Hi! I've got some problems with new 4.4 kernel on ar711 with my WZR-HP-AG300H. Please just take this as a notice, I know it's testing ;-) If you need more testing, I'm available.
André Here's the log: console=ttyS0,115200 root=31:03 rootfstype=jffs2 init=/sbin/init mtdparts=ar7100-nor0:256k(u-boot),64k(u-boot-env),1152k@384k(uImage),6592k@1536k(rootfs),64k@320k(ART),64k@8128k(properties),8192k@8192k(flash1),M ## Booting image at bf060000 ... Image Name: MIPS OpenWrt Linux-4.4 Created: 2016-01-30 21:45:43 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1402157 Bytes = 1.3 MB Load Address: 80060000 Entry Point: 80060000 Verifying Checksum ... crc32_fw: bf060040 - bf1b656c (len:0015652d) calc... crc32_fw: range1 bf060040 - bf1b656c OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80060000) ... ## Giving linux memsize in bytes, 134217728 Starting kernel ... [ 0.000000] Linux version 4.4.0 (avalen...@nixdevel.ad.ddimension.net) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r48531) ) #1 Sat Jan 30 21:45:32 UTC 2016 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR7161 rev 2 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] No valid device tree found, continuing without [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Reserving 0MB of memory at 0MB for crashkernel [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: board=WZR-HP-AG300H console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 125064K/131072K available (3127K kernel code, 156K rwdata, 648K rodata, 284K init, 213K bss, 6008K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5621354254 ns [ 0.000008] sched_clock: 32 bits at 340MHz, resolution 2ns, wraps every 6316128254ns [ 0.007737] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992) [ 0.070375] pid_max: default: 32768 minimum: 301 [ 0.075074] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.081595] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089325] Initializing cgroup subsys io [ 0.093284] Initializing cgroup subsys devices [ 0.097666] Initializing cgroup subsys freezer [ 0.102081] Initializing cgroup subsys net_cls [ 0.106505] Initializing cgroup subsys pids [ 0.111981] devtmpfs: initialized [ 0.115925] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.126352] NET: Registered protocol family 16 [ 0.131647] MIPS: machine is Buffalo WZR-HP-AG300H/WZR-600DHP [ 2.777559] registering PCI controller with io_map_base unset [ 2.790904] PCI host bridge to bus 0000:00 [ 2.794968] pci_bus 0000:00: root bus resource [mem 0x10000000-0x16ffffff] [ 2.801754] pci_bus 0000:00: root bus resource [io 0x0000] [ 2.807306] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 2.814050] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.822006] pci 0000:00:11.0: fixup device configuration [ 2.828688] pci 0000:00:12.0: fixup device configuration [ 2.835385] pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff] [ 2.842075] pci 0000:00:12.0: BAR 0: assigned [mem 0x10010000-0x1001ffff] [ 2.848856] pci 0000:00:11.0: using irq 40 for pin 1 [ 2.853756] pci 0000:00:12.0: using irq 41 for pin 1 [ 2.859447] clocksource: Switched to clocksource MIPS [ 2.868345] NET: Registered protocol family 2 [ 2.873464] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 2.880397] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 2.886667] TCP: Hash tables configured (established 1024 bind 1024) [ 2.893083] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 2.898830] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 2.905314] NET: Registered protocol family 1 [ 2.910501] futex hash table entries: 256 (order: -1, 3072 bytes) [ 2.929097] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.934901] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 2.946965] io scheduler noop registered [ 2.950859] io scheduler deadline registered (default) [ 2.956647] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled �[ 2.987465] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 10625000) is a 16550A [ 2.996083] console [ttyS0] enabled [ 2.996083] console [ttyS0] enabled [ 3.002999] bootconsole [early0] disabled [ 3.002999] bootconsole [early0] disabled [ 3.013458] m25p80 spi0.0: found