http://www.eeboard.com/wp-content/uploads/downloads/2013/08/AR9331.pdf On Mon, Feb 17, 2014 at 4:07 PM, Hartmut Knaack knaac...@gmx.de wrote: bjzhougong schrieb: Dear Sirs. As we know, we can configure network.lan.interface or network.wan.interface as eth0 to use ethernet port as lan or wan port on WR703N. I think it should need to do anything in driver for switch ethernet port, and I want to know what happened between user space and kernel space after we run /etc/init.d/network restart, Thanks for any idea about this! If there is any help? Thanks! Not sure, what exactly you want to know. When running /etc/init.d/network restart, all the configured options in /etc/config/network get configured. See http://wiki.openwrt.org/doc/uci/network for more information about available options. When changing a certain network device from WAN to LAN, it is mainly about switching the configuration from being DHCP master or slave, and some routing configurations. -- bjzhougong ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel -- Jon Smirl jonsm...@gmail.com ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] How to use ethernet port as lan or wan port in WR703N
you need to build own image where enable eth1 port. eth1 connected to internal switch. Read topics https://forum.openwrt.org/viewtopic.php?id=48907 and https://forum.openwrt.org/viewtopic.php?id=48892 2014-02-18 15:04 GMT+02:00 bjzhougong bjzhoug...@126.com: Thanks for All but in WR703N's network config, it doesn't has switch: config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config interface 'lan' #option ifname 'eth0' option type 'bridge' option proto 'static' option ipaddr '192.168.22.1' option netmask '255.255.255.0' config interface 'wan' option ifname 'eth0' option proto 'dhcp' -- bjzhougong *From:* camden lindsay camden.lindsay+open...@gmail.com *Date:* 2014-02-18 06:23 *To:* OpenWrt Development List openwrt-devel@lists.openwrt.org *CC:* bjzhougong bjzhoug...@126.com *Subject:* Re: [OpenWrt-Devel] How to use ethernet port as lan or wan port in WR703N It sounds like you have to re-configure the switch, to have the port that is currently 'wan' on the same vlan as the LAN. see http://wiki.openwrt.org/doc/uci/network/switch On Mon, Feb 17, 2014 at 2:04 PM, jonsm...@gmail.com jonsm...@gmail.com wrote: On Mon, Feb 17, 2014 at 4:48 PM, Hartmut Knaack knaac...@gmx.de wrote: jonsm...@gmail.com schrieb: The switch (esw) configuration separates the LAN and WAN ports. But according to the wiki, the 703n has only one ethernet port and no switch. AR9331 has the switch on chip. http://www.eeboard.com/wp-content/uploads/downloads/2013/08/AR9331.pdf On Mon, Feb 17, 2014 at 4:07 PM, Hartmut Knaack knaac...@gmx.de wrote: bjzhougong schrieb: Dear Sirs. As we know, we can configure network.lan.interface or network.wan.interface as eth0 to use ethernet port as lan or wan port on WR703N. I think it should need to do anything in driver for switch ethernet port, and I want to know what happened between user space and kernel space after we run /etc/init.d/network restart, Thanks for any idea about this! If there is any help? Thanks! Not sure, what exactly you want to know. When running /etc/init.d/network restart, all the configured options in /etc/config/network get configured. See http://wiki.openwrt.org/doc/uci/network for more information about available options. When changing a certain network device from WAN to LAN, it is mainly about switching the configuration from being DHCP master or slave, and some routing configurations. -- bjzhougong ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel -- Jon Smirl jonsm...@gmail.com ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] init script runs after S99sysctl?
http://wiki.openwrt.org/doc/techref/hotplug
2013/12/2 John Crispin j...@phrozen.org
On 02/12/13 08:02, Le Tran Dat wrote:
Hi Aleksandr,
Many thanks for your help, I added my script to /etc/rc.local and it
works like a cham. I haven't known about this script before.
I don't know this too, I will check it later.
or if you need change iptables everytime after some interface (ex
WAN) going up, you can easily create script in /etc/hotplug.d/iface/
directory where add :
[ ifup = $ACTION ] [ $INTERFACE = WAN ] {
#here add yours iptables
}
I am using CoovaChilli's up.sh script to change iptables everytime
TUN/TAP interface going up but it somehow does not work as expected if I
do reboot. That's why I want to restart the CoovaChilli to apply up.sh
iptales rule. Anyway, It is just a work-around solution, I have to check
why up.sh does not work...
Thanks,
Dat
Hi,
/etc/hotplug.d/net or /etc/hotplug.d/iface would be a more correct place
for the script
John
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH] ar71xx: Compex WPE72 network leds, button and partition change for AA.
Sorry, last patch has mistake. This patch add two network leds, which wasn't included before. Change button problem by adding active_low value. Adding compex partition table changes for AA. https://dev.openwrt.org/ticket/14096 https://dev.openwrt.org/ticket/12475 Signed-off-by: Aleksandr Kolesnik ner...@gmail.com wpeFULL.patch Description: Binary data ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH] ar71xx: myloader partition table resizing
Make more space for kernel part. Add new firmware partition [mkmylofw] Error: file /home/user/wpe72-12.09.1/build_dir/linux-ar71xx_generic/tmp/vmlinux-wpe72.bin.lzma is too big make[5]: [install] Error 1 (ignored) New table solved this problem, also it have firmware partition. https://dev.openwrt.org/ticket/14096 Signed-off-by: Aleksandr Kolesnik ner...@gmail.com myloader.patch Description: Binary data ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH] ar71xx: Compex myloader partition table resizing
Make more space for kernel part. Add new firmware partition [mkmylofw] Error: file /home/user/wpe72-12.09.1/build_dir/linux-ar71xx_generic/tmp/vmlinux-wpe72.bin.lzma is too big make[5]: [install] Error 1 (ignored) New table solved this problem, also it have firmware partition. https://dev.openwrt.org/ticket/14096 Signed-off-by: Aleksandr Kolesnik ner...@gmail.com Index: trunk/target/linux/ar71xx/image/Makefile === --- trunk/target/linux/ar71xx/image/Makefile (revision 38267) +++ trunk/target/linux/ar71xx/image/Makefile (working copy) @@ -409,8 +409,9 @@ define Image/Build/MyLoader -$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) \ - -p0x03:0xe:al:0x8006:kernel:$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ - -p0x11:0:::rootfs:$(KDIR)/root.$(1) \ + -p0x03:0x10:al:0x8006:kernel:$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ + -p0x13:0:::rootfs:$(KDIR)/root.$(1) \ + -p0x03:0:::firmware \ $(call imgname,$(1),$(2))-$(5)-factory.img endef myloader.patch Description: Binary data ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH] [ar71xx] myloader partition table update (resizing)
Default kernel size is bigger than partition table have. [mkmylofw] Error: file /home/user/wpe72-12.09.1/build_dir/linux-ar71xx_generic/tmp/vmlinux-wpe72.bin.lzma is too big make[5]: [install] Error 1 (ignored) New table solved this problem, also it have firmware partition. https://dev.openwrt.org/ticket/14096 Best regards, Aleksandr Kolesnik myloader.patch Description: Binary data ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH] ar71xx: myloader partition table resizing
Give more size for Kernel part Signed-off-by: Aleksandr Kolesnik ner...@gmail.com myloader.patch Description: Binary data ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