w25q128, expected m25p80 [ 3.018861] m25p80 spi0.0: w25q128 (16384 Kbytes) [ 3.026299] m25p80 spi0.1: found w25q128, expected m25p80 [ 3.031754] m25p80 spi0.1: w25q128 (16384 Kbytes) [ 3.040647] Concatenating MTD devices: [ 3.044398] (0): "spi0.0" [ 3.047011] (1): "spi0.1" [ 3.049659] into device "flash" [ 3.052803] Creating 5 MTD partitions on "flash": [ 3.057503] 0x000000000000-0x000000040000 : "u-boot" [ 3.065576] switch0: Atheros AR8316 rev. 1 switch registered on ag71xx-mdio.0 [ 3.075753] libphy: ag71xx_mdio: probed [ 3.081369] 0x000000040000-0x000000050000 : "u-boot-env" [ 3.088439] 0x000000050000-0x000000060000 : "art" [ 3.094991] 0x000000060000-0x000001ff0000 : "firmware" [ 3.190189] 2 uimage-fw partitions found on MTD device firmware [ 3.196110] 0x000000060000-0x0000001b656d : "kernel" [ 3.202566] 0x0000001b656d-0x000001ff0000 : "rootfs" [ 3.209293] mtd: device 7 (rootfs) set to be root filesystem [ 3.215057] 1 squashfs-split partitions found on MTD device rootfs [ 3.221242] 0x000001790000-0x000001ff0000 : "rootfs_data" [ 3.228451] 0x000001ff0000-0x000002000000 : "user_property" [ 3.400821] ar8316: Using port 4 as switch port [ 3.435260] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316] [ 3.446435] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII [ 3.770815] ar8316: Using port 4 as PHY [ 4.811571] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316] [ 4.822769] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RGMII [ 4.830997] NET: Registered protocol family 10 [ 4.838214] NET: Registered protocol family 17 [ 4.842782] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 4.855482] 8021q: 802.1Q VLAN Support v1.8 [ 4.870396] VFS: Mounted root (squashfs filesystem) readonly on device 31:7. [ 4.878306] Freeing unused kernel memory: 284K (80439000 - 80480000) [ 6.978793] init: Console is alive [ 6.982604] init: - watchdog - [ 9.237529] usbcore: registered new interface driver usbfs [ 9.243152] usbcore: registered new interface driver hub [ 9.248523] usbcore: registered new device driver usb [ 9.257859] Button Hotplug driver version 0.4.1 [ 9.271478] SCSI subsystem initialized [ 9.280491] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.288373] ehci-platform: EHCI generic platform driver [ 9.293719] ehci-platform ehci-platform: EHCI Host Controller [ 9.299503] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 9.307516] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 9.329539] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 9.336696] hub 1-0:1.0: USB hub found [ 9.340792] hub 1-0:1.0: 2 ports detected [ 9.346481] ehci-pci: EHCI PCI platform driver [ 9.355173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.362655] ohci-platform: OHCI generic platform driver [ 9.367951] ohci-platform ohci-platform: Generic Platform OHCI controller [ 9.374810] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2 [ 9.382804] ohci-platform ohci-platform: irq 14, io mem 0x1c000000 [ 9.444395] hub 2-0:1.0: USB hub found [ 9.448427] hub 2-0:1.0: 2 ports detected [ 9.454823] uhci_hcd: USB Universal Host Controller Interface driver [ 9.473894] usbcore: registered new interface driver usb-storage [ 9.481150] Error: Driver 'gpio-keys-polled' is already registered, aborting... 4[ 10.043002] init: - preinit - [ 10.639997] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.818917] random: procd urandom read with 17 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 11.073781] mount_root: loading kmods from internal overlay [ 11.133098] Error: Driver 'gpio-keys-polled' is already registered, aborting... [ 11.141826] kmodloader: 1 module could not be probed [ 11.147023] kmodloader: - gpio_keys_polled - 0 [ 12.258521] jffs2_scan_eraseblock(): End of filesystem marker found at 0x60000 [ 12.265787] jffs2_build_filesystem(): unlocking the mtd device... done. [ 12.272407] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 12.670044] eth0: link up (1000Mbps/Full duplex) [ 12.674697] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready BUFFALO U-BOOT Ver 1.01 == CPU:680MHz, DDR:340MHz, AHB:170MHz == AP96 (ar7100) U-boot 0.0.1 DRAM: 128 MB _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel